Abstract: This paper presents results of measurements campaign
carried out at a carrier frequency of 24GHz with the help of TPLINK
router in indoor line-of-sight (LOS) scenarios. Firstly, the
radio wave propagation strategies are analyzed in some rooms with
router of point to point Ad hoc network. Then floor attenuation is
defined for 3 floors in experimental region. The free space model and
dual slope models are modified by considering the influence of
corridor conditions on each floor. Using these models, indoor signal
attenuation can be estimated in modeling of indoor radio wave
propagation. These results and modified models can also be used in
planning the networks of future personal communications services.
Abstract: In this article, some methods are mentioned for developing the theatrical language by giving information of “theatrical language" since the arising of the language in obsolete terms, and today, and also by examining the problems. Being able to talk meaningfully in the theater stage is a skillful art. Maybe, to be able to convey the idea of the poet, his/her world outlook and his/her feelings from the bottom of the heart as such, also conveying the speech norms without breaking them to the ear of audience in a fascinating way in adverse of a repellent way is the most difficult one. Because of this, “the word is the mirror of the idea". The importance of the theatrical language should not be perceived as only a post, it is “as the yarn that the culture carpet is weaved from". Thereby, it is a tool which transposes our culture and our life style from generation to generation. At the time of creativeness, the “word" comes out from the poet, “the word and feeling" art comes out from the actor. If it was not so, the audience could read the texts of the work himself/herself instead of going to the theater in order to see the performance. The fundamental works by the Turkish, Kazakh and English scientists have been taken as a basis for the research done.
Abstract: This paper presents a subjective job scheduler based
on a 3-layer Backpropagation Neural Network (BPNN) and a greedy
alignment procedure in order formulates a real-life situation. The
BPNN estimates critical values of jobs based on the given subjective
criteria. The scheduler is formulated in such a way that, at each time
period, the most critical job is selected from the job queue and is
transferred into a single machine before the next periodic job arrives.
If the selected job is one of the oldest jobs in the queue and its
deadline is less than that of the arrival time of the current job, then
there is an update of the deadline of the job is assigned in order to
prevent the critical job from its elimination. The proposed
satisfiability criteria indicates that the satisfaction of the scheduler
with respect to performance of the BPNN, validity of the jobs and the
feasibility of the scheduler.
Abstract: Organic farmers across Saskatchewan face soil
phosphorus (P) shortages. Due to the restriction on inputs in organic
systems, farmers rely on crop rotation and naturally-occurring
arbuscular mycorrhizal fungi (AMF) for plant P supply. Crop rotation
is important for disease, pest, and weed management. Crops that are
not colonized by AMF (non-mycorrhizal) can decrease colonization
of a following crop. An experiment was performed to quantify soil P
cycling in four cropping sequences under organic management and
determine if mustard (non-mycorrhizal) was delaying the
colonization of subsequent wheat. Soils from the four cropping
sequences were measured for inorganic soil P (Pi), AMF spore
density (SD), phospholipid fatty acid analysis (PLFA, for AMF
biomarker counts), and alkaline phosphatase activity (ALPase,
related to AMF metabolic activity). Plants were measured for AMF
colonization and P content and uptake of above-ground biomass. A
lack of difference in AMF activity indicated that mustard was not
depressing colonization. Instead, AMF colonization was largely
determined by crop type and crop rotation.
Abstract: In this paper we propose a new content-weighted
method for full reference (FR) video quality control using a region of
interest (ROI) and wherein two-component weighted metrics for Deaf
People Video Communication. In our approach, an image is
partitioned into region of interest and into region "dry-as-dust", then
region of interest is partitioned into two parts: edges and background
(smooth regions), while the another methods (metrics) combined and
weighted three or more parts as edges, edges errors, texture, smooth
regions, blur, block distance etc. as we proposed. Using another idea
that different image regions from deaf people video communication
have different perceptual significance relative to quality. Intensity
edges certainly contain considerable image information and are
perceptually significant.
Abstract: Power System Security is a major concern in real time
operation. Conventional method of security evaluation consists of
performing continuous load flow and transient stability studies by
simulation program. This is highly time consuming and infeasible
for on-line application. Pattern Recognition (PR) is a promising
tool for on-line security evaluation. This paper proposes a Support
Vector Machine (SVM) based binary classification for static and
transient security evaluation. The proposed SVM based PR approach
is implemented on New England 39 Bus and IEEE 57 Bus systems.
The simulation results of SVM classifier is compared with the other
classifier algorithms like Method of Least Squares (MLS), Multi-
Layer Perceptron (MLP) and Linear Discriminant Analysis (LDA)
classifiers.
Abstract: As we know, most differential equations concerning
physical phenomenon could not be solved by analytical method. Even if we use Series Method, some times we need an appropriate change of variable, and even when we can, their closed form solution may be
so complicated that using it to obtain an image or to examine the structure of the system is impossible. For example, if we consider Schrodinger equation, i.e.,
We come to a three-term recursion relations, which work with it takes, at least, a little bit time to get a series solution[6]. For this
reason we use a change of variable such as or when we consider the orbital angular momentum[1], it will be
necessary to solve. As we can observe, working with this equation is tedious. In this paper, after introducing Clenshaw method, which is a kind of Spectral method, we try to solve some of such equations.
Abstract: Concurrency and synchronization are becoming big
issues as every new PC comes with multi-core processors. A major
reason for Object-Oriented Programming originally was to enable
easier reuse: encode your algorithm into a class and thoroughly
debug it, then you can reuse the class again and again. However,
when we get to concurrency and synchronization, this is often not
possible. Thread-safety issues means that synchronization constructs
need to be entangled into every class involved. We contributed a
detailed literature review of issues and challenges in concurrent
programming and present a methodology that uses the Aspect-
Oriented paradigm to address this problem. Aspects will allow us to
extract the synchronization concerns as schemes to be “weaved in"
later into the main code. This allows the aspects to be separately
tested and verified. Hence, the functional components can be weaved
with reusable synchronization schemes that are robust and scalable.
Abstract: This paper presents a multiband CPW-fed slot antenna
with L-slot bowtie tuning stub. The proposed antenna has been
designed for PCS 1900, UMTS, WLAN 802.11 a/b/g and bluetooth
applications, with a cost-effective FR4 substrate. The proposed
antenna still radiate as omni-directional in azimuth plane and
sufficient bandwidth for all above mentions. The proposed antenna
works as dual-wideband, bandwidth at low frequency band and high
frequency are about 45.49 % and 22.39 % respectively. The
experimental results of the constructed prototype are presented and
also compared with simulation results using a commercial software
tool.
Abstract: This paper presents data annotation models at
five levels of granularity (database, relation, column, tuple, and cell) of relational data to address the problem of unsuitability of most relational databases to express annotations. These models
do not require any structural and schematic changes to the
underlying database. These models are also flexible, extensible,
customizable, database-neutral, and platform-independent. This paper also presents an SQL-like query language, named Annotation Query Language (AnQL), to query annotation documents. AnQL is simple to understand and exploits the already-existent wide knowledge and skill set of SQL.
Abstract: According to celebrated Hurwitz theorem, there exists
four division algebras consisting of R (real numbers), C (complex
numbers), H (quaternions) and O (octonions). Keeping in view
the utility of octonion variable we have tried to extend the three
dimensional vector analysis to seven dimensional one. Starting with
the scalar and vector product in seven dimensions, we have redefined
the gradient, divergence and curl in seven dimension. It is shown
that the identity n(n - 1)(n - 3)(n - 7) = 0 is satisfied only
for 0, 1, 3 and 7 dimensional vectors. We have tried to write all
the vector inequalities and formulas in terms of seven dimensions
and it is shown that same formulas loose their meaning in seven
dimensions due to non-associativity of octonions. The vector formulas
are retained only if we put certain restrictions on octonions and split
octonions.
Abstract: Biplot can be used to evaluate cultivars for their oil
percent potential and stability and to evaluate trial sites for their
discriminating ability and representativeness. Multi-environmental
trial (MET) data for oil percent of 10 open pollinating sunflower
cultivars were analyzed to investigate the genotype-environment
interactions. The genotypes were evaluated in four locations with
different climatic conditions in Iran in 2010. In each location, a
Randomized Complete Block design with four replications was used.
According to both mean and stability, Zaria, Master and R453, had
highest performances among all cultivars. The graphical analysis
identified best cultivar for each environment. Cultivars Berezans and
Record performed best in Khoy and Islamabad. Zaria and R453 were
the best genotypes in Sari and Karaj followed by Master and Favorit.
The GGE bi-plot indicated two mega-environments, group one
contained Karaj, Khoy and Islamabad and the second group
contained Sari. The best discriminating location was Karaj followed
with Khoy, Islamabad and Sari. The best representative genotypes
were Zaria, R453, Master and Favorit. Ranking of ten cultivars based
their oil percent was as Zaria > R453 ≈ Master ≈ Favorit > Record ≈
Berezans > Sor > Lakumka > Bulg3 > Bulg5.
Abstract: Stairway Ushtobin Village is one of the five villages with original and sustainable architecture in Northwest of Iran along the border of Armenia, which has been able to maintain its environment and sustainable ecosystem. Studying circulation, function and scale (grand, medium and minor) of space, ratio of full and empty spaces, number and height of stairs, ratio of compound volume to luxury spaces, openings, type of local masonry (stone, mud, wood) and form of covering elements have been carried out in four houses of this village comparatively as some samples in this article, and furthermore, this article analyzes that the architectural shapes and organic texture of the village meet the needs of cold and dry climate. Finally, some efficient plans are offered suiting the present needs of the village to have a sustainable architecture.
Abstract: In this paper, a direct torque control - space vector
modulation (DTC-SVM) scheme is presented for a six-phase speed
and voltage sensorless induction motor (IM) drive. The decoupled
torque and stator flux control is achieved based on IM stator flux field orientation. The rotor speed is detected by on-line estimating of
the rotor angular slip speed and stator vector flux speed. In addition, a simple method is introduced to estimate the stator resistance.
Moreover in this control scheme the voltage sensors are eliminated
and actual motor phase voltages are approximated by using PWM
inverter switching times and the dc link voltage. Finally, some simulation and experimental results are presented to verify the
effectiveness and capability of the proposed control scheme.
Abstract: Utilization of waste material in asphalt pavement
would be beneficial in order to find an alternative solution to increase
service life of asphalt pavement and reduce environmental pollution
as well. One of these waste materials is Polyethylene Terephthalate
(PET) which is a type of polyester material and is produced in a large
extent. This research program is investigating the effects of adding
waste PET particles into the asphalt mixture with a maximum size of
2.36 mm. Different percentages of PET were added into the mixture
during dry process. Gap-graded mixture (SMA 14) and PG 80-100
asphalt binder have been used for this study. To evaluate PET
reinforced asphalt mixture different laboratory investigations have
been conducted on specimens. Marshall Stability test was carried
out. Besides, stiffness modulus test and indirect tensile fatigue test
were conducted on specimens at optimum asphalt content. It was
observed that in many cases PET reinforced SMA mixture had better
mechanical properties in comparison with control mixture.
Abstract: This article explores the self-identity of the Kazakh
people by way of identifying the roots of self-understanding in
Kazakh culture. Unfortunately, Western methods of ethno
psychology cannot fully capture what is unique about identity in
Kazakh culture. Although Kazakhstan is the ninth largest country in
terms of geographical space, Kazakh cultural identity is not wellknown
in the West. In this article we offer an account of the national
psychological features of the Kazakh people, in order to reveal the
spiritual, mental, ethical dimensions of modern Kazakhs. These
factors play a central role in the revival of forms of identity that are
central to the Kazakh people.
Abstract: In this work a visual and reactive contour following
behaviour is learned by reinforcement. With artificial vision the
environment is perceived in 3D, and it is possible to avoid obstacles
that are invisible to other sensors that are more common in mobile
robotics. Reinforcement learning reduces the need for intervention in
behaviour design, and simplifies its adjustment to the environment,
the robot and the task. In order to facilitate its generalisation to other
behaviours and to reduce the role of the designer, we propose a
regular image-based codification of states. Even though this is much
more difficult, our implementation converges and is robust. Results
are presented with a Pioneer 2 AT on a Gazebo 3D simulator.
Abstract: A new hybrid method to realise high-precision
distortion determination for optical ultra-precision 3D measurement
systems based on stereo cameras using active light projection is
introduced. It consists of two phases: the basic distortion
determination and the refinement. The refinement phase of the
procedure uses a plane surface and projected fringe patterns as
calibration tools to determine simultaneously the distortion of both
cameras within an iterative procedure. The new technique may be
performed in the state of the device “ready for measurement" which
avoids errors by a later adjustment. A considerable reduction of
distortion errors is achieved and leads to considerable improvements
of the accuracy of 3D measurements, especially in the precise
measurement of smooth surfaces.
Abstract: The use of 3D computer-aided design (CAD) models
to support construction project planning has been increasing in the
previous year. 3D CAD models reveal more planning ideas by
visually showing the construction site environment in different stages
of the construction process. Using 3D CAD models together with
scheduling software to prepare construction plan can identify errors
in process sequence and spatial arrangement, which is vital to the
success of a construction project. A number of 4D (3D plus time)
CAD tools has been developed and utilized in different construction
projects due to the awareness of their importance. Virtual prototyping
extends the idea of 4D CAD by integrating more features for
simulating real construction process. Virtual prototyping originates
from the manufacturing industry where production of products such
as cars and airplanes are virtually simulated in computer before they
are built in the factory. Virtual prototyping integrates 3D CAD,
simulation engine, analysis tools (like structural analysis and
collision detection), and knowledgebase to streamline the whole
product design and production process. In this paper, we present the
application of a virtual prototyping software which has been used in
a few construction projects in Hong Kong to support construction
project planning. Specifically, the paper presents an implementation
of virtual prototyping in a residential building project in Hong Kong.
The applicability, difficulties and benefits of construction virtual
prototyping are examined based on this project.
Abstract: Since the presentation of the backpropagation algorithm, a vast variety of improvements of the technique for training a feed forward neural networks have been proposed. This article focuses on two classes of acceleration techniques, one is known as Local Adaptive Techniques that are based on weightspecific only, such as the temporal behavior of the partial derivative of the current weight. The other, known as Dynamic Adaptation Methods, which dynamically adapts the momentum factors, α, and learning rate, η, with respect to the iteration number or gradient. Some of most popular learning algorithms are described. These techniques have been implemented and tested on several problems and measured in terms of gradient and error function evaluation, and percentage of success. Numerical evidence shows that these techniques improve the convergence of the Backpropagation algorithm.