Abstract: In order to study the effect of phosphate solubilization
microorganisms (PSM) and plant growth promoting rhizobacteria
(PGPR) on yield and yield components of corn Zea mays (L. cv.
SC604) an experiment was conducted at research farm of Sari
Agricultural Sciences and Natural Resources University, Iran during
2007. Experiment laid out as split plot based on randomized
complete block design with three replications. Three levels of
manures (consisted of 20 Mg.ha-1 farmyard manure, 15 Mg.ha-1 green
manure and check or without any manures) as main plots and eight
levels of biofertilizers (consisted of 1-NPK or conventional fertilizer
application; 2-NPK+PSM+PGPR; 3 NP50%K+PSM+PGPR; 4-
N50%PK+PSM +PGPR; 5-N50%P50%K+PSM+ PGPR; 6-PK+PGPR; 7-
NK+PSM and 8-PSM+PGPR) as sub plots were treatments. Results
showed that farmyard manure application increased row number, ear
weight, grain number per ear, grain yield, biological yield and
harvest index compared to check. Furthermore, using of PSM and
PGPR in addition to conventional fertilizer applications (NPK) could
improve ear weight, row number and grain number per row and
ultimately increased grain yield in green manure and check plots.
According to results in all fertilizer treatments application of PSM
and PGPR together could reduce P application by 50% without any
significant reduction of grain yield. However, this treatment could
not compensate 50% reduction of N application.
Abstract: Evaluation of crop plants resistance to environmental
stresses specially in germination stage is a critical factor in their
selection in different conditions of cultivation. Therefore use of a
procedure in controllable situation can help to evaluate plants
reaction to stress quickly and precisely. In order to study germination
characteristics of flax in water and salinity stress conditions were
conducted two laboratories experimental. The two experimental were
conducted in 4-replicant completing random design for salinity and
water stress. The treatment, for salinity and water stress was three
potential (zero, 40, 80 mM) of NaCl and three potential (zero, -2, -4
bar) of PEG respectively. Germination percentage and rate, in
addition to Radical and plumule length and dry-weight and
plumule/Radical ration were measured. All of characteristics reduce
under water stress conditions. salinity stress significant reduce
germination rate and Radical and plumule length of flax seeds.
Hydropriming and osmopriming significant increased germination
rate, plumule length and plumule/Radical ration ration of flax seeds.
But germination percentage and Radical and plumule dry weight
significant increased only in hydropriming treat. Hydropriming and
osmopriming could not be used to improved germination under saline
and drought stress. But has more tolerance in salinity and drought
stress in flax by less reduce in Radical and plumule length under
saline and drought stress.
Abstract: A three-dimensional finite element modeling for austenitic stainless steel AISI 304 annealed condition sheets of 1.0 mm thickness are developed using ABAQUS® software. This includes spot welded and weld bonded joints models. Both models undergo thermal heat caused by spot welding process and then are subjected to axial load up to the failure point. The properties of elastic and plastic regions, modulus of elasticity, fracture limit, nugget and heat affected zones are determined. Complete loaddisplacement curve for each joining model is obtained and compared with the experiment data and with the finite element models without including the effect of thermal process. In general, the results obtained for both spot welded and weld-bonded joints affected by thermal process showed an excellent agreement with the experimental data.
Abstract: The main objective of this paper is to investigate the
enhancement of power system stability via coordinated tuning of
Power System Stabilizers (PSSs) in a multi-machine power system.
The design problem of the proposed controllers is formulated as an
optimization problem. Chaotic catfish particle swarm optimization
(C-Catfish PSO) algorithm is used to minimize the ITAE objective
function. The proposed algorithm is evaluated on a two-area, 4-
machines system. The robustness of the proposed algorithm is
verified on this system under different operating conditions and
applying a three-phase fault. The nonlinear time-domain simulation
results and some performance indices show the effectiveness of the
proposed controller in damping power system oscillations and this
novel optimization algorithm is compared with particle swarm
optimization (PSO).
Abstract: This paper investigates the problem of automated defect
detection for textile fabrics and proposes a new optimal filter design
method to solve this problem. Gabor Wavelet Network (GWN) is
chosen as the major technique to extract the texture features from
textile fabrics. Based on the features extracted, an optimal Gabor filter
can be designed. In view of this optimal filter, a new semi-supervised
defect detection scheme is proposed, which consists of one real-valued
Gabor filter and one smoothing filter. The performance of the scheme
is evaluated by using an offline test database with 78 homogeneous
textile images. The test results exhibit accurate defect detection with
low false alarm, thus showing the effectiveness and robustness of the
proposed scheme. To evaluate the detection scheme comprehensively,
a prototyped detection system is developed to conduct a real time test.
The experiment results obtained confirm the efficiency and
effectiveness of the proposed detection scheme.
Abstract: The study of soil for agriculture purposes has
remained the main focus of research since the beginning of civilization as humans- food related requirements remained closely linked with the soil. The study of soil has generated an interest
among the researchers for very similar other reasons including transmission, reflection and refraction of signals for deploying
wireless underground sensor networks or for the monitoring of objects on (or in ) soil in the form of better understanding of soil
electromagnetic characteristics properties. The moisture content has
been very instrumental in such studies as it decides on the resistance of the soil, and hence the attenuation on signals traveling through soil
or the attenuation the signals may suffer upon their impact on soil. This work is related testing and characterizing a measurement circuit
meant for the detection of moisture level content in soil.
Abstract: Network reconfiguration is an operation to modify the
network topology. The implementation of network reconfiguration
has many advantages such as loss minimization, increasing system
security and others. In this paper, two topics about the network
reconfiguration in distribution system are briefly described. The first
topic summarizes its impacts while the second explains some
heuristic optimization techniques for solving the network
reconfiguration problem.
Abstract: The purpose of this research was to study the
motivation factors to influence the decision to choose Thai Fabric. A
multiple-stage sample was utilized to collect 400 samples from
working women who had diverse occupations all over Thailand. This
research was a quantitative analysis and questionnaire was used a tool
to collect data. Descriptive statistics used in this research included
percentage, average, and standard deviation and inferential statistics
included hypothesis testing of one way ANOVA.
The research findings revealed that demographic factors and social
factors had an influence to the positive idea of wearing Thai fabric (F
= 5.377, P value < 0.05). The respondents who had the age over 41
years old had a better positive idea of wearing Thai fabric than other
groups. Moreover, the findings revealed that age had influenced the
positive idea of wearing Thai fabric (F = 3.918, P value < 0.05). The
respondents who had the age over 41 years old also had stronger
believe that wearing Thai fabric to work and social gatherings are
socially acceptable than other groups.
Abstract: This paper presents a mean for reducing the torque
variation during the revolution of a vertical-axis wind turbine
(VAWT) by increasing the blade number. For this purpose, twodimensional
CDF analysis have been performed on a straight-bladed
Darreius-type rotor. After describing the computational model, a
complete campaign of simulations based on full RANS unsteady
calculations is proposed for a three, four and five-bladed rotor
architecture characterized by a NACA 0025 airfoil. For each
proposed rotor configuration, flow field characteristics are
investigated at several values of tip speed ratio, allowing a
quantification of the influence of blade number on flow geometric
features and dynamic quantities, such as rotor torque and power.
Finally, torque and power curves are compared for the analyzed
architectures, achieving a quantification of the effect of blade number
on overall rotor performance.
Abstract: Nowadays the construction industry is growing specially among developing counties. Iran also has a critical role in these industries in terms of workers disorders. Work-related musculoskeletal disorders (WMSDs) assign 7% of the whole diseases in the society, which make some limitations. One of the main factors, which are ended to WMSDs, is awkward posture. Steel bar bending is considered as one of the prominent performance among construction workers. In this case study we conducted to find the major tasks of bar benders and the most important related risk factors. This study was carried out among twenty workers (18-45 years) as our volunteer samples in some construction sites with less than 6 floors in two regions of Tehran municipality. The data was gathered through in depth observation, interview and questionnaire. Also postural analysis was done by OWAS. In another part of study we used NMQ for gathering some data about psychosocial effects of work related disorders. Our findings show that 64% of workers were not aware of work risks, also about 59% of workers had troubles in their wrists, hands, and especially among workers who worked in steel bar bending. In 46% cases low back pain were prevalence. Considering with gathered data and results, awkward postures and long term tasks and its duration are known as the main risk factors in WMSDs among construction workers, so work-rest schedule and also tools design should be considered to make an ergonomic condition for the mentioned workers.
Abstract: This work presents the hydrogen production from
steam gasification of palm kernel shell (PKS) at 700 oC in the
presence of 5% Ni/BEA and 5% Fe/BEA as catalysts. The steam
gasification was performed in two-staged reactors to evaluate the
effect of calcinations temperature and the steam to biomass ratio on
the product gas composition. The catalytic activity of Ni/BEA
catalyst decreases with increasing calcinations temperatures from 500
to 700 oC. The highest H2 concentration is produced by Fe/BEA
(600) with more than 71 vol%. The catalytic activity of the catalysts
tested is found to correspond to its physicochemical properties. The
optimum range for steam to biomass ratio if found to be between 2 to
4. Excess steam content results in temperature drop in the gasifier
which is undesirable for the gasification reactions.
Abstract: Creation of information society, or in other words, a
society based on knowledge, has wide consequences, both on
individual and complete society, and in general – on a economy of
one country. Development and implementation of ICT represents a
stimulant for economic growth. On individual level, knowledge,
skills and information gathered using ICT, are expanding individual
possibilities of persons, enabling them to have access to timely
sensitive information, such as market prices or investment
conditions, possibilities to access Government-s or private
development funds, etc. By doing so, productivity is increased both
on individual and national level and therefore social wellbeing in
general. In one word, creation of information society - a knowledge
society is happening.
This work will describe challenges and strategies that will follow
the development as well as obstacles in creating information society
– knowledge society in Montenegro.
Abstract: This paper presents a study of laminar to turbulent transition on a profile specifically designed for wind turbine blades, the DU91-W2-250, which belongs to a class of wind turbine dedicated airfoils, developed by Delft University of Technology. A comparison between the experimental behavior of the airfoil studied at Delft wind tunnel and the numerical predictions of the commercial CFD solver ANSYS FLUENT® has been performed. The prediction capabilities of the Spalart-Allmaras turbulence model and of the γ-θ Transitional model have been tested. A sensitivity analysis of the numerical results to the spatial domain discretization has also been performed using four different computational grids, which have been created using the mesher GAMBIT®. The comparison between experimental measurements and CFD results have allowed to determine the importance of the numerical prediction of the laminar to turbulent transition, in order not to overestimate airfoil friction drag due to a fully turbulent-regime flow computation.
Abstract: In many applications there is a broad variety of
information relevant to a focal “object" of interest, and the fusion of such heterogeneous data types is desirable for classification and
categorization. While these various data types can sometimes be treated as orthogonal (such as the hull number, superstructure color,
and speed of an oil tanker), there are instances where the inference and the correlation between quantities can provide improved fusion
capabilities (such as the height, weight, and gender of a person). A
service-oriented architecture has been designed and prototyped to
support the fusion of information for such “object-centric" situations.
It is modular, scalable, and flexible, and designed to support new data sources, fusion algorithms, and computational resources without affecting existing services. The architecture is designed to simplify
the incorporation of legacy systems, support exact and probabilistic entity disambiguation, recognize and utilize multiple types of
uncertainties, and minimize network bandwidth requirements.
Abstract: Unintentional falls are rife throughout the ages and
have been the common factor of serious or critical injuries especially
for the elderly society. Fortunately, owing to the recent rapid
advancement in technology, fall detection system is made possible,
enabling detection of falling events for the elderly, monitoring the
patient and consequently provides emergency support in the event of
falling. This paper presents a review of 3 main categories of fall
detection techniques, ranging from year 2005 to year 2010. This
paper will be focusing on discussing the techniques alongside with
summary and conclusion for them.
Abstract: The objective of this paper is to establish a possible relationship between sustainable business practice and firm performance. Using a field survey methodology, a sample of sixty manufacturing companies in Nigeria was studied. The firms were categorised into two groups, environmentally 'responsible' and 'irresponsible' firms. An investigation was undertaken into the possible relationship between firm performance and three selected indicators of sustainable business practice: employee health and safety (EHS), waste management (WM), and community development (CD), common within the 30 'responsible' firms. Findings from empirical results reveal that the sustainable practices of the 'responsible' firms are significantly related with firm performance. In addition, sustainable practices are inversely related with fines and penalties. The paper concludes that, within the Nigerian setting at least, sustainability affects corporate performance and sustainability may be a possible tool for corporate conflict resolution as evidenced in the reduction of fines, penalties and compensations. The paper therefore recommends research into the relationship between sustainability and conflict management.
Abstract: This paper shows possibility of extraction Social,
Group and Individual Mind from Multiple Agents Rule Bases. Types
those Rule bases are selected as two fuzzy systems, namely
Mambdani and Takagi-Sugeno fuzzy system. Their rule bases are
describing (modeling) agent behavior. Modifying of agent behavior
in the time varying environment will be provided by learning fuzzyneural
networks and optimization of their parameters with using
genetic algorithms in development system FUZNET. Finally,
extraction Social, Group and Individual Mind from Multiple Agents
Rule Bases are provided by Cognitive analysis and Matching
criterion.
Abstract: The alumosilicate ceramics with mullite crystalline phase are used in various branches of science and technique. The mullite refractory ceramics with high porosity serve as a heat insulator and as a constructional materials [1], [2]. The purpose of the work was to sinter high porosity ceramic and to increase the quantity of mullite phase in this mullite, mullite-corundum ceramics. Two types of compositions were prepared at during the experiment. The first type is compositions with commercial alumina and silica oxides. The second type is from mixing these oxides with 10, 20 and 30 wt.%. of kaolin. In all samples the Al2O3 and SiO2 were in 2.57:1 ratio, because that was conformed to mullite stechiometric compositions (3Al2O3.2SiO2). The types of alumina oxides were α-Al2O3 (d50=4µm) and γ-Al2O3 (d50=80µm). Ratios of α-: γ-Al2O3 were (1:1) or (1:3). The porous materials were prepared by slip casting of suspension of raw materials. The aluminium paste (0.18 wt.%) was used as a pore former. Water content in the suspensions was 26-47 wt.%. Pore formation occurred as a result of hydrogen formation in chemical reaction between aluminium paste and water [2]. The samples were sintered at the temperature of 1650°C and 1750°C for one hour. The increasing amount of kaolin, α-: γ-Al2O3 at the ratio (1:3) and sintering at the highest temperature raised the quantity of mullite phase. The mullite phase began to dominate over the corundum phase.
Abstract: Bead-on-plate welds were carried out on AISI 316L
(N) austenitic stainless steel (ASS) using flux cored arc welding
(FCAW) process. The bead on plates weld was conducted as per L25
orthogonal array. In this paper, the weld bead geometry such as depth
of penetration (DOP), bead width (BW) and weld reinforcement (R)
of AISI 316L (N) ASS are investigated. Taguchi approach is used as
statistical design of experiment (DOE) technique for optimizing the
selected welding input parameters. Grey relational analysis and
desirability approach are applied to optimize the input parameters
considering multiple output variables simultaneously. Confirmation
experiment has also been conducted to validate the optimized
parameters.
Abstract: Climate change could lead to changes in cultural
environments and landscapes as we know them.Climate change
presents an immediate and significant threat to our natural and built
environments and to the ways of life which co-exist with these
environments. In most traditional buildings, the harmony of texture
with nature and environment has been ever considered; so houses and
cities have been mixed with their natural environment so
astonishingly and the selection and usage of materials have been in
such a way that they have provided the utmost conformity with the
environment, as the result the created areas have a unique beauty and
attraction.The extent to which climate change contributes to
destruction procedure on Iran-s historic buildings.is a subject of
current discussion. Cities, towns and built-up areas also have their
own characteristics that might make them particularly vulnerable to
climate change.