Abstract: A measurement system was successfully fabricated to
detect ion concentrations (hydrogen and chlorine) in this study.
PIC18F4520, the microcontroller was used as the control unit in the
measurement system. The measurement system was practically used
to sense the H+ and Cl- in different examples, and the pH and pCl
values were exhibited on real-time LCD display promptly. In the study,
the measurement method is used to judge whether the response voltage
is stable. The change quantity is smaller than 0.01%, that the present
response voltage compares with next response voltage for H+
measurement, and the above condition is established only 6 sec.
Besides, the change quantity is smaller than 0.01%, that the present
response voltage compares with next response voltage for Clmeasurement,
and the above condition is established only 5 sec.
Furthermore, the average error quantities would also be considered,
and they are 0.05 and 0.07 for measurements of pH and pCl values,
respectively.
Abstract: A mathematical model for determining the overall efficiency
of a multistage tractor gearbox including all gear, lubricant,
surface finish related parameters and operating conditions is
presented. Sliding friction, rolling friction and windage losses were
considered as the main sources of power loss in the gearing system. A
computer code in FORTRAN was developed to simulate the model.
Sliding friction contributes about 98% of the total power loss for
gear trains operating at relatively low speeds (less than 2000 rpm
input speed). Rolling frictional losses decrease with increased load
while windage losses are only significant for gears running at very
high speeds (greater than 3000 rpm). The results also showed that the
overall efficiency varies over the path of contact of the gear meshes
ranging between 94% to 99.5%.
Abstract: In this paper, we show that the stability can not be
achieved with current stabilizing MPC methods for some unstable
processes. Hence we present a new method for stabilizing these
processes. The main idea is to use a new time varying weighted cost
function for traditional GPC. This stabilizes the closed loop system
without adding soft or hard constraint in optimization problem. By
studying different examples it is shown that using the proposed
method, the closed-loop stability of unstable nonminimum phase
process is achieved.
Abstract: Vehicular communications play a substantial role in providing safety in transportation by means of safety message exchange. Researchers have proposed several solutions for securing safety messages. Protocols based on a fixed key infrastructure are more efficient in implementation and maintain stronger security in comparison with dynamic structures. These protocols utilize zone partitioning to establish distinct key infrastructure under Certificate Authority (CA) supervision in different regions. Secure anonymous broadcasting (SAB) is one of these protocols that preserves most of security aspects but it has some deficiencies in practice. A very important issue is region change of a vehicle for its mobility. Changing regions leads to change of CA and necessity of having new key set to resume communication. In this paper, we propose solutions for informing vehicles about region change to obtain new key set before entering next region. This hinders attackers- intrusion, packet loss and lessons time delay. We also make key request messages secure by confirming old CA-s public key to the message, hence stronger security for safety message broadcasting is attained.
Abstract: detecting the deadlock is one of the important
problems in distributed systems and different solutions have been
proposed for it. Among the many deadlock detection algorithms,
Edge-chasing has been the most widely used. In Edge-chasing
algorithm, a special message called probe is made and sent along
dependency edges. When the initiator of a probe receives the probe
back the existence of a deadlock is revealed. But these algorithms are
not problem-free. One of the problems associated with them is that
they cannot detect some deadlocks and they even identify false
deadlocks. A key point not mentioned in the literature is that when
the process is waiting to obtain the required resources and its
execution has been blocked, how it can actually respond to probe
messages in the system. Also the question of 'which process should
be victimized in order to achieve a better performance when multiple
cycles exist within one single process in the system' has received
little attention. In this paper, one of the basic concepts of the
operating system - daemon - will be used to solve the problems
mentioned. The proposed Algorithm becomes engaged in sending
probe messages to the mandatory daemons and collects enough
information to effectively identify and resolve multi-cycle deadlocks
in distributed systems.
Abstract: The burst of Web 2.0 technology and social
networking tools manifest different styles of learning and managing
knowledge among both knowledge workers and adult learners. In the
Western countries, open-learning concept has been made popular due
to the ease of use and the reach that the technology provides. In
Malaysia, there are still some gaps between the learners- acceptance
of technology and the full implementation of the technology in the
education system. There is a need to understand how adult learners,
who are knowledge workers, manage their personal knowledge via
social networking tools, especially in their learning process. Four
processes of personal knowledge management (PKM) and four
cognitive enablers are proposed supported by analysed data on adult
learners in a university. The model derived from these processes and
enablers is tested and presented, with recommendations on features to be included in adult learners- learning environment.
Abstract: New graph similarity methods have been proposed in this work with the aim to refining the chemical information extracted from molecules matching. For this purpose, data fusion of the isomorphic and nonisomorphic subgraphs into a new similarity measure, the Approximate Similarity, was carried out by several approaches. The application of the proposed method to the development of quantitative structure-activity relationships (QSAR) has provided reliable tools for predicting several pharmacological parameters: binding of steroids to the globulin-corticosteroid receptor, the activity of benzodiazepine receptor compounds, and the blood brain barrier permeability. Acceptable results were obtained for the models presented here.
Abstract: The investigation results of high-density hydrogen
heating by high-current electric arc are presented at initial pressure
from 5 MPa to 160 MPa with current amplitude up to 1.6 MA and
current rate of rise 109-1011 A/s. When changing the initial pressure
and current rate of rise, channel temperature varies from several
electronvolts to hundreds electronvolts. Arc channel radius is several
millimeters. But the radius of the discharge chamber greater than the
radius of the arc channel on approximately order of magnitude. High
efficiency of gas heating is caused by radiation absorption of
hydrogen surrounding the arc. Current channel consist from vapor of
the initiating wire. At current rate of rise of 109 A/s and relatively
small current amplitude gas heating occurs due to radiation
absorption in the band transparency of hydrogen by the wire vapours
with photon energies less than 13.6 eV. At current rate of rise of
1011 A/s gas heating is due to hydrogen absorption of soft X-rays
from discharge channel.
Abstract: The aspiration of this research article is to target and
focus the gains of university-Industry (U-I) collaborations and
exploring those hurdles which are the obstacles for attaining these
gains. University-Industry collaborations have attained great
importance since 1980 in USA due to its application in all fields of
life. U-I collaboration is a bilateral process where academia is a
proactive member to make such alliances. Universities want to
ameliorate their academic-base with the technicalities of technobabbles.
U-I collaboration is becoming an essential lane for achieving
innovative goals in this century. Many developed nations have set
successful examples to prove this phenomenon as a catalyst to reduce
costs, efforts and personnel for R&D projects. This study is exploits
amplitudes of UI collaboration incentives in the light of success
stories of developed countries. Many universities in USA, UK,
Canada and various European Countries have been engaged with
enterprises for numerous collaborative agreements. A long list of
strategic and short term R&D projects has been executed in
developed countries to accomplish their intended purposes. Due to
the lack of intentions, genuine research and research-oriented
environment, the mentioned field could not grow very well in
developing countries. During last decade, a new wave of research
has induced the institutes of developing countries to promote R&D
culture especially in Pakistan. Higher Education Commission (HEC)
has initiated many projects and funding supports for universities
which have collaborative intentions with industry.
Findings show that rapid innovation, overwhelm the technological
complexities and articulated intellectual-base are major incentives
which steer both partners to establish faculty-industry alliances. Everchanging
technologies, concerned about intellectual property,
different research environment and culture, research relevancy (Basic
or applied), exposure differences and diversity of knowledge
(bookish or practical) are main barriers to establish and retain joint
ventures. Findings also concluded that, it is dire need to support and
enhance cooperation among academia and industry to promote highly
coordinated research behaviors. Author has proposed a roadmap for
developing countries to promote R&D clusters among faculty and
industry to deal the technological challenges and innovation
complexities. Based on our research findings, Model for R&D
Collaboration for developing countries also have been proposed to
promote articulated R&D environment. If developing countries
follow this phenomenon, rapid innovations can be achieved with
limited R&D budget heads.
Abstract: the obligatory step during immunoglobulin and lysozyme concentration process is thermal treatment. The combination of temperature and time used in processing can affect the structure of the proteins and involve unfolding and aggregation. The aim of the present study was to evaluate the heat stability of total Igs, the particular immunoglobulin classes and lysozyme in milk. Milk samples were obtained from conventional dairy herd in Latvia. Raw milk samples were pasteurized in different regimes: 63 °C 30 min, 72 °C 15-20 s, 78 °C 15-20 s, 85 °C 15-20 s, 95 °C 15-20 s. The concentrations of Igs (IgA, IgG, IgM) and lysozyme were determined by turbodimetric method. During research was established, that activity of antimicrobial proteins decreases differently. Less concentration reduce was established in a case of lysozyme.
Abstract: Due to the excess of a vehicle operation through its life, some elements may face failure and deteriorate with time. This leads us to carry out maintenance, repair, tune up or full overhaul. After a certain period, the vehicle elements deteriorations increase with time which causes a very high increase of doing the maintenance operations and their costs. However, the logic decision at this point is to replace the current vehicle by a new one with minimum failure and maximum income. The importance of studying vehicle replacement problems come from the increase of stopping days due to many deteriorations in the vehicle parts. These deteriorations increase year after year causing an increase of operating costs and decrease the vehicle income. Vehicle replacement aims to determine the optimum time to keep, maintain, overhaul, renew and replace vehicles. This leads to an improvement in vehicle income, total operating costs, maintenance cost, fuel and oil costs, ton-kilometers, vehicle and engine performance, vehicle noise, vibration, and pollution. The aim of this paper is to find the optimum replacement policies of Kuwait Passenger Transport Company (KPTCP) fleet of busses. The objective of these policies is to maximize the busses pure profits. The dynamic programming (D.P.) technique is used to generate the busses optimal replacement policies
Abstract: In this paper a new approach to prioritize urban planning projects in an efficient and reliable way is presented. It is based on environmental pressure indices and multicriteria decision methods. The paper introduces a rigorous method with acceptable complexity of rank ordering urban development proposals according to their environmental pressure. The technique combines the use of Environmental Pressure Indicators, the aggregation of indicators in an Environmental Pressure Index by means of the Analytic Network Process method and interpreting the information obtained from the experts during the decision-making process. The ANP method allows the aggregation of the experts- judgments on each of the indicators into one Environmental Pressure Index. In addition, ANP is based on utility ratio functions which are the most appropriate for the analysis of uncertain data, like experts- estimations. Finally, unlike the other multicriteria techniques, ANP allows the decision problem to be modelled using the relationships among dependent criteria. The method has been applied to the proposal for urban development of La Carlota airport in Caracas (Venezuela). The Venezuelan Government would like to see a recreational project develop on the abandoned area and mean a significant improvement for the capital. There are currently three options on their table which are currently under evaluation. They include a Health Club, a Residential area and a Theme Park. The participating experts coincided in the appreciation that the method proposed in this paper is useful and an improvement from traditional techniques such as environmental impact studies, lifecycle analysis, etc. They find the results obtained coherent, the process seems sufficiently rigorous and precise, and the use of resources is significantly less than in other methods.
Abstract: Automatic reusability appraisal could be helpful in
evaluating the quality of developed or developing reusable software
components and in identification of reusable components from
existing legacy systems; that can save cost of developing the software
from scratch. But the issue of how to identify reusable components
from existing systems has remained relatively unexplored. In this
paper, we have mentioned two-tier approach by studying the
structural attributes as well as usability or relevancy of the
component to a particular domain. Latent semantic analysis is used
for the feature vector representation of various software domains. It
exploits the fact that FeatureVector codes can be seen as documents
containing terms -the idenifiers present in the components- and so
text modeling methods that capture co-occurrence information in
low-dimensional spaces can be used. Further, we devised Neuro-
Fuzzy hybrid Inference System, which takes structural metric values
as input and calculates the reusability of the software component.
Decision tree algorithm is used to decide initial set of fuzzy rules for
the Neuro-fuzzy system. The results obtained are convincing enough
to propose the system for economical identification and retrieval of
reusable software components.
Abstract: The main thrust of this paper is to assess the level of disclosure in the annual reports of non-financial Greek firms and to empirically investigate the hypothesized impact of several firm characteristics on the extent of mandatory disclosure. A disclosure checklist consisting of 100 mandatory items was developed to assess the level of disclosure in the 2009 annual reports of 43 Greek companies listed at the Athens stock exchange. The association between the level of disclosure and some firm characteristics was examined using multiple linear regression analysis. The study reveals that Greek companies on general have responded adequately to the mandatory disclosure requirements of the regulatory bodies. The findings also indicate that firm size was significant positively associated with the level of disclosure. The remaining variables such as age, profitability, liquidity, and board composition were found to be insignificant in explaining the variation of mandatory disclosures. The outcome of this study is undoubtedly of great concern to the investment community at large to assist in evaluating the extent of mandatory disclosure by Greek firms and explaining the variation of disclosure in light of firm-specific characteristics.
Abstract: Gabor-based face representation has achieved enormous success in face recognition. This paper addresses a novel algorithm for face recognition using neural networks trained by Gabor features. The system is commenced on convolving a face image with a series of Gabor filter coefficients at different scales and orientations. Two novel contributions of this paper are: scaling of rms contrast and introduction of fuzzily skewed filter. The neural network employed for face recognition is based on the multilayer perceptron (MLP) architecture with backpropagation algorithm and incorporates the convolution filter response of Gabor jet. The effectiveness of the algorithm has been justified over a face database with images captured at different illumination conditions.
Abstract: Non-profit organizations, especially religious-based
institutions, have long played a very important role in society.
Nevertheless, scandals such as inefficient management and the use of
unlawful fundraising activities have raised questions regarding the
governance and accountability of these organizations. As such, the
issues have attracted considerable research interest. However, there is
still limited research on accountability in religious based
organizations, especially in the context of Islamic religious
organizations. Hence, the purpose of this paper is to discuss the
issues of accounting and accountability in religious organizations,
specifically in Islamic religious establishments. The paper starts by
looking at the conventional meaning and concept of accountability.
This is followed by a discussion of the principles of accountability
within the Islamic framework. In so doing, the history of the role of
accounting within Muslim society and also the differences between
the Islamic and conventional view of accountability are reviewed.
Insights gained from previous research on accountability in faith
based organizations are also discussed
Abstract: Processing tabah bamboo shoot as fermented pickle is
one of the way to increase the shelf life of this bamboo shoot. The
advantage of this shoot is low concentration of hydro cyanic acid
(HCN) make it potential for functional food product. This study
aimed to determine the characteristic of tabah bamboo shoot pickle
such as total of lactic acid bacteria (LAB), pH, total acidity, and
hydro cyanic acid (HCN) content, and also find the LAB’s type
involved during fermentation, and organic acids’ profiles. The pickle
was made by natural fermentation with 6% salt concentration and
fermentation conducted for 13 days.
The result showed during the fermentation time, in the 4th day
LAB’s number was highest as much as 72 x 107 CFU/ml and the
lowest pH was 3.09. We also found decreasing in HCN from 37.8
ppm at the beginning to 20.52 ppm at the end of fermentation
process. The organic acids detected during the fermentation were
lactic acid with the highest concentration was 0.0546 g/100 g and
small amount of acetic acid. By using PCR method, the 18 of LABs
which had rod shape were detected as member of Lactobacillus spp.,
in which 17 strains detected as L. plantarum.
Abstract: The database reverse engineering problems and
solving processes are getting mature, even though, the academic
community is facing the complex problem of knowledge transfer,
both in university and industrial contexts. This paper presents a new
CASE tool developed at the University of Jordan which addresses an
efficient support of this transfer, namely UJ-CASE-TOOL. It is a
small and self-contained application exhibiting representative
problems and appropriate solutions that can be understood in a
limited time. It presents an algorithm that describes the developed
academic CASE tool which has been used for several years both as
an illustration of the principles of database reverse engineering and
as an exercise aimed at academic and industrial students.
Abstract: Data mining techniques have been used in medical
research for many years and have been known to be effective. In order
to solve such problems as long-waiting time, congestion, and delayed
patient care, faced by emergency departments, this study concentrates
on building a hybrid methodology, combining data mining techniques
such as association rules and classification trees. The methodology is
applied to real-world emergency data collected from a hospital and is
evaluated by comparing with other techniques. The methodology is
expected to help physicians to make a faster and more accurate
classification of chest pain diseases.
Abstract: With the rapid development of wireless mobile communication, applications for mobile devices must focus on network security. In 2008, Chang-Chang proposed security improvements on the Lu et al.-s elliptic curve authentication key agreement protocol for wireless mobile networks. However, this paper shows that Chang- Chang-s improved protocol is still vulnerable to off-line password guessing attacks unlike their claims.