Abstract: The stability of Newtonian and Non-Newtonian extending films under local or global heating or cooling conditions are considered. The thickness-averaged mass, momentum and energy equations with convective and radiative heat transfer are derived, both for Newtonian and non-Newtonian fluids (Maxwell, PTT and Giesekus models considered). The stability of the system is explored using either eigenvalue analysis or transient simulations. The results showed that the influence of heating and cooling on stability strongly depends on the magnitude of the Peclet number. Examples of stabilization or destabilization of heating or cooling are shown for Pe
Abstract: In this paper the reference current for Voltage Source
Converter (VSC) of the Shunt Active Power Filter (SAPF) is
generated using Synchronous Reference Frame method,
incorporating the PI controller with anti-windup scheme. The
proposed method improves the harmonic filtering by compensating
the winding up phenomenon caused by the integral term of the PI
controller.
Using Reference Frame Transformation, the current is transformed
from om a - b - c stationery frame to rotating 0 - d - q frame. Using
the PI controller, the current in the 0 - d - q frame is controlled to
get the desired reference signal. A controller with integral action
combined with an actuator that becomes saturated can give some
undesirable effects. If the control error is so large that the integrator
saturates the actuator, the feedback path becomes ineffective because
the actuator will remain saturated even if the process output changes.
The integrator being an unstable system may then integrate to a very
large value, the phenomenon known as integrator windup.
Implementing the integrator anti-windup circuit turns off the
integrator action when the actuator saturates, hence improving the
performance of the SAPF and dynamically compensating harmonics
in the power network. In this paper the system performance is
examined with Shunt Active Power Filter simulation model.
Abstract: Although services play a crucial role in economy,
service did not gain as much importance as productivity management
in manufacturing. This paper presents key findings from literature
and practice. Based on an initial definition of complex services, seven
productivity concepts are briefly presented and assessed by relevant,
complex service specific criteria. Following the findings a complex
service productivity model is proposed. The novel model comprises
of all specific dimensions of service provision from both, the
provider-s as well as costumer-s perspective. A clear assignment of
identified value drivers and relationships between them is presented.
In order to verify the conceptual service productivity model a case
study from a project engineering department of a chemical plant
development and construction company is presented.
Abstract: To strengthen the capital market, there is a need to
integrate the capital markets within the region by removing legal or informal restriction, specifically, stock market liberalization. Thus the paper is to investigate the effects of the subsequent stock market liberalization on stock market integration in 4 ASEAN countries (Malaysia, Indonesia, Thailand, Singapore) and Korea from 1997 to 2007. The correlation between stock market liberalization and stock
market integration are to be examined by analyzing the stock prices
and returns within the region and in comparison with the world
MSCI index. Event study method is to be used with windows of ±12
months and T-7 + T. The results show that the subsequent stock
market liberalization generally, gives minor positive effects to stock
returns, except for one or two countries. The subsequent
liberalization also integrates the markets short-run and long-run.
Abstract: In this study we present our developed formative
assessment tool for students' assignments. The tool enables lecturers
to define assignments for the course and assign each problem in each
assignment a list of criteria and weights by which the students' work
is evaluated. During assessment, the lecturers feed the scores for each
criterion with justifications. When the scores of the current
assignment are completely fed in, the tool automatically generates
reports for both students and lecturers. The students receive a report
by email including detailed description of their assessed work, their
relative score and their progress across the criteria along the course
timeline. This information is presented via charts generated
automatically by the tool based on the scores fed in. The lecturers
receive a report that includes summative (e.g., averages, standard
deviations) and detailed (e.g., histogram) data of the current
assignment. This information enables the lecturers to follow the class
achievements and adjust the learning process accordingly. The tool
was examined on two pilot groups of college students that study a
course in (1) Object-Oriented Programming (2) Plane Geometry.
Results reveal that most of the students were satisfied with the
assessment process and the reports produced by the tool. The
lecturers who used the tool were also satisfied with the reports and
their contribution to the learning process.
Abstract: A procedure for the preparation of clarified Pawpaw
Juice was developed. About 750ml Pawpaw pulp was measured into
2 measuring cylinders A & B of capacity 1 litre heated to 400C,
cooled to 200C. 30mls pectinase was added into cylinder A, while
30mls distilled water was added into cylinder B. Enzyme treated
sample (A) was allowed to digest for 5hours after which it was heated
to 900C for 15 minutes to inactivate the enzyme. The heated sample
was cooled and with the aid of a mucillin cloth the pulp was filtered
to obtain the clarified pawpaw juice. The juice was filled into 100ml
plastic bottles, pasteurized at 950C for 45 minutes, cooled and stored
at room temperature. The sample treated with 30mls distilled water
also underwent the same process. Freshly pasteurized sample was
analyzed for specific gravity, titratable acidity, pH, sugars and
ascorbic acid. The remaining sample was then stored for 2 weeks and
the above analyses repeated. There were differences in the results of
the freshly pasteurized samples and stored sample in pH and ascorbic
acid levels, also sample treated with pectinase yielded higher
volumes of juice than that treated with distilled water.
Abstract: Recently there has been a growing interest in the field
of bio-mimetic robots that resemble the behaviors of an insect or an
aquatic animal, among many others. One of various bio-mimetic robot
applications is to explore pipelines, spotting any troubled areas or
malfunctions and reporting its data. Moreover, the robot is able to
prepare for and react to any abnormal routes in the pipeline. Special
types of mobile robots are necessary for the pipeline monitoring tasks.
In order to move effectively along a pipeline, the robot-s movement
will resemble that of insects or crawling animals. When situated in
massive pipelines with complex routes, the robot places fixed sensors
in several important spots in order to complete its monitoring. This
monitoring task is to prevent a major system failure by preemptively
recognizing any minor or partial malfunctions. Areas uncovered by
fixed sensors are usually impossible to provide real-time observation
and examination, and thus are dependent on periodical offline
monitoring. This paper proposes a monitoring system that is able to
monitor the entire area of pipelines–with and without fixed
sensors–by using the bio-mimetic robot.
Abstract: A new multi inner stage (MIS) cyclone was designed to
remove the acidic gas and fine particles produced from electronic
industry. To characterize gas flow in MIS cyclone, pressure and
velocity distribution were calculated by means of CFD program. Also,
the flow locus of fine particles and particle removal efficiency were
analyzed by Lagrangian method. When outlet pressure condition was
–100mmAq, the efficiency was the best in this study.
Abstract: The phenomenon of global warming or climate
change has led to many environmental issues including higher
atmospheric temperatures, intense precipitation, increased
greenhouse gaseous emissions and increased indoor discomfort.
Studies have shown that bringing nature to the roof such as
constructing green roof and implementing high-reflective roof may
give positive impact in mitigating the effects of global warming and
in increasing thermal comfort sensation inside buildings. However,
no study has been conducted to compare both types of passive roof
treatments in Malaysia in order to increase thermal comfort in
buildings. Therefore, this study is conducted to investigate the effect
of green roof and white painted roof as passive roof treatment in
improving indoor comfort of Malaysian homes. This study uses an
experimental approach in which the measurements of temperatures
are conducted on the case study building. The measurements of
outdoor and indoor environments were conducted on the flat roof
with two different types of roof treatment that are green roof and
white roof. The measurement of existing black bare roof was also
conducted to act as a control for this study.
Abstract: Prediction of bacterial virulent protein sequences can
give assistance to identification and characterization of novel
virulence-associated factors and discover drug/vaccine targets against
proteins indispensable to pathogenicity. Gene Ontology (GO)
annotation which describes functions of genes and gene products as a
controlled vocabulary of terms has been shown effectively for a
variety of tasks such as gene expression study, GO annotation
prediction, protein subcellular localization, etc. In this study, we
propose a sequence-based method Virulent-GO by mining informative
GO terms as features for predicting bacterial virulent proteins.
Each protein in the datasets used by the existing method
VirulentPred is annotated by using BLAST to obtain its homologies
with known accession numbers for retrieving GO terms. After
investigating various popular classifiers using the same five-fold
cross-validation scheme, Virulent-GO using the single kind of GO
term features with an accuracy of 82.5% is slightly better than
VirulentPred with 81.8% using five kinds of sequence-based features.
For the evaluation of independent test, Virulent-GO also yields better
results (82.0%) than VirulentPred (80.7%). When evaluating single
kind of feature with SVM, the GO term feature performs much well,
compared with each of the five kinds of features.
Abstract: In cellular networks, limited availability of resources
has to be tapped to its fullest potential. In view of this aspect, a
sophisticated averaging and voting technique has been discussed in
this paper, wherein the radio resources available are utilized to the
fullest value by taking into consideration, several network and radio
parameters which decide on when the handover has to be made and
thereby reducing the load on Base station .The increase in the load
on the Base station might be due to several unnecessary handover
taking place which can be eliminated by making judicious use of the
radio and network parameters.
Abstract: A state of the art Speaker Identification (SI) system requires a robust feature extraction unit followed by a speaker modeling scheme for generalized representation of these features. Over the years, Mel-Frequency Cepstral Coefficients (MFCC) modeled on the human auditory system has been used as a standard acoustic feature set for SI applications. However, due to the structure of its filter bank, it captures vocal tract characteristics more effectively in the lower frequency regions. This paper proposes a new set of features using a complementary filter bank structure which improves distinguishability of speaker specific cues present in the higher frequency zone. Unlike high level features that are difficult to extract, the proposed feature set involves little computational burden during the extraction process. When combined with MFCC via a parallel implementation of speaker models, the proposed feature set outperforms baseline MFCC significantly. This proposition is validated by experiments conducted on two different kinds of public databases namely YOHO (microphone speech) and POLYCOST (telephone speech) with Gaussian Mixture Models (GMM) as a Classifier for various model orders.
Abstract: In this paper we study the fuzzy c-mean clustering algorithm
combined with principal components method. Demonstratively
analysis indicate that the new clustering method is well rather than
some clustering algorithms. We also consider the validity of clustering
method.
Abstract: Manufacturing processes demand tight dimensional
tolerances. The paper concerns a transducer for precise measurement
of displacement, based on a camera containing a linescan chip.
When tests were conducted using a track of black and white stripes
with a 2mm pitch, errors in measuring on individual cycle amounted
to 1.75%, suggesting that a precision of 35 microns is achievable.
Abstract: The output beam quality of multi transverse modes of
laser, are relatively poor. In order to obtain better beam quality, one
may use an aperture inside the laser resonator. In this case, various
transverse modes can be selected. We have selected various
transverse modes both by simulation and doing experiment. By
inserting a circular aperture inside the diode end-pumped Nd:YAG
pulsed laser resonator, we have obtained 00 TEM , 01 TEM
, 20 TEM and have studied which parameters, can change the mode
shape. Then, we have determined the beam quality factor of TEM00
gaussian mode.
Abstract: The study of human hand morphology reveals that developing an artificial hand with the capabilities of human hand is an extremely challenging task. This paper presents the development of a robotic prosthetic hand focusing on the improvement of a tendon driven mechanism towards a biomimetic prosthetic hand. The design of this prosthesis hand is geared towards achieving high level of dexterity and anthropomorphism by means of a new hybrid mechanism that integrates a miniature motor driven actuation mechanism, a Shape Memory Alloy actuated mechanism and a passive mechanical linkage. The synergy of these actuators enables the flexion-extension movement at each of the finger joints within a limited size, shape and weight constraints. Tactile sensors are integrated on the finger tips and the finger phalanges area. This prosthesis hand is developed with an exact size ratio that mimics a biological hand. Its behavior resembles the human counterpart in terms of working envelope, speed and torque, and thus resembles both the key physical features and the grasping functionality of an adult hand.
Abstract: This paper presents an effective framework for Chinesesyntactic parsing, which includes two parts. The first one is a parsing framework, which is based on an improved bottom-up chart parsingalgorithm, and integrates the idea of the beam search strategy of N bestalgorithm and heuristic function of A* algorithm for pruning, then get multiple parsing trees. The second is a novel evaluation model, which integrates contextual and partial lexical information into traditional PCFG model and defines a new score function. Using this model, the tree with the highest score is found out as the best parsing tree. Finally,the contrasting experiment results are given. Keywords?syntactic parsing, PCFG, pruning, evaluation model.
Abstract: Non-saturated soils that while saturation greatly
decrease their volume, have sudden settlement due to increasing
humidity, fracture and structural crack are called loess soils. Whereas
importance of civil projects including: dams, canals and
constructions bearing this type of soil and thereof problems, it is
required for carrying out more research and study in relation to loess
soils. This research studies shear strength parameters by using
grading test, Atterberg limit, compression, direct shear and
consolidation and then effect of using cement and lime additives on
stability of loess soils is studied. In related tests, lime and cement are
separately added to mixed ratios under different percentages of soil
and for different times the stabilized samples are processed and effect
of aforesaid additives on shear strength parameters of soil is studied.
Results show that upon passing time the effect of additives and
collapsible potential is greatly decreased and upon increasing
percentage of cement and lime the maximum dry density is
decreased; however, optimum humidity is increased. In addition,
liquid limit and plastic index is decreased; however, plastic index
limit is increased. It is to be noted that results of direct shear test
reveal increasing shear strength of soil due to increasing cohesion
parameter and soil friction angle.
Abstract: The Block Sorting problem is to sort a given
permutation moving blocks. A block is defined as a substring
of the given permutation, which is also a substring of the
identity permutation. Block Sorting has been proved to be
NP-Hard. Until now two different 2-Approximation algorithms
have been presented for block sorting. These are the best known
algorithms for Block Sorting till date. In this work we present
a different characterization of Block Sorting in terms of a
transposition cycle graph. Then we suggest a heuristic,
which we show to exhibit a 2-approximation performance
guarantee for most permutations.
Abstract: Considering a reservoir with periodic states and
different cost functions with penalty, its release rules can be
modeled as a periodic Markov decision process (PMDP). First,
we prove that policy- iteration algorithm also works for the
PMDP. Then, with policy- iteration algorithm, we obtain the
optimal policies for a special aperiodic reservoir model with
two cost functions under large penalty and give a discussion
when the penalty is small.