Abstract: Climate change has profound consequences for the agriculture of south-eastern Australia and its climate-induced water shortage in the Murray-Darling Basin. Post Keynesian Economics (PKE) macro-dynamics, along with Kaleckian investment and growth theory, are used to develop an ecological-economic system dynamics model of this complex nonlinear river basin system. The Murray- Darling Basin Simulation Model (MDB-SM) uses the principles of PKE to incorporate the fundamental uncertainty of economic behaviors of farmers regarding the investments they make and the climate change they face, particularly as regards water ecosystem services. MDB-SM provides a framework for macroeconomic policies, especially for long-term fiscal policy and for policy directed at the sustainability of agricultural water, as measured by socio-economic well-being considerations, which include sustainable consumption and investment in the river basin. The model can also reproduce other ecological and economic aspects and, for certain parameters and initial values, exhibit endogenous business cycles and ecological sustainability with realistic characteristics. Most importantly, MDBSM provides a platform for the analysis of alternative economic policy scenarios. These results reveal the importance of understanding water ecosystem adaptation under climate change by integrating a PKE macroeconomic analytical framework with the system dynamics modelling approach. Once parameterised and supplied with historical initial values, MDB-SM should prove to be a practical tool to provide alternative long-term policy simulations of agricultural water and socio-economic well-being.
Abstract: The article deals with experimental and numerical
investigation of axi-symmetric subsonic air to air ejector with
diffuser adapted for boundary layer suction. The diffuser, which is
placed behind the mixing chamber of the ejector, has high divergence
angle and therefore low efficiency. To increase the efficiency, the
diffuser is equipped with slot enabling boundary layer suction. The
effect of boundary layer suction on flow in ejector, static pressure
distribution on the mixing chamber wall and characteristic were
measured and studied numerically. Both diffuser and ejector
efficiency were evaluated. The diffuser efficiency was increased,
however, the efficiency of ejector itself remained low.
Abstract: The daily increase of organic waste materials resulting
from different activities in the country is one of the main factors for
the pollution of environment. Today, with regard to the low level of
the output of using traditional methods, the high cost of disposal
waste materials and environmental pollutions, the use of modern
methods such as anaerobic digestion for the production of biogas has
been prevailing. The collected biogas from the process of anaerobic
digestion, as a renewable energy source similar to natural gas but
with a less methane and heating value is usable. Today, with the help
of technologies of filtration and proper preparation, access to biogas
with features fully similar to natural gas has become possible. At
present biogas is one of the main sources of supplying electrical and
thermal energy and also an appropriate option to be used in four
stroke engine, diesel engine, sterling engine, gas turbine, gas micro
turbine and fuel cell to produce electricity. The use of biogas for
different reasons which returns to socio-economic and environmental
advantages has been noticed in CHP for the production of energy in
the world. The production of biogas from the technology of anaerobic
digestion and its application in CHP power plants in Iran can not only
supply part of the energy demands in the country, but it can
materialize moving in line with the sustainable development. In this
article, the necessity of the development of CHP plants with biogas
fuels in the country will be dealt based on studies performed from the
economic, environmental and social aspects. Also to prove the
importance of the establishment of these kinds of power plants from
the economic point of view, necessary calculations has been done as
a case study for a CHP power plant with a biogas fuel.
Abstract: This research work proposed a study of fruit bruise detection by means of a biospeckle method, selecting the papaya fruit (Carica papaya) as testing body. Papaya is recognized as a fruit of outstanding nutritional qualities, showing high vitamin A content, calcium, carbohydrates, exhibiting high popularity all over the world, considering consumption and acceptability. The commercialization of papaya faces special problems which are associated to bruise generation during harvesting, packing and transportation. Papaya is classified as climacteric fruit, permitting to be harvested before the maturation is completed. However, by one side bruise generation is partially controlled once the fruit flesh exhibits high mechanical firmness. By the other side, mechanical loads can set a future bruise at that maturation stage, when it can not be detected yet by conventional methods. Mechanical damages of fruit skin leave an entrance door to microorganisms and pathogens, which will cause severe losses of quality attributes. Traditional techniques of fruit quality inspection include total soluble solids determination, mechanical firmness tests, visual inspections, which would hardly meet required conditions for a fully automated process. However, the pertinent literature reveals a new method named biospeckle which is based on the laser reflectance and interference phenomenon. The laser biospeckle or dynamic speckle is quantified by means of the Moment of Inertia, named after its mechanical counterpart due to similarity between the defining formulae. Biospeckle techniques are able to quantify biological activities of living tissues, which has been applied to seed viability analysis, vegetable senescence and similar topics. Since the biospeckle techniques can monitor tissue physiology, it could also detect changes in the fruit caused by mechanical damages. The proposed technique holds non invasive character, being able to generate numerical results consistent with an adequate automation. The experimental tests associated to this research work included the selection of papaya fruit at different maturation stages which were submitted to artificial mechanical bruising tests. Damages were visually compared with the frequency maps yielded by the biospeckle technique. Results were considered in close agreement.
Abstract: K-Means (KM) is considered one of the major
algorithms widely used in clustering. However, it still has some
problems, and one of them is in its initialization step where it is
normally done randomly. Another problem for KM is that it
converges to local minima. Genetic algorithms are one of the
evolutionary algorithms inspired from nature and utilized in the field
of clustering. In this paper, we propose two algorithms to solve the
initialization problem, Genetic Algorithm Initializes KM (GAIK) and
KM Initializes Genetic Algorithm (KIGA). To show the effectiveness
and efficiency of our algorithms, a comparative study was done
among GAIK, KIGA, Genetic-based Clustering Algorithm (GCA),
and FCM [19].
Abstract: The paper applies a discourse analytical approach to investigate important concepts influencing the infrastructure planning process in the region of Scania in southern Sweden. Two discourses, one concerning regional development and one concerning sustainability are identified, discussed and contrasted. It is argued that the perceptions of problems and their suggested solutions related to transportation are based on specific ideas, in turn dependent on the importance given to certain concepts, such as regional enlargement, Scania as a transit region, the national environmental quality goals and regional attractiveness. These concepts, their underlying meaning structures and their relevance for the infrastructure planning process are analyzed. The handling of conflicting interests in the planning process, and the possible implications this may have is also discussed. The results indicate that the regional development discourse is dominant and although the solutions to the problems caused by transport are framed in similar ways in the two discourses a harmonization between conflicting goals is proving difficult to achieve.
Abstract: This paper attempts to highlight the significant role of
knowledge management practices (KMP) and competencies in
improving the performance and efficiency of public sector
organizations. It appears that public sector organizations in
developing countries have not received much attention in the
research literature of knowledge management and competencies.
Therefore, this paper seeks to explore the role of KMP and
competencies in achieving superior performance among public sector
organizations in Malaysia in the broader perspective. Survey
questionnaires were distributed to all Administrative and Diplomatic
Officers (ADS) from 28 ministries located in Putrajaya, Malaysia.
This paper also examines preliminary empirical results on the
relationship between support for knowledge management practices,
competencies, and orientation in Malaysia-s public organizations.
This paper supports the notion that the practices of knowledge
management at the organizational level are a prerequisite for
successful organizational performance. In conclusion, the results not
only have the potential to contribute theoretically to both
management strategy and knowledge management field literature but
also to the area of organizational performance.
Abstract: Geometric design is an important part of planning
process design for physical highway to fill up basic function of roads,
to give good traffic service. It is found that most of the road safety
problems occur at the horizontal curves and complex-compound
curves. In this paper, review on Sagarinn-Myinsain Portion of Nay
Pyi Taw - Mandalay highway has been conducted in aspect of
geometric design induced road safety condition. Horizontal
alignment of geometric features and curve details are reviewed based
on (AASHTO) standard and revised by Autodesk Land Desktop
Software. Moreover, 85th Percentile Operation Speeds (V85) with
driver confidence on horizontal curves is evaluated in order to obtain
the range of highway safety factor (FS). The length of the selected
highway portion is 13.65 miles and 8 lanes. The results of this study
can be used to investigate the possible hazardous locations in
advance and to revise how design radius and super elevation should
be for better road safety performance for the selected portion.
Moreover, the relationship between highway safety and highway
geometry characteristics can also be known.
Abstract: We report in this paper the procedure of a system of
automatic speech recognition based on techniques of the dynamic
programming. The technique of temporal retiming is a technique
used to synchronize between two forms to compare. We will see how
this technique is adapted to the field of the automatic speech
recognition. We will expose, in a first place, the theory of the
function of retiming which is used to compare and to adjust an
unknown form with a whole of forms of reference constituting the
vocabulary of the application. Then we will give, in the second place,
the various algorithms necessary to their implementation on machine.
The algorithms which we will present were tested on part of the
corpus of words in Arab language Arabdic-10 [4] and gave whole
satisfaction. These algorithms are effective insofar as we apply them
to the small ones or average vocabularies.
Abstract: Application of flexible structures has been
significantly, increased in industry and aerospace missions due to
their contributions and unique advantages over the rigid counterparts.
In this paper, vibration analysis of a flexible structure i.e., automobile
wiper blade is investigated and controlled. The wiper generates
unwanted noise and vibration during the wiping the rain and other
particles on windshield which may cause annoying noise in different
ranges of frequency. A two dimensional analytical modeled wiper
blade whose model accuracy is verified by numerical studies in
literature is considered in this study. Particle swarm optimization
(PSO) is employed in alliance with input shaping (IS) technique in
order to control or to attenuate the amplitude level of unwanted
noise/vibration of the wiper blade.
Abstract: The performance of sensor-less controlled induction
motor drive depends on the accuracy of the estimated speed.
Conventional estimation techniques being mathematically complex
require more execution time resulting in poor dynamic response. The
nonlinear mapping capability and powerful learning algorithms of
neural network provides a promising alternative for on-line speed
estimation. The on-line speed estimator requires the NN model to be
accurate, simpler in design, structurally compact and computationally
less complex to ensure faster execution and effective control in real
time implementation. This in turn to a large extent depends on the
type of Neural Architecture. This paper investigates three types of
neural architectures for on-line speed estimation and their
performance is compared in terms of accuracy, structural
compactness, computational complexity and execution time. The
suitable neural architecture for on-line speed estimation is identified
and the promising results obtained are presented.
Abstract: This study was aimed to determine seasonal variations
of leaf nutrient concentrations to define nutrient needs related to
growing period and to compare irrigation programs in terms of
nutrient uptake. In this study,'Starkrimson Delicious' variety grafted
onto seedling rootstock was used during 2009-2010 growing seasons.
The study was conducted at E─ƒirdir Fruit Growing Research Station.
Leaf samples were taken in five different sample seasons (May, June,
July, August and September). Four different pan coefficients (0.50,
0.75, 1.0, 1.25) were applied during drip irrigation treatments in 7
days irrigation interval. Leaf K, Mg, Ca, P, Fe, Zn, Mn and Cu
concentrations were determined.
The results showed that among the seasonal changes, the highest
concentrations of K, Mg, P and Mn in leaves were recorded in May,
followed by a decrease in the other months, while in contrast Ca and
Fe showed the lowest concentration in May.
Results of the study demonstrate that among irrigation programs K
and Cu concentration in plants was significantly influenced. Cu
concentrations decreased with seasonal variations and different
irrigation programs. Thus, nutrient needs of 'Starkrimson Delicious'apple trees at different growth stages should be taken into
consideration before making effective fertilization program.
Abstract: Fractal analyses of successive event of explosion
earthquake and harmonic tremor recorded at Semeru volcano were
carried out to investigate the dynamical system regarding to their
generating mechanism. The explosive eruptions accompanied by
explosion earthquakes and following volcanic tremor which are
generated by continuous emission of volcanic ash. The fractal
dimension of successive event of explosion and harmonic tremor was
estimated by Critical Exponent Method (CEM). It was found that the
method yield a higher fractal dimension of explosion earthquakes and
gradually decrease during the occurrence of harmonic tremor, and can
be considerably as correlated complexity of the source mechanism
from the variance of fractal dimension.
Abstract: Monitoring and control of cane sugar crystallization
processes depend on the stability of the supersaturation (σ ) state.
The most widely used information to represent σ is the electrical
conductivity κ of the solutions. Nevertheless, previous studies point
out the shortcomings of this approach: κ may be regarded as
inappropriate to guarantee an accurate estimation of σ in impure
solutions. To improve the process control efficiency, additional
information is necessary. The mass of crystals in the solution ( c m )
and the solubility (mass ratio of sugar to water / s w m m ) are relevant
to complete information. Indeed, c m inherently contains information
about the mass balance and / s w m m contains information about the
supersaturation state of the solution. The main problem is that c m
and / s w m m are not available on-line. In this paper, a model based
soft-sensor is presented for a final crystallization stage (C sugar).
Simulation results obtained on industrial data show the reliability of
this approach, c m and the crystal content ( cc ) being estimated with
a sufficient accuracy for achieving on-line monitoring in industry
Abstract: The next generation wireless systems, especially the
cognitive radio networks aim at utilizing network resources more
efficiently. They share a wide range of available spectrum in an
opportunistic manner. In this paper, we propose a quality
management model for short-term sub-lease of unutilized spectrum
bands to different service providers. We built our model on
competitive secondary market architecture. To establish the
necessary conditions for convergent behavior, we utilize techniques
from game theory. Our proposed model is based on potential game
approach that is suitable for systems with dynamic decision making.
The Nash equilibrium point tells the spectrum holders the ideal price
values where profit is maximized at the highest level of customer
satisfaction. Our numerical results show that the price decisions of
the network providers depend on the price and QoS of their own
bands as well as the prices and QoS levels of their opponents- bands.
Abstract: Investigation of soil properties like Cation Exchange
Capacity (CEC) plays important roles in study of environmental
reaserches as the spatial and temporal variability of this property
have been led to development of indirect methods in estimation of
this soil characteristic. Pedotransfer functions (PTFs) provide an
alternative by estimating soil parameters from more readily available
soil data. 70 soil samples were collected from different horizons of
15 soil profiles located in the Ziaran region, Qazvin province, Iran.
Then, multivariate regression and neural network model (feedforward
back propagation network) were employed to develop a
pedotransfer function for predicting soil parameter using easily
measurable characteristics of clay and organic carbon. The
performance of the multivariate regression and neural network model
was evaluated using a test data set. In order to evaluate the models,
root mean square error (RMSE) was used. The value of RMSE and
R2 derived by ANN model for CEC were 0.47 and 0.94 respectively,
while these parameters for multivariate regression model were 0.65
and 0.88 respectively. Results showed that artificial neural network
with seven neurons in hidden layer had better performance in
predicting soil cation exchange capacity than multivariate regression.
Abstract: Determining reasonable fees is the main objective of designing the cost estimation and payment systems for consultant contracts. However, project clients utilize different cost estimation and payment systems because of their varying views on the reasonableness of consultant fees. This study reviews the cost estimation and payment systems of consultant contracts for five countries, including the US (Washington State Department of Transportation), Japan (Ministry of Land, Infrastructure, Transport and Tourism), China (Engineering Design Charging Standard) and UK (Her Majesty's Treasure). Specifically, this work investigates the budgeting process, contractor selection method, contractual price negotiation process, cost review, and cost-control concept of the systems used in these countries. The main finding indicates that that project client-s view on whether the fee is high will affect the way he controls it. In the US, the fee is commonly considered to be high. As a result, stringent auditing system (low flexibility given to the consultant) is then applied. In the UK, the fee is viewed to be low by comparing it to the total life-cycle project cost. Thus, a system that has high flexibility in budgeting and cost reviewing is given to the consultant. In terms of the flexibility allowed for the consultant, the systems applied in Japan and China fall between those of the US and UK. Both the US and UK systems are helpful in determining a reasonable fee. However, in the US system, rigid auditing standards must be established and additional cost-audit manpower is required. In the UK system, sufficient historical cost data should be needed to evaluate the reasonableness of the consultant-s proposed fee
Abstract: Materials added to the matrix help improving operating properties of a composite. This experimental study has targeted to investigate this aim where Silicon Oxide particles were added to glass fibre and epoxy resin at an amount of 15% to the main material to obtain a sort of new composite material. Erosive wear behavior of epoxy-resin dipped composite materials reinforced with glass fibre and Silicon Oxide under three different impingement angles (30°, 60° and 90°), three different impact velocities (23, 34 and 53 m/s), two different angular Aluminum abrasive particle sizes (approximately 200 and 400 μm) and the fibre orientation of 45° (45/-45) were investigated. In the test results, erosion rates were obtained as functions of impingement angles, impact velocities, particle sizes and fibre orientation. Moreover, materials with addition of Silicon Oxide filler material exhibited lower wear as compared to neat materials with no added filler material. In addition, SEM views showing worn out surfaces of the test specimens were scrutinized.
Abstract: In order to study the effect of phosphate solubilization
microorganisms (PSM) and plant growth promoting rhizobacteria
(PGPR) on yield and yield components of corn Zea mays (L. cv.
SC604) an experiment was conducted at research farm of Sari
Agricultural Sciences and Natural Resources University, Iran during
2007. Experiment laid out as split plot based on randomized
complete block design with three replications. Three levels of
manures (consisted of 20 Mg.ha-1 farmyard manure, 15 Mg.ha-1 green
manure and check or without any manures) as main plots and eight
levels of biofertilizers (consisted of 1-NPK or conventional fertilizer
application; 2-NPK+PSM+PGPR; 3 NP50%K+PSM+PGPR; 4-
N50%PK+PSM +PGPR; 5-N50%P50%K+PSM+ PGPR; 6-PK+PGPR; 7-
NK+PSM and 8-PSM+PGPR) as sub plots were treatments. Results
showed that farmyard manure application increased row number, ear
weight, grain number per ear, grain yield, biological yield and
harvest index compared to check. Furthermore, using of PSM and
PGPR in addition to conventional fertilizer applications (NPK) could
improve ear weight, row number and grain number per row and
ultimately increased grain yield in green manure and check plots.
According to results in all fertilizer treatments application of PSM
and PGPR together could reduce P application by 50% without any
significant reduction of grain yield. However, this treatment could
not compensate 50% reduction of N application.
Abstract: The abnormal increase in the number of applications available for download in Android markets is a good indication that they are being reused. However, little is known about their real reusability potential. A considerable amount of these applications is reported as having a poor quality or being malicious. Hence, in this paper, an approach to measure the reusability potential of classes in Android applications is proposed. The approach is not meant specifically for this particular type of applications. Rather, it is intended for Object-Oriented (OO) software systems in general and aims also to provide means to discard the classes of low quality and defect prone applications from being reused directly through inheritance and instantiation. An empirical investigation is conducted to measure and rank the reusability potential of the classes of randomly selected Android applications. The results obtained are thoroughly analyzed in order to understand the extent of this potential and the factors influencing it.