Abstract: Many environment specific methods and systems for Robot Navigation exist. However vast strides in the evolution of navigation technologies and system techniques create the need for a general unified framework that is scalable, modular and dynamic. In this paper a Unified Framework for a Robust Conflict-free Robot Navigation System that can be used for either a structured or unstructured and indoor or outdoor environments has been proposed. The fundamental design aspects and implementation issues encountered during the development of the module are discussed. The results of the deployment of three major peripheral modules of the framework namely the GSM based communication module, GIS Module and GPS module are reported in this paper.
Abstract: Hierarchical high-level PNs (HHPNs) with time
versions are a useful tool to model systems in a variety of application
domains, ranging from logistics to complex workflows. This paper
addresses an application domain which is receiving more and more
attention: procedure that arranges the final inpatient charge in
payment-s office and their management. We shall prove that Petri net
based analysis is able to improve the delays during the procedure, in
order that inpatient charges could be more reliable and on time.
Abstract: This study proposes a materials procurement contracts
model to which the zero-cost collar option is applied for heading price
fluctuation risks in construction.The material contract model based on
the collar option that consists of the call option striking zone of the
construction company(the buyer) following the materials price
increase andthe put option striking zone of the material vendor(the
supplier) following a materials price decrease. This study first
determined the call option strike price Xc of the construction company
by a simple approach: it uses the predicted profit at the project starting
point and then determines the strike price of put option Xp that has an
identical option value, which completes the zero-cost material
contract.The analysis results indicate that the cost saving of the
construction company increased as Xc decreased. This was because the
critical level of the steel materials price increasewas set at a low level.
However, as Xc decreased, Xpof a put option that had an identical
option value gradually increased. Cost saving increased as Xc
decreased. However, as Xp gradually increased, the risk of loss from a
construction company increased as the steel materials price decreased.
Meanwhile, cost saving did not occur for the construction company,
because of volatility. This result originated in the zero-cost features of
the two-way contract of the collar option. In the case of the regular
one-way option, the transaction cost had to be subtracted from the cost
saving. The transaction cost originated from an option value that
fluctuated with the volatility. That is, the cost saving of the one-way
option was affected by the volatility. Meanwhile, even though the
collar option with zero transaction cost cut the connection between
volatility and cost saving, there was a risk of exercising the put option.
Abstract: In this paper, we propose a hardware and software
design method for automotive Electronic Control Units (ECU)
considering the functional safety. The proposed ECU is considered for
the application to Electro-Mechanical Actuator systems and the
validity of the design method is shown by the application to the
Electro-Mechanical Brake (EMB) control system which is used as a
brake actuator in Brake-By-Wire (BBW) systems. The importance of a
functional safety-based design approach to EMB ECU design has been
emphasized because of its safety-critical functions, which are executed
with the aid of many electric actuators, sensors, and application
software. Based on hazard analysis and risk assessment according to
ISO26262, the EMB system should be ASIL-D-compliant, the highest
ASIL level. To this end, an external signature watchdog and an
Infineon 32-bit microcontroller TriCore are used to reduce risks
considering common-cause hardware failure. Moreover, a software
design method is introduced for implementing functional
safety-oriented monitoring functions based on an asymmetric dual
core architecture considering redundancy and diversity. The validity
of the proposed ECU design approach is verified by using the EMB
Hardware-In-the-Loop (HILS) system, which consists of the EMB
assembly, actuator ECU, a host PC, and a few debugging devices.
Furthermore, it is shown that the existing sensor fault tolerant control
system can be used more effectively for mitigating the effects of
hardware and software faults by applying the proposed ECU design
method.
Abstract: In this paper, a new approach for target recognition based on the Empirical mode decomposition (EMD) algorithm of Huang etal. [11] and the energy tracking operator of Teager [13]-[14] is introduced. The conjunction of these two methods is called Teager-Huang analysis. This approach is well suited for nonstationary signals analysis. The impulse response (IR) of target is first band pass filtered into subsignals (components) called Intrinsic mode functions (IMFs) with well defined Instantaneous frequency (IF) and Instantaneous amplitude (IA). Each IMF is a zero-mean AM-FM component. In second step, the energy of each IMF is tracked using the Teager energy operator (TEO). IF and IA, useful to describe the time-varying characteristics of the signal, are estimated using the Energy separation algorithm (ESA) algorithm of Maragos et al .[16]-[17]. In third step, a set of features such as skewness and kurtosis are extracted from the IF, IA and IMF energy functions. The Teager-Huang analysis is tested on set of synthetic IRs of Sonar targets with different physical characteristics (density, velocity, shape,? ). PCA is first applied to features to discriminate between manufactured and natural targets. The manufactured patterns are classified into spheres and cylinders. One hundred percent of correct recognition is achieved with twenty three echoes where sixteen IRs, used for training, are free noise and seven IRs, used for testing phase, are corrupted with white Gaussian noise.
Abstract: In this work, we are interested in developing a speech denoising tool by using a discrete wavelet packet transform (DWPT). This speech denoising tool will be employed for applications of recognition, coding and synthesis. For noise reduction, instead of applying the classical thresholding technique, some wavelet packet nodes are set to zero and the others are thresholded. To estimate the non stationary noise level, we employ the spectral entropy. A comparison of our proposed technique to classical denoising methods based on thresholding and spectral subtraction is made in order to evaluate our approach. The experimental implementation uses speech signals corrupted by two sorts of noise, white and Volvo noises. The obtained results from listening tests show that our proposed technique is better than spectral subtraction. The obtained results from SNR computation show the superiority of our technique when compared to the classical thresholding method using the modified hard thresholding function based on u-law algorithm.
Abstract: The current education system in India is adept in
equipping and assessing the scholastic development of children.
However, there is an immediate need to strengthen co-scholastic
areas like life-skills, values and attitudes to equip students to face real
life challenges. Audio-visual technology and their respective media
can make a significant contribution to a value based learning
curriculum. Thus, co-scholastic skills need to be effectively nurtured
by a medium that is entertaining and impactful. Films in general have
a tremendous impact in our society. Films with a positive message
make a formidable learning experience that can influence and inspire
generations of learners. Leveraging on this powerful medium,
EduMedia India Pvt. Ltd. has introduced School Cinema a well
researched film-based learning module supported by a fun and
exciting workbook, designed to introduce and reaffirm life-skills and
values to children, thereby having a positive influence on their
attitudes.
Abstract: This Paper proposes a new facial feature extraction approach, Wash-Hadamard Transform (WHT). This approach is based on correlation between local pixels of the face image. Its primary advantage is the simplicity of its computation. The paper compares the proposed approach, WHT, which was traditionally used in data compression with two other known approaches: the Principal Component Analysis (PCA) and the Discrete Cosine Transform (DCT) using the face database of Olivetti Research Laboratory (ORL). In spite of its simple computation, the proposed algorithm (WHT) gave very close results to those obtained by the PCA and DCT. This paper initiates the research into WHT and the family of frequency transforms and examines their suitability for feature extraction in face recognition applications.
Abstract: It is important problems to increase the detection rates
and reduce false positive rates in Intrusion Detection System (IDS).
Although preventative techniques such as access control and
authentication attempt to prevent intruders, these can fail, and as a
second line of defence, intrusion detection has been introduced. Rare
events are events that occur very infrequently, detection of rare
events is a common problem in many domains. In this paper we
propose an intrusion detection method that combines Rough set and
Fuzzy Clustering. Rough set has to decrease the amount of data and
get rid of redundancy. Fuzzy c-means clustering allow objects to
belong to several clusters simultaneously, with different degrees of
membership. Our approach allows us to recognize not only known
attacks but also to detect suspicious activity that may be the result of
a new, unknown attack. The experimental results on Knowledge
Discovery and Data Mining-(KDDCup 1999) Dataset show that the
method is efficient and practical for intrusion detection systems.
Abstract: The presented article deals with the description of a
numerical model of a corridor at a Central Interim Spent Fuel Storage
Facility (hereinafter CISFSF). The model takes into account the
effect of air flows on the temperature of stored waste. The
computational model was implemented in the ANSYS/CFX
programming environment in the form of a CFD task solution, which
was compared with an approximate analytical calculation. The article
includes a categorization of the individual alternatives for the
ventilation of such underground systems. The aim was to evaluate a
ventilation system for a CISFSF with regard to its stability and
capacity to provide sufficient ventilation for the removal of heat
produced by stored casks with spent nuclear fuel.
Abstract: The study of interaction among the grain, moisture,
and the surrounding space (air) is key to understanding the graindrying
process. In Iran, rice (mostly Indica type) is dried by flat
bed type dryer until the final MC reaches to 6 to 8%. The
experiments were conducted to examine the effect of application of
discharge fan with different heights of paddy on the drying
efficiency. Experiments were designed based on two different
configurations of the drying methods; with and without discharge
fan with three different heights of paddy including; 5, 10, and 15
cm. The humid heated air will be going out immediately by the
suction of discharge fan. The drying time is established upon the
average final MC to achieve about 8%. To save energy and reduce
the drying time, the distribution of temperature between layers
should be fast and uniform with minimum difference; otherwise
the difference of MC gradient between layers will be high and will
induce grain breakage. The difference of final MC between layers
in the two methods was 48-73%. The steady state of temperature
between the two methods has saved time in the range of 10-20%,
and the efficiency of temperature distribution increased 17-26% by
the use of discharge fan.
Abstract: Coverage is one of the main research interests in wireless sensor networks (WSN), it is used to determine the quality of service (QoS) of the networks. Therefore this paper aims to review the common strategies use in solving coverage problem in WSN. The strategies studied are used during deployment phase where the coverage is calculated based on the placement of the sensors on the region of interest (ROI). The strategies reviewed are categorized into three groups based on the approaches used, namely; force based, grid based or computational geometry based approach.
Abstract: In the past many uneconomic solutions for limitation
and interruption of short-circuit currents in low power applications
have been introduced, especially polymer switch based on the
positive temperature coefficient of resistance (PCTR) concept.
However there are many limitations in the active material, which
consists of conductive fillers. This paper presents a significantly
improved and simplified approach that replaces the existing current
limiters with faster switching elements. Its elegance lies in the
remarkable simplicity and low-cost processes of producing the device
using polyaniline (PANI) doped with methane-sulfonic acid (MSA).
Samples characterized as lying in the metallic and critical regimes of
metal insulator transition have been studied by means of electrical
performance in the voltage range from 1V to 5 V under different
environmental conditions. Moisture presence is shown to increase the
resistivity and also improved its current limiting performance.
Additionally, the device has also been studied for electrical resistivity
in the temperature range 77 K-300 K. The temperature dependence of
the electrical conductivity gives evidence for a transport mechanism
based on variable range hopping in three dimensions.
Abstract: This paper applies fuzzy AHP to evaluate the service
quality of online auction. Service quality is a composition of various
criteria. Among them many intangible attributes are difficult to
measure. This characteristic introduces the obstacles for respondents
on reply in the survey. So as to overcome this problem, we invite
fuzzy set theory into the measurement of performance and use AHP in
obtaining criteria. We found the most concerned dimension of service
quality is Transaction Safety Mechanism and the least is Charge Item.
Other criteria such as information security, accuracy and information
are too vital.
Abstract: In recent years, the use of vector variance as a
measure of multivariate variability has received much attention in
wide range of statistics. This paper deals with a more economic
measure of multivariate variability, defined as vector variance minus
all duplication elements. For high dimensional data, this will increase
the computational efficiency almost 50 % compared to the original
vector variance. Its sampling distribution will be investigated to make
its applications possible.
Abstract: Modular multiplication is the basic operation
in most public key cryptosystems, such as RSA, DSA, ECC,
and DH key exchange. Unfortunately, very large operands
(in order of 1024 or 2048 bits) must be used to provide
sufficient security strength. The use of such big numbers
dramatically slows down the whole cipher system, especially
when running on embedded processors.
So far, customized hardware accelerators - developed on
FPGAs or ASICs - were the best choice for accelerating
modular multiplication in embedded environments. On the
other hand, many algorithms have been developed to speed
up such operations. Examples are the Montgomery modular
multiplication and the interleaved modular multiplication
algorithms. Combining both customized hardware with
an efficient algorithm is expected to provide a much faster
cipher system.
This paper introduces an enhanced architecture for computing
the modular multiplication of two large numbers X
and Y modulo a given modulus M. The proposed design is
compared with three previous architectures depending on
carry save adders and look up tables. Look up tables should
be loaded with a set of pre-computed values. Our proposed
architecture uses the same carry save addition, but replaces
both look up tables and pre-computations with an enhanced
version of sign detection techniques. The proposed architecture
supports higher frequencies than other architectures.
It also has a better overall absolute time for a single operation.
Abstract: The city of Melbourne in Victoria, Australia, provides a number of examples of how a growing city can integrate urban planning and water planning to achieve sustainable urban development, environmental protection, liveability and integrated water management outcomes, and move towards becoming a “Water Sensitive City". Three examples are provided - the development at Botanic Ridge, where a 318 hectare residential development is being planned and where integrated water management options are being implemented using a “triple bottom line" sustainability investment approach; the Toolern development, which will capture and reuse stormwater and recycled water to greatly reduce the suburb-s demand for potable water, and the development at Kalkallo where a 1,200 hectare industrial precinct development is planned which will merge design of the development's water supply, sewerage services and stormwater system. The Paper argues that an integrated urban planning and water planning approach is fundamental to creating liveable, vibrant communities which meet social and financial needs while being in harmony with the local environment. Further work is required on developing investment frameworks and risk analysis frameworks to ensure that all possible solutions can be assessed equally.
Abstract: This research details a Computational Fluid Dynamics (CFD) approach to model fluid flow in a journal bearing with 8 equispaced semi-circular axial grooves. Water is used as the lubricant and is fed from one end of the bearing to the other, under pressure. The geometry of the bearing is modeled using a commercially available modeling software GAMBIT and the flow analysis is performed using a dedicated CFD analysis software FLUENT. The pressure distribution in the bearing clearance is obtained from FLUENT for various whirl ratios and is used to calculate the hydrodynamic force components in the radial and tangential direction of the bearing. These values along with the various whirl speeds can be used to do a regression analysis to determine the stiffness and damping coefficients. The values obtained are then compared with the stiffness and damping coefficients of a 3 Axial groove water lubricated journal bearing and those obtained from a FORTRAN code for a similar bearing.
Abstract: This paper discusses a curriculum approach that will
give emphasis on practical portions of teaching network security
subjects in information and communication technology courses. As
we are well aware, the need to use a practice and application oriented
approach in education is paramount. Research on active learning and
cooperative groups have shown that students grasps more and have
more tendency towards obtaining and realizing soft skills like
leadership, communication and team work as opposed to the more
traditional theory and exam based teaching and learning. While this
teaching and learning paradigm is relatively new in Malaysia, it has
been practiced widely in the West. This paper examines a certain
approach whereby students learning wireless security are divided into
and work in small and manageable groups where there will be 2
teams which consist of black hat and white hat teams. The former
will try to find and expose vulnerabilities in a wireless network while
the latter will try their best to prevent such attacks on their wireless
networks using hardware, software, design and enforcement of
security policy and etc. This paper will try to show that the approach
taken plus the use of relevant and up to date software and hardware
and with suitable environment setting will hopefully expose students
to a more fruitful outcome in terms of understanding of concepts,
theories and their motivation to learn.
Abstract: The utility of expert system generators has been
widely recognized in many applications. Several generators based on
concept of the paradigm object, have been recently proposed. The
generator of oriented object expert system (GSEOO) offers
languages that are often complex and difficult to use. We propose in
this paper an extension of the expert system generator, JESS, which
permits a friendly use of this expert system. The new tool, called
VISUAL JESS, bring two main improvements to JESS. The first
improvement concerns the easiness of its utilization while giving
back transparency to the syntax and semantic aspects of the JESS
programming language. The second improvement permits an easy
access and modification of the JESS knowledge basis. The
implementation of VISUAL JESS is made so that it is extensible and
portable.