Abstract: The purpose of this study was to understand the main
sources of copper (Cu) accumulation in target organs of tilapia
(Oreochromis mossambicus) and to investigate how the organism
mediate the process of Cu accumulation under prolonged conditions.
By measuring both dietary and waterborne Cu accumulation and total
concentrations in tilapia with biokinetic modeling approach, we were
able to clarify the biokinetic coping mechanisms for the long term Cu
accumulation. This study showed that water and food are both the
major source of Cu for the muscle and liver of tilapia. This implied
that control the Cu concentration in these two routes will be correlated
to the Cu bioavailability for tilapia. We found that exposure duration
and level of waterborne Cu drove the Cu accumulation in tilapia. The
ability for Cu biouptake and depuration in organs of tilapia were
actively mediated under prolonged exposure conditions. Generally,
the uptake rate, depuration rate and net bioaccumulation ability in all
selected organs decreased with the increasing level of waterborne Cu
and extension of exposure duration.Muscle tissues accounted for over
50%of the total accumulated Cu and played a key role in buffering the
Cu burden in the initial period of exposure, alternatively, the liver
acted a more important role in the storage of Cu with the extension of
exposures. We concluded that assumption of the constant biokinetic
rates could lead to incorrect predictions with overestimating the
long-term Cu accumulation in ecotoxicological risk assessments.
Abstract: In the present work, behavior of inoxydable steel as
reinforcement bar in composite concrete is being investigated. The
bar-concrete adherence in reinforced concrete (RC) beam is studied
and focus is made on the tension stiffening parameter. This study
highlighted an approach to observe this interaction behavior in
bending test instead of direct tension as per reported in many
references. The approach resembles actual loading condition of the
structural RC beam. The tension stiffening properties are then
applied to numerical finite element analysis (FEA) to verify their
correlation with laboratory results. Comparison with laboratory
shows a good correlation between the two. The experimental settings
is able to determine tension stiffening parameters in RC beam and
the modeling strategies made in ABAQUS can closely represent the
actual condition. Tension stiffening model used can represent the
interaction properties between inoxydable steel and concrete.
Abstract: In this paper, a decision aid method for preoptimization
is presented. The method is called “negotiation", and it
is based on the identification, formulation, modeling and use of
indicators defined as “negotiation indicators". These negotiation
indicators are used to explore the solution space by means of a classbased
approach. The classes are subdomains for the negotiation
indicators domain. They represent equivalent cognitive solutions in
terms of the negotiation indictors being used. By this method, we
reduced the size of the solution space and the criteria, thus aiding the
optimization methods. We present an example to show the method.
Abstract: As a part of the development of a numerical method of
close capture exhausts systems for machining devices, a test rig
recreating a situation similar to a grinding operation, but in a
perfectly controlled environment, is used. The properties of the
obtained spray of solid particles are initially characterized using
particle tracking velocimetry (PTV), in order to obtain input and
validation parameters for numerical simulations. The dispersion of a
tracer gas (SF6) emitted simultaneously with the particle jet is then
studied experimentally, as the dispersion of such a gas is
representative of that of finer particles, whose aerodynamic response
time is negligible. Finally, complete modeling of the test rig is
achieved to allow comparison with experimental results and thus to
progress towards validation of the models used to describe a twophase
flow generated by machining operation.
Abstract: This paper is described one of the intelligent control method in Autonomous systems, which is called fuzzy control to correct the three wheel omnidirectional robot movement while it make mistake to catch the target. Fuzzy logic is especially advantageous for problems that can not be easily represented by mathematical modeling because data is either unavailable, incomplete or the process is too complex. Such systems can be easily up grated by adding new rules to improve performance or add new features. In many cases , fuzzy control can be used to improve existing traditional controller systems by adding an extra layer of intelligence to the current control method. The fuzzy controller designed here is more accurate and flexible than the traditional controllers. The project is done at MRL middle size soccer robot team.
Abstract: This paper presents a model for the evaluation of
energy performance and aerodynamic forces acting on a small
straight-bladed Darrieus-type vertical axis wind turbine depending on
blade geometrical section. It consists of an analytical code coupled to
a solid modeling software, capable of generating the desired blade
geometry based on the desired blade design geometric parameters.
Such module is then linked to a finite volume commercial CFD code
for the calculation of rotor performance by integration of the
aerodynamic forces along the perimeter of each blade for a full period
of revolution.After describing and validating the computational
model with experimental data, the results of numerical simulations
are proposed on the bases of two candidate airfoil sections, that is a
classical symmetrical NACA 0021 blade profile and the recently
developed DU 06-W-200 non-symmetric and laminar blade
profile.Through a full CFD campaign of analysis, the effects of blade
geometrical section on angle of attack are first investigated and then
the overall rotor torque and power are analyzed as a function of blade
azimuthal position, achieving a numerical quantification of the
influence of airfoil geometry on overall rotor performance.
Abstract: The performance of a sucrose-based H2 production in
a completely stirred tank reactor (CSTR) was modeled by neural
network back-propagation (BP) algorithm. The H2 production was
monitored over a period of 450 days at 35±1 ºC. The proposed model
predicts H2 production rates based on hydraulic retention time
(HRT), recycle ratio, sucrose concentration and degradation, biomass
concentrations, pH, alkalinity, oxidation-reduction potential (ORP),
acids and alcohols concentrations. Artificial neural networks (ANNs)
have an ability to capture non-linear information very efficiently. In
this study, a predictive controller was proposed for management and
operation of large scale H2-fermenting systems. The relevant control
strategies can be activated by this method. BP based ANNs modeling
results was very successful and an excellent match was obtained
between the measured and the predicted rates. The efficient H2
production and system control can be provided by predictive control
method combined with the robust BP based ANN modeling tool.
Abstract: This paper aims to develop a model that assists the
international retailer in selecting the country that maximizes the
degree of fit between the retailer-s goals and the country
characteristics in his initial internationalization move. A two-stage
multi criteria decision model is designed integrating the Analytic
Hierarchy Process (AHP) and Goal Programming. Ethical, cultural,
geographic and economic proximity are identified as the relevant
constructs of the internationalization decision. The constructs are
further structured into sub-factors within analytic hierarchy. The
model helps the retailer to integrate, rank and weigh a number of
hard and soft factors and prioritize the countries accordingly. The
model has been implemented on a Turkish luxury goods retailer who
was planning to internationalize. Actual entry of the specific retailer
in the selected country is a support for the model. Implementation on
a single retailer limits the generalizability of the results; however, the
emphasis of the paper is on construct identification and model
development. The paper enriches the existing literature by proposing
a hybrid multi objective decision model which introduces new soft
dimensions i.e. perceived distance, ethical proximity, humane
orientation to the decision process and facilitates effective decision
making.
Abstract: In recent past, the Unified Modeling Language (UML) has become the de facto industry standard for object-oriented modeling of the software systems. The syntax and semantics rich UML has encouraged industry to develop several supporting tools including those capable of generating deployable product (code) from the UML models. As a consequence, ensuring the correctness of the model/design has become challenging and extremely important task. In this paper, we present an approach for automatic verification of protocol model/design. As a case study, Session Initiation Protocol (SIP) design is verified for the property, “the CALLER will not converse with the CALLEE before the connection is established between them ". The SIP is modeled using UML statechart diagrams and the desired properties are expressed in temporal logic. Our prototype verifier “UML-SMV" is used to carry out the verification. We subjected an erroneous SIP model to the UML-SMV, the verifier could successfully detect the error (in 76.26ms) and generate the error trace.
Abstract: Understanding of how and where NOx formation
occurs in industrial burner is very important for efficient and clean
operation of utility burners. Also the importance of this problem is
mainly due to its relation to the pollutants produced by more burners
used widely of gas turbine in thermal power plants and glass and steel
industry.
In this article, a numerical model of an industrial burner operating
in MILD combustion is validated with experimental data.. Then
influence of air flow rate and air temperature on combustor
temperature profiles and NOX product are investigated. In order to
modification this study reports on the effects of fuel and air dilution
(with inert gases H2O, CO2, N2), and also influence of lean-premixed
of fuel, on the temperature profiles and NOX emission.
Conservation equations of mass, momentum and energy, and
transport equations of species concentrations, turbulence, combustion
and radiation modeling in addition to NO modeling equations were
solved together to present temperature and NO distribution inside the
burner.
The results shows that dilution, cause to a reduction in value of
temperature and NOX emission, and suppresses any flame
propagation inside the furnace and made the flame inside the furnace
invisible. Dilution with H2O rather than N2 and CO2 decreases further
the value of the NOX. Also with raise of lean-premix level, local
temperature of burner and the value of NOX product are decreases
because of premixing prevents local “hot spots" within the combustor
volume that can lead to significant NOx formation. Also leanpremixing
of fuel with air cause to amount of air in reaction zone is
reach more than amount that supplied as is actually needed to burn
the fuel and this act lead to limiting NOx formation
Abstract: Every 2-3 years the influenza B virus serves
epidemics. Neuraminidase (NA) is an important target for influenza
drug design. Although, oseltamivir, an oral neuraminidase drug, has
been shown good inhibitory efficiency against wild-type of influenza
B virus, the lower susceptibility to the R152K mutation has been
reported. Better understanding of oseltamivir efficiency and
resistance toward the influenza B NA wild-type and R152K mutant,
respectively, could be useful for rational drug design. Here, two
complex systems of wild-type and R152K NAs with oseltamivir
bound were studied using molecular dynamics (MD) simulations.
Based on 5-ns MD simulation, the loss of notable hydrogen bond and
decrease in per-residue decomposition energy from the mutated
residue K152 contributed to drug compared to those of R152 in wildtype
were found to be a primary source of high-level of oseltamivir
resistance due to the R152K mutation.
Abstract: With the advent of DSL services, high data rates are now available over phone lines, yet higher rates are in demand. In this paper, we optimize the transmit filters that can be used over wireline channels. Results showing the bit error rates when optimized filters are used, and with a decision feedback equalizer (DFE) employed in the receiver, are given. We then show that significantly higher throughput can be achieved by modeling the channel as a multiple input multiple output (MIMO) channel. A receiver that employs a MIMO-DFE that deals jointly with several users is proposed and shown to provide significant improvement over the conventional DFE.
Abstract: Human middle-ear is the key component of the
auditory system. Its function is to transfer the sound waves through
the ear canal to provide sufficient stimulus to the fluids of the inner
ear. Degradation of the ossicles that transmit these sound waves from
the eardrum to the inner ear leads to hearing loss. This problem can
be overcome by replacing one or more of these ossicles by middleear
prosthesis. Designing such prosthesis requires a comprehensive
knowledge of the biomechanics of the middle-ear. There are many
finite element modeling approaches developed to understand the
biomechanics of the middle ear. The available models in the
literature, involve high computation time. In this paper, we propose a
simplified model which provides a reasonably accurate result with
much less computational time. Simulation results indicate a
maximum sound pressure gain of 10 dB at 5500 Hz.
Abstract: This work aims to test the application of computational fluid dynamics (CFD) modeling to fixed bed catalytic cracking reactors. Studies of CFD with a fixed bed design commonly use a regular packing with N=2 to define bed geometry. CFD allows us to obtain a more accurate view of the fluid flow and heat transfer mechanisms present in fixed bed equipment. Naphtha was used as feedstock and the reactor length was 80cm. It is divided in three sections that catalyst bed packed in the middle section of the reactor. The reaction scheme was involved one primary reaction and 24 secondary reactions. Because of high CPU times in these simulations, parallel processing have been used. In this study the coke formation process in fixed bed and empty tube reactor was simulated and coke in these reactors are compared. In addition, the effect of steam ratio and feed flow rate on coke formation was investigated.
Abstract: Surface roughness (Ra) is one of the most important requirements in machining process. In order to obtain better surface roughness, the proper setting of cutting parameters is crucial before the process take place. This research presents the development of mathematical model for surface roughness prediction before milling process in order to evaluate the fitness of machining parameters; spindle speed, feed rate and depth of cut. 84 samples were run in this study by using FANUC CNC Milling α-Τ14ιE. Those samples were randomly divided into two data sets- the training sets (m=60) and testing sets(m=24). ANOVA analysis showed that at least one of the population regression coefficients was not zero. Multiple Regression Method was used to determine the correlation between a criterion variable and a combination of predictor variables. It was established that the surface roughness is most influenced by the feed rate. By using Multiple Regression Method equation, the average percentage deviation of the testing set was 9.8% and 9.7% for training data set. This showed that the statistical model could predict the surface roughness with about 90.2% accuracy of the testing data set and 90.3% accuracy of the training data set.
Abstract: Time series forecasting is an important and widely
popular topic in the research of system modeling. This paper
describes how to use the hybrid PSO-RLSE neuro-fuzzy learning
approach to the problem of time series forecasting. The PSO
algorithm is used to update the premise parameters of the
proposed prediction system, and the RLSE is used to update the
consequence parameters. Thanks to the hybrid learning (HL)
approach for the neuro-fuzzy system, the prediction performance
is excellent and the speed of learning convergence is much faster
than other compared approaches. In the experiments, we use the
well-known Mackey-Glass chaos time series. According to the
experimental results, the prediction performance and accuracy in
time series forecasting by the proposed approach is much better
than other compared approaches, as shown in Table IV. Excellent
prediction performance by the proposed approach has been
observed.
Abstract: Increasing demand on the performance of Subsea
Production Systems (SPS) suggests a need for more detailed
investigation of fluid behavior taking place in subsea equipment.
Complete CFD cool down analyses of subsea equipment are very
time demanding. The objective of this paper is to investigate a
Locked CFD approach, which enables significant reduction of the
computational time and at the same time maintains sufficient
accuracy during thermal cool down simulations. The result
comparison of a dead leg simulation using the Full CFD and the three
LCFD-methods confirms the validity of the locked flow field
assumption for the selected case. For the tested case the LCFD
simulation speed up by factor of 200 results in the absolute thermal
error of 0.5 °C (3% relative error), speed up by factor of 10 keeps the
LCFD results within 0.1 °C (0.5 % relative error) comparing to the
Full CFD.
Abstract: The commercial finite element program LS-DYNA was employed to evaluate the response and energy absorbing capacity of cylindrical metal tubes that are externally wrapped with composite. The effects of composite wall thickness, loading conditions and fiber ply orientation were examined. The results demonstrate that a wrapped composite can be utilized effectively to enhance the crushing characteristics and energy absorbing capacity of the tubes. Increasing the thickness of the composite increases the mean force and the specific energy absorption under both static and dynamic crushing. The ply pattern affects the energy absorption capacity and the failure mode of the metal tube and the composite material property is also significant in determining energy absorption efficiency.
Abstract: This research was conducted in the Lower Namkam
Irrigation Project situated in the Namkam River Basin in Thailand.
Degradation of groundwater quality in some areas is caused by saline
soil spots beneath ground surface. However, the tail regulated gate
structure on the Namkam River, a lateral stream of the Mekong
River. It is aimed for maintaining water level in the river at +137.5 to
+138.5 m (MSL) and flow to the irrigation canals based on a gravity
system since July 2009. It might leach some saline soil spots from
underground to soil surface if lack of understanding of the
conjunctive surface water and groundwater behaviors. This research
has been conducted by continuously the observing of both shallow
and deep groundwater level and quality from existing observation
wells. The simulation of surface water was carried out using a
hydrologic modeling system (HEC-HMS) to compute the ungauged
side flow catchments as the lateral flows for the river system model
(HEC-RAS). The constant water levels in the upstream of the
operated gate caused a slight rising up of shallow groundwater level
when compared to the water table. However, the groundwater levels
in the confined aquifers remained less impacted than in the shallow
aquifers but groundwater levels in late of wet season in some wells
were higher than the phreatic surface. This causes salinization of the
groundwater at the soil surface and might affect some crops. This
research aims for the balance of water stage in the river and efficient
groundwater utilization in this area.
Abstract: Stochastic models of biological networks are well established in systems biology, where the computational treatment of such models is often focused on the solution of the so-called chemical master equation via stochastic simulation algorithms. In contrast to this, the development of storage-efficient model representations that are directly suitable for computer implementation has received significantly less attention. Instead, a model is usually described in terms of a stochastic process or a "higher-level paradigm" with graphical representation such as e.g. a stochastic Petri net. A serious problem then arises due to the exponential growth of the model-s state space which is in fact a main reason for the popularity of stochastic simulation since simulation suffers less from the state space explosion than non-simulative numerical solution techniques. In this paper we present transition class models for the representation of biological network models, a compact mathematical formalism that circumvents state space explosion. Transition class models can also serve as an interface between different higher level modeling paradigms, stochastic processes and the implementation coded in a programming language. Besides, the compact model representation provides the opportunity to apply non-simulative solution techniques thereby preserving the possible use of stochastic simulation. Illustrative examples of transition class representations are given for an enzyme-catalyzed substrate conversion and a part of the bacteriophage λ lysis/lysogeny pathway.