Abstract: A new distance-adjusted approach is proposed in
which static square contours are defined around an estimated
symbol in a QAM constellation, which create regions that
correspond to fixed step sizes and weighting factors. As a
result, the equalizer tap adjustment consists of a linearly
weighted sum of adaptation criteria that is scaled by a variable
step size. This approach is the basis of two new algorithms: the
Variable step size Square Contour Algorithm (VSCA) and the
Variable step size Square Contour Decision-Directed
Algorithm (VSDA). The proposed schemes are compared with
existing blind equalization algorithms in the SCA family in
terms of convergence speed, constellation eye opening and
residual ISI suppression. Simulation results for 64-QAM
signaling over empirically derived microwave radio channels
confirm the efficacy of the proposed algorithms. An RTL
implementation of the blind adaptive equalizer based on the
proposed schemes is presented and the system is configured to
operate in VSCA error signal mode, for square QAM signals
up to 64-QAM.
Abstract: A 3D simulation study for an incompressible
slip flow around a spherical aerosol particle was performed.
The full Navier-Stokes equations were solved and the velocity
jump at the gas-particle interface was treated numerically by
imposition of the slip boundary condition. Analytical solution
to the Stokesian slip flow past a spherical particle was used as
a benchmark for code verification, and excellent agreement
was achieved. The Simulation results showed that in addition
to the Knudsen number, the Reynolds number affects the slip
correction factor. Thus, the Cunningham-based slip corrections
must be augmented by the inclusion of the effect of
Reynolds number for application to Lagrangian tracking of
fine particles. A new expression for the slip correction factor
as a function of both Knudsen number and Reynolds number
was developed.
Abstract: In this work, an organic compound 5,10,15,20-
Tetrakis(3,5-di-tertbutylphenyl)porphyrinatocopper(II) (TDTBPPCu)
is studied as an active material for thin film electronic devices. To
investigate the electrical properties of TDTBPPCu, junction of
TDTBPPCu with heavily doped n-Si and Al is fabricated.
TDTBPPCu film was sandwiched between Al and n-Si electrodes.
Various electrical parameters of TDTBPPCu are determined. The
current-voltage characteristics of the junction are nonlinear,
asymmetric and show rectification behavior, which gives the clue of
formation of depletion region. This behavior indicates the potential
of TDTBPPCu for electronics applications. The current-voltage and
capacitance-voltage techniques are used to find the different
electronic parameters.
Abstract: Land use change, if not based on proper scientific
investigation affects other physical, chemical, and biological
properties of soil and leading to increased destruction and erosion. It
was imperative to study the effects of changing rangelands to
farmlands on some Soil quality indexes. Undisturbed soil samples
were collected from the depths of 0-10 and 10-30 centimeter in
pasture with good vegetation cover(GP), pasture with medium
vegetation cover(MP), abandoned dry land farming(ADF) and
degraded dry land farming(DDF) land uses in Ghareh Aghaj
watershed of Isfahan province. The results revealed that organic
matter(OM), cation exchange capacity(CEC) and available
potassium(AK) decreasing in the depth of 0-10 centimeter were 66.6,
38.8 and 70 percent and in the depth of 10-30 centimeter were 58,
61.4 and 83.5 percent respectively in DDF comparison with GP.
Concerning to the results, it seems that land use change can decrease
soil quality and increase soil degradation and lead in undesirable
consequences.
Abstract: The bioassay-guided isolation and purification of an
ethyl acetate extract of Aspergillus terreus MC751 led to the
characterization of butyrolactone I as an antidiabetic and antioxidant.
The antidiabetic activity of butyrolactone I was evaluated by α-
glucosidase and α-amylase inhibition assays. Butyrolactone I
demonstrated significant concentration-dependent, mixed-type
inhibitory activity against yeast α-glucosidase with an IC50 of 54μM.
However, the compound exhibited less activity against rat intestinal
α-glucosidase and α-amylase. This is the first report on α-glucosidase
inhibitory activity of butyrolactone I. The antioxidative activity of
butyrolactone I was evaluated based on scavenging effects on 1,1-
diphenyl-2-picrylhydrazyl (DPPH) (IC50 =51 μM) and hydrogen
peroxide (IC50= 141 μM) radicals as well as a reducing power assay.
The results suggest that butyrolactone I is a promising antidiabetic as
well as antioxidant and should be considered for clinical trials.
Abstract: In this paper, collocation based cubic B-spline and
extended cubic uniform B-spline method are considered for
solving one-dimensional heat equation with a nonlocal initial
condition. Finite difference and θ-weighted scheme is used for
time and space discretization respectively. The stability of the
method is analyzed by the Von Neumann method. Accuracy of
the methods is illustrated with an example. The numerical results
are obtained and compared with the analytical solutions.
Abstract: In this paper, we consider the global exponential stability of the equilibrium point of Hopfield neural networks with delays and impulsive perturbation. Some new exponential stability criteria of the system are derived by using the Lyapunov functional method and the linear matrix inequality approach for estimating the upper bound of the derivative of Lyapunov functional. Finally, we illustrate two numerical examples showing the effectiveness of our theoretical results.
Abstract: Aspect Oriented Programming promises many
advantages at programming level by incorporating the cross cutting
concerns into separate units, called aspects. Join Points are
distinguishing features of Aspect Oriented Programming as they
define the points where core requirements and crosscutting concerns
are (inter)connected. Currently, there is a problem of multiple
aspects- composition at the same join point, which introduces the
issues like ordering and controlling of these superimposed aspects.
Dynamic strategies are required to handle these issues as early as
possible. State chart is an effective modeling tool to capture dynamic
behavior at high level design. This paper provides methodology to
formulate the strategies for multiple aspect composition at high level,
which helps to better implement these strategies at coding level. It
also highlights the need of designing shared join point at high level,
by providing the solutions of these issues using state chart diagrams
in UML 2.0. High level design representation of shared join points
also helps to implement the designed strategy in systematic way.
Abstract: In this paper, a new hybrid of genetic algorithm (GA)
and simulated annealing (SA), referred to as GSA, is presented. In
this algorithm, SA is incorporated into GA to escape from local
optima. The concept of hierarchical parallel GA is employed to
parallelize GSA for the optimization of multimodal functions. In
addition, multi-niche crowding is used to maintain the diversity in
the population of the parallel GSA (PGSA). The performance of the
proposed algorithms is evaluated against a standard set of multimodal
benchmark functions. The multi-niche crowding PGSA and normal
PGSA show some remarkable improvement in comparison with the
conventional parallel genetic algorithm and the breeder genetic
algorithm (BGA).
Abstract: Multimedia courseware has been accepted as a tool
that can support teaching and learning process. 'Li2D' courseware
was developed to assist student-s visualization on the topic of Loci in
Two Dimension. This paper describes an evaluation on the
effectiveness and usability of a 'Li2D' courseware. The quasi
experiment was used for the effectiveness evaluation. Usability
evaluation was accomplished based on four constructs of usability,
namely: efficiency, learnability, screen design and satisfaction. An
evaluation on the multimedia elements was also conducted. A total of
63 students of Form Two are involved in the study. The students are
divided into two groups: control and experimental. The experimental
group had to interact with 'Li2D' courseware as part of the learning
activities while the control group used the conventional learning
methods. The results indicate that the experimental group performed
better than the control group in understanding the Loci in Two
Dimensions topic. In terms of usability, the results showed that the
students agreed on the usability in multimedia elements in the 'Li2D'
courseware.
Abstract: With the drastically growth in optical communication
technology, a lossless, low-crosstalk and multifunction optical switch
is most desirable for large-scale photonic network. To realize such a
switch, we have introduced the new architecture of optical switch
that embedded many functions on single device. The asymmetrical
architecture of OXADM consists of 3 parts; selective port, add/drop
operation, and path routing. Selective port permits only the interest
wavelength pass through and acts as a filter. While add and drop
function can be implemented in second part of OXADM architecture.
The signals can then be re-routed to any output port or/and perform
an accumulation function which multiplex all signals onto single path
and then exit to any interest output port. This will be done by path
routing operation. The unique features offered by OXADM has
extended its application to Fiber to-the Home Technology (FTTH),
here the OXADM is used as a wavelength management element in
Optical Line Terminal (OLT). Each port is assigned specifically with
the operating wavelengths and with the dynamic routing management
to ensure no traffic combustion occurs in OLT.
Abstract: Martensitic stainless steels have been extensively used for their good corrosion resistance and better mechanical properties. Heat treatment was suggested as one of the most excellent ways to this regard; hence, it affects the microstructure, mechanical and corrosion properties of the steel. In the current research work the microstructural changes and corrosion behavior in an AISI 420A stainless steel exposed to temperatures in the 980-1035oC range were investigated. The heat treatment is carried out in vacuum furnace within the said temperature range. The quenching of the samples was carried out in oil, brine and water media. The formation and stability of passive film was studied by Open Circuit Potential, Potentiodynamic polarization and Electrochemical Scratch Tests. The Electrochemical Impedance Spectroscopy results simulated with Equivalent Electrical Circuit suggested bilayer structure of outer porous and inner barrier oxide films. The quantitative data showed thick inner barrier oxide film retarded electrochemical reactions. Micrographs of the quenched samples showed sigma and chromium carbide phases which prove the corrosion resistance of steel alloy.
Abstract: The threshold voltage and capacitance voltage characteristics of ultra-thin Silicon-on-Insulator MOSFET are greatly influenced by the thickness and doping concentration of the silicon film. In this work, the capacitance voltage characteristics and threshold voltage of the device have been analyzed with quantum mechanical effects using the Self-Consistent model. Reduction of channel thickness and adding doping impurities cause an increase in the threshold voltage. Moreover, the temperature effects cause a significant amount of threshold voltage shift. The temperature dependence of threshold voltage has also been observed with Self- Consistent approach which are well supported from experimental performance of practical devices.
Abstract: SoftBoost is a recently presented boosting algorithm,
which trades off the size of achieved classification margin and
generalization performance. This paper presents a performance
evaluation of SoftBoost algorithm on the generic object recognition
problem. An appearance-based generic object recognition
model is used. The evaluation experiments are performed using
a difficult object recognition benchmark. An assessment with respect
to different degrees of label noise as well as a comparison to
the well known AdaBoost algorithm is performed. The obtained
results reveal that SoftBoost is encouraged to be used in cases
when the training data is known to have a high degree of noise.
Otherwise, using Adaboost can achieve better performance.
Abstract: This paper investigates the issue of building decision
trees from data with imprecise class values where imprecision is
encoded in the form of possibility distributions. The Information
Affinity similarity measure is introduced into the well-known gain
ratio criterion in order to assess the homogeneity of a set of
possibility distributions representing instances-s classes belonging to
a given training partition. For the experimental study, we proposed an
information affinity based performance criterion which we have used
in order to show the performance of the approach on well-known
benchmarks.
Abstract: The present paper presents a finite element model and
analysis for the interaction between a piezoresistive tactile sensor and
biological tissues. The tactile sensor is proposed for use in minimally
invasive surgery to deliver tactile information of biological tissues to
surgeons. The proposed sensor measures the relative hardness of soft
contact objects as well as the contact force. Silicone rubbers were
used as the phantom of biological tissues. Finite element analysis of
the silicone rubbers and the mechanical structure of the sensor were
performed using COMSOL Multiphysics (v3.4) environment. The
simulation results verify the capability of the sensor to be used to
differentiate between different kinds of silicone rubber materials.
Abstract: The group mutual exclusion (GME) problem is an
interesting generalization of the mutual exclusion problem. In the
group mutual exclusion, multiple processes can enter a critical
section simultaneously if they belong to the same group. In the
extended group mutual exclusion, each process is a member of
multiple groups at the same time. As a result, after the process by
selecting a group enter critical section, other processes can select the
same group with its belonging group and can enter critical section at
the moment, so that it avoids their unnecessary blocking. This paper
presents a quorum-based distributed algorithm for the extended
group mutual exclusion problem. The message complexity of our
algorithm is O(4Q ) in the best case and O(5Q) in the worst case,
where Q is a quorum size.
Abstract: The aim of this paper is to present a methodology in
three steps to forecast supply chain demand. In first step, various data
mining techniques are applied in order to prepare data for entering
into forecasting models. In second step, the modeling step, an
artificial neural network and support vector machine is presented
after defining Mean Absolute Percentage Error index for measuring
error. The structure of artificial neural network is selected based on
previous researchers' results and in this article the accuracy of
network is increased by using sensitivity analysis. The best forecast
for classical forecasting methods (Moving Average, Exponential
Smoothing, and Exponential Smoothing with Trend) is resulted based
on prepared data and this forecast is compared with result of support
vector machine and proposed artificial neural network. The results
show that artificial neural network can forecast more precisely in
comparison with other methods. Finally, forecasting methods'
stability is analyzed by using raw data and even the effectiveness of
clustering analysis is measured.
Abstract: Today with the rapid growth of telecommunications equipment, electronic and developing more and more networks of power, influence of electromagnetic waves on one another has become hot topic discussions. So in this article, this issue and appropriate mechanisms for EMC operations have been presented. First, impact of high voltage lines on the surrounding environment especially on the control room has been investigated, then to reduce electromagnetic radiation, various methods of shielding are provided and shielding effectiveness of them has been compared. It should be expressed that simulations have been done by the finite element method (FEM).
Abstract: The Kinetics formation of labile Complex
Ag (I) tetra (p-carboxyphenyl) porphyrin, was investigated at 25oC
and I=0.1M (NaNO3). By spectrophotometric titration, the
composition ratio of the complex was established to be 2:1
(Ag : H2TCPP). The equilibrium constant, K, was found to be
log 10-6.53. Binding of the first Ag (I) was found to be rate
determining step with rate constant, k1= 4.67×102 . A plausible
mechanism is discussed. We discus theoretically why Ag(I)2TCPP is
unstable.