Abstract: A dissimilarity measure between the empiric
characteristic functions of the subsamples associated to the different
classes in a multivariate data set is proposed. This measure can be
efficiently computed, and it depends on all the cases of each class. It
may be used to find groups of similar classes, which could be joined
for further analysis, or it could be employed to perform an
agglomerative hierarchical cluster analysis of the set of classes. The
final tree can serve to build a family of binary classification models,
offering an alternative approach to the multi-class SVM problem. We
have tested this dendrogram based SVM approach with the oneagainst-
one SVM approach over four publicly available data sets,
three of them being microarray data. Both performances have been
found equivalent, but the first solution requires a smaller number of
binary SVM models.
Abstract: The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating characteristics of substrate surface treatments and electroless nickel bath parameters such as pH and agitation methods are also investigated. Characterisation of the resulting deposit by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDXA) is also discussed.
Abstract: Coherent and incoherent scattering cross section measurements have been carried out using a HPGe detector on elements in the range of Z = 13 - 50 using 241Am gamma rays. The cross sections have been derived by comparing the net count rate obtained from the Compton peak of aluminium with the corresponding peak of the target. The measured cross sections for the coherent and incoherent processes are compared with theoretical values and earlier reported values. Our results are in agreement with the theoretical values.
Abstract: In the Equivalent Transformation (ET) computation
model, a program is constructed by the successive accumulation of
ET rules. A method by meta-computation by which a correct ET
rule is generated has been proposed. Although the method covers a
broad range in the generation of ET rules, all important ET rules
are not necessarily generated. Generation of more ET rules can be
achieved by supplementing generation methods which are specialized
for important ET rules. A Specialization-by-Equation (Speq) rule is
one of those important rules. A Speq rule describes a procedure in
which two variables included in an atom conjunction are equalized
due to predicate constraints. In this paper, we propose an algorithm
that systematically and recursively generate Speq rules and discuss
its effectiveness in the synthesis of ET programs. A Speq rule is
generated based on proof of a logical formula consisting of given
atom set and dis-equality. The proof is carried out by utilizing some
ET rules and the ultimately obtained rules in generating Speq rules.
Abstract: The link between Gröbner basis and linear algebra was
described by Lazard [4,5] where he realized the Gr¨obner basis
computation could be archived by applying Gaussian elimination over
Macaulay-s matrix .
In this paper, we indicate how same technique may be used to
SAGBI- Gröbner basis computations in invariant rings.
Abstract: Naïve Bayes classifiers are simple probabilistic
classifiers. Classification extracts patterns by using data file with a set
of labeled training examples and is currently one of the most
significant areas in data mining. However, Naïve Bayes assumes the
independence among the features. Structural learning among the
features thus helps in the classification problem. In this study, the use
of structural learning in Bayesian Network is proposed to be applied
where there are relationships between the features when using the
Naïve Bayes. The improvement in the classification using structural
learning is shown if there exist relationship between the features or
when they are not independent.
Abstract: Microstrip lines, widely used for good reason, are
broadband in frequency and provide circuits that are compact and
light in weight. They are generally economical to produce since they
are readily adaptable to hybrid and monolithic integrated circuit (IC)
fabrication technologies at RF and microwave frequencies. Although,
the existing EM simulation models used for the synthesis and
analysis of microstrip lines are reasonably accurate, they are
computationally intensive and time consuming. Neural networks
recently gained attention as fast and flexible vehicles to microwave
modeling, simulation and optimization. After learning and
abstracting from microwave data, through a process called training,
neural network models are used during microwave design to provide
instant answers to the task learned.This paper presents simple and
accurate ANN models for the synthesis and analysis of Microstrip
lines to more accurately compute the characteristic parameters and
the physical dimensions respectively for the required design
specifications.
Abstract: Avionic software architecture has transit from a
federated avionics architecture to an integrated modular avionics
(IMA) .ARINC 653 (Avionics Application Standard Software Interface) is a software specification for space and time partitioning in
Safety-critical avionics Real-time operating systems. Methods to transform the abstract avionics application logic function to the
executable model have been brought up, however with less
consideration about the code generating input and output model specific for ARINC 653 platform and inner-task synchronous dynamic
interaction order sequence. In this paper, we proposed an
AADL-based model-driven design methodology to fulfill the purpose
to automatically generating Cµ executable model on ARINC 653 platform from the ARINC653 architecture which defined as AADL653 in order to facilitate the development of the avionics software constructed on ARINC653 OS. This paper presents the
mapping rules between the AADL653 elements and the elements in
Cµ language, and define the code generating rules , designs an automatic C µ code generator .Then, we use a case to illustrate our
approach. Finally, we give the related work and future research directions.
Abstract: Several studies have been carried out, using various techniques, including neural networks, to discriminate vigilance states in humans from electroencephalographic (EEG) signals, but we are still far from results satisfactorily useable results. The work presented in this paper aims at improving this status with regards to 2 aspects. Firstly, we introduce an original procedure made of the association of two neural networks, a self organizing map (SOM) and a learning vector quantization (LVQ), that allows to automatically detect artefacted states and to separate the different levels of vigilance which is a major breakthrough in the field of vigilance. Lastly and more importantly, our study has been oriented toward real-worked situation and the resulting model can be easily implemented as a wearable device. It benefits from restricted computational and memory requirements and data access is very limited in time. Furthermore, some ongoing works demonstrate that this work should shortly results in the design and conception of a non invasive electronic wearable device.
Abstract: Many research works are carried out on the analysis of
traces in a digital learning environment. These studies produce large
volumes of usage tracks from the various actions performed by a
user. However, to exploit these data, compare and improve
performance, several issues are raised. To remedy this, several works
deal with this problem seen recently. This research studied a series of
questions about format and description of the data to be shared. Our
goal is to share thoughts on these issues by presenting our experience
in the analysis of trace-based log files, comparing several approaches
used in automatic classification applied to e-learning platforms.
Finally, the obtained results are discussed.
Abstract: This paper presents a implementation of an object tracking system in a video sequence. This object tracking is an important task in many vision applications. The main steps in video analysis are two: detection of interesting moving objects and tracking of such objects from frame to frame. In a similar vein, most tracking algorithms use pre-specified methods for preprocessing. In our work, we have implemented several object tracking algorithms (Meanshift, Camshift, Kalman filter) with different preprocessing methods. Then, we have evaluated the performance of these algorithms for different video sequences. The obtained results have shown good performances according to the degree of applicability and evaluation criteria.
Abstract: In this paper, application of artificial neural networks
in typical disease diagnosis has been investigated. The real procedure
of medical diagnosis which usually is employed by physicians was
analyzed and converted to a machine implementable format. Then
after selecting some symptoms of eight different diseases, a data set
contains the information of a few hundreds cases was configured and
applied to a MLP neural network. The results of the experiments and
also the advantages of using a fuzzy approach were discussed as
well. Outcomes suggest the role of effective symptoms selection and
the advantages of data fuzzificaton on a neural networks-based
automatic medical diagnosis system.
Abstract: The most common domestic birds live in Turkey are: crows (Corvus corone), pigeons (Columba livia), sparrows (Passer domesticus), starlings (Sturnus vulgaris) and blackbirds (Turdus merula). These birds give damage to the agricultural areas and make dirty the human life areas. In order to send away these birds, some different materials and methods such as chemicals, treatments, colored lights, flash and audible scarers are used. It is possible to see many studies about chemical methods in the literatures. However there is not enough works regarding audible bird scarers are reported in the literature. Therefore, a solar powered bird scarer was designed, manufactured and tested in this experimental investigation. Firstly, to understand the sensitive level of these domestic birds against to the audible scarer, many series preliminary studies were conducted. These studies showed that crows are the most resistant against to the audible bird scarer when compared with pigeons, sparrows, starlings and blackbirds. Therefore the solar powered audible bird scarer was tested on crows. The scarer was tested about one month during April- May, 2007. 18 different common known predators- sounds (voices or calls) of domestic birds from Falcon (Falco eleonorae), Falcon (Buteo lagopus), Eagle (Aquila chrysaetos), Montagu-s harrier (Circus pygargus) and Owl (Glaucidium passerinum) were selected for test of the scarer. It was seen from the results that the reaction of the birds was changed depending on the predators- sound type, camouflage of the scarer, sound quality and volume, loudspeaker play and pause periods in one application. In addition, it was also seen that the sound from Falcon (Buteo lagopus) was most effective on crows and the scarer was enough efficient.
Abstract: The focus in this work is to assess which method
allows a better forecasting of malaria cases in Bujumbura ( Burundi)
when taking into account association between climatic factors and
the disease. For the period 1996-2007, real monthly data on both
malaria epidemiology and climate in Bujumbura are described and
analyzed. We propose a hierarchical approach to achieve our
objective. We first fit a Generalized Additive Model to malaria cases
to obtain an accurate predictor, which is then used to predict future
observations. Various well-known forecasting methods are compared
leading to different results. Based on in-sample mean average
percentage error (MAPE), the multiplicative exponential smoothing
state space model with multiplicative error and seasonality performed
better.
Abstract: One of the essential sectors of Myanmar economy is
agriculture which is sensitive to climate variation. The most
important climatic element which impacts on agriculture sector is
rainfall. Thus rainfall prediction becomes an important issue in
agriculture country. Multi variables polynomial regression (MPR)
provides an effective way to describe complex nonlinear input output
relationships so that an outcome variable can be predicted from the
other or others. In this paper, the modeling of monthly rainfall
prediction over Myanmar is described in detail by applying the
polynomial regression equation. The proposed model results are
compared to the results produced by multiple linear regression model
(MLR). Experiments indicate that the prediction model based on
MPR has higher accuracy than using MLR.
Abstract: This paper presents a new function expansion method for finding traveling wave solutions of a nonlinear equations and calls it the G G -expansion method, given by Wang et al recently. As an application of this new method, we study the well-known Sawada-Kotera-Kadomtsev-Petviashivili equation and Bogoyavlensky-Konoplechenko equation. With two new expansions, general types of soliton solutions and periodic solutions for these two equations are obtained.
Abstract: This paper describes the evolution of strategies to
evaluate ePortfolios in an online Master-s of Education (M.Ed.)
degree in Instructional Technology. The ePortfolios are required as a
culminating activity for students in the program. By using Web 2.0
tools to develop the ePortfolios, students are able to showcase their
technical skills, integrate national standards, demonstrate their
professional understandings, and reflect on their individual learning.
Faculty have created assessment strategies to evaluate student
achievement of these skills. To further develop ePortfolios as a tool
promoting authentic learning, faculty are moving toward integrating
transparency as part of the evaluation process.
Abstract: Radio Frequency Identification (RFID) system is
looked upon as one of the top ten important technologies in the 20th
century and find its applications in many fields such as car industry.
The intelligent cars are one important part of this industry and always
try to find new and satisfied intelligent cars. The purpose of this
paper is to introduce an intelligent car with the based of RFID. By
storing the moving control commands such as turn right, turn left,
speed up and speed down etc. into the RFID tags beforehand and
sticking the tags on the tracks Car can read the moving control
commands from the tags and accomplish the proper actions.
Abstract: Author presents the results of a study conducted to identify criteria of efficient information system (IS) with serviceoriented architecture (SOA) realization and proposes a ranking method to evaluate SOA information systems using a set of architecture quality criteria before the systems are implemented. The method is used to compare 7 SOA projects and ranking result for SOA efficiency of the projects is provided. The choice of SOA realization project depends on following criteria categories: IS internal work and organization, SOA policies, guidelines and change management, processes and business services readiness, risk management and mitigation. The last criteria category was analyzed on the basis of projects statistics.
Abstract: The objective of this paper is to review and assess the
methodological issues and problems in marketing research, data and
knowledge mining in Turkey. As a summary, academic marketing
research publications in Turkey have significant problems. The most
vital problem seems to be related with modeling. Most of the
publications had major weaknesses in modeling. There were also,
serious problems regarding measurement and scaling, sampling and
analyses. Analyses myopia seems to be the most important problem
for young academia in Turkey. Another very important finding is the
lack of publications on data and knowledge mining in the academic
world.