Abstract: Learning is the acquisition of new mental schemata, knowledge, abilities and skills which can be used to solve problems potentially more successfully. The learning process is optimum when it is assisted and personalized. Learning is not a single activity, but should involve many possible activities to make learning become meaningful. Many e-learning applications provide facilities to support teaching and learning activities. One way to identify whether the e-learning system is being used by the learners is through the number of hits that can be obtained from the e-learning system's log data. However, we cannot rely solely to the number of hits in order to determine whether learning had occurred meaningfully. This is due to the fact that meaningful learning should engage five characteristics namely active, constructive, intentional, authentic and cooperative. This paper aims to analyze the e-learning activities that is meaningful to learning. By focusing on the meaningful learning characteristics, we match it to the corresponding Moodle e-learning activities. This analysis discovers the activities that have high impact to meaningful learning, as well as activities that are less meaningful. The high impact activities is given high weights since it become important to meaningful learning, while the low impact has less weight and said to be supportive e-learning activities. The result of this analysis helps us categorize which e-learning activities that are meaningful to learning and guide us to measure the effectiveness of e-learning usage.
Abstract: The objective of the study is to investigate the
effect of a footballer-s postural on selected physical fitness
components. Twenty-one (21) subjects of the university male
footballers under the Sport Excellence Center programme were
photographed using qualitative analysis. The postural variables
were stratified manually into normal and anomalies group and
their flexibility, strength and SAQ performance were
compared using the Mann-Whitney Test. The AROM
assessment and SAQ test reported no significance difference
(Z=-.398, p=0.711, p>0.05), similar to the lower body strength
was shown with no significance different (Z=-.493, p=0.640,
p>0.05). In contrast, only 1 RM strength test for the upper
body strength test shown with a significance different (Z=-
2.537, p=0.009, p
Abstract: Due to the limited lifetime of the nodes in ad hoc and sensor networks, energy efficiency needs to be an important design consideration in any routing algorithm. It is known that by employing a virtual backbone in a wireless network, the efficiency of any routing scheme for the network can be improved. One common design for routing protocols in mobile ad hoc networks is to use positioning information; we use the node-s geometric locations to introduce an algorithm that can construct the virtual backbone structure locally in 3D environment. The algorithm construction has a constant time.
Abstract: The predictability of masonry arch bridges and their
behaviour is widely considered doubtful due to the lack of knowledge
about the conditions of a given masonry arch bridge. The assessment
methods for masonry arch bridges are MEXE, ARCHIE, RING and
Frame Analysis Method. The material properties of the masonry and
fill material are extremely difficult to determine accurately.
Consequently, it is necessary to examine the effect of load dispersal
angle through the fill material, the effect of variations in the stiffness
of the masonry, the tensile strength of the masonry mortar continuum
and the compressive strength of the masonry mortar continuum. It is
also important to understand the effect of fill material on load
dispersal angle to determine their influence on ratings. In this paper a
series of parametric studies, to examine the sensitivity of assessment
ratings to the various sets of input data required by the frame analysis
method, are carried out.
Abstract: A stack with a small critical temperature gradient is
desirable for a standing wave thermoacoustic engine to obtain a low
onset temperature difference (the minimum temperature difference to
start engine-s self-oscillation). The viscous and heat relaxation loss in
the stack determines the critical temperature gradient. In this work, a
dimensionless critical temperature gradient factor is obtained based
on the linear thermoacoustic theory. It is indicated that the
impedance determines the proportion between the viscous loss, heat
relaxation losses and the power production from the heat energy. It
reveals the effects of the channel dimensions, geometrical
configuration and the local acoustic impedance on the critical
temperature gradient in stacks. The numerical analysis shows that
there exists a possible optimum combination of these parameters
which leads to the lowest critical temperature gradient. Furthermore,
several different geometries have been tested and compared
numerically.
Abstract: This paper has introduced a slope photogrammetric mapping using unmanned aerial vehicle. There are two units of UAV has been used in this study; namely; fixed wing and multi-rotor. Both UAVs were used to capture images at the study area. A consumer digital camera was mounted vertically at the bottom of UAV and captured the images at an altitude. The objectives of this study are to obtain three dimensional coordinates of slope area and to determine the accuracy of photogrammetric product produced from both UAVs. Several control points and checkpoints were established Real Time Kinematic Global Positioning System (RTK-GPS) in the study area. All acquired images from both UAVs went through all photogrammetric processes such as interior orientation, exterior orientation, aerial triangulation and bundle adjustment using photogrammetric software. Two primary results were produced in this study; namely; digital elevation model and digital orthophoto. Based on results, UAV system can be used to mapping slope area especially for limited budget and time constraints project.
Abstract: The householder RLS (HRLS) algorithm is an O(N2)
algorithm which recursively updates an arbitrary square-root of the
input data correlation matrix and naturally provides the LS weight
vector. A data dependent householder matrix is applied for such
an update. In this paper a recursive estimate of the eigenvalue
spread and misalignment of the algorithm is presented at a very low
computational cost. Misalignment is found to be highly sensitive to
the eigenvalue spread of input signals, output noise of the system and
exponential window. Simulation results show noticeable degradation
in the misalignment by increase in eigenvalue spread as well as
system-s output noise, while exponential window was kept constant.
Abstract: The various applications of VLSI circuits in highperformance
computing, telecommunications, and consumer
electronics has been expanding progressively, and at a very hasty
pace. This paper describes a new model for partitioning a circuit
using DBSCAN and fuzzy ARTMAP neural network. The first step
is concerned with feature extraction, where we had make use
DBSCAN algorithm. The second step is the classification and is
composed of a fuzzy ARTMAP neural network. The performance of
both approaches is compared using benchmark data provided by
MCNC standard cell placement benchmark netlists. Analysis of the
investigational results proved that the fuzzy ARTMAP with
DBSCAN model achieves greater performance then only fuzzy
ARTMAP in recognizing sub-circuits with lowest amount of
interconnections between them The recognition rate using fuzzy
ARTMAP with DBSCAN is 97.7% compared to only fuzzy
ARTMAP.
Abstract: Thepurpose of the research is to characterize the levels
of satisfaction of the students in e-learning post-graduate courses,
taking into account specific dimensions of the course which were
considered as benchmarks for the quality of this type of online
learning initiative, as well as the levels of satisfaction towards each
specific indicator identified in each dimension. It was also an aim of
this study to understand how thesedimensions relate to one another.
Using a quantitative research approach in the collection and analysis
of the data, the study involves the participation of the students who
attended on e-learning course in 2010/2011. The conclusions of this
study suggest that online students present relatively high levels of
satisfaction, which points towards a positive experience during the
course. It is possible to note that there is a correlation between the
different dimensions studied, consequently leading to different
improvement strategies. Ultimately, this investigation aims to
contribute to the promotion of quality and the success of e-learning
initiatives in Higher Education.
Abstract: Image clustering is a process of grouping images
based on their similarity. The image clustering usually uses the color
component, texture, edge, shape, or mixture of two components, etc.
This research aims to explore image clustering using color
composition. In order to complete this image clustering, three main
components should be considered, which are color space, image
representation (feature extraction), and clustering method itself. We
aim to explore which composition of these factors will produce the
best clustering results by combining various techniques from the
three components. The color spaces use RGB, HSV, and L*a*b*
method. The image representations use Histogram and Gaussian
Mixture Model (GMM), whereas the clustering methods use KMeans
and Agglomerative Hierarchical Clustering algorithm. The
results of the experiment show that GMM representation is better
combined with RGB and L*a*b* color space, whereas Histogram is
better combined with HSV. The experiments also show that K-Means
is better than Agglomerative Hierarchical for images clustering.
Abstract: Factor analysis was applied to two stages biogas
production from banana stem waste allowing a screening of the
experimental variables second stage temperature (T), organic loading
rates (OLR) and hydraulic retention times (HRT). Biogas production
was found to be strongly influenced by all the above experimental
variables. Results from factorial analysis have shown that all
variables which were HRT, OLR and T have significant effect to
biogas production. Increased in HRT and OLR could increased the
biogas yield. The performance was tested under the conditions of
various T (35oC-60oC), OLR (0.3 g TS/l.d–1.9 gTS/l.d), and HRT (3
d–15 d). Conditions for temperature, OLR and HRT in this study
were based on the best range obtained from literature review.
Abstract: In this paper, fabrication and study of electronic properties of Au/methyl-red/Ag surface type Schottky diode by current-voltage (I-V) method has been reported. The I-V characteristics of the Schottky diode showed the good rectifying behavior. The values of ideality factor n and barrier height b of Au/methyl-red/Ag Schottky diode were calculated from the semi-log I-V characteristics and by using the Cheung functions. From semi-log current-voltage characteristics the values of n and b were found 1.93 and 0.254 eV, respectively, while by using Cheung functions their values were calculated 1.89 and 0.26 eV, respectively. The effect of series resistance was also analyzed by Cheung functions. The series resistance RS values were determined from dV/d(lnI)–I and H(I)–I graphs and were found to be 1.1 k and 1.3 k, respectively.
Abstract: The Spalart and Allmaras turbulence model has been
implemented in a numerical code to study the compressible turbulent
flows, which the system of governing equations is solved with a
finite volume approach using a structured grid. The AUSM+ scheme
is used to calculate the inviscid fluxes. Different benchmark
problems have been computed to validate the implementation and
numerical results are shown. A special Attention is paid to wall jet
applications. In this study, the jet is submitted to various wall
boundary conditions (adiabatic or uniform heat flux) in forced
convection regime and both two-dimensional and axisymmetric wall
jets are considered. The comparison between the numerical results
and experimental data has given the validity of this turbulence model
to study the turbulent wall jets especially in engineering applications.
Abstract: At the time where electronic books, or e-Books, offer
students a fun way of learning , teachers who are used to the paper
text books may find it as a new challenge to use it as a part of
learning process. Precisely, there are various types of e-Books
available to suit students- knowledge, characteristics, abilities, and
interests. The paper discusses teachers- perceptions on the use of ebooks
as a paper text book in the classroom. A survey was conducted
on 72 teachers who use e-books as textbooks. It was discovered that a
majority of these teachers had good perceptions on the use of ebooks.
However, they had little problems using the devices. It can be
overcome with some strategies and a suggested framework.
Abstract: Human Resource (HR) applications can be used to
provide fair and consistent decisions, and to improve the
effectiveness of decision making processes. Besides that, among
the challenge for HR professionals is to manage organization
talents, especially to ensure the right person for the right job at the
right time. For that reason, in this article, we attempt to describe
the potential to implement one of the talent management tasks i.e.
identifying existing talent by predicting their performance as one of
HR application for talent management. This study suggests the
potential HR system architecture for talent forecasting by using
past experience knowledge known as Knowledge Discovery in
Database (KDD) or Data Mining. This article consists of three
main parts; the first part deals with the overview of HR
applications, the prediction techniques and application, the general
view of Data mining and the basic concept of talent management
in HRM. The second part is to understand the use of Data Mining
technique in order to solve one of the talent management tasks, and
the third part is to propose the potential HR system architecture for
talent forecasting.
Abstract: A multiphase harmonic load flow algorithm is developed based on backward/forward sweep to examine the effects of various factors on the neutral to earth voltage (NEV), including unsymmetrical system configuration, load unbalance and harmonic injection. The proposed algorithm composes fundamental frequency and harmonic frequencies power flows. The algorithm and the associated models are tested on IEEE 13 bus system. The magnitude of NEV is investigated under various conditions of the number of grounding rods per feeder lengths, the grounding rods resistance and the grounding resistance of the in feeding source. Additionally, the harmonic injection of nonlinear loads has been considered and its influences on NEV under different conditions are shown.
Abstract: As the fossil fuels kept on depleting, intense research in developing hydrogen (H2) as the alternative fuel has been done to cater our tremendous demand for fuel. The potential of H2 as the ultimate clean fuel differs with the fossil fuel that releases significant amounts of carbon dioxide (CO2) into the surrounding and leads to the global warming. The experimental work was carried out to study the production of H2 from palm kernel shell steam gasification at different variables such as heating rate, steam to biomass ratio and adsorbent to biomass ratio. Maximum H2 composition which is 61% (volume basis) was obtained at heating rate of 100oCmin-1, steam/biomass of 2:1 ratio, and adsorbent/biomass of 1:1 ratio. The commercial adsorbent had been modified by utilizing the alcoholwater mixture. Characteristics of both adsorbents were investigated and it is concluded that flowability and floodability of modified CaO is significantly improved.
Abstract: When binary decision diagrams are formed from
uniformly distributed Monte Carlo data for a large number of
variables, the complexity of the decision diagrams exhibits a
predictable relationship to the number of variables and minterms. In
the present work, a neural network model has been used to analyze the
pattern of shortest path length for larger number of Monte Carlo data
points. The neural model shows a strong descriptive power for the
ISCAS benchmark data with an RMS error of 0.102 for the shortest
path length complexity. Therefore, the model can be considered as a
method of predicting path length complexities; this is expected to lead
to minimum time complexity of very large-scale integrated circuitries
and related computer-aided design tools that use binary decision
diagrams.
Abstract: This paper discusses the causal explanation capability
of QRIOM, a tool aimed at supporting learning of organic chemistry
reactions. The development of the tool is based on the hybrid use of
Qualitative Reasoning (QR) technique and Qualitative Process
Theory (QPT) ontology. Our simulation combines symbolic,
qualitative description of relations with quantity analysis to generate
causal graphs. The pedagogy embedded in the simulator is to both
simulate and explain organic reactions. Qualitative reasoning through
a causal chain will be presented to explain the overall changes made
on the substrate; from initial substrate until the production of final
outputs. Several uses of the QPT modeling constructs in supporting
behavioral and causal explanation during run-time will also be
demonstrated. Explaining organic reactions through causal graph
trace can help improve the reasoning ability of learners in that their
conceptual understanding of the subject is nurtured.
Abstract: The use of neural networks is popular in various
building applications such as prediction of heating load, ventilation
rate and indoor temperature. Significant is, that only few papers deal
with indoor carbon dioxide (CO2) prediction which is a very good
indicator of indoor air quality (IAQ). In this study, a data-driven
modelling method based on multilayer perceptron network for indoor
air carbon dioxide in an apartment building is developed.
Temperature and humidity measurements are used as input variables
to the network. Motivation for this study derives from the following
issues. First, measuring carbon dioxide is expensive and sensors
power consumptions is high and secondly, this leads to short
operating times of battery-powered sensors. The results show that
predicting CO2 concentration based on relative humidity and
temperature measurements, is difficult. Therefore, more additional
information is needed.