Abstract: An attempt in this paper proposes a re-modification to
the minimum moment approach of resource leveling which is a modified minimum moment approach to the traditional method by
Harris. The method is based on critical path method. The new approach suggests the difference between the methods in the
selection criteria of activity which needs to be shifted for leveling resource histogram. In traditional method, the improvement factor
found first to select the activity for each possible day of shifting. In
modified method maximum value of the product of Resources Rate
and Free Float was found first and improvement factor is then
calculated for that activity which needs to be shifted. In the proposed
method the activity to be selected first for shifting is based on the largest value of resource rate. The process is repeated for all the
remaining activities for possible shifting to get updated histogram.
The proposed method significantly reduces the number of iterations
and is easier for manual computations.
Abstract: Ireland developed a National Strategy 2030 that
argued for the creation of a new form of higher education institution,
a Technological University. The research reported here reviews the
first stage of this partnership development. The study found that
national policy can create system capacity and change, but that
individual partners may have more to gain or lose in collaborating.
When presented as a zero-sum activity, fear among partners is high.
The level of knowledge and networking within the higher education
system possessed by each partner contributed to decisions to
participate or not in a joint proposal for collaboration. Greater
success resulted when there were gains for all partners. This research
concludes that policy mandates can provide motivation to
collaborate, but that the partnership needs to be built more on shared
values versus coercion by mandates.
Abstract: Wind energy has been shown to be one of the most
viable sources of renewable energy. With current technology, the low
cost of wind energy is competitive with more conventional sources of
energy such as coal. Most blades available for commercial grade
wind turbines incorporate a straight span-wise profile and airfoil
shaped cross sections. These blades are found to be very efficient at
lower wind speeds in comparison to the potential energy that can be
extracted. However as the oncoming wind speed increases the
efficiency of the blades decreases as they approach a stall point. This
paper explores the possibility of increasing the efficiency of the
blades at higher wind speeds while maintaining efficiency at the
lower wind speeds. The design intends to maintain efficiency at
lower wind speeds by selecting the appropriate orientation and size
of the airfoil cross sections based on a low oncoming wind speed and
given constant rotation rate. The blades will be made more efficient
at higher wind speeds by implementing a swept blade profile.
Performance was investigated using the computational fluid
dynamics (CFD).
Abstract: The introduction of sowing technologies into minimum- or no-tillage soil has a number of economical and environmental virtues, such as improving soil properties, decreasing soil erosion and degradation, and saving working time and fuel. However, the main disadvantage of these technologies is that plant residues on the soil surface reduce the quality of the planted crop seeds, thus requiring plant residues to be removed or cut. This paper presents a analysis of disc coulter parameters and an experimental investigation of cutting spring barley straw containing various amounts of moisture with different disc coulters (smooth and notched).
Abstract: Electro Chemical Discharge Machining (ECDM) is an
emerging hybrid machining process used in precision machining of hard and brittle non-conducting materials. The present paper gives a
critical review on materials machined by ECDM under the prevailing machining conditions; capability indicators of the process are
reported. Some results obtained while performing experiments in micro-channeling on soda lime glass using ECDM are also presented. In these experiments, Tool Wear (TW) and Material Removal (MR)
were studied using design of experiments and L–4 orthogonal array. Experimental results showed that the applied voltage was the most influencing parameter in both MR and TW studies. Field
emission scanning electron microscopy (FESEM) results obtained on the microchannels confirmed the presence of micro-cracks, primarily responsible for MR. Chemical etching was also seen along the edges.
The Energy dispersive spectroscopy (EDS) results were used to detect the elements present in the debris and specimens.
Abstract: Cloud Computing is a new technology that helps us to
use the Cloud for compliance our computation needs. Cloud refers to a scalable network of computers that work together like Internet. An
important element in Cloud Computing is that we shift processing, managing, storing and implementing our data from, locality into the
Cloud; So it helps us to improve the efficiency. Because of it is new
technology, it has both advantages and disadvantages that are
scrutinized in this article. Then some vanguards of this technology
are studied. Afterwards we find out that Cloud Computing will have
important roles in our tomorrow life!
Abstract: The use of radar in Quantitative Precipitation Estimation (QPE) for radar-rainfall measurement is significantly beneficial. Radar has advantages in terms of high spatial and temporal condition in rainfall measurement and also forecasting. In Malaysia, radar application in QPE is still new and needs to be explored. This paper focuses on the Z/R derivation works of radarrainfall estimation based on rainfall classification. The works developed new Z/R relationships for Klang River Basin in Selangor area for three different general classes of rain events, namely low (10mm/hr, 30mm/hr) and also on more specific rain types during monsoon seasons. Looking at the high potential of Doppler radar in QPE, the newly formulated Z/R equations will be useful in improving the measurement of rainfall for any hydrological application, especially for flood forecasting.
Abstract: Pattern recognition and image recognition methods are commonly developed and tested using testbeds, which contain known responses to a query set. Until now, testbeds available for image analysis and content-based image retrieval (CBIR) have been scarce and small-scale. Here we present the one million images CEA-List Image Collection (CLIC) testbed that we have produced, and report on our use of this testbed to evaluate image analysis merging techniques. This testbed will soon be made publicly available through the EU MUSCLE Network of Excellence.
Abstract: Aluminothermic rail welding was from the beginning
a great success because its low price even in 1895 in Germany. This
method is now, widely used all over the world for the railways
construction, maintenance and modernization. Instructions give you
guidelines for preparing papers for conferences or journals.
After 1989, the welding needs of the potentials beneficiaries
(Romanian Railways, Urban Transportation Companies) keep raise
because of the railways maintenance and modernization necessity.
The main materials that determine the Thermit (T) composition
result from manufacturing scraps all over the country. This can help
the environment by consuming these scraps.
The Romanian need for alumino-thermic welding is now by 11300
per year, and in a favourable economical environment, this amount
can reach 30000 units.
This paper tries to show the effect of two types of modifiers
introduced in the T composition on the structure and properties of an
alumino-thermic welding.
Abstract: The paper discusses European Lifelong Learning policy in the European enlargement to the Balkan. The European Lifelong Learning policy with Human Capital approach is researched in the country case of Macedonia. The paper argues that Human Capital approach focusing on instrumental and economic importance of learning for employability and economic growth needs to be complemented with Capability Approach for intrinsic and noneconomic needs of learning among the ethnic minorities. The paper identifies two dimensions of importance – minority languages and civic education – that the Capability Approach may develop to guarantee equal opportunities to all to benefit from European educational and lifelong learning development and to build an inclusive and socially just democracy in Macedonia.
Abstract: Iranians- imagination of heaven, which is the reward
of a person-s good deeds during their life, has shown itself in
pleasant and green gardens where earthly gardens were made as
representations of paradise. Iranians are also quite interested in
making their earthly gardens and plantations around their buildings.
With Iran-s hot and dry climate with a lack of sufficient water for
plantation coverage, it becomes noticeable how important it is to
Iranians- art in making gardens. This study, with regard to examples,
documents and library studies, investigates the characteristics of
Persian gardens. The result shows that elements such as soil, water,
plants and layout have been used in forming a unique style of Persian
gardens. Bagh-e Shah Zadeh Mahan (Mahan prince garden) is a
typical example and has been carefully studied. In this paper I try to
investigate and evaluate the characteristics of a Persian garden by
means of a descriptive approach.
Abstract: This study proposes a novel recommender system to
provide the advertisements of context-aware services. Our proposed
model is designed to apply a modified collaborative filtering (CF)
algorithm with regard to the several dimensions for the personalization
of mobile devices – location, time and the user-s needs type. In
particular, we employ a classification rule to understand user-s needs
type using a decision tree algorithm. In addition, we collect primary
data from the mobile phone users and apply them to the proposed
model to validate its effectiveness. Experimental results show that the
proposed system makes more accurate and satisfactory advertisements
than comparative systems.
Abstract: High employee turnover rate in Malaysia-s retail industry has become a major issue that needs to be addressed. This study determines the levels of job satisfaction, organizational commitment, and turnover intention of employees in a retail company in Malaysia. The relationships between job satisfaction and organizational commitment on turnover intention are also investigated. A questionnaire was developed using Job Descriptive Index, Organizational Commitment Questionnaire, and Lee and Mowday-s turnover intention items and data were collected from 62 respondents. The findings suggested that the respondents were moderately satisfied with job satisfaction facets such as promotion, work itself, co-workers, and supervisors but were unsatisfied with salary. They also had moderate commitment level with considerably high intention to leave the organization. All satisfaction facets (except for co-workers) and organizational commitment were significantly and negatively related to turnover intention. Based on the findings, retention strategies of retail employees were proposed.
Abstract: In order to make conventional implicit algorithm to be applicable in large scale parallel computers , an interface prediction and correction of discontinuous finite element method is presented to solve time-dependent neutron transport equations under 2-D cylindrical geometry. Domain decomposition is adopted in the computational domain.The numerical experiments show that our parallel algorithm with explicit prediction and implicit correction has good precision, parallelism and simplicity. Especially, it can reach perfect speedup even on hundreds of processors for large-scale problems.
Abstract: A physically based, spatially-distributed water quality model is being developed to simulate spatial and temporal distributions of material transport in the Great Lakes Watersheds of the U.S. Multiple databases of meteorology, land use, topography, hydrography, soils, agricultural statistics, and water quality were used to estimate nonpoint source loading potential in the study watersheds. Animal manure production was computed from tabulations of animals by zip code area for the census years of 1987, 1992, 1997, and 2002. Relative chemical loadings for agricultural land use were calculated from fertilizer and pesticide estimates by crop for the same periods. Comparison of these estimates to the monitored total phosphorous load indicates that both point and nonpoint sources are major contributors to the total nutrient loads in the study watersheds, with nonpoint sources being the largest contributor, particularly in the rural watersheds. These estimates are used as the input to the distributed water quality model for simulating pollutant transport through surface and subsurface processes to Great Lakes waters. Visualization and GIS interfaces are developed to visualize the spatial and temporal distribution of the pollutant transport in support of water management programs.
Abstract: Electronics Products that achieve high levels of integrated communications, computing and entertainment, multimedia features in small, stylish and robust new form factors are winning in the market place. Due to the high costs that an industry may undergo and how a high yield is directly proportional to high profits, IC (Integrated Circuit) manufacturers struggle to maximize yield, but today-s customers demand miniaturization, low costs, high performance and excellent reliability making the yield maximization a never ending research of an enhanced assembly process. With factors such as minimum tolerances, tighter parameter variations a systematic approach is needed in order to predict the assembly process. In order to evaluate the quality of upcoming circuits, yield models are used which not only predict manufacturing costs but also provide vital information in order to ease the process of correction when the yields fall below expectations. For an IC manufacturer to obtain higher assembly yields all factors such as boards, placement, components, the material from which the components are made of and processes must be taken into consideration. Effective placement yield depends heavily on machine accuracy and the vision of the system which needs the ability to recognize the features on the board and component to place the device accurately on the pads and bumps of the PCB. There are currently two methods for accurate positioning, using the edge of the package and using solder ball locations also called footprints. The only assumption that a yield model makes is that all boards and devices are completely functional. This paper will focus on the Monte Carlo method which consists in a class of computational algorithms (information processed algorithms) which depends on repeated random samplings in order to compute the results. This method utilized in order to recreate the simulation of placement and assembly processes within a production line.
Abstract: E-learning is not restricted to the use of new technologies for the online content, but also induces the adoption of new approaches to improve the quality of education. This quality depends on the ability of these approaches (technical and pedagogical) to provide an adaptive learning environment. Thus, the environment should include features that convey intentions and meeting the educational needs of learners by providing a customized learning path to acquiring a competency concerned In our proposal, we believe that an individualized learning path requires knowledge of the learner. Therefore, it must pass through a personalization of diagnosis to identify precisely the competency gaps to fill, and reduce the cognitive load To personalize the diagnosis and pertinently measure the competency gap, we suggest implementing the formative assessment in the e-learning environment and we propose the introduction of a pre-regulation process in the area of formative assessment, involving its individualization and implementation in e-learning.
Abstract: On the basis of Bayesian inference using the
maximizer of the posterior marginal estimate, we carry out phase
unwrapping using multiple interferograms via generalized mean-field
theory. Numerical calculations for a typical wave-front in remote
sensing using the synthetic aperture radar interferometry, phase
diagram in hyper-parameter space clarifies that the present method
succeeds in phase unwrapping perfectly under the constraint of
surface- consistency condition, if the interferograms are not corrupted
by any noises. Also, we find that prior is useful for extending a phase
in which phase unwrapping under the constraint of the
surface-consistency condition. These results are quantitatively
confirmed by the Monte Carlo simulation.
Abstract: In CMOS integrated circuit design there is a trade-off between static power consumption and technology scaling. Recently, the power density has increased due to combination of higher clock speeds, greater functional integration, and smaller process geometries. As a result static power consumption is becoming more dominant. This is a challenge for the circuit designers. However, the designers do have a few methods which they can use to reduce this static power consumption. But all of these methods have some drawbacks. In order to achieve lower static power consumption, one has to sacrifice design area and circuit performance. In this paper, we propose a new method to reduce static power in the CMOS VLSI circuit using Variable Body Biasing technique without being penalized in area requirement and circuit performance.
Abstract: Food and fibre production in arid and semi-arid regions has emerged as one of the major challenges for various socio-economic and political reasons such as the food security and self-sufficiency. Productive use of the renewable water resources has risen on top ofthe decision-making agenda. For this reason, efficient operation and maintenance of modern irrigation and drainage schemes become part and parcel and indispensible reality in agricultural policy making arena. The aim of this paper is to investigate the complexity of operating and maintaining such schemes, mainly focussing on challenges which enhance and opportunities that impedsustainable food and fibre production. The methodology involved using secondary data complemented byroutine observations and stakeholders views on issues that influence the O&M in the Dez command area. The SPSS program was used as an analytical framework for data analysis and interpretation.Results indicate poor application efficiency in most croplands, much of which is attributed to deficient operation of conveyance and distribution canals. These in turn, are reportedly linked to inadequate maintenance of the pumping stations and hydraulic structures like turnouts,flumes and other control systems particularly in the secondary and tertiary canals. Results show that the aforementioned deficiencies have been the major impediment to establishing regular flow toward the farm gates which subsequently undermine application efficiency and tillage operationsat farm level. Results further show that accumulative impact of such deficiencies has been the major causes of poorcrop yield and quality that deem production system in these croplands uneconomic. Results further show that the present state might undermine the sustainability of agricultural system in the command area. The overall conclusion being that present water management is unlikely to be responsive to challenges that the sector faces. And in the absence of coherent measures to shift the status quo situation in favour of more productive resource use, it would be hard to fulfil the objectives of the National Economic and Socio-cultural Development Plans.