CFD Flow and Heat Transfer Simulation for Empty and Packed Fixed Bed Reactor in Catalytic Cracking of Naphtha

This work aims to test the application of computational fluid dynamics (CFD) modeling to fixed bed catalytic cracking reactors. Studies of CFD with a fixed bed design commonly use a regular packing with N=2 to define bed geometry. CFD allows us to obtain a more accurate view of the fluid flow and heat transfer mechanisms present in fixed bed equipment. Naphtha was used as feedstock and the reactor length was 80cm. It is divided in three sections that catalyst bed packed in the middle section of the reactor. The reaction scheme was involved one primary reaction and 24 secondary reactions. Because of high CPU times in these simulations, parallel processing have been used. In this study the coke formation process in fixed bed and empty tube reactor was simulated and coke in these reactors are compared. In addition, the effect of steam ratio and feed flow rate on coke formation was investigated.

Authors:

• D. Salari
• A. Niaei
• P. Chitsaz Yazdi
• M. Derakhshani
• S. R. Nabavi

Keywords:

• Coke Formation
• CFD Simulation
• Fixed Bed
• Catalyitic Cracking.

References:

[1] M. Bajus, V.Vesely, P.A. Leclercq and J. Rijks, "Pyrolysis of n- Heptane" Ind. Eng. Chem. Prod. Res. Dev., vol.18, 30-37, 1979.
[2] D. Kunzru, "Catalytic Pyrolysis of Naphtha" Ind. Eng.Chem. Res. vol.
31, 146-155, 1992.
[3] K. Pant and D. Kunzru, "Catalytic Pyrolysis of n-Heptane: Kinetics and
Modeling", Ind. Eng. Chem. Res., vol. 36, 2059-2065., 1997.
[4] B. Smith and J. Ranade, "Computational Fluid Dynamics for Designing
Process Equipment: Expectations, Current Status, and Path Forward"
Ind. Eng. Chem. Res., vol. 42, 1115-1128., 2003.
[5] L.G. Challenges and Opportunities in Fluid Mechanics and Transport
Phenomena. In Perspectives in Chemical Engineering Research and
Education; Colton, C., Ed.; Advances in Chemical Engineering 16;
Academic Press: San Diego, CA,1991; pp 61-79.
[6] C. Eigenberger., A. Stankiewicz and G. Stankiewicz, "Operational and
Structural Nonidealities in Modeling and Design of Multitubular
Catalytic Reactors", Ind. Eng. Chem. Res., 36, 3140-3148., 1997.
[7] Carvalho. G., Delgado J., Lateral J., "Dispersion in Liquid Flow through
Packed Beds" AIChE J., vol., 46, 1089-1095., 2000.
[8] Merkin. D., McGreavy, J. H., "Fluid Flow and Heat Transfer Past Two
Spheres in a Cylindrical Tube." Comput. Fluids, vol., 14, 267-281.,1986.
[9] Boehm, L.,B. "Flow and Heat Transfer around a Linear Array of
Spheres." Number. Heat Transfer, Part a, vol. 26, 237-252., 1994.
[10] Nijemeisland. M., Dixon. A.G., "Comparison of CFD simulations to
experiment for convective heat transfer in a gas-solid fixed bed." Chem.
Eng. J. vol., 82, 231-246., 2001.