Abstract: Cutting fluids, usually in the form of a liquid, are
applied to the chip formation zone in order to improve the cutting
conditions. Cutting fluid can be expensive and represents a biological
and environmental hazard that requires proper recycling and
disposal, thus adding to the cost of the machining operation. For
these reasons dry cutting or dry machining has become an
increasingly important approach; in dry machining no coolant or
lubricant is used. This paper discussed the effect of the dry cutting on
cutting force and tool life when machining aerospace materials
(Haynes 242) with using two different coated carbide cutting tools
(TiAlN and TiN/MT-TiCN/TiN). Response surface method (RSM)
was used to minimize the number of experiments. ParTiAlN Swarm
Optimisation (PSO) models were developed to optimize the
machining parameters (cutting speed, federate and axial depth) and
obtain the optimum cutting force and tool life. It observed that
carbide cutting tool coated with TiAlN performed better in dry
cutting compared with TiN/MT-TiCN/TiN. On other hand, TiAlN
performed more superior with using of 100 % water soluble coolant.
Due to the high temperature produced by aerospace materials, the
cutting tool still required lubricant to sustain the heat transfer from
the workpiece.
Abstract: Movable power sources of proton exchange
membrane fuel cells (PEMFC) are the important research done in the
current fuel cells (FC) field. The PEMFC system control influences
the cell performance greatly and it is a control system for industrial
complex problems, due to the imprecision, uncertainty and partial
truth and intrinsic nonlinear characteristics of PEMFCs. In this paper
an adaptive PI control strategy using neural network adaptive Morlet
wavelet for control is proposed. It is based on a single layer feed
forward neural networks with hidden nodes of adaptive morlet
wavelet functions controller and an infinite impulse response (IIR)
recurrent structure. The IIR is combined by cascading to the network
to provide double local structure resulting in improving speed of
learning. The proposed method is applied to a typical 1 KW PEMFC
system and the results show the proposed method has more accuracy
against to MLP (Multi Layer Perceptron) method.
Abstract: LabVIEW and SIMULINK are two most widely used
graphical programming environments for designing digital signal
processing and control systems. Unlike conventional text-based
programming languages such as C, Cµ and MATLAB, graphical
programming involves block-based code developments, allowing a
more efficient mechanism to build and analyze control systems. In
this paper a LabVIEW environment has been employed as a
graphical user interface for monitoring the operation of a controlled
distillation column, by visualizing both the closed loop performance
and the user selected control conditions, while the column dynamics
has been modeled under the SIMULINK environment. This tool has
been applied to the PID based decoupled control of a binary
distillation column. By means of such integrated environments the
control designer is able to monitor and control the plant behavior and
optimize the response when both, the quality improvement of
distillation products and the operation efficiency tasks, are
considered.
Abstract: Although many researchers have studied the flow
hydraulics in compound channels, there are still many complicated problems in determination of their flow rating curves. Many different
methods have been presented for these channels but extending them
for all types of compound channels with different geometrical and
hydraulic conditions is certainly difficult. In this study, by aid of nearly 400 laboratory and field data sets of geometry and flow rating
curves from 30 different straight compound sections and using artificial neural networks (ANNs), flow discharge in compound channels was estimated. 13 dimensionless input variables including relative depth, relative roughness, relative width, aspect ratio, bed
slope, main channel side slopes, flood plains side slopes and berm
inclination and one output variable (flow discharge), have been used
in ANNs. Comparison of ANNs model and traditional method
(divided channel method-DCM) shows high accuracy of ANNs model results. The results of Sensitivity analysis showed that the relative depth with 47.6 percent contribution, is the most effective input parameter for flow discharge prediction. Relative width and
relative roughness have 19.3 and 12.2 percent of importance, respectively. On the other hand, shape parameter, main channel and
flood plains side slopes with 2.1, 3.8 and 3.8 percent of contribution, have the least importance.
Abstract: This paper attempts to explain response components of Electrovestibulography (EVestG) using a computer simulation of a three-canal model of the vestibular system. EVestG is a potentially new diagnostic method for Meniere's disease. EVestG is a variant of Electrocochleography (ECOG), which has been used as a standard method for diagnosing Meniere's disease - it can be used to measure the SP/AP ratio, where an SP/AP ratio greater than 0.4-0.5 is indicative of Meniere-s Disease. In EVestG, an applied head tilt replaces the acoustic stimulus of ECOG. The EVestG output is also an SP/AP type plot, where SP is the summing potential, and AP is the action potential amplitude. AP is thought of as being proportional to the size of a population of afferents in an excitatory neural firing state. A simulation of the fluid volume displacement in the vestibular labyrinth in response to various types of head tilts (ipsilateral, backwards and horizontal rotation) was performed, and a simple neural model based on these simulations developed. The simple neural model shows that the change in firing rate of the utricle is much larger in magnitude than the change in firing rates of all three semi-circular canals following a head tilt (except in a horizontal rotation). The data suggests that the change in utricular firing rate is a minimum 2-3 orders of magnitude larger than changes in firing rates of the canals during ipsilateral/backward tilts. Based on these results, the neural response recorded by the electrode in our EVestG recordings is expected to be dominated by the utricle in ipsilateral/backward tilts (It is important to note that the effect of the saccule and efferent signals were not taken into account in this model). If the utricle response dominates the EVestG recordings as the modeling results suggest, then EVestG has the potential to diagnose utricular hair cell damage due to a viral infection (which has been cited as one possible cause of Meniere's Disease).
Abstract: The objectives of this research were to compare the success of SME registered in Nakorn Pathom Province divided in personal data also to study the relations between the innovation knowledge and capability and the success of SME registered in Nakorn Pathom Province and to study the relations between the work efficiency and the success of SME registered in Nakorn Pathom Province. A questionnaire was utilized as a tool to collect data. Statistics utilized in this research included frequency, percentage, mean, standard deviation, and multiple regression analysis. Data were analyzed by using Statistical Package for the Social Sciences.The findings revealed that the majority of respondents were male with the age between 25-34 years old, hold undergraduate degree, married and stay together. The average income of respondents was between 10,001-20,000 baht. It also found that in terms of innovation knowledge and capability, there were two variables had an influence on the amount of innovation knowledge and capability, innovation evaluation which were physical characteristic and innovation process.
Abstract: Set covering problem is a classical problem in
computer science and complexity theory. It has many applications,
such as airline crew scheduling problem, facilities location problem,
vehicle routing, assignment problem, etc. In this paper, three
different techniques are applied to solve set covering problem.
Firstly, a mathematical model of set covering problem is introduced
and solved by using optimization solver, LINGO. Secondly, the
Genetic Algorithm Toolbox available in MATLAB is used to solve
set covering problem. And lastly, an ant colony optimization method
is programmed in MATLAB programming language. Results
obtained from these methods are presented in tables. In order to
assess the performance of the techniques used in this project, the
benchmark problems available in open literature are used.
Abstract: In this paper, the residual stress of thermal spray
coatings in gas turbine component by curvature method has been
studied. The samples and shaft were coated by hard WC-12Co
cermets using high velocity oxy fuel (HVOF) after preparation in
same conditions. The curvature of coated samples was measured by
using of coordinate measurement machine (CMM). The metallurgical
and Tribological studies has been made on the coated shaft using
optical microscopy and scanning electron microscopy (SEM)
Abstract: The mathematical modeling of different biological
processes is usually used to predict or assess behavior of systems in
which these processes take place. This study deals with mathematical
and computer modeling of bi-substrate enzymatic reactions with
ping-pong mechanism, which play an important role in different
biochemical pathways. Besides that, three models of competitive
inhibition were designed using different software packages. The main
objective of this study is to represent the results from in silico
investigation of bi-substrate enzymatic reactions with ordered pingpong
mechanism in the presence of competitive inhibitors, as well as
to describe in details the inhibition effects. The simulation of the
models with certain kinetic parameters allowed investigating the
behavior of reactions as well as determined some interesting aspects
concerning influence of different cases of competitive inhibition.
Simultaneous presence of two inhibitors, competitive to the S1 and S2
substrates have been studied. Moreover, we have found the pattern of
simultaneous influence of both inhibitors.
Abstract: This research presents a fuzzy multi-objective model
for a machine selection problem in a flexible manufacturing system
of a tire company. Two main objectives are minimization of an
average machine error and minimization of the total setup time.
Conventionally, the working team uses trial and error in selecting a
pressing machine for each task due to the complexity and constraints
of the problem. So, both objectives may not satisfy. Moreover, trial
and error takes a lot of time to get the final decision. Therefore, in
this research preemptive fuzzy goal programming model is developed
for solving this multi-objective problem. The proposed model can
obtain the appropriate results that the Decision Making (DM) is
satisfied for both objectives. Besides, alternative choice can be easily
generated by varying the satisfaction level. Additionally, decision
time can be reduced by using the model, which includes all
constraints of the system to generate the solutions. A numerical
example is also illustrated to show the effectiveness of the proposed
model.
Abstract: This paper proposes, for the first time, how the
challenges facing the guard-band designs including the margin
assist-circuits scheme for the screening-test in the coming process
generations should be addressed. The increased screening error
impacts are discussed based on the proposed statistical analysis
models. It has been shown that the yield-loss caused by the
misjudgment on the screening test would become 5-orders of
magnitude larger than that for the conventional one when the
amplitude of random telegraph noise (RTN) caused variations
approaches to that of random dopant fluctuation. Three fitting methods
to approximate the RTN caused complex Gamma mixtures
distributions by the simple Gaussian mixtures model (GMM) are
proposed and compared. It has been verified that the proposed
methods can reduce the error of the fail-bit predictions by 4-orders of
magnitude.
Abstract: This paper presents work characterizing finite element
performance boundaries within which live, interactive finite element
modeling is feasible on current and emerging systems. These results
are based on wide-ranging tests performed using a prototype finite
element program implemented specifically for this study, thereby enabling
the unified investigation of numerous direct and iterative solver
strategies and implementations in a variety of modeling contexts.
The results are intended to be useful for researchers interested in
interactive analysis by providing baseline performance estimates, to
give guidance in matching solution strategies to problem domains,
and to spur further work addressing the challenge of extending the
present boundaries.
Abstract: Rutting is one of the major load-related distresses in airport flexible pavements. Rutting in paving materials develop gradually with an increasing number of load applications, usually appearing as longitudinal depressions in the wheel paths and it may be accompanied by small upheavals to the sides. Significant research has been conducted to determine the factors which affect rutting and how they can be controlled. Using the experimental design concepts, a series of tests can be conducted while varying levels of different parameters, which could be the cause for rutting in airport flexible pavements. If proper experimental design is done, the results obtained from these tests can give a better insight into the causes of rutting and the presence of interactions and synergisms among the system variables which have influence on rutting. Although traditionally, laboratory experiments are conducted in a controlled fashion to understand the statistical interaction of variables in such situations, this study is an attempt to identify the critical system variables influencing airport flexible pavement rut depth from a statistical DoE perspective using real field data from a full-scale test facility. The test results do strongly indicate that the response (rut depth) has too much noise in it and it would not allow determination of a good model. From a statistical DoE perspective, two major changes proposed for this experiment are: (1) actual replication of the tests is definitely required, (2) nuisance variables need to be identified and blocked properly. Further investigation is necessary to determine possible sources of noise in the experiment.
Abstract: Arsenic in the sediments of the ash lagoons of the coal-fired power plant in Pagbilao, Quezon Province in the Philippines was sequentially extracted to determine its potential for leaching to the groundwater and the adjacent marine environment. Results show that 89% of the As is bound to the quasi-crystalline Fe/Mn oxides and hydroxide matrix in the sediments, whereas, the adsorbed and exchangeable As hosted by the clay minerals, representing those that are easiest to release from the sediment matrix, is below 10% of the acid leachable As. These As in these sediment matrices represent the possible maximum amount of As that can be released and supplied to the groundwater and the adjacent marine environment. Of the 89% reducible As, up to 4% is associated with the easily reducible variety, whereas, the rest is more strongly bonded by the moderately reducible variety. Based on the long-term As content of the lagoon water, the average desorption rate of As is calculated to be very low -- 0.3-0.5% on the average and 0.6% on the maximum. This indicates that As is well-fixed by its sediment matrices in the ash lagoon, attenuating the influx of As into the adjacent groundwater and marine environments.
Abstract: This paper presents the application of discrete-time
variable structure control with sliding mode based on the 'reaching
law' method for robust control of a 'simple inverted pendulum on
moving cart' - a standard nonlinear benchmark system. The
controllers designed using the above techniques are completely
insensitive to parametric uncertainty and external disturbance. The
controller design is carried out using pole placement technique to find
state feedback gain matrix , which decides the dynamic behavior
of the system during sliding mode. This is followed by feedback gain
realization using the control law which is synthesized from 'Gao-s
reaching law'. The model of a single inverted pendulum and the
discrete variable structure control controller are developed, simulated
in MATLAB-SIMULINK and results are presented. The response of
this simulation is compared with that of the discrete linear quadratic
regulator (DLQR) and the advantages of sliding mode controller over
DLQR are also presented
Abstract: Group key management is an important functional
building block for any secure multicast architecture.
Thereby, it has been extensively studied in the literature.
In this paper we present relevant group key management
protocols. Then, we compare them against some pertinent
performance criteria.
Abstract: We successfully developed and tested a new
separation layer solving problems with unmanageable deposits inside the boilers of Zluticka Heating Plant. The deposits are mainly created
by glass-forming melts. We plotted straw ash compositions in K2OCaO-
SiO2 phase diagram and illustrated that they are in the area of low-melting eutectic points. To prevent the melting of ash and the
formation of deposits, we modified ash compositions by injecting additives into biomass fuel, and thus effectively suppressed deposits in a burner.
Abstract: During the last decade ultrafine grained (UFG) and nano-structured (NS) materials have experienced a rapid development. In this research work finite element analysis has been carried out to investigate the plastic strain distribution in equal channel angular process (ECAP). The magnitudes of Standard deviation (S. D.) and inhomogeneity index (Ci) were compared for different ECAP passes. Verification of a three-dimensional finite element model was performed with experimental tests. Finally the mechanical property including impact energy of ultrafine grained pure commercially pure Aluminum produced by severe plastic deformation method has been examined. For this aim, equal channel angular pressing die with the channel angle, outer corner angle and channel diameter of 90°, 20° and 20mm had been designed and manufactured. Commercial pure Aluminum billets were ECAPed up to four passes by route BC at the ambient temperature. The results indicated that there is a great improvement at the hardness measurement, yield strength and ultimate tensile strength after ECAP process. It is found that the magnitudes of HV reach 67HV from 21HV after the final stage of process. Also, about 330% and 285% enhancement at the YS and UTS values have been obtained after the fourth pass as compared to the as-received conditions, respectively. On the other hand, the elongation to failure and impact energy have been reduced by 23% and 50% after imposing four passes of ECAP process, respectively.
Abstract: The agricultural organic farming is different from
conventional farming in a way that is aimed at providing a balanced
and constructive action in agricultural systems. With the increase in
intensive agriculture, undesirable changes were being observed in
ecosystems with irreparable damage being caused to the natural
equilibrium. This is the reason for the increasing interest in organic
farming as an environment friendly agricultural production method.
In the present work three red fruits produced in organic farming were
analyzed, namely raspberry, gooseberry and blueberry. The samples
were harvested in a local farm when at plain maturation. The results
obtained allowed to conclude that the blueberry contained higher
amounts of phenolic compounds, total tannins and total anthocyanins
than raspberry and gooseberry. Furthermore, the HPLC analysis
allowed to identify monomeric anthocyanins and phenolic acids in
the three fruits studied.
Abstract: This research uses computational linguistics, an area of study that employs a computer to process natural language, and aims at discerning the patterns that exist in declarative sentences used in technical texts. The approach is mathematical, and the focus is on instructional texts found on web pages. The technique developed by the author and named the MAYA Semantic Technique is used here and organized into four stages. In the first stage, the parts of speech in each sentence are identified. In the second stage, the subject of the sentence is determined. In the third stage, MAYA performs a frequency analysis on the remaining words to determine the verb and its object. In the fourth stage, MAYA does statistical analysis to determine the content of the web page. The advantage of the MAYA Semantic Technique lies in its use of mathematical principles to represent grammatical operations which assist processing and accuracy if performed on unambiguous text. The MAYA Semantic Technique is part of a proposed architecture for an entire web-based intelligent tutoring system. On a sample set of sentences, partial semantics derived using the MAYA Semantic Technique were approximately 80% accurate. The system currently processes technical text in one domain, namely Cµ programming. In this domain all the keywords and programming concepts are known and understood.