Abstract: Regenerative gas turbine engine cycle is presented that yields higher cycle efficiencies than simple cycle operating under the same conditions. The power output, efficiency and specific fuel consumption are simulated with respect to operating conditions. The analytical formulae about the relation to determine the thermal efficiency are derived taking into account the effected operation conditions (ambient temperature, compression ratio, regenerator effectiveness, compressor efficiency, turbine efficiency and turbine inlet temperature). Model calculations for a wide range of parameters are presented, as are comparisons with simple gas turbine cycle. The power output and thermal efficiency are found to be increasing with the regenerative effectiveness, and the compressor and turbine efficiencies. The efficiency increased with increase the compression ratio to 5, then efficiency decreased with increased compression ratio, but in simple cycle the thermal efficiency always increase with increased in compression ratio. The increased in ambient temperature caused decreased thermal efficiency, but the increased in turbine inlet temperature increase thermal efficiency.
Abstract: Poly-β-hydroxybutyrate (PHB) is one of the most
famous biopolymers that has various applications in production of
biodegradable carriers. The most important strategy for enhancing
efficiency in production process and reducing the price of PHB, is the
accurate expression of kinetic model of products formation and
parameters that are effective on it, such as Dry Cell Weight (DCW)
and substrate consumption. Considering the high capabilities of
artificial neural networks in modeling and simulation of non-linear
systems such as biological and chemical industries that mainly are
multivariable systems, kinetic modeling of microbial production of
PHB that is a complex and non-linear biological process, the three
layers perceptron neural network model was used in this study.
Artificial neural network educates itself and finds the hidden laws
behind the data with mapping based on experimental data, of dry cell
weight, substrate concentration as input and PHB concentration as
output. For training the network, a series of experimental data for
PHB production from Hydrogenophaga Pseudoflava by glucose
carbon source was used. After training the network, two other
experimental data sets that have not intervened in the network
education, including dry cell concentration and substrate
concentration were applied as inputs to the network, and PHB
concentration was predicted by the network. Comparison of predicted
data by network and experimental data, indicated a high precision
predicted for both fructose and whey carbon sources. Also in present
study for better understanding of the ability of neural network in
modeling of biological processes, microbial production kinetic of
PHB by Leudeking-Piret experimental equation was modeled. The
Observed result indicated an accurate prediction of PHB
concentration by artificial neural network higher than Leudeking-
Piret model.
Abstract: Ad hoc networks are characterized by multihop wireless connectivity, frequently changing network topology and the need for efficient dynamic routing protocols. We compare the performance of three routing protocols for mobile ad hoc networks: Dynamic Source Routing (DSR), Ad Hoc On-Demand Distance Vector Routing (AODV), location-aided routing (LAR1).Our evaluation is based on energy consumption in mobile ad hoc networks. The performance differentials are analyzed using varying network load, mobility, and network size. We simulate protocols with GLOMOSIM simulator. Based on the observations, we make recommendations about when the performance of either protocol can be best.
Abstract: Energy consumption is a very important topic these
days especially regarding air conditioning in residential buildings,
since this takes the biggest amount of energy in buildings total
consumption, residential buildings constitute the biggest percentage
of energy consumption in Bahrain.
This research reflects on the effects of shading percentage in
different solar orientations on the energy consumption inside
residential buildings (domestic dwellings).
The research as found that, there are different effects of shading in
changing building orientation:
• 0.69% for the shading percentage 25% when the building is
oriented to the north (0º);
• 18.59% for 75% of shading in north-west orientation
(325º);
• The best effect for shading is in north-west orientation
(315º);
• The less effect for shading was in case of the building
orientation is the north (0º).
Abstract: In this paper after reviewing some previous studies, in
order to optimize the above knee prosthesis, beside the inertial
properties a new controlling parameter is informed. This controlling
parameter makes the prosthesis able to act as a multi behavior system
when the amputee is opposing to different environments. This active
prosthesis with the new controlling parameter can simplify the
control of prosthesis and reduce the rate of energy consumption in
comparison to recently presented similar prosthesis “Agonistantagonist
active knee prosthesis".
In this paper three models are generated, a passive, an active, and
an optimized active prosthesis. Second order Taylor series is the
numerical method in solution of the models equations and the
optimization procedure is genetic algorithm.
Modeling the prosthesis which comprises this new controlling
parameter (SEP) during the swing phase represents acceptable results
in comparison to natural behavior of shank. Reported results in this
paper represent 3.3 degrees as the maximum deviation of models
shank angle from the natural pattern. The natural gait pattern belongs
to walking at the speed of 81 m/min.
Abstract: Optimal design of structure has a main role in reduction of material usage which leads to deduction in the final cost of construction projects. Evolutionary approaches are found to be more successful techniques for solving size and shape structural optimization problem since it uses a stochastic random search instead of a gradient search. By reviewing the recent literature works the problem found was the optimization of weight. A new meta-heuristic algorithm called as Cuckoo Search (CS) Algorithm has used for the optimization of the total weight of the truss structures. This paper has used set of 10 bars and 25 bars trusses for the testing purpose. The main objective of this work is to reduce the number of iterations, weight and the total time consumption. In order to demonstrate the effectiveness of the present method, minimum weight design of truss structures is performed and the results of the CS are compared with other algorithms.
Abstract: The effects of commercial or bovine yeasts on the
performance and blood variables of broiler chickens intoxicated with
aflatoxin were investigated in broilers. Four hundred eighty broilers
(Arbor Acres; 3-wk-old) were randomly assigned to 4 groups. Each
group (120 broiler chickens) was further randomly divided into 6
replicates of 20 chickens. The treatments were control diet without
additives (treatment 1), 250 ppb AFB1 (treatment 2), commercial
yeast, Saccharomyces cerevisiae, (CY 2.5 x 107 CFU/g) + 250 ppb
AFB1 (treatment 3) and bovine yeast, Saccharomyces cerevisiae,
(BY 2.5 x 107 CFU/g + 250 ppb AFB1 (treatment 4). Complete
randomized design (CRD) was used in the experiment. Feed
consumption and body weight were recorded at every five-day
period. On day 42, carcass compositions were determined from 30
birds per treatment. While chicks were sacrificed, 3-4 ml blood
sample was taken and stored frozen at (-20°C) for serum chemical
analysis to determine effects of consumption of diets on blood
chemistry (total protein, albumin, glucose, urea, cholesterol and
triglycerides). There were no significant differences in ADFI among
the treatments(P>0.05). However, BWG, FCR and mortality were
highly significantly different (P
Abstract: Wireless Sensor Networks can be used to monitor the
physical phenomenon in such areas where human approach is nearly
impossible. Hence the limited power supply is the major constraint of
the WSNs due to the use of non-rechargeable batteries in sensor
nodes. A lot of researches are going on to reduce the energy
consumption of sensor nodes. Energy map can be used with
clustering, data dissemination and routing techniques to reduce the
power consumption of WSNs. Energy map can also be used to know
which part of the network is going to fail in near future. In this paper,
Energy map is constructed using the prediction based approach.
Adaptive alpha GM(1,1) model is used as the prediction model.
GM(1,1) is being used worldwide in many applications for predicting
future values of time series using some past values due to its high
computational efficiency and accuracy.
Abstract: From food consumption surveys has been found that potato consumption comparing to other European countries is one of the highest. Hence acrylamide (AA) intake coming from fried potatoes in population might be high as well. The aim of the research was to determine acrylamide content and estimate intake of acrylamide from roasted potatoes bred and cultivated in Latvia. Five common Latvian potato varieties were selected: Lenora, Brasla, Imanta, Zile, and Madara. A two-year research was conducted during two periods: just after harvesting and after six months of storage. Time and temperature (210 ± 5°C) was recorded during frying. AA was extracted from potatoes by solid phase extraction and AA content was determined by LC-MS/MS. estimated intake of acrylamide ranges from 0.012 to 0.496μgkg-1 BW per day.
Abstract: The use of neural networks is popular in various
building applications such as prediction of heating load, ventilation
rate and indoor temperature. Significant is, that only few papers deal
with indoor carbon dioxide (CO2) prediction which is a very good
indicator of indoor air quality (IAQ). In this study, a data-driven
modelling method based on multilayer perceptron network for indoor
air carbon dioxide in an apartment building is developed.
Temperature and humidity measurements are used as input variables
to the network. Motivation for this study derives from the following
issues. First, measuring carbon dioxide is expensive and sensors
power consumptions is high and secondly, this leads to short
operating times of battery-powered sensors. The results show that
predicting CO2 concentration based on relative humidity and
temperature measurements, is difficult. Therefore, more additional
information is needed.
Abstract: The problem of frequent itemset mining is considered in this paper. One new technique proposed to generate frequent patterns in large databases without time-consuming candidate generation. This technique is based on focusing on transaction instead of concentrating on itemset. This algorithm based on take intersection between one transaction and others transaction and the maximum shared items between transactions computed instead of creating itemset and computing their frequency. With applying real life transactions and some consumption is taken from real life data, the significant efficiency acquire from databases in generation association rules mining.
Abstract: As embedded and portable systems were emerged power consumption of circuits had been major challenge. On the other hand latency as determines frequency of circuits is also vital task. Therefore, trade off between both of them will be desirable. Modulo 2n+1 adders are important part of the residue number system (RNS) based arithmetic units with the interesting moduli set (2n-1,2n, 2n+1). In this manuscript we have introduced novel binary representation to the design of modulo 2n+1 adder. VLSI realization of proposed architecture under 180 nm full static CMOS technology reveals its superiority in terms of area, power consumption and power-delay product (PDP) against several peer existing structures.
Abstract: Hydrogen is considered to be the most promising
candidate as a future energy carrier. One of the most used
technologies for the electrolytic hydrogen production is alkaline
water electrolysis. However, due to the high energy requirements, the
cost of hydrogen produced in such a way is high. In continuous
search to improve this process using advanced electrocatalytic
materials for the hydrogen evolution reaction (HER), Ni type Raney
and macro-porous Ni-Co electrodes were prepared on AISI 304
stainless steel substrates by electrodeposition. The developed
electrodes were characterized by SEM and confocal laser scanning
microscopy. HER on these electrodes was evaluated in 30 wt.% KOH
solution by means of hydrogen discharge curves and galvanostatic
tests. Results show that the developed electrodes present a most
efficient behaviour for HER when comparing with the smooth Ni
cathode. It has been reported a reduction in the energy consumption
of the electrolysis cell of about 25% by using the developed coatings
as cathodes.
Abstract: The convergence of heterogeneous wireless access technologies characterizes the 4G wireless networks. In such converged systems, the seamless and efficient handoff between
different access technologies (vertical handoff) is essential and remains a challenging problem. The heterogeneous co-existence of access technologies with largely different characteristics creates a decision problem of determining the “best" available network at
“best" time to reduce the unnecessary handoffs. This paper proposes a dynamic decision model to decide the “best" network at “best"
time moment to handoffs. The proposed dynamic decision model make the right vertical handoff decisions by determining the “best"
network at “best" time among available networks based on, dynamic
factors such as “Received Signal Strength(RSS)" of network and
“velocity" of mobile station simultaneously with static factors like Usage Expense, Link capacity(offered bandwidth) and power
consumption. This model not only meets the individual user needs but also improve the whole system performance by reducing the unnecessary handoffs.
Abstract: At present, the severe oil crisis and greenhouse effect are booming, which is a growing worry for China. Over a long period of study, choosing the development of biological diesel is a feasible way in the desertification region in China. With considering the adaptability of Micro-algae in desertification region and analyzing energy consumption and carbon calculations of Micro-algae biodiesel produced by JJ company , this paper, make the microalgae our optimal choice to develop biological diesel in china's desertification region.
Abstract: Consumer behaviour analysis represents an important
field of study in marketing. Particularly strategy development for
marketing and communications will be more focused and effective
when marketers have an understanding of the motivations, behaviour
and psychology of consumers. While materialism has been found to
be one of the important elements in consumer behaviour, compulsive
consumption represents another aspect that has recently attracted
more attention. This is because of the growing prevalence of
dysfunctional buying that has raised concern in consumer societies.
Present studies and analyses on origins and motivations of
compulsive buying have mainly focused on either individual factors
or groups of related factors and hence a need for a holistic view
exists. This paper provides a comprehensive perspective on
compulsive consumption and establishes relevant propositions
keeping the family life cycle stages as a reference for the incidence of
chronic consumer states and their influence on compulsive
consumption.
Abstract: This paper presents two prototypes of low power low voltage current mode 9 bit pipelined a/d converters. The first and the second converters are configured of 1.5 bit and 2.5 bit stages, respectively. The a/d converter structures are composed of current mode building blocks and final comparator block which converts the analog current signal into digital voltage signal. All building blocks have been designed in CMOS AMS 0.35μm technology, then simulated to verify proposed concept. The performances of both converters are compared to performances of known current mode and voltage mode switched capacitance converter structures. Low power consumption and small chip area are advantages of the proposed converters.
Abstract: Changing in consumers lifestyles and food
consumption patterns provide a great opportunity in developing the
functional food sector in Malaysia. There is only a little knowledge
about whether Malaysian consumers are aware of functional food and
if so what image consumers have of this product. The objective of
this research is to determine the extent to which selected socioeconomic
characteristics and attitudes influence consumers-
awareness of functional food. A survey was conducted in the Klang
Valley, Malaysia where 439 respondents were interviewed using a
structured questionnaire. The result shows that most respondents
have a positive attitude towards functional food. For the binary
logistic estimation, the results indicate that age, income and other
factors such as concern about food safety, subscribing to cooking or
health magazines, being a vegetarian and consumers who have been
involved in a food production company significantly influence
Malaysian consumers- awareness towards functional food.
Abstract: Technology transfer of renewable energy technologies is very often unsuccessful in the developing world. Aside from challenges that have social, economic, financial, institutional and environmental dimensions, technology transfer has generally been misunderstood, and largely seen as mere delivery of high tech equipment from developed to developing countries or within the developing world from R&D institutions to society. Technology transfer entails much more, including, but not limited to: entire systems and their component parts, know-how, goods and services, equipment, and organisational and managerial procedures. Means to facilitate the successful transfer of energy technologies, including the sharing of lessons are subsequently extremely important for developing countries as they grapple with increasing energy needs to sustain adequate economic growth and development. Improving the success of technology transfer is an ongoing process as more projects are implemented, new problems are encountered and new lessons are learnt. Renewable energy is also critical to improve the quality of lives of the majority of people in developing countries. In rural areas energy is primarily traditional biomass. The consumption activities typically occur in an inefficient manner, thus working against the notion of sustainable development. This paper explores the implementation of technology transfer in the developing world (sub-Saharan Africa). The focus is necessarily on RETs since most rural energy initiatives are RETs-based. Additionally, it aims to highlight some lessons drawn from the cited RE projects and identifies notable differences where energy technology transfer was judged to be successful. This is done through a literature review based on a selection of documented case studies which are judged against the definition provided for technology transfer. This paper also puts forth research recommendations that might contribute to improved technology transfer in the developing world. Key findings of this paper include: Technology transfer cannot be complete without satisfying pre-conditions such as: affordability, maintenance (and associated plans), knowledge and skills transfer, appropriate know how, ownership and commitment, ability to adapt technology, sound business principles such as financial viability and sustainability, project management, relevance and many others. It is also shown that lessons are learnt in both successful and unsuccessful projects.
Abstract: Routing in MANET is extremely challenging because
of MANETs dynamic features, its limited bandwidth, frequent
topology changes caused by node mobility and power energy
consumption. In order to efficiently transmit data to destinations, the
applicable routing algorithms must be implemented in mobile ad-hoc
networks. Thus we can increase the efficiency of the routing by
satisfying the Quality of Service (QoS) parameters by developing
routing algorithms for MANETs. The algorithms that are inspired by
the principles of natural biological evolution and distributed
collective behavior of social colonies have shown excellence in
dealing with complex optimization problems and are becoming more
popular. This paper presents a survey on few meta-heuristic
algorithms and naturally-inspired algorithms.