Abstract: Oxyleotris marmorata is considered as
undomesticated fish, and its culture occasionally faces a problem of
food deprivation. The present study aims to evaluate alteration of
hematological indices, blood chemical associated with liver function
during 4 weeks of fasting. A non-linear relationships between fasting
days and hematological parameters (red blood cell number; y = -
0.002x2 + 0.041x + 1.249; R2=0.915, P0.05), mean corpuscular
volume; y = -0.180x2 + 2.183x + 149.61; R2=0.732, P>0.05, mean
corpuscular hemoglobin; y = -0.041x2 + 0.862x + 29.864; R2=0.818,
P>0.05 and mean corpuscular hemoglobin concentration; y = -
0.044x2 + 0.711x + 21.580; R2=0.730, P>0.05) were demonstrated.
Significant change in hematocrit (Ht) during fasting period was
observed. Ht elevated sharply increase at the first weeks of fasting
period. Higher Ht also was detected during week 2-4 of fasting time.
The significant reduction of hepatosomatic index was observed (y = -
0.007x2 - 0.096x + 1.414; R2=0.968, P0.05, serum glutamic oxaloacetic transaminase;
y = 0.005x2 – 0.201x2 + 1.297x + 33.256; R2=1, P0.05). Taken together, prolonged fasting has
deleterious effects on hematological indices, liver mass and enzyme
associated in liver function. The marked adverse effects occurred
after the first week of fasting state.
Abstract: Pabdeh shaly formation (Paleocene-Oligomiocene)
has been expanded in Fars, Khozestan and Lorestan. The lower
lithostratigraphic limit of this formation in Shiraz area is
distinguished from Gurpi formation by purple shale. Its upper limit is
gradational and conformable with Asmari formation. In order to
study sequence stratigraphy and microfacies of Pabdeh formation in
Shiraz area, one stratigraphic section have been chosen (Zanjiran
section). Petrographic studies resulted in the identification of 9
pelagic and calciturbidite microfacies. The calciturbidite microfacies
have been formed when the sea level was high, the rate of carbonate
deposition was high and it slumped into the deep marine. Sequence
stratigraphy studies show that Pabdeh formation in the studied zone
consists of two depositional sequences (DS) that the lower contact is
erosional (purple shale - type one, SBI or type two, SB2) and the
upper contact is correlative conformity (type two, SB2).
Abstract: Malate dehydrogenase-glutamate oxaloacetate
aminotransferase (MDh-GOAT) enzyme complex (the EC) was
isolated and purified from wheat and rise, their some main physicchemical
properties were studied. Michael-s constants of the EC
MDh-GOAT to malate, glutamate and NAD were investigated. This
kinetic results show a high relationship to glutamate. Taking into
account important role of the the EC in catabolism of glutamate – the
central amino acid of a nitric exchange, there is a sharp necessity of
deeper studying of this enzyme complex. Therefore the basic purpose
of the work is studying the basic physical and chemical properties of
this enzyme complex discovered by us, which would be very
important for understanding the mechanisms of reaction catalyzed by
the EC.
Abstract: One of the most ancient humankind concerns is knowledge formalization i.e. what a concept is. Concept Analysis, a branch of analytical philosophy, relies on the purpose of decompose the elements, relations and meanings of a concept. This paper aims at presenting a method to make a concept analysis obtaining a knowledge representation suitable to be processed by a computer system using either object-oriented or ontology technologies. Security notion is, usually, known as a set of different concepts related to “some kind of protection". Our method concludes that a more general framework for the concept, despite it is dynamic, is possible and any particular definition (instantiation) depends on the elements used by its construction instead of the concept itself.
Abstract: According to the governmental data, the cases of oral
cancers doubled in the past 10 years. This had brought heavy burden to
the patients- family, the society, and the country. The literature
generally evidenced the betel nut contained particular chemicals that
can cause oral cancers. Research in Taiwan had also proofed that 90
percent of oral cancer patients had experience of betel nut chewing. It
is thus important to educate the betel-nut hobbyists to cease such a
hazardous behavior. A program was then organized to establish
several training classes across different areas specific to help ceasing
this particular habit. Purpose of this research was to explore the
attitude and intention toward ceasing betel-nut chewing before and
after attending the training classes. 50 samples were taken from a
ceasing class with average age at 45 years old with high school
education (54%). 74% of the respondents were male in service or
agricultural industries. Experiences in betel-nut chewing were 5-20
years with a dose of 1-20 pieces per day. The data had shown that 60%
of the respondents had cigarette smoking habit, and 30% of the
respondents were concurrently alcoholic dependent. Research results
indicated that the attitude, intentions, and the knowledge on oral
cancers were found significant different between before and after
attendance. This provided evidence for the effectiveness of the training
class. However, we do not perform follow-up after the class.
Noteworthy is the test result also shown that participants who were
drivers as occupation, or habitual smokers or alcoholic dependents
would be less willing to quit the betel-nut chewing. The test results
indicated as well that the educational levels and the type of occupation
may have significant impacts on an individual-s decisions in taking
betel-nut or substance abuse.
Abstract: Power transformer consists of components which are
under consistent thermal and electrical stresses. The major
component which degrades under these stresses is the paper
insulation of the power transformer. At site, lightning impulses and
cable faults may cause the winding deformation. In addition, the
winding may deform due to impact during transportation. A
deformed winding will excite more stress to its insulating paper thus
will degrade it. Insulation degradation will shorten the life-span of
the transformer. Currently there are two methods of detecting the
winding deformation which are Sweep Frequency Response
Analysis (SFRA) and Low Voltage Impulse Test (LVI). The latter
injects current pulses to the winding and capture the admittance
plot. In this paper, a transformer which experienced overheating and
arcing was identified, and both SFRA and LVI were performed.
Next, the transformer was brought to the factory for untanking. The
untanking results revealed that the LVI is more accurate than the
SFRA method for this case study.
Abstract: This paper presents the study of hardness profile of spur gear heated by induction heating process in function of the machine parameters, such as the power (kW), the heating time (s) and the generator frequency (kHz). The global work is realized by 3D finite-element simulation applied to the process by coupling and resolving the electromagnetic field and the heat transfer problems, and it was performed in three distinguished steps. First, a Comsol 3D model was built using an adequate formulation and taking into account the material properties and the machine parameters. Second, the convergence study was conducted to optimize the mesh. Then, the surface temperatures and the case depths were deeply analyzed in function of the initial current density and the heating time in medium frequency (MF) and high frequency (HF) heating modes and the edge effect were studied. Finally, the simulations results are validated using experimental tests.
Abstract: The cDNA encoding the 326 amino acids of a Class I
basic chitinase gene from Leucaena leucocephala de Wit (KB3,
Genbank accession: AAM49597) was cloned under the control of
CaMV35S promoter in pCAMBIA 1300 and transferred to
Koshihikari. Calli of Koshihikari rice was transformed with
agrobacterium with this construct expressing the chitinase and β-
glucouronidase (GUS). The frequencies of calli 90 % has been
obtained from rice seedlings cultured on NB medium. The high
regeneration frequencies, 74% was obtained from calli cultured on
regeneration medium containing 4 mg/l BAP, and 7 g/l phytagel at
25°C. Various factors were studied in order to establish a procedure
for the transformation of Koshihikari Agrobacterium tumefaciens.
Supplementation of 50 mM acetosyringone to the medium during
coculivation was important to enhance the frequency to transient
transformation. The 4 week-old scutellum-derived calli were
excellent starting materials. Selection medium based on NB medium
supplement with 40 mg/l hygromycin and 400 mg/l cefotaxime were
an optimized medium for selection of transformed rice calli. The
percentage of transformation 70 was obtained. Recombinant calli and
regenerated rice plants were checked the expression of chitinase and
gus by PCR, northern blot gel, southern blot gel, and gus assay.
Chitinase and gus were expressed in all parts of recombinant rice.
The rice line expressing the KB3 chiitnase was more resistant to the
blast fungus Fusarium monoliforme than control line.
Abstract: The UK Government has emphasized the role of Local Authorities as a key player in its flagship residential energy efficiency strategies, by identifying and targeting areas for energy efficiency improvements. Residential energy consumption in England is characterized by significant geographical variation in energy demand, which makes centralized targeting of areas for energy efficiency intervention difficult. This paper draws on research which aims to understand how demographic, social, economic, urban form and climatic factors influence the geographical variations in English residential gas consumption. The paper reports the findings of a multiple regression model that shows how 64% of the geographical variation in residential gas consumption is accounted for by variations in these factors. Results from this study, after further refinement and validation, can be used by Local Authorities to identify areas within their boundaries that have higher than expected gas consumption, these may be prime targets for energy efficiency initiatives.
Abstract: The avian phytohaemagglutinin skin test is being
proved as an in vivo system for the evaluation an avian in vivo T cell
mitogenicity. The test system was one week old Gallus domesticus
broiler Chickens. Five replicates were done for each of the whole,
1:10 dilutions of each of 0.05 IU tuberculin, tetanus immunoglobulin
and DPT vaccine as test materials. The evaluation parameters were
the skin indurations and lymphoblast percentages in bone marrow
lymphocytes.
Tuberculin indurations were 2.06 and 1.26mm for 0.05 IU
respectively while lymphoblast percent were 0.234 and 0.1
accordingly.
The skin indurations of 135mg/ml and 1.35mg/ml tetanus
immunoglobulin were 4.86 and 3.96mm while lymphoblast
percentages were 0.3 and 0.14 respectively.
The whole DPT and 1:10 concentration were with 4.5 and 3.2mm
while their lymphoblast percentages were 0.28 and 0.12 accordingly.
Thus the mitogenicity of the test materials was of dependant type.
Abstract: Recently, genetic algorithms (GA) and particle swarm optimization (PSO) technique have attracted considerable attention among various modern heuristic optimization techniques. The GA has been popular in academia and the industry mainly because of its intuitiveness, ease of implementation, and the ability to effectively solve highly non-linear, mixed integer optimization problems that are typical of complex engineering systems. PSO technique is a relatively recent heuristic search method whose mechanics are inspired by the swarming or collaborative behavior of biological populations. In this paper both PSO and GA optimization are employed for finding stable reduced order models of single-input- single-output large-scale linear systems. Both the techniques guarantee stability of reduced order model if the original high order model is stable. PSO method is based on the minimization of the Integral Squared Error (ISE) between the transient responses of original higher order model and the reduced order model pertaining to a unit step input. Both the methods are illustrated through numerical example from literature and the results are compared with recently published conventional model reduction technique.
Abstract: One of the processes of slope that occurs every year in Iran and some parts of world and cause a lot of criminal and financial harms is called landslide. They are plenty of method to stability landslide in soil and rock slides. The use of the best method with the least cost and in the shortest time is important for researchers. In this research, determining the best method of stability is investigated by using of Decision Support systems. DSS is made for this purpose and was used (for Hasan Salaran area in Kurdistan). Field study data from topography, slope, geology, geometry of landslide and the related features was used. The related data entered decision making managements programs (DSS) (ALES).Analysis of mass stability indicated the instability potential at present. Research results show that surface and sub surface drainage the best method of stabilizing. Analysis of stability shows that acceptable increase in security coefficient is a consequence of drainage.
Abstract: This is an application research presenting the
improvement of production quality using the six sigma solutions and
the analyses of benefit-cost ratio. The case of interest is the
production of tile-concrete. Such production has faced with the
problem of high nonconforming products from an inappropriate
surface coating and had low process capability based on the strength
property of tile. Surface coating and tile strength are the most critical
to quality of this product. The improvements followed five stages of
six sigma solutions. After the improvement, the production yield was
improved to 80% as target required and the defective products from
coating process was remarkably reduced from 29.40% to 4.09%. The
process capability based on the strength quality was increased from
0.87 to 1.08 as customer oriented. The improvement was able to save
the materials loss for 3.24 millions baht or 0.11 million dollars. The
benefits from the improvement were analyzed from (1) the reduction
of the numbers of non conforming tile using its factory price for
surface coating improvement and (2) the materials saved from the
increment of process capability. The benefit-cost ratio of overall
improvement was high as 7.03. It was non valuable investment in
define, measure, analyses and the initial of improve stages after that
it kept increasing. This was due to there were no benefits in define,
measure, and analyze stages of six sigma since these three stages
mainly determine the cause of problem and its effects rather than
improve the process. The benefit-cost ratio starts existing in the
improve stage and go on. Within each stage, the individual benefitcost
ratio was much higher than the accumulative one as there was an
accumulation of cost since the first stage of six sigma. The
consideration of the benefit-cost ratio during the improvement
project helps make decisions for cost saving of similar activities
during the improvement and for new project. In conclusion, the
determination of benefit-cost ratio behavior through out six sigma
implementation period provides the useful data for managing quality
improvement for the optimal effectiveness. This is the additional
outcome from the regular proceeding of six sigma.
Abstract: In this paper, transversal vibration of buried pipelines
during loading induced by underground explosions is analyzed. The
pipeline is modeled as an infinite beam on an elastic foundation, so
that soil-structure interaction is considered by means of transverse
linear springs along the pipeline. The pipeline behavior is assumed to
be ideal elasto-plastic which an ultimate strain value limits the plastic
behavior. The blast loading is considered as a point load, considering
the affected length at some point of the pipeline, in which the
magnitude decreases exponentially with time. A closed-form solution
for the quasi-static problem is carried out for both elastic and elasticperfect
plastic behaviors of pipe materials. At the end, a comparative
study on steel and polyethylene pipes with different sizes buried in
various soil conditions, affected by a predefined underground
explosion is conducted, in which effect of each parameter is
discussed.
Abstract: The issue of unintentional islanding in PV grid
interconnection still remains as a challenge in grid-connected
photovoltaic (PV) systems. This paper discusses the overview of
popularly used anti-islanding detection methods, practically applied
in PV grid-connected systems. Anti-islanding methods generally can
be classified into four major groups, which include passive methods,
active methods, hybrid methods and communication base methods.
Active methods have been the preferred detection technique over the
years due to very small non-detected zone (NDZ) in small scale
distribution generation. Passive method is comparatively simpler
than active method in terms of circuitry and operations. However, it
suffers from large NDZ that significantly reduces its performance.
Communication base methods inherit the advantages of active and
passive methods with reduced drawbacks. Hybrid method which
evolved from the combination of both active and passive methods
has been proven to achieve accurate anti-islanding detection by many
researchers. For each of the studied anti-islanding methods, the
operation analysis is described while the advantages and
disadvantages are compared and discussed. It is difficult to pinpoint a
generic method for a specific application, because most of the
methods discussed are governed by the nature of application and
system dependent elements. This study concludes that the setup and
operation cost is the vital factor for anti-islanding method selection in
order to achieve minimal compromising between cost and system
quality.
Abstract: This paper proposes a method, combining color and
layout features, for identifying documents captured from lowresolution
handheld devices. On one hand, the document image color
density surface is estimated and represented with an equivalent
ellipse and on the other hand, the document shallow layout structure
is computed and hierarchically represented. The combined color and
layout features are arranged in a symbolic file, which is unique for
each document and is called the document-s visual signature. Our
identification method first uses the color information in the
signatures in order to focus the search space on documents having a
similar color distribution, and finally selects the document having the
most similar layout structure in the remaining search space. Finally,
our experiment considers slide documents, which are often captured
using handheld devices.
Abstract: This paper presents a simplified version of Data Envelopment Analysis (DEA) - a conventional approach to evaluating the performance and ranking of competitive objects characterized by two groups of factors acting in opposite directions: inputs and outputs. DEA with a Perfect Object (DEA PO) augments the group of actual objects with a virtual Perfect Object - the one having greatest outputs and smallest inputs. It allows for obtaining an explicit analytical solution and making a step to an absolute efficiency. This paper develops this approach further and introduces a DEA model with Partially Perfect Objects. DEA PPO consecutively eliminates the smallest relative inputs or greatest relative outputs, and applies DEA PO to the reduced collections of indicators. The partial efficiency scores are combined to get the weighted efficiency score. The computational scheme remains simple, like that of DEA PO, but the advantage of the DEA PPO is taking into account all of the inputs and outputs for each actual object. Firm evaluation is considered as an example.
Abstract: Blood pulse is an important human physiological signal commonly used for the understanding of the individual physical health. Current methods of non-invasive blood pulse sensing require direct contact or access to the human skin. As such, the performances of these devices tend to vary with time and are subjective to human body fluids (e.g. blood, perspiration and skin-oil) and environmental contaminants (e.g. mud, water, etc). This paper proposes a simulation model for the novel method of non-invasive acquisition of blood pulse using the disturbance created by blood flowing through a localized magnetic field. The simulation model geometry represents a blood vessel, a permanent magnet, a magnetic sensor, surrounding tissues and air in 2-dimensional. In this model, the velocity and pressure fields in the blood stream are described based on Navier-Stroke equations and the walls of the blood vessel are assumed to have no-slip condition. The blood assumes a parabolic profile considering a laminar flow for blood in major artery near the skin. And the inlet velocity follows a sinusoidal equation. This will allow the computational software to compute the interactions between the magnetic vector potential generated by the permanent magnet and the magnetic nanoparticles in the blood. These interactions are simulated based on Maxwell equations at the location where the magnetic sensor is placed. The simulated magnetic field at the sensor location is found to assume similar sinusoidal waveform characteristics as the inlet velocity of the blood. The amplitude of the simulated waveforms at the sensor location are compared with physical measurements on human subjects and found to be highly correlated.
Abstract: Sharing the manufacturing facility through remote
operation and monitoring of a machining process is challenge for
effective use the production facility. Several automation tools in term
of hardware and software are necessary for successfully remote
operation of a machine. This paper presents a prototype of workpiece
holding attachment for remote operation of milling process by self
configuration the workpiece setup. The prototype is designed with
mechanism to reorient the work surface into machining spindle
direction with high positioning accuracy. Variety of parts geometry
is hold by attachment to perform single setup machining. Pin type
with array pattern additionally clamps the workpiece surface from
two opposite directions for increasing the machining rigidity.
Optimum pins configuration for conforming the workpiece geometry
with minimum deformation is determined through hybrid algorithms,
Genetic Algorithms (GA) and Particle Swarm Optimization (PSO).
Prototype with intelligent optimization technique enables to hold
several variety of workpiece geometry which is suitable for
machining low of repetitive production in remote operation.
Abstract: This paper reports a case study on how a conceptual
and analytical thinking approach was used in Art and Design Department at Multimedia University (Malaysia) in addressing the
issues of one nation and its impact in the society through artworks. The art project was designed for students to increase the know-how
and develop creative thinking in design and communication. Goals of the design project were: (1) to develop creative thinking in design
and communication, (2) to increase student understanding on the
process of problem solving for design work, and (3) to use design
elements and principles to generate interest, attention and emotional responses. An exhibition entitled "One Nation" was showcased to
local and international viewers consisting of the general public, professionals, academics, artists and students. Findings indicate that the project supported several visual art standards, as well as
generated awareness in the society. This project may be of interest to
current and future art educators and others interested in the potential
of utilizing global issues as content for art, community and environment studies for the purpose of educational art.