Abstract: In order to develop any strategy, it is essential to first
identify opportunities, threats, weak and strong points. Assessment of
technology level provides the possibility of concentrating on weak
and strong points. The results of technology assessment have a direct
effect on decision making process in the field of technology transfer
or expansion of internal research capabilities so it has a critical role
in technology management. This paper presents a conceptual model
to analyze the technology capability of a company as a whole and in
four main aspects of technology. This model was tested on 10
automotive parts manufacturers in IRAN. Using this model,
capability level of manufacturers was investigated in four fields of
managing aspects, hard aspects, human aspects, and information and
knowledge aspects. Results show that these firms concentrate on hard
aspect of technology while others aspects are poor and need to be
supported more. So this industry should develop other aspects of
technology as well as hard aspect to have effective and efficient use
of its technology. These paper findings are useful for the technology
planning and management in automotive part manufactures in IRAN
and other Industries which are technology followers and transport
their needed technologies.
Abstract: In vitro gastro-duodenal digestion model was used to investigate the changes of emulsions under digestion conditions. Oil in water emulsions stabilized by whey proteins (2%) and stabilized by whey proteins (2%) with addition of carboxymethyl cellulose (0.75%) as gelling agent of continuous phase were prepared at pH7. Both emulsions were destabilized under gastric conditions; however the protective role of carboxymethyl cellulose was indicated by recording delay of fat digestibility of this emulsion. In the presence of carboxymethyl cellulose whey proteins on the interfacial surface of droplets were more resistant to gastric degradation causing limited hydrolysis of fat due to the poor acceptability of lipids for the enzymes. Studies of emulsions using in vivo model supported results from in vitro studies. Lower content of triglycerides in blood serum and higher amount of fecal fat of rats were determined when rats were fed by diet containing emulsion made with whey proteins and carboxymethyl cellulose.
Abstract: The present study examines the mediating effect of
online flow experience on the relationship between extraversionintroversion,
locus of control and loneliness, and depression and
satisfaction with life. The data was obtained using a structured
questionnaire prepared by adapting standardized scales available from
a sample of 102 engineering students from different technical
institutions at Bhubaneswar, India. The results indicate that there is a
positive significant relationship between introversion, external locus
of control, loneliness, depression and online flow experience, and
extraversion, internal locus of control and satisfaction with life. The
results also suggest that online flow experience mediates the
relationship between the aforementioned variables.
Abstract: Optimal design of structure has a main role in reduction of material usage which leads to deduction in the final cost of construction projects. Evolutionary approaches are found to be more successful techniques for solving size and shape structural optimization problem since it uses a stochastic random search instead of a gradient search. By reviewing the recent literature works the problem found was the optimization of weight. A new meta-heuristic algorithm called as Cuckoo Search (CS) Algorithm has used for the optimization of the total weight of the truss structures. This paper has used set of 10 bars and 25 bars trusses for the testing purpose. The main objective of this work is to reduce the number of iterations, weight and the total time consumption. In order to demonstrate the effectiveness of the present method, minimum weight design of truss structures is performed and the results of the CS are compared with other algorithms.
Abstract: Service innovations are central concerns in fast
changing environment. Due to the fitness in customer demands and
advances in information technologies (IT) in service management, an
expanded conceptualization of e-service innovation is required.
Specially, innovation practices have become increasingly more
challenging, driving managers to employ a different open innovation
model to maintain competitive advantages. At the same time, firms
need to interact with external and internal customers in innovative
environments, like the open innovation networks, to co-create values.
Based on these issues, an important conceptual framework of e-service
innovation is developed. This paper aims to examine the contributing
factors on e-service innovation and firm performance, including
financial and non-financial aspects. The study concludes by showing
how e-service innovation will play a significant role in growing the
overall values of the firm. The discussion and conclusion will lead to a
stronger understanding of e-service innovation and co-creating values
with customers within open innovation networks.
Abstract: An investigation of noise in a micro stepping motor is
considered to study in this article. Because of the trend towards higher
precision and more and more small 3C (including Computer,
Communication and Consumer Electronics) products, the micro
stepping motor is frequently used to drive the micro system or the
other 3C products. Unfortunately, noise in a micro stepped motor is
too large to accept by the customs. To depress the noise of a micro
stepped motor, the dynamic characteristics in this system must be
studied. In this article, a Visual Basic (VB) computer program speed
controlled micro stepped motor in a digital camera is investigated.
Karman KD2300-2S non-contract eddy current displacement sensor,
probe microphone, and HP 35670A analyzer are employed to analyze
the dynamic characteristics of vibration and noise in a motor. The
vibration and noise measurement of different type of bearings and
different treatment of coils are compared. The rotating components,
bearings, coil, etc. of the motor play the important roles in producing
vibration and noise. It is found that the noise will be depressed about
3~4 dB and 6~7 dB, when substitutes the copper bearing with plastic
one and coats the motor coil with paraffin wax, respectively.
Abstract: This paper presents a solution for the behavioural animation of autonomous virtual agent navigation in virtual environments. We focus on using Dempster-Shafer-s Theory of Evidence in developing visual sensor for virtual agent. The role of the visual sensor is to capture the information about the virtual environment or identifie which part of an obstacle can be seen from the position of the virtual agent. This information is require for vitual agent to coordinate navigation in virtual environment. The virual agent uses fuzzy controller as a navigation system and Fuzzy α - level for the action selection method. The result clearly demonstrates the path produced is reasonably smooth even though there is some sharp turn and also still not diverted too far from the potential shortest path. This had indicated the benefit of our method, where more reliable and accurate paths produced during navigation task.
Abstract: Quantitative Investigation of impact of the factors' contribution towards measuring the reusability of software components could be helpful in evaluating the quality of developed or developing reusable software components and in identification of reusable component from existing legacy systems; that can save cost of developing the software from scratch. But the issue of the relative significance of contributing factors has remained relatively unexplored. In this paper, we have use the Taguchi's approach in analyzing the significance of different structural attributes or factors in deciding the reusability level of a particular component. The results obtained shows that the complexity is the most important factor in deciding the better Reusability of a function oriented Software. In case of Object Oriented Software, Coupling and Complexity collectively play significant role in high reusability.
Abstract: Rainfall data at fine resolution and knowledge of its
characteristics plays a major role in the efficient design and operation
of agricultural, telecommunication, runoff and erosion control as well
as water quality control systems. The paper is aimed to study the
statistical distribution of hourly rainfall depth for 12 representative
stations spread across Peninsular Malaysia. Hourly rainfall data of 10
to 22 years period were collected and its statistical characteristics
were estimated. Three probability distributions namely, Generalized
Pareto, Exponential and Gamma distributions were proposed to
model the hourly rainfall depth, and three goodness-of-fit tests,
namely, Kolmogorov-Sminov, Anderson-Darling and Chi-Squared
tests were used to evaluate their fitness. Result indicates that the east
cost of the Peninsular receives higher depth of rainfall as compared
to west coast. However, the rainfall frequency is found to be
irregular. Also result from the goodness-of-fit tests show that all the
three models fit the rainfall data at 1% level of significance.
However, Generalized Pareto fits better than Exponential and
Gamma distributions and is therefore recommended as the best fit.
Abstract: Managers as the key employees have a very important
role in maintaining the workforce performance which is critical to the
construction companies- success in the future. If motivated
employees start with motivated managers probably it would seem
plausible if the de-motivated ones start with de-motivated managers.
This study aims to analyze the importance of motivated managers to
their successes and construction companies- successes. In this study,
a quantitative method was used and the study area was in Medan,
North Sumatera. Questionnaire survey was distributed directly to
construction companies in Medan which are listed in the
Construction Services Development Board. A total of 60 managers
responded and the completed questionnaires were analyzed using the
descriptive analysis. The results indicated that the respondents
acknowledge the importance of motivation among themselves to the
projects and construction companies- success, implying that it is vital
to maintain the motivation and good performance of the workforce.
Abstract: In Both developed and developing countries,
governments play a basic role in making policies, programs and
instruments which support the development of micro, small and
medium enterprises. One of the mechanisms employed to nurture
small firms for more than two decades is business incubation. One of
the mechanisms employed to nurture small firms for more than two
decades is technology business incubation. The main aim of this
research was to establish influencing factors in Technology Business
Incubator's effectiveness and their explanatory model. Therefore,
among 56 Technology Business Incubators in Iran, 32 active
incubators were selected and by stratified random sampling, 528
start-ups were chosen. The validity of research questionnaires
was determines by expert consensus, item analysis and factor
analysis; and their reliability calculated by Cronbach-s alpha.
Data analysis was then made through SPSS and LISREL soft wares.
Both organizational procedures and entrepreneurial behaviors were
the meaningful mediators. Organizational procedures with (P < .01, β
=0.45) was stronger mediator for the improvement of Technology
Business Incubator's effectiveness comparing to entrepreneurial
behavior with (P < .01, β =0.36).
Abstract: Increasing use of cell phone as a medium of human interaction is playing a vital role in solving riddles of crime as well. A young girl went missing from her home late in the evening in the month of August, 2008 when her enraged relatives and villagers physically assaulted and chased her fiancée who often frequented her home. Two years later, her mother lodged a complaint against the relatives and the villagers alleging that after abduction her daughter was either sold or killed as she had failed to trace her. On investigation, a rusted cell phone with partial visible IMEI number, clothes, bangles, human skeleton etc. recovered from abandoned well in the month of May, 2011 were examined in the lab. All hopes pinned on identity of cell phone, for only linking evidence to fix the scene of occurrence supported by call detail record (CDR) and to dispel doubts about mode of sudden disappearance or death as DNA technology did not help in establishing identity of the deceased. The conventional scientific methods were used without success and international mobile equipment identification number of the cell phone could be generated by using statistical analysis followed by online verification.
Abstract: Social cognitive theory explains the power to inaugurate change is determined by the mutual influence of personal proclivity and social factors which will shape ones- motivations and expectations. In construction industry, green concept offers an opportunity to leave a lighter footprint on the environment. This opportunity, however, has not been fully grasped by many countries. As such, venturing into green construction for many practitioners would be their maiden experience. Decision to venture into new practice such as green construction will be influenced by certain drivers. This paper explores these drivers which is further expanded into motivational factors and later becomes the platform upon which expectation for green construction stands. This theoretical concept of motivation and expectations, which is adapted from social cognitive theory, focus on developers- view because of their crucial role in green application. This conceptual framework, which serves as the basis for further research, will benefit the industry as it elucidate cognitive angles to attract more new entrants to green business.
Abstract: Titanium oxide films with different morphologies have for the first time been fabricated through hydrothermal reactions between a titanium substrate and iodine powder in water or ethanol. SEM revealed that iodine supported titanium (Ti-I2) surface shows different morphologies with variable treatment conditions. The mean surface roughness (Ra) was increased in the different groups. Use of surfactant has a role to increase the roughness of the film. The surface roughness was in the range of 0.15 μm-0.42 μm. Furthermore, the electrochemical examinations showed that the Ti-I2 surface fabricated in alcoholic medium has high corrosion resistance than in aqueous medium.
Abstract: With the rapid growth and development of information and communication technology, the Internet has played a definite and irreplaceable role in people-s social lives in Taiwan like in other countries. In July 2008, on a general social website, an unexpected phenomenon was noticed – that there were more than one hundred users who started forming clubs voluntarily and having face-to-face gatherings for specific purposes. In this study, it-s argued whether or not teenagers- social contact on the Internet is involved in their life context, and tried to reveal the teenagers- social preferences, values, and needs, which merge with and influence teenagers- social activities. Therefore, the study conducts multiple user experience research methods, which include practical observations and qualitative analysis by contextual inquiries and in-depth interviews. Based on the findings, several design implications for software related to social interactions and cultural inheritance are offered. It is concluded that the inherent values of a social behaviors might be a key issue in developing computer-mediated communication or interaction designs in the future.
Abstract: Pipeline infrastructures normally represent high cost of investment and the pipeline must be free from risks that could cause environmental hazard and potential threats to personnel safety. Pipeline integrity such monitoring and management become very crucial to provide unimpeded transportation and avoiding unnecessary production deferment. Thus proper cleaning and inspection is the key to safe and reliable pipeline operation and plays an important role in pipeline integrity management program and has become a standard industry procedure. In view of this, understanding the motion (dynamic behavior), prediction and control of the PIG speed is important in executing pigging operation as it offers significant benefits, such as estimating PIG arrival time at receiving station, planning for suitable pigging operation, and improves efficiency of pigging tasks. The objective of this paper is to review recent developments in speed control system of pipeline PIGs. The review carried out would serve as an industrial application in a form of quick reference of recent developments in pipeline PIG speed control system, and further initiate others to add-in/update the list in the future leading to knowledge based data, and would attract active interest of others to share their view points.
Abstract: This research tries to analyze the role that knowledge
about foreign markets has in increasing firms- exports in clustered
spaces. We consider two interrelated sources of knowledge: firms-
direct experience and indirect experience from other clustered firms –
export externalities. In particular, it is proposed that firms would
improve their export performance by accessing to export externalities
if they have some previous direct experience that allows them to
identify, understand and exploit them. Also, we propose that this
positive influence of previous direct experience on export
externalities keeps only up to a point, where it becomes negative,
creating an inverted “U" shape. Empirical evidence gathered among
wine producers located in La Rioja tends to confirm that firms enjoy
of export externalities if they have export experience along several
years and countries increase their export performance. While this
relationship becomes less relevant as they develop a higher
experience, we could not confirm the existence of a curvilinear
relationship in their influence on export externalities and export
performance.
Abstract: Computer modeling has played a unique role in
understanding electrocardiography. Modeling and simulating cardiac
action potential propagation is suitable for studying normal and
pathological cardiac activation. This paper presents a 2-D Cellular
Automata model for simulating action potential propagation in
cardiac tissue. We demonstrate a novel algorithm in order to use
minimum neighbors. This algorithm uses the summation of the
excitability attributes of excited neighboring cells. We try to
eliminate flat edges in the result patterns by inserting probability to
the model. We also preserve the real shape of action potential by
using linear curve fitting of one well known electrophysiological
model.
Abstract: The communication networks development and
advancement during two last decades has been toward a single goal
and that is gradual change from circuit-switched networks to packed
switched ones. Today a lot of networks operates are trying to
transform the public telephone networks to multipurpose packed
switch. This new achievement is generally called "next generation
networks". In fact, the next generation networks enable the operators
to transfer every kind of services (sound, data and video) on a
network. First, in this report the definition, characteristics and next
generation networks services and then ad-hoc networks role in the
next generation networks are studied.
Abstract: This study applied the Gaussian trajectory
transfer-coefficient model (GTx) to simulate the particulate matter
concentrations and the source apportionments at Nanzih Air Quality
Monitoring Station in southern Taiwan from November 2007 to
February 2008. The correlation coefficient between the observed and
the calculated daily PM10 concentrations is 0.5 and the absolute bias of
the PM10 concentrations is 24%. The simulated PM10 concentrations
matched well with the observed data. Although the emission rate of
PM10 was dominated by area sources (58%), the results of source
apportionments indicated that the primary sources for PM10 at Nanzih
Station were point sources (42%), area sources (20%) and then upwind
boundary concentration (14%). The obvious difference of PM10 source
apportionment between episode and non-episode days was upwind
boundary concentrations which contributed to 20% and 11% PM10
sources, respectively. The gas-particle conversion of secondary
aerosol and long range transport played crucial roles on the PM10
contribution to a receptor.