Abstract: In Korea, the technology of a load fo nuclear power plant has been being developed.
automatic controller which is able to control temperature and axial power distribution was developed. identification algorithm and a model predictive contact former transforms the nuclear reactor status into
numerically. And the latter uses them and ge
manipulated values such as two kinds of control ro
this automatic controller, the performance of a coperation was evaluated. As a result, the automatic generated model parameters of a nuclear react to nuclear reactor average temperature and axial power the desired targets during a daily load follow.
Abstract: The previous study of new metal gasket that contact
width and contact stress an important design parameter for optimizing
metal gasket performance. The optimum design based on an elastic
and plastic contact stress was founded. However, the influence of
flange surface roughness had not been investigated thoroughly. The
flange has many kinds of surface roughness. In this study, we
conducted a gasket model include a flange surface roughness effect. A
finite element method was employed to develop simulation solution. A
uniform quadratic mesh used for meshing the gasket material and a
gradually quadrilateral mesh used for meshing the flange. The gasket
model was simulated by using two simulation stages which is forming
and tightening simulation. A simulation result shows that a smoother
of surface roughness has higher slope for force per unit length. This
mean a squeezed against between flange and gasket will be strong. The
slope of force per unit length for gasket 400-MPa mode was higher
than the gasket 0-MPa mode.
Abstract: This work considered the thermodynamic feasibility
of scrubbing volatile organic compounds into biodiesel in view of
designing a gas treatment process with this absorbent. A detailed
vapour – liquid equilibrium investigation was performed using the
original UNIFAC group contribution method. The four biodiesels
studied in this work are methyl oleate, methyl palmitate, methyl
linolenate and ethyl stearate. The original UNIFAC procedure was
used to estimate the infinite dilution activity coefficients of 13
selected volatile organic compounds in the biodiesels. The
calculations were done at the VOC mole fraction of 9.213x10-8. Ethyl
stearate gave the most favourable phase equilibrium. A close
agreement was found between the infinite dilution activity coefficient
of toluene found in this work and those reported in literature.
Thermodynamic models can efficiently be used to calculate vast
amount of phase equilibrium behaviour using limited number of
experimental data.
Abstract: IEEE has recently incorporated CCMP protocol to provide robust security to IEEE 802.11 wireless LANs. It is found that CCMP has been designed with a weak nonce construction and transmission mechanism, which leads to the exposure of initial counter value. This weak construction of nonce renders the protocol vulnerable to attacks by intruders. This paper presents how the initial counter can be pre-computed by the intruder. This vulnerability of counter block value leads to pre-computation attack on the counter mode encryption of CCMP. The failure of the counter mode will result in the collapse of the whole security mechanism of 802.11 WLAN.
Abstract: Recent years have seen a growing trend towards the
integration of multiple information sources to support large-scale
prediction of protein-protein interaction (PPI) networks in model
organisms. Despite advances in computational approaches, the
combination of multiple “omic" datasets representing the same type
of data, e.g. different gene expression datasets, has not been
rigorously studied. Furthermore, there is a need to further investigate
the inference capability of powerful approaches, such as fullyconnected
Bayesian networks, in the context of the prediction of PPI
networks. This paper addresses these limitations by proposing a
Bayesian approach to integrate multiple datasets, some of which
encode the same type of “omic" data to support the identification of
PPI networks. The case study reported involved the combination of
three gene expression datasets relevant to human heart failure (HF).
In comparison with two traditional methods, Naive Bayesian and
maximum likelihood ratio approaches, the proposed technique can
accurately identify known PPI and can be applied to infer potentially
novel interactions.
Abstract: Based on a non-linear single track model which
describes the dynamics of vehicle, an optimal path planning strategy
is developed. Real time optimization is used to generate reference
control values to allow leading the vehicle alongside a calculated lane
which is optimal for different objectives such as energy consumption,
run time, safety or comfort characteristics. Strict mathematic
formulation of the autonomous driving allows taking decision on
undefined situation such as lane change or obstacle avoidance. Based
on position of the vehicle, lane situation and obstacle position, the
optimization problem is reformulated in real-time to avoid the
obstacle and any car crash.
Abstract: This paper presents a several diagnostic methods designed to electrical machinesespecially for permanent magnets (PM) machines. Those machines are commonly used in small wind and water systems and vehicles drives.Thosemethodsare preferred by the author in periodic diagnostic of electrical machines. The special attentionshould be paid to diagnostic method of turn-to-turn insulation and vibrations. Both of those methodswere createdinInstitute of Electrical Drives and MachinesKomel. The vibration diagnostic method is the main thesis of author’s doctoral dissertation. This is method of determination the technical condition of PM electrical machine basing on its own signals is the subject of patent application No P.405669. Specific structural properties of machines excited by permanent magnets are used in this method - electromotive force (EMF) generated due to vibrations. There was analysed number of publications which describe vibration diagnostic methods and tests of electrical machines with permanent magnets and there was no method found to determine the technical condition of such machine basing on their own signals.
Abstract: This paper presents an algorithm which
combining ant colony optimization in the dynamic
programming for solving a dynamic facility layout problem.
The problem is separated into 2 phases, static and dynamic
phase. In static phase, ant colony optimization is used to find
the best ranked of layouts for each period. Then the dynamic
programming (DP) procedure is performed in the dynamic
phase to evaluate the layout set during multi-period planning
horizon. The proposed algorithm is tested over many
problems with size ranging from 9 to 49 departments, 2 and 4
periods. The experimental results show that the proposed
method is an alternative way for the plant layout designer to
determine the layouts during multi-period planning horizon.
Abstract: Photovoltaic power generation forecasting is an
important task in renewable energy power system planning and
operating. This paper explores the application of neural networks
(NN) to study the design of photovoltaic power generation
forecasting systems for one week ahead using weather databases
include the global irradiance, and temperature of Ghardaia city
(south of Algeria) using a data acquisition system. Simulations were
run and the results are discussed showing that neural networks
Technique is capable to decrease the photovoltaic power generation
forecasting error.
Abstract: There are three distinct stages in the evolution of
economic thought, namely:
1. in the first stage, the major concern was to accelerate
economic growth with increased availability of material
goods, especially in developing economies with very low
living standards, because poverty eradication meant faster
economic growth.
2. in the second stage, economists made distinction between
growth and development. Development was seen as going
beyond economic growth, and bringing certain changes in
the structure of the economy with more equitable
distribution of the benefits of growth, with the growth
coming automatic and sustained.
3. the third stage is now reached. Our concern is now with
“sustainable development", that is, development not only
for the present but also of the future.
Thus the focus changed from “sustained growth" to “sustained
development". Sustained development brings to the fore the long
term relationship between the ecology and economic development.
Since the creation of UNEP in 1972 it has worked for
development without destruction for environmentally sound and
sustained development. It was realised that the environment cannot
be viewed in a vaccum, it is not separate from development, nor is it
competing. It suggested for the integration of the environment with
development whereby ecological factors enter development planning,
socio-economic policies, cost-benefit analysis, trade, technology
transfer, waste management, educational and other specific areas.
Industrialisation has contributed to the growth of economy of
several countries. It has improved the standards of living of its people
and provided benefits to the society. It has also created in the process
great environmental problems like climate change, forest destruction
and denudation, soil erosion and desertification etc.
On the other hand, industry has provided jobs and improved the
prospects of wealth for the industrialists. The working class
communities had to simply put up with the high levels of pollution in
order to keep up their jobs and also to save their income.
There are many roots of the environmental problem. They may be
political, economic, cultural and technological conditions of the
modern society. The experts concede that industrial growth lies
somewhere close to the heart of the matter. Therefore, the objective
of this paper is not to document all roots of an environmental crisis
but rather to discuss the effects of industrial growth and
development.
We have come to the conclusion that although public intervention
is often unnecessary to ensure that perfectly competitive markets will
function in society-s best interests, such intervention is necessary
when firms or consumers pollute.
Abstract: The multidelays linear control systems described by
difference differential equations are often studied in modern control
theory. In this paper, the delay-independent stabilization algebraic
criteria and the theorem of delay-independent stabilization for linear
systems with multiple time-delays are established by using the
Lyapunov functional and the Riccati algebra matrix equation in the
matrix theory. An illustrative example and the simulation result, show
that the approach to linear systems with multiple time-delays is
effective.
Abstract: The spatial variation in plant species associated with intercropping is intended to reduce resource competition between species and increase yield potential. A field experiment was carried out on corn (Zea mays L.) and soybean (Glycine max L.) intercropping in a replacement series experiment with weed contamination consist of: weed free, infestation of redroot pigweed, infestation of jimsonweed and simultaneous infestation of redroot pigweed and jimsonweed in Karaj, Iran during 2007 growing season. The experimental design was a randomized complete block in factorial experiment with replicated thrice. Significant (P≤0.05) differences were observed in yield in intercropping. Corn yield was higher in intercropping, but soybean yield was significantly reduced by corn when intercropped. However, total productivity and land use efficiency were high under the intercropping system even in contamination of either species of weeds. Aggressivity of corn relative to soybean revealed the greater competitive ability of corn than soybean. Land equivalent ratio (LER) more than 1 in all treatments attributed to intercropping advantages and was highest in 50: 50 (corn/soybean) in weed free. These findings suggest that intercropping corn and soybean increase total productivity per unit area and improve land use efficiency. Considering the experimental findings, corn-soybean intercropping (50:50) may be recommended for yield advantage, more efficient utilization of resources, and weed suppression as a biological control.
Abstract: Autism Spectrum Disorder (ASD) is a pervasive developmental disorder which affects individuals with varying degrees of impairment. Currently, there has been ample research done in serious game for autism children. Although serious games are traditionally associated with software developments, developing them in the autism field involves studying the associated technology and paying attention to aspects related to interaction with the game. Serious Games for autism cover matters related to education, therapy for communication, psychomotor treatment and social behavior enhancement. In this paper, a systematic review sets out the lines of development and research currently being conducted into serious games which pursue some form of benefit in the field of autism. This paper includes a literature review of relevant serious game developments since in year 2007 and examines new trends.
Abstract: Most Decision Support Systems (DSS) for waste
management (WM) constructed are not widely marketed and lack
practical applications. This is due to the number of variables and
complexity of the mathematical models which include the
assumptions and constraints required in decision making. The
approach made by many researchers in DSS modelling is to isolate a
few key factors that have a significant influence to the DSS. This
segmented approach does not provide a thorough understanding of
the complex relationships of the many elements involved. The
various elements in constructing the DSS must be integrated and
optimized in order to produce a viable model that is marketable and
has practical application. The DSS model used in assisting decision
makers should be integrated with GIS, able to give robust prediction
despite the inherent uncertainties of waste generation and the plethora
of waste characteristics, and gives optimal allocation of waste stream
for recycling, incineration, landfill and composting.
Abstract: The correct design of the regulators structure requires complete prediction of the ultimate dimensions of the scour hole profile formed downstream the solid apron. The study of scour downstream regulator is studied either on solid aprons by means of velocity distribution or on movable bed by studying the topography of the scour hole formed in the downstream. In this paper, a new technique was developed to study the scour hole downstream regulators on movable beds. The study was divided into two categories; the first is to find out the sum of the lengths of rigid apron behind the gates in addition to the length of scour hole formed downstream, while the second is to find the minimum length of rigid apron behind the gates to prevent erosion downstream it. The study covers free and submerged hydraulic jump conditions in both symmetrical and asymmetrical under-gated regulations. From the comparison between the studied categories, we found that the minimum length of rigid apron to prevent scour (Ls) is greater than the sum of the lengths of rigid apron and that of scour hole formed behind it (L+Xs). On the other hand, the scour hole dimensions in case of submerged hydraulic jump is always greater than free one, also the scour hole dimensions in asymmetrical operation is greater than symmetrical one.
Abstract: In this paper we propose a computational model for the representation and processing of morpho-phonological phenomena in a natural language, like Modern Greek. We aim at a unified treatment of inflection, compounding, and word-internal phonological changes, in a model that is used for both analysis and generation. After discussing certain difficulties cuase by well-known finitestate approaches, such as Koskenniemi-s two-level model [7] when applied to a computational treatment of compounding, we argue that a morphology-based model provides a more adequate account of word-internal phenomena. Contrary to the finite state approaches that cannot handle hierarchical word constituency in a satisfactory way, we propose a unification-based word grammar, as the nucleus of our strategy, which takes into consideration word representations that are based on affixation and [stem stem] or [stem word] compounds. In our formalism, feature-passing operations are formulated with the use of the unification device, and phonological rules modeling the correspondence between lexical and surface forms apply at morpheme boundaries. In the paper, examples from Modern Greek illustrate our approach. Morpheme structures, stress, and morphologically conditioned phoneme changes are analyzed and generated in a principled way.
Abstract: Mathematical programming has been applied to various
problems. For many actual problems, the assumption that the parameters
involved are deterministic known data is often unjustified. In
such cases, these data contain uncertainty and are thus represented
as random variables, since they represent information about the
future. Decision-making under uncertainty involves potential risk.
Stochastic programming is a commonly used method for optimization
under uncertainty. A stochastic programming problem with recourse
is referred to as a two-stage stochastic problem. In this study, we
consider a stochastic programming problem with simple integer
recourse in which the value of the recourse variable is restricted to a
multiple of a nonnegative integer. The algorithm of a dynamic slope
scaling procedure for solving this problem is developed by using a
property of the expected recourse function. Numerical experiments
demonstrate that the proposed algorithm is quite efficient. The
stochastic programming model defined in this paper is quite useful
for a variety of design and operational problems.
Abstract: Grid computing provides an effective infrastructure for massive computation among flexible and dynamic collection of individual system for resource discovery. The major challenge for grid computing is to prevent breaches and secure the data from trespassers. To overcome such conflicts a semantic approach can be designed which will filter the access requests of peers by checking the resource description specifying the data and the metadata as factual statements. Between every node in the grid a semantic firewall as a middleware will be present The intruder will be required to present an application specifying there needs to the firewall and hence accordingly the system will grant or deny the application request.
Abstract: Identifying the nature of protein-nanoparticle
interactions and favored binding sites is an important issue in
functional characterization of biomolecules and their physiological
responses. Herein, interaction of silver nanoparticles with lysozyme
as a model protein has been monitored via fluorescence spectroscopy.
Formation of complex between the biomolecule and silver
nanoparticles (AgNPs) induced a steady state reduction in the
fluorescence intensity of protein at different concentrations of
nanoparticles. Tryptophan fluorescence quenching spectra suggested
that silver nanoparticles act as a foreign quencher, approaching the
protein via this residue. Analysis of the Stern-Volmer plot showed
quenching constant of 3.73 μM−1. Moreover, a single binding site in
lysozyme is suggested to play role during interaction with AgNPs,
having low affinity of binding compared to gold nanoparticles.
Unfolding studies of lysozyme showed that complex of lysozyme-
AgNPs has not undergone structural perturbations compared to the
bare protein. Results of this effort will pave the way for utilization of
sensitive spectroscopic techniques for rational design of
nanobiomaterials in biomedical applications.
Abstract: In a nuclear reactor Loss of Coolant accident (LOCA)
considers wide range of postulated damage or rupture of pipe in the
heat transport piping system. In the case of LOCA with/without
failure of emergency core cooling system in a Pressurised Heavy
water Reactor, the Pressure Tube (PT) temperature could rise
significantly due to fuel heat up and gross mismatch of the heat
generation and heat removal in the affected channel. The extent and
nature of deformation is important from reactor safety point of view.
Experimental set-ups have been designed and fabricated to simulate
ballooning (radial deformation) of PT for 220 MWe IPHWRs.
Experiments have been conducted by covering the CT by ceramic
fibers and then by submerging CT in water of voided PTs. In both
the experiments, it is observed that ballooning initiates at a
temperature around 665´┐¢C and complete contact between PT and
Caldaria Tube (CT) occurs at around 700´┐¢C approximately. The
strain rate is found to be 0.116% per second. The structural integrity
of PT is retained (no breach) for all the experiments. The PT heatup
is found to be arrested after the contact between PT and CT, thus
establishing moderator acting as an efficient heat sink for IPHWRs.