Abstract: Use of the Internet and the World-Wide-Web
(WWW) has become widespread in recent years and mobile agent
technology has proliferated at an equally rapid rate. In this scenario
load balancing becomes important for P2P systems. Beside P2P
systems can be highly heterogeneous, i.e., they may consists of peers
that range from old desktops to powerful servers connected to
internet through high-bandwidth lines. There are various loads
balancing policies came into picture. Primitive one is Message
Passing Interface (MPI). Its wide availability and portability make it
an attractive choice; however the communication requirements are
sometimes inefficient when implementing the primitives provided by
MPI. In this scenario we use the concept of mobile agent because
Mobile agent (MA) based approach have the merits of high
flexibility, efficiency, low network traffic, less communication
latency as well as highly asynchronous. In this study we present
decentralized load balancing scheme using mobile agent technology
in which when a node is overloaded, task migrates to less utilized
nodes so as to share the workload. However, the decision of which
nodes receive migrating task is made in real-time by defining certain
load balancing policies. These policies are executed on PMADE (A
Platform for Mobile Agent Distribution and Execution) in
decentralized manner using JuxtaNet and various load balancing
metrics are discussed.
Abstract: This paper presents an iterative algorithm to find a
inverse kinematic solution of 5-DOF robot. The algorithm is to
minimize the iteration number. Since the 5-DOF robot cannot give full
orientation of tool. Only z-direction of tool is satisfied while rotation
of tool is determined by kinematic constraint. This work therefore
described how to specify the tool direction and let the tool rotation free.
The simulation results show that this algorithm effectively worked.
Using the proposed iteration algorithm, error due to inverse kinematics
converged to zero rapidly in 5 iterations. This algorithm was applied in
real welding robot and verified through various practical works.
Abstract: This paper examines the role of telecommunications in sustainable development of urban, rural and remote communities in the Northern Territory of Australia through the theoretical lens of Social Capital. Social Capital is a relatively new construct and is rapidly gaining interest among policy makers, politicians and researchers as a means to both describe and understand social and economic development. Increasingly, the concept of Social Capital, as opposed to the traditional economic indicators, is seen as a more accurate measure of well-being. Whilst the essence of Social Capital is quality social relations, the concept intersects with telecommunications and Information Communications Technology (ICT) in a number of ways. The potential of ICT to disseminate information quickly, to reach vast numbers of people simultaneously and to include the previously excluded, is immense. However, the exact nature of the relationship is not clearly defined. This paper examines the nexus between social relations of mutual benefit, telecommunications access and sustainable development. A mixed methodological approach was used to test the hypothesis that No relationship exists between Social Capital and access to telecommunications services and facilities. Four communities, which included two urban, a rural and a remote Indigenous community in the Northern Territory of Australia are the focus of this research paper.
Abstract: an intelligent BRT system is necessary when
communities looking for new ways to use high capacity rapid transit
at a reduced cost.This paper will describe the intelligent control
system that works with Datacenter. With the help of GPS system, the
data center can monitor the situation of each bus and bus station.
Through RFID technology, bus station and traffic light can transfer
data with bus and by Wimax communication technology all of parts
can talk together; data center learns all information about the location
of bus, the arrival of bus in each station and the number of passengers
in station and bus.Finally, the paper presents the case study of those
theories in Tehran BRT.
Abstract: In this paper, we propose a novel fast search algorithm for short MPEG video clips from video database. This algorithm is based on the adjacent pixel intensity difference quantization (APIDQ) algorithm, which had been reliably applied to human face recognition previously. An APIDQ histogram is utilized as the feature vector of the frame image. Instead of fully decompressed video frames, partially decoded data, namely DC images are utilized. Combined with active search [4], a temporal pruning algorithm, fast and robust video search can be realized. The proposed search algorithm has been evaluated by 6 hours of video to search for given 200 MPEG video clips which each length is 15 seconds. Experimental results show the proposed algorithm can detect the similar video clip in merely 80ms, and Equal Error Rate (ERR) of 3 % is achieved, which is more accurately and robust than conventional fast video search algorithm.
Abstract: Motion control of flexible arms is more difficult than
that of rigid arms, however utilizing its dynamics enables improved
performance such as a fast motion in short operation time. This paper
investigates a ball throwing robot with one rigid link and one flexible
link. This robot throws a ball at a set speed with a proper control torque.
A mathematical model of this ball throwing robot is derived through
Hamilton’s principle. Several patterns of torque input are designed and
tested through the proposed simulation models. The parameters of
each torque input pattern is optimized and determined by chaos
embedded vector evaluated particle swarm optimization (CEVEPSO).
Then, the residual vibration of the manipulator after throwing is
suppressed with input shaping technique. Finally, a real experiment is
set up for the model checking.
Abstract: Among many agro- based cottage industries in India
sericulture has been promoted as an agro-based, labor intensive, rural
oriented cottage industry, providing gainful employment mainly to
the weaker and marginalized section of the society specially tribal.
Sericulture occupies the place of pride in the rural economy can be
practiced even with very low land holding, low gestation, high
returns make sericulture an ideal program, requiring little capital
investment. In 2010-2011 the employment in sericulture sector was
72.5 lakh persons. The involvement of landless rural people in tasar
sericulture is because they understood its potential for rural and tribal
upliftment. This article demonstrates that certain developmental
initiatives have been playing an important role in the socio-economic
progress of tribal masses in Raigarh district and explains the
increased returns from sericulture as a result of development
programs. The study concludes with some suggestions to improve the
long term feasibility of sericulture.
Abstract: This paper proposes a resonant dc link in PWM ac
chopper. This can solve the spike problems and also reduce the
switching loss. The configuration and PWM pattern of the proposed
technique are presented. The simulation results are used to confirm
the theory.
Abstract: The main goal of data mining is to extract accurate, comprehensible and interesting knowledge from databases that may be considered as large search spaces. In this paper, a new, efficient type of Genetic Algorithm (GA) called uniform two-level GA is proposed as a search strategy to discover truly interesting, high-level prediction rules, a difficult problem and relatively little researched, rather than discovering classification knowledge as usual in the literatures. The proposed method uses the advantage of uniform population method and addresses the task of generalized rule induction that can be regarded as a generalization of the task of classification. Although the task of generalized rule induction requires a lot of computations, which is usually not satisfied with the normal algorithms, it was demonstrated that this method increased the performance of GAs and rapidly found interesting rules.
Abstract: Sustainable development is a concept which was
originated in Burtland commission in 1978. Although this concept
was born with environmental aspects, it is penetrated in all areas
rapidly, turning into a dominate view of planning. Concentrating on
future generation issue, especially when talking about heritage has a
long story. Each approach with all of its characteristics illustrates
differences in planning, hence planning always reflects the dominate
idea of its age. This paper studies sustainable development in
planning for historical cities with the aim of finding ways to deal
with heritage in planning for historical cities in Iran. Through this, it
will be illustrated how challenges between sustainable concept and
heritage could be concluded in planning.
Consequently, the paper will emphasize on:
Sustainable development in city planning
Trends regarding heritage
Challenges due to planning for historical cities in Iran
For the first two issues, documentary method regarding the
sustainable development and heritage literature is considered. As the
next step focusing on Iranian historical cities require considering the
urban planning and management structure and identifying the main
challenges related to heritage, so analyzing challenges regarding
heritage is considered. As the result it would be illustrated that key
issue in such planning is active conservation to improve and use the
potential of heritage while it's continues conservation is guaranteed.
By emphasizing on the planning system in Iran it will be obvious that
some reforms are needed in this system and its way of relating with
heritage. The main weakness in planning for historical cities in Iran
is the lack of independent city management. Without this factor
achieving active conservation as the main factor of sustainable
development would not be possible.
Abstract: Traditional development of wireless sensor network
mote is generally based on SoC1 platform. Such method of
development faces three main drawbacks: lack of flexibility in terms
of development due to low resource and rigid architecture of SoC;
low capability of evolution and portability versus performance if
specific micro-controller architecture features are used; and the rapid
obsolescence of micro-controller comparing to the long lifetime of
power plants or any industrial installations. To overcome these
drawbacks, we have explored a new approach of development of
wireless sensor network mote using a hybrid FPGA technology. The
application of such approach is illustrated through the
implementation of an innovative wireless sensor network protocol
called OCARI.
Abstract: Traditionally, wind tunnel models are made of metal
and are very expensive. In these years, everyone is looking for ways
to do more with less. Under the right test conditions, a rapid
prototype part could be tested in a wind tunnel. Using rapid prototype
manufacturing techniques and materials in this way significantly
reduces time and cost of production of wind tunnel models. This
study was done of fused deposition modeling (FDM) and their ability
to make components for wind tunnel models in a timely and cost
effective manner. This paper discusses the application of wind tunnel
model configuration constructed using FDM for transonic wind
tunnel testing. A study was undertaken comparing a rapid
prototyping model constructed of FDM Technologies using
polycarbonate to that of a standard machined steel model. Testing
covered the Mach range of Mach 0.3 to Mach 0.75 at an angle-ofattack
range of - 2° to +12°. Results from this study show relatively
good agreement between the two models and rapid prototyping
Method reduces time and cost of production of wind tunnel models.
It can be concluded from this study that wind tunnel models
constructed using rapid prototyping method and materials can be
used in wind tunnel testing for initial baseline aerodynamic database
development.
Abstract: A therapeutic success is the aim of any therapeutic
intervention, but a therapeutic failure is the other side of the same
coin. The purpose of this study is to present the activity of a personal
development group, composed of 14 participants (psychologists,
doctors and a priest) registered for a 2 days course of integrative
psychotherapy. The objectives of this study are centred on: the
management of the personal development group breaking moment
realized by the therapist/trainer; the analysis of the trainer’s personal
situation and of some group participants and the brief presentation of
the main work methods applied on participants in the repairing of the
therapeutic relation and in the counter transfer management. The
therapist’s orientation is an integrative one and the demarche realized
includes T.A. techniques, role play, Gestalt and family systemic
psychotherapy. The conclusions obtained represent landmarks for the
future activity within that group and strengthen the therapeutic
relation with the group.
Abstract: Capital structure is one of the most important financial
decisions in corporate financing strategy. It involves the choice of
debt and equity level in financing a company-s operations. This study
aims to investigate whether the capital structure choice of Malaysian
electrical and electronic manufacturing companies that are listed in
the Bursa Malaysia can be explained by factors that have been found
by most studies as dominant determinants of capital structure
(company size, profitability, asset tangibility, liquidity and growth).
Using debt ratio as the proxy for capital structure and applying
pooled ordinary least square multiple regression estimation, the
results showed that on average, Malaysian electrical and electronic
manufacturing companies used less debt in funding their business
operations. The findings also showed that size and asset tangibility
has a significant positive relationship with debt level, while liquidity
has a negative significant relationship with leverage.
Abstract: Breast cancer is the most common malignancy in the
world among women. Many therapies have been designed to treat
this disease. Mamectomy, chemotherapy and radiotherapy are still
the main therapies of breast cancer. However, the results were
unsatisfactory and still far from the ideal treatment.
PM 701is a natural product, has anticancer activity. The bioactive
fraction PMF and subfraction PMFK had been isolated from PM701.
PM 701 and its fractions were proved to have a cytotoxic properties
against different cancer cell lines. This article is directed for the
further examination of lyophilized PM701 and its active fractions on
the growth of breast cancer cells (MCF-7). PM 701, PMF or PMFK
were adding to the cultural medium, where MCF-7 is incubated.
PM 701, PMF or PMFK were able to inhibit significantly the
proliferation of MCF-7 cells, Moreover these new agents were
proved to induce apoptosis of the breast cancer cells; through its
direct effect on the nuclei.
Abstract: Interventional cardiologists are at greater risk from
radiation exposure as a result of the procedures they undertake than
most other medical specialists. A study was performed to evaluate
operator dose during interventional cardiology procedures and to
establish methods of operator dose reduction with a radiation
protective device. Different procedure technique and use of
protective tools can explain big difference in the annual equivalent
dose received by the professionals. Strategies to prevent and
monitor radiation exposure, advanced protective shielding and
effective radiation monitoring methods should be applied.
Abstract: Biological data has several characteristics that strongly differentiate it from typical business data. It is much more complex, usually large in size, and continuously changes. Until recently business data has been the main target for discovering trends, patterns or future expectations. However, with the recent rise in biotechnology, the powerful technology that was used for analyzing business data is now being applied to biological data. With the advanced technology at hand, the main trend in biological research is rapidly changing from structural DNA analysis to understanding cellular functions of the DNA sequences. DNA chips are now being used to perform experiments and DNA analysis processes are being used by researchers. Clustering is one of the important processes used for grouping together similar entities. There are many clustering algorithms such as hierarchical clustering, self-organizing maps, K-means clustering and so on. In this paper, we propose a clustering algorithm that imitates the ecosystem taking into account the features of biological data. We implemented the system using an Ant-Colony clustering algorithm. The system decides the number of clusters automatically. The system processes the input biological data, runs the Ant-Colony algorithm, draws the Topic Map, assigns clusters to the genes and displays the output. We tested the algorithm with a test data of 100 to1000 genes and 24 samples and show promising results for applying this algorithm to clustering DNA chip data.
Abstract: There are different kinds of online systems on the Internet for people who need support and develop new knowledge. Online communities and Ask the Expert systems are two such systems. In the health care area, the number of users of these systems has increased at a rapid pace. Interactions with medical trained experts take place online, and people with concerns about similar health problems come together to share experiences and advice. The systems are also used as storages and browsed for health information. Over the years, studies have been conducted of the usage of the different systems. However, in what ways the systems can be used together to enhance learning has not been explored. This paper presents results from a study of online health-communities and an Ask the Expert system for people who suffer from overweight. Differences and similarities in regards to posted issues and replies are discussed, and suggestions for a new holistic design of the two systems are presented.
Abstract: This study examines causal link between energy use and economic growth for five South Asian countries over period 1971-2006. Panel cointegration, ECM and FMOLS are applied for short and long run estimates. In short run unidirectional causality from per capita GDP to per capita energy consumption is found, but not vice versa. In long run one percent increase in per capita energy consumption tend to decrease 0.13 percent per capita GDP. i.e. Energy use discourage economic growth. This short and long run relationship indicate energy shortage crisis in South Asia due to increased energy use coupled with insufficient energy supply. Beside this long run estimated coefficient of error term suggest that short term adjustment to equilibrium are driven by adjustment back to long run equilibrium. Moreover, per capita energy consumption is responsive to adjustment back to equilibrium and it takes 59 years approximately. It specifies long run feedback between both variables.
Abstract: This paper proposes an innovative methodology for
Acceptance Sampling by Variables, which is a particular category of
Statistical Quality Control dealing with the assurance of products
quality. Our contribution lies in the exploitation of machine learning
techniques to address the complexity and remedy the drawbacks of
existing approaches. More specifically, the proposed methodology
exploits Artificial Neural Networks (ANNs) to aid decision making
about the acceptance or rejection of an inspected sample. For any
type of inspection, ANNs are trained by data from corresponding
tables of a standard-s sampling plan schemes. Once trained, ANNs
can give closed-form solutions for any acceptance quality level and
sample size, thus leading to an automation of the reading of the
sampling plan tables, without any need of compromise with the
values of the specific standard chosen each time. The proposed
methodology provides enough flexibility to quality control engineers
during the inspection of their samples, allowing the consideration of
specific needs, while it also reduces the time and the cost required for
these inspections. Its applicability and advantages are demonstrated
through two numerical examples.