Abstract: This paper presents the impact study of GTO Controlled Series Capacitor (GCSC) parameters on measured impedance (Zseen) by MHO distance relays for single transmission line high voltage 220 kV in the presence of single phase to earth fault with fault resistance (RF). The study deals with a 220 kV single electrical transmission line of Eastern Algerian transmission networks at Group Sonelgaz (Algerian Company of Electrical and Gas) compensated by series Flexible AC Transmission System (FACTS) i.e. GCSC connected at midpoint of the transmission line. The transmitted active and reactive powers are controlled by three GCSC-s. The effects of maximum reactive power injected as well as injected maximum voltage by GCSC on distance relays measured impedance is treated. The simulations results investigate the effects of GCSC injected parameters: variable reactance (XGCSC), variable voltage (VGCSC) and reactive power injected (QGCSC) on measured resistance and reactance in the presence of earth fault with resistance fault varied between 5 to 50 Ω for three cases study.
Abstract: Today with the rapid growth of telecommunications equipment, electronic and developing more and more networks of power, influence of electromagnetic waves on one another has become hot topic discussions. So in this article, this issue and appropriate mechanisms for EMC operations have been presented. First, impact of high voltage lines on the surrounding environment especially on the control room has been investigated, then to reduce electromagnetic radiation, various methods of shielding are provided and shielding effectiveness of them has been compared. It should be expressed that simulations have been done by the finite element method (FEM).
Abstract: Wireless sensor networks (WSN) are currently
receiving significant attention due to their unlimited potential. These
networks are used for various applications, such as habitat
monitoring, automation, agriculture, and security. The efficient nodeenergy
utilization is one of important performance factors in wireless
sensor networks because sensor nodes operate with limited battery
power. In this paper, we proposed the MiSense hierarchical cluster
based routing algorithm (MiCRA) to extend the lifetime of sensor
networks and to maintain a balanced energy consumption of nodes.
MiCRA is an extension of the HEED algorithm with two levels of
cluster heads. The performance of the proposed protocol has been
examined and evaluated through a simulation study. The simulation
results clearly show that MiCRA has a better performance in terms of
lifetime than HEED. Indeed, MiCRA our proposed protocol can
effectively extend the network lifetime without other critical
overheads and performance degradation. It has been noted that there
is about 35% of energy saving for MiCRA during the clustering
process and 65% energy savings during the routing process compared
to the HEED algorithm.
Abstract: This paper presents two simplified models to
determine nodal voltages in power distribution networks. These
models allow estimating the impact of the installation of reactive
power compensations equipments like fixed or switched capacitor
banks. The procedure used to develop the models is similar to the
procedure used to develop linear power flow models of transmission
lines, which have been widely used in optimization problems of
operation planning and system expansion. The steady state non-linear
load flow equations are approximated by linear equations relating the
voltage amplitude and currents. The approximations of the linear
equations are based on the high relationship between line resistance
and line reactance (ratio R/X), which is valid for power distribution
networks. The performance and accuracy of the models are evaluated
through comparisons with the exact results obtained from the
solution of the load flow using two test networks: a hypothetical
network with 23 nodes and a real network with 217 nodes.
Abstract: The dynamics of User Datagram Protocol (UDP) traffic
over Ethernet between two computers are analyzed using nonlinear
dynamics which shows that there are two clear regimes in the data
flow: free flow and saturated. The two most important variables
affecting this are the packet size and packet flow rate. However,
this transition is due to a transcritical bifurcation rather than phase
transition in models such as in vehicle traffic or theorized large-scale
computer network congestion. It is hoped this model will help lay
the groundwork for further research on the dynamics of networks,
especially computer networks.
Abstract: High speed networks provide realtime variable bit rate
service with diversified traffic flow characteristics and quality
requirements. The variable bit rate traffic has stringent delay and
packet loss requirements. The burstiness of the correlated traffic
makes dynamic buffer management highly desirable to satisfy the
Quality of Service (QoS) requirements. This paper presents an
algorithm for optimization of adaptive buffer allocation scheme for
traffic based on loss of consecutive packets in data-stream and buffer
occupancy level. Buffer is designed to allow the input traffic to be
partitioned into different priority classes and based on the input
traffic behavior it controls the threshold dynamically. This algorithm
allows input packets to enter into buffer if its occupancy level is less
than the threshold value for priority of that packet. The threshold is
dynamically varied in runtime based on packet loss behavior. The
simulation is run for two priority classes of the input traffic –
realtime and non-realtime classes. The simulation results show that
Adaptive Partial Buffer Sharing (ADPBS) has better performance
than Static Partial Buffer Sharing (SPBS) and First In First Out
(FIFO) queue under the same traffic conditions.
Abstract: Supply chain networks are frequently hit by
unplanned events which lead to disruptions and cause operational and
financial consequences. It is neither possible to avoid disruption risk
entirely, nor are network members able to prepare for every possible
disruptive event. Therefore a continuity planning should be set up
which supports effective operational responses in supply chain
networks in times of emergencies. In this research network related
degrees of freedom which determine the options for responsive
actions are derived from interview data. The findings are further
embedded into a common risk management process. The paper
provides support for researchers and practitioners to identify the
network related options for responsive actions and to determine the
need for improving the reaction capabilities.
Abstract: The major objective of this paper is to introduce a new method to select genes from DNA microarray data. As criterion to select genes we suggest to measure the local changes in the correlation graph of each gene and to select those genes whose local changes are largest. More precisely, we calculate the correlation networks from DNA microarray data of cervical cancer whereas each network represents a tissue of a certain tumor stage and each node in the network represents a gene. From these networks we extract one tree for each gene by a local decomposition of the correlation network. The interpretation of a tree is that it represents the n-nearest neighbor genes on the n-th level of a tree, measured by the Dijkstra distance, and, hence, gives the local embedding of a gene within the correlation network. For the obtained trees we measure the pairwise similarity between trees rooted by the same gene from normal to cancerous tissues. This evaluates the modification of the tree topology due to tumor progression. Finally, we rank the obtained similarity values from all tissue comparisons and select the top ranked genes. For these genes the local neighborhood in the correlation networks changes most between normal and cancerous tissues. As a result we find that the top ranked genes are candidates suspected to be involved in tumor growth. This indicates that our method captures essential information from the underlying DNA microarray data of cervical cancer.
Abstract: In a particular case of behavioural model reduction by ANNs, a validity domain shortening has been found. In mechanics, as in other domains, the notion of validity domain allows the engineer to choose a valid model for a particular analysis or simulation. In the study of mechanical behaviour for a cantilever beam (using linear and non-linear models), Multi-Layer Perceptron (MLP) Backpropagation (BP) networks have been applied as model reduction technique. This reduced model is constructed to be more efficient than the non-reduced model. Within a less extended domain, the ANN reduced model estimates correctly the non-linear response, with a lower computational cost. It has been found that the neural network model is not able to approximate the linear behaviour while it does approximate the non-linear behaviour very well. The details of the case are provided with an example of the cantilever beam behaviour modelling.
Abstract: The evaluation of residual reliability of large sized
parallel computer interconnection systems is not practicable with
the existing methods. Under such conditions, one must go for
approximation techniques which provide the upper bound and lower
bound on this reliability. In this context, a new approximation method
for providing bounds on residual reliability is proposed here. The
proposed method is well supported by two algorithms for simulation
purpose. The bounds on residual reliability of three different categories
of interconnection topologies are efficiently found by using
the proposed method
Abstract: Using neural network we try to model the unknown function f for given input-output data pairs. The connection strength of each neuron is updated through learning. Repeated simulations of crisp neural network produce different values of weight factors that are directly affected by the change of different parameters. We propose the idea that for each neuron in the network, we can obtain quasi-fuzzy weight sets (QFWS) using repeated simulation of the crisp neural network. Such type of fuzzy weight functions may be applied where we have multivariate crisp input that needs to be adjusted after iterative learning, like claim amount distribution analysis. As real data is subjected to noise and uncertainty, therefore, QFWS may be helpful in the simplification of such complex problems. Secondly, these QFWS provide good initial solution for training of fuzzy neural networks with reduced computational complexity.
Abstract: With the development of the Internet, E-commerce is
growing at an exponential rate, and lots of online stores are built up to
sell their goods online. A major factor influencing the successful
adoption of E-commerce is consumer-s trust. For new or unknown
Internet business, consumers- lack of trust has been cited as a major
barrier to its proliferation. As web sites provide key interface for
consumer use of E-Commerce, we investigate the design of web site to
build trust in E-Commerce from a design science approach. A
conceptual model is proposed in this paper to describe the ontology of
online transaction and human-computer interaction. Based on this
conceptual model, we provide a personalized webpage design
approach using Bayesian networks learning method. Experimental
evaluation are designed to show the effectiveness of web
personalization in improving consumer-s trust in new or unknown
online store.
Abstract: Distributed wireless sensor network consist on several
scattered nodes in a knowledge area. Those sensors have as its only
power supplies a pair of batteries that must let them live up to five
years without substitution. That-s why it is necessary to develop
some power aware algorithms that could save battery lifetime as
much as possible. In this is document, a review of power aware
design for sensor nodes is presented. As example of implementations,
some resources and task management, communication, topology
control and routing protocols are named.
Abstract: With Power system movement toward restructuring along with factors such as life environment pollution, problems of transmission expansion and with advancement in construction technology of small generation units, it is expected that small units like wind turbines, fuel cells, photovoltaic, ... that most of the time connect to the distribution networks play a very essential role in electric power industry. With increase in developing usage of small generation units, management of distribution networks should be reviewed. The target of this paper is to present a new method for optimal management of active and reactive power in distribution networks with regard to costs pertaining to various types of dispersed generations, capacitors and cost of electric energy achieved from network. In other words, in this method it-s endeavored to select optimal sources of active and reactive power generation and controlling equipments such as dispersed generations, capacitors, under load tapchanger transformers and substations in a way that firstly costs in relation to them are minimized and secondly technical and physical constraints are regarded. Because the optimal management of distribution networks is an optimization problem with continuous and discrete variables, the new evolutionary method based on Ant Colony Algorithm has been applied. The simulation results of the method tested on two cases containing 23 and 34 buses exist and will be shown at later sections.
Abstract: Whereas cellular wireless communication systems are
subject to short-and long-term fading. The effect of wireless channel
has largely been ignored in most of the teletraffic assessment
researches. In this paper, a mathematical teletraffic model is proposed
to estimate blocking and forced termination probabilities of cellular
wireless networks as a result of teletraffic behavior as well as the
outage of the propagation channel. To evaluate the proposed
teletraffic model, gamma inter-arrival and general service time
distributions have been considered based on wireless channel fading
effect. The performance is evaluated and compared with the classical
model. The proposed model is dedicated and investigated in different
operational conditions. These conditions will consider not only the
arrival rate process, but also, the different faded channels models.
Abstract: In this paper we present an adaptive method for image
compression that is based on complexity level of the image. The
basic compressor/de-compressor structure of this method is a multilayer
perceptron artificial neural network. In adaptive approach
different Back-Propagation artificial neural networks are used as
compressor and de-compressor and this is done by dividing the
image into blocks, computing the complexity of each block and then
selecting one network for each block according to its complexity
value. Three complexity measure methods, called Entropy, Activity
and Pattern-based are used to determine the level of complexity in
image blocks and their ability in complexity estimation are evaluated
and compared. In training and evaluation, each image block is
assigned to a network based on its complexity value. Best-SNR is
another alternative in selecting compressor network for image blocks
in evolution phase which chooses one of the trained networks such
that results best SNR in compressing the input image block. In our
evaluations, best results are obtained when overlapping the blocks is
allowed and choosing the networks in compressor is based on the
Best-SNR. In this case, the results demonstrate superiority of this
method comparing with previous similar works and JPEG standard
coding.
Abstract: A new conceptual architecture for low-level neural
pattern recognition is presented. The key ideas are that the brain
implements support vector machines and that support vectors are
represented as memory patterns in competitive queuing memories. A
binary classifier is built from two competitive queuing memories
holding positive and negative valence training examples respectively.
The support vector machine classification function is calculated in
synchronized evaluation cycles. The kernel is computed by bisymmetric
feed-forward networks feed by sensory input and by
competitive queuing memories traversing the complete sequence of
support vectors. Temporary summation generates the output
classification. It is speculated that perception apparatus in the brain
reuses structures that have evolved for enabling fluent execution of
prepared action sequences so that pattern recognition is built on
internalized motor programmes.
Abstract: In the present work, we propose a new technique to
enhance the learning capabilities and reduce the computation
intensity of a competitive learning multi-layered neural network
using the K-means clustering algorithm. The proposed model use
multi-layered network architecture with a back propagation learning
mechanism. The K-means algorithm is first applied to the training
dataset to reduce the amount of samples to be presented to the neural
network, by automatically selecting an optimal set of samples. The
obtained results demonstrate that the proposed technique performs
exceptionally in terms of both accuracy and computation time when
applied to the KDD99 dataset compared to a standard learning
schema that use the full dataset.
Abstract: This paper simulates the ad-hoc mesh network in rural areas, where such networks receive great attention due to their cost, since installing the infrastructure for regular networks in these areas is not possible due to the high cost. The distance between the communicating nodes is the most obstacles that the ad-hoc mesh network will face. For example, in Terranet technology, two nodes can communicate if they are only one kilometer far from each other. However, if the distance between them is more than one kilometer, then each node in the ad-hoc mesh networks has to act as a router that forwards the data it receives to other nodes. In this paper, we try to find the critical number of nodes which makes the network fully connected in a particular area, and then propose a method to enhance the intermediate node to accept to be a router to forward the data from the sender to the receiver. Much work was done on technological changes on peer to peer networks, but the focus of this paper will be on another feature which is to find the minimum number of nodes needed for a particular area to be fully connected and then to enhance the users to switch on their phones and accept to work as a router for other nodes. Our method raises the successful calls to 81.5% out of 100% attempt calls.
Abstract: Diagnosis can be achieved by building a model of a
certain organ under surveillance and comparing it with the real time
physiological measurements taken from the patient. This paper deals
with the presentation of the benefits of using Data Mining techniques
in the computer-aided diagnosis (CAD), focusing on the cancer
detection, in order to help doctors to make optimal decisions quickly
and accurately. In the field of the noninvasive diagnosis techniques,
the endoscopic ultrasound elastography (EUSE) is a recent elasticity
imaging technique, allowing characterizing the difference between
malignant and benign tumors. Digitalizing and summarizing the main
EUSE sample movies features in a vector form concern with the use
of the exploratory data analysis (EDA). Neural networks are then
trained on the corresponding EUSE sample movies vector input in
such a way that these intelligent systems are able to offer a very
precise and objective diagnosis, discriminating between benign and
malignant tumors. A concrete application of these Data Mining
techniques illustrates the suitability and the reliability of this
methodology in CAD.