Abstract: Visual secret sharing (VSS) was proposed by Naor and Shamir in 1995. Visual secret sharing schemes encode a secret image into two or more share images, and single share image can’t obtain any information about the secret image. When superimposes the shares, it can restore the secret by human vision. Due to the traditional VSS have some problems like pixel expansion and the cost of sophisticated. And this method only can encode one secret image. The schemes of encrypting more secret images by random grids into two shares were proposed by Chen et al. in 2008. But when those restored secret images have much distortion, those schemes are almost limited in decoding. In the other words, if there is too much distortion, we can’t encrypt too much information. So, if we can adjust distortion to very small, we can encrypt more secret images. In this paper, four new algorithms which based on Chang et al.’s scheme be held in 2010 are proposed. First algorithm can adjust distortion to very small. Second algorithm distributes the distortion into two restored secret images. Third algorithm achieves no distortion for special secret images. Fourth algorithm encrypts three secret images, which not only retain the advantage of VSS but also improve on the problems of decoding.
Abstract: Synthetic aperture radar (SAR) imaging usually
requires echo data collected continuously pulse by pulse with certain
bandwidth. However in real situation, data collection or part of signal
spectrum can be interrupted due to various reasons, i.e. there will be
gaps in spatial spectrum. In this case we need to find ways to fill out
the resulted gaps and get image with defined resolution. In this paper
we introduce our work on how to apply iterative spatially variant
apodization (Super-SVA) technique to extrapolate the spatial
spectrum in both azimuthal and range directions so as to fill out the
gaps and get correct radar image.
Abstract: The wireless mesh networks (WMNs) are emerging technology in wireless networking as they can serve large scale high speed internet access. Due to its wireless multi-hop feature, wireless mesh network is prone to suffer from many attacks, such as denial of service attack (DoS). We consider a special case of DoS attack which is selective forwarding attack (a.k.a. gray hole attack). In such attack, a misbehaving mesh router selectively drops the packets it receives rom its predecessor mesh router. It is very hard to detect that packet loss is due to medium access collision, bad channel quality or because of selective forwarding attack. In this paper, we present a review of detection algorithms of selective forwarding attack and discuss their advantage & disadvantage. Finally we conclude this paper with open research issues and challenges.
Abstract: Glazing is a process used to reduce undesirable drying or dehydration of fish during frozen or cold storage. To evaluate the effect of the time/ temperature binomial of the cryogenic frozen tunnel in the amount of glazing watera Central Composite Rotatable Design was used, with application of the Response Surface Methodology. The results reveal that the time/ temperature obtained for pink cusk-eel in experimental conditions for glazing water are similar to the industrial process, but for red fish and merluza the industrial process needs some adjustments. Control charts were established and implementedto control the amount of glazing water on sardine and merluza. They show that the freezing process was statistically controlled but there were some tendencies that must be analyzed, since the trend of sample mean values approached either of the limits, mainly in merluza. Thus, appropriate actions must be taken, in order to improve the process.
Abstract: Location-aware computing is a type of pervasive
computing that utilizes user-s location as a dominant factor for
providing urban services and application-related usages. One of the
important urban services is navigation instruction for wayfinders in a
city especially when the user is a tourist. The services which are
presented to the tourists should provide adapted location aware
instructions. In order to achieve this goal, the main challenge is to
find spatial relevant objects and location-dependent information. The
aim of this paper is the development of a reusable location-aware
model to handle spatial relevancy parameters in urban location-aware
systems. In this way we utilized ontology as an approach which could
manage spatial relevancy by defining a generic model. Our
contribution is the introduction of an ontological model based on the
directed interval algebra principles. Indeed, it is assumed that the
basic elements of our ontology are the spatial intervals for the user
and his/her related contexts. The relationships between them would
model the spatial relevancy parameters. The implementation language
for the model is OWLs, a web ontology language. The achieved
results show that our proposed location-aware model and the
application adaptation strategies provide appropriate services for the
user.
Abstract: Distributed denial-of-service (DDoS) attacks pose a
serious threat to network security. There have been a lot of
methodologies and tools devised to detect DDoS attacks and reduce
the damage they cause. Still, most of the methods cannot
simultaneously achieve (1) efficient detection with a small number of
false alarms and (2) real-time transfer of packets. Here, we introduce
a method for proactive detection of DDoS attacks, by classifying the
network status, to be utilized in the detection stage of the proposed
anti-DDoS framework. Initially, we analyse the DDoS architecture
and obtain details of its phases. Then, we investigate the procedures
of DDoS attacks and select variables based on these features. Finally,
we apply the k-nearest neighbour (k-NN) method to classify the
network status into each phase of DDoS attack. The simulation result
showed that each phase of the attack scenario is classified well and
we could detect DDoS attack in the early stage.
Abstract: In this paper, we propose the robust water level detection method based on the accumulated histogram under small changed image which is acquired from water level surveillance camera. In general surveillance system, this is detecting and recognizing invasion from searching area which is in big change on the sequential images. However, in case of a water level detection system, these general surveillance techniques are not suitable due to small change on the water surface. Therefore the algorithm introduces the accumulated histogram which is emphasizing change of water surface in sequential images. Accumulated histogram is based on the current image frame. The histogram is cumulating differences between previous images and current image. But, these differences are also appeared in the land region. The band pass filter is able to remove noises in the accumulated histogram Finally, this algorithm clearly separates water and land regions. After these works, the algorithm converts from the water level value on the image space to the real water level on the real space using calibration table. The detected water level is sent to the host computer with current image. To evaluate the proposed algorithm, we use test images from various situations.
Abstract: In this paper we propose segmentation approach based
on Vector Quantization technique. Here we have used Kekre-s fast
codebook generation algorithm for segmenting low-altitude aerial
image. This is used as a preprocessing step to form segmented
homogeneous regions. Further to merge adjacent regions color
similarity and volume difference criteria is used. Experiments
performed with real aerial images of varied nature demonstrate that
this approach does not result in over segmentation or under
segmentation. The vector quantization seems to give far better results
as compared to conventional on-the-fly watershed algorithm.
Abstract: Battery storage system is emerging as an essential component of hybrid power system based on renewable energy resources such as solar and wind in order to make these sources dispatchable. Accurate modeling of battery storage system is ssential in order to ensure optimal planning of hybrid power systems incorporating battery storage. Majority of the system planning studies involving battery storage assume battery charging efficiency to be constant. However a strong correlation exists between battery charging efficiency and battery state of charge. In this work a Fuzzy logic based model has been presented for determining battery charging efficiency relative to a particular SOC. In order to demonstrate the efficacy of proposed approach, reliability evaluation studies are carried out for a hypothetical autonomous hybrid power system located in Jaisalmer, Rajasthan, India. The impact of considering battery charging efficiency as a function of state of charge is compared against the assumption of fixed battery charging efficiency for three different configurations comprising of wind-storage, solar-storage and wind-solar-storage.
Abstract: Over last two decades, due to hostilities of environment
over the internet the concerns about confidentiality of information
have increased at phenomenal rate. Therefore to safeguard the information
from attacks, number of data/information hiding methods have
evolved mostly in spatial and transformation domain.In spatial domain
data hiding techniques,the information is embedded directly on
the image plane itself. In transform domain data hiding techniques the
image is first changed from spatial domain to some other domain and
then the secret information is embedded so that the secret information
remains more secure from any attack. Information hiding algorithms
in time domain or spatial domain have high capacity and relatively
lower robustness. In contrast, the algorithms in transform domain,
such as DCT, DWT have certain robustness against some multimedia
processing.In this work the authors propose a novel steganographic
method for hiding information in the transform domain of the gray
scale image.The proposed approach works by converting the gray
level image in transform domain using discrete integer wavelet
technique through lifting scheme.This approach performs a 2-D
lifting wavelet decomposition through Haar lifted wavelet of the cover
image and computes the approximation coefficients matrix CA and
detail coefficients matrices CH, CV, and CD.Next step is to apply the
PMM technique in those coefficients to form the stego image. The
aim of this paper is to propose a high-capacity image steganography
technique that uses pixel mapping method in integer wavelet domain
with acceptable levels of imperceptibility and distortion in the cover
image and high level of overall security. This solution is independent
of the nature of the data to be hidden and produces a stego image
with minimum degradation.
Abstract: Roadways in Amman city face many problems consequent upon poor drainage systems. Evaluation tools are necessary to identify those roads needing improvement in their drainage system, and those needing regular maintenance. This work aims at evaluating drainage conditions in selected roadways in Amman city with the intent of identifying the problems encountered in their drainage systems. Three sites in the vicinity of Amman city have been selected and then inspected via several field visits to determine the state of their existing drainage systems and define the major problems encountered in these systems. The evaluation tool used in this study is based on visual inspection supported by photographs that depicted the defined problems. Following the field assessment, the drainage system in each road was rated as excellent, fair, good, or poor. The study reveals that more than 60% of the roadways in the selected sites were in poor drainage conditions, which lead to tremendous environmental problems. This assessment serves as a guide for local decision makers to help plan for the maintenance of Amman city roadways drainage systems, and propose ways of managing the associated problems.
Abstract: This study explores perceptions of English as a Foreign
Language (EFL) learners on using computer mediated communication
technology in their learner of English. The data consists of
observations of both synchronous and asynchronous communication
participants engaged in for over a period of 4 months, which included
online, and offline communication protocols, open-ended interviews
and reflection papers composed by participants.
Content analysis of interview data and the written documents listed
above, as well as, member check and triangulation techniques are the
major data analysis strategies. The findings suggest that participants
generally do not benefit from computer-mediated communication in
terms of its effect in learning a foreign language. Participants regarded
the nature of CMC as artificial, or pseudo communication that did not
aid their authentic communicational skills in English. The results of
this study sheds lights on insufficient and inconclusive findings, which
most quantitative CMC studies previously generated.
Abstract: Telemedicine is brought to life by contemporary changes of our world and summarizes the entire range of services that are at the crossroad of traditional healthcare and information technology. It is believed that eHealth can help in solving critical issues of rising costs, care for ageing and housebound population, staff shortage. It is a feasible tool to provide routine as well as specialized health service as it has the potential to improve both the access to and the standard of care. eHealth is no more an optional choice. It has already made quite a way but it still remains a fantastic challenge for the future requiring cooperation and coordination at all possible levels. The strategic objectives of this paper are: 1. To start with an attempt to clarify the mass of terms used nowadays; 2. To answer the question “Who needs eHealth"; 3. To focus on the necessity of bridging telemedicine and medical (health) informatics as well as on the dual relationship between them; as well as 4. To underline the need of networking in understanding, developing and implementing eHealth.
Abstract: –In this paper the damage in clamped-free, clampedclamped and free-free beam are analyzed considering samples
without and with structural modifications. The damage location is
investigated by the use of the bispectrum and wavelet analysis. The
mathematical models are obtained using 2D elasticity theory and the
Finite Element Method (FEM). The numerical and experimental data
are approximated using the Particle Swarm Optimizer (PSO) method
and this way is possible to adjust the localization and the severity of
the damage. The experimental data are obtained through
accelerometers placed along the sample. The system is excited using
impact hammer.
Abstract: Industrial design engineering is an information and
knowledge intensive job. Although Wikipedia offers a lot of this
information, design engineers are better served with a wiki tailored to
their job, offering information in a compact manner and functioning
as a design tool. For that reason WikID has been developed.
However for the viability of a wiki, an active user community is
essential. The main subject of this paper is a study to the influence of
the communication and the contents of WikID on the user-s
willingness to contribute.
At first the theory about a website-s first impression, general
usability guidelines and user motivation in an online community is
studied. Using this theory, the aspects of the current site are analyzed
on their suitability. These results have been verified with a
questionnaire amongst 66 industrial design engineers (or students
industrial design engineering).
The main conclusion is that design engineers are enchanted with
the existence of WikID and its knowledge structure (taxonomy) but
this structure has not become clear without any guidance. In other
words, the knowledge structure is very helpful for inspiring and
guiding design engineers through their tailored knowledge domain in
WikID but this taxonomy has to be better communicated on the main
page. Thereby the main page needs to be fitted more to the target
group preferences.
Abstract: In this paper, we analyze and test a scheme for the
estimation of electrical fundamental frequency signals from the
harmonic load current and voltage signals.
The scheme was based on using two different Multi Layer
Artificial Neural Networks (ML-ANN) one for the current and the
other for the voltage.
This study also analyzes and tests the effect of choosing the
optimum artificial neural networks- sizes which determine the quality
and accuracy of the estimation of electrical fundamental frequency
signals.
The simulink tool box of the Matlab program for the simulation of
the test system and the test of the neural networks has been used.
Abstract: This study was carried out to investigate lamb mortalities relating to ewes' breed and some managemental factors on 250 pregnant ewes (190-Rahmani, 30-Ossimi and 30-Romanov) at Mehallet Mousa, Animal Production Research Station, Kafr El- Sheikh Province, Egypt. These animals divided into five groups according to the managemental factors used. The results revealed that the lamb mortality was higher in Ossimi breed and lower in Romanov one. In addition, the highest lamb mortality occurred among lambs for unsupplemented ewes, for those had body condition score two and for lambs which born outdoor. Moreover, the lamb survivability was increased by the parity of ewes. From this study it can be concluded that the lamb mortality depends on ewes' body condition score, parity, lambing system (indoor or outdoor), nutrition during pregnancy period and selected breed. In addition, the most important period for lamb survival is the first week of age.
Abstract: This paper presents the results of an experimental
investigation carried out to evaluate the shrinkage of High Strength
Concrete. High Strength Concrete is made by partially replacement of
cement by flyash and silica fume. The shrinkage of High Strength
Concrete has been studied using the different types of coarse and fine
aggregates i.e. Sandstone and Granite of 12.5 mm size and Yamuna
and Badarpur Sand. The Mix proportion of concrete is 1:0.8:2.2 with
water cement ratio as 0.30. Superplasticizer dose @ of 2% by weight
of cement is added to achieve the required degree of workability in
terms of compaction factor.
From the test results of the above investigation it can be concluded
that the shrinkage strain of High Strength Concrete increases with
age. The shrinkage strain of concrete with replacement of cement by
10% of Flyash and Silica fume respectively at various ages are more
(6 to 10%) than the shrinkage strain of concrete without Flyash and
Silica fume. The shrinkage strain of concrete with Badarpur sand as
Fine aggregate at 90 days is slightly less (10%) than that of concrete
with Yamuna Sand. Further, the shrinkage strain of concrete with
Granite as Coarse aggregate at 90 days is slightly less (6 to 7%) than
that of concrete with Sand stone as aggregate of same size. The
shrinkage strain of High Strength Concrete is also compared with that
of normal strength concrete. Test results show that the shrinkage
strain of high strength concrete is less than that of normal strength
concrete.
Abstract: This paper aims to select the optimal location and
setting parameters of TCSC (Thyristor Controlled Series
Compensator) controller using Particle Swarm Optimization (PSO)
and Genetic Algorithm (GA) to mitigate small signal oscillations in a
multimachine power system. Though Power System Stabilizers
(PSSs) are prime choice in this issue, installation of FACTS device
has been suggested here in order to achieve appreciable damping of
system oscillations. However, performance of any FACTS devices
highly depends upon its parameters and suitable location in the
power network. In this paper PSO as well as GA based techniques are
used separately and compared their performances to investigate this
problem. The results of small signal stability analysis have been
represented employing eigenvalue as well as time domain response in
face of two common power system disturbances e.g., varying load
and transmission line outage. It has been revealed that the PSO based
TCSC controller is more effective than GA based controller even
during critical loading condition.
Abstract: A method is presented for using thermo-mechanical fatigue analysis as a tool in the design of automotive heat exchangers. Use of infra-red thermography to measure the real thermal history in the heat exchanger reduces the time necessary for calculating design parameters and improves prediction accuracy. Thermal shocks are the primary cause of heat exchanger damage. Thermo-mechanical simulation is based on the mean behavior of the aluminum tubes used in the heat exchanger. An energetic fatigue criterion is used to detect critical zones.