Abstract: A new reverse phase-high performance liquid chromatography (RP-HPLC) method with fluorescent detector (FLD) was developed and optimized for Norfloxacin determination in human plasma. Mobile phase specifications, extraction method and excitation and emission wavelengths were varied for optimization. HPLC system contained a reverse phase C18 (5 μm, 4.6 mm×150 mm) column with FLD operated at excitation 330 nm and emission 440 nm. The optimized mobile phase consisted of 14% acetonitrile in buffer solution. The aqueous phase was prepared by mixing 2g of citric acid, 2g sodium acetate and 1 ml of triethylamine in 1 L of Milli-Q water was run at a flow rate of 1.2 mL/min. The standard curve was linear for the range tested (0.156–20 μg/mL) and the coefficient of determination was 0.9978. Aceclofenac sodium was used as internal standard. A detection limit of 0.078 μg/mL was achieved. Run time was set at 10 minutes because retention time of norfloxacin was 0.99 min. which shows the rapidness of this method of analysis. The present assay showed good accuracy, precision and sensitivity for Norfloxacin determination in human plasma with a new internal standard and can be applied pharmacokinetic evaluation of Norfloxacin tablets after oral administration in human.
Abstract: In this study, an inland metropolitan area, Gwangju, in Korea was selected to assess the amplification potential of earthquake motion and provide the information for regional seismic countermeasure. A geographic information system-based expert system was implemented for reliably predicting the spatial geotechnical layers in the entire region of interesting by building a geo-knowledge database. Particularly, the database consists of the existing boring data gathered from the prior geotechnical projects and the surface geo-knowledge data acquired from the site visit. For practical application of the geo-knowledge database to estimate the earthquake hazard potential related to site amplification effects at the study area, seismic zoning maps on geotechnical parameters, such as the bedrock depth and the site period, were created within GIS framework. In addition, seismic zonation of site classification was also performed to determine the site amplification coefficients for seismic design at any site in the study area. KeywordsEarthquake hazard, geo-knowledge, geographic information system, seismic zonation, site period.
Abstract: Water level forecasting using records of past time series is of importance in water resources engineering and management. For example, water level affects groundwater tables in low-lying coastal areas, as well as hydrological regimes of some coastal rivers. Then, a reliable prediction of sea-level variations is required in coastal engineering and hydrologic studies. During the past two decades, the approaches based on the Genetic Programming (GP) and Artificial Neural Networks (ANN) were developed. In the present study, the GP is used to forecast daily water level variations for a set of time intervals using observed water levels. The measurements from a single tide gauge at Urmia Lake, Northwest Iran, were used to train and validate the GP approach for the period from January 1997 to July 2008. Statistics, the root mean square error and correlation coefficient, are used to verify model by comparing with a corresponding outputs from Artificial Neural Network model. The results show that both these artificial intelligence methodologies are satisfactory and can be considered as alternatives to the conventional harmonic analysis.
Abstract: In this paper, an optimal design of linear phase digital
high pass finite impulse response (FIR) filter using Particle Swarm
Optimization with Constriction Factor and Inertia Weight Approach
(PSO-CFIWA) has been presented. In the design process, the filter
length, pass band and stop band frequencies, feasible pass band and
stop band ripple sizes are specified. FIR filter design is a multi-modal
optimization problem. The conventional gradient based optimization
techniques are not efficient for digital filter design. Given the filter
specifications to be realized, the PSO-CFIWA algorithm generates a
set of optimal filter coefficients and tries to meet the ideal frequency
response characteristic. In this paper, for the given problem, the
designs of the optimal FIR high pass filters of different orders have
been performed. The simulation results have been compared to those
obtained by the well accepted algorithms such as Parks and
McClellan algorithm (PM), genetic algorithm (GA). The results
justify that the proposed optimal filter design approach using PSOCFIWA
outperforms PM and GA, not only in the accuracy of the
designed filter but also in the convergence speed and solution
quality.
Abstract: Exposure to ambient air pollution has been linked to a
number of health outcomes, starting from modest transient changes in
the respiratory tract and impaired pulmonary function, continuing to
restrict activity/reduce performance and to the increase emergency
rooms visits, hospital admissions or mortality. The increase of
allergenic symptoms has been associated with air contaminants such
as ozone, particulate matter, fungal spores and pollen.
Considering the potential relevance of crossed effects of nonbiological
pollutants and airborne pollens and fungal spores on
allergy worsening, the aim of this work was to evaluate the influence
of non-biological pollutants (O3 and PM10) and meteorological
parameters on the concentrations of pollen and fungal spores using
multiple linear regressions.
The data considered in this study were collected in Oporto which
is the second largest Portuguese city, located in the North. Daily
mean of O3, PM10, pollen and fungal spore concentrations,
temperature, relative humidity, precipitation, wind velocity, pollen
and fungal spore concentrations, for 2003, 2004 and 2005 were
considered. Results showed that the 90th percentile of the adjusted
coefficient of determination, P90 (R2aj), of the multiple regressions
varied from 0.613 to 0.916 for pollen and from 0.275 to 0.512 for
fungal spores. O3 and PM10 showed to have some influence on the
biological pollutants. Among the meteorological parameters
analysed, temperature was the one that most influenced the pollen
and fungal spores airborne concentrations. Relative humidity also
showed to have some influence on the fungal spore dispersion.
Nevertheless, the models for each pollen and fungal spore were
different depending on the analysed period, which means that the
correlations identified as statistically significant can not be, even so,
consistent enough.
Abstract: One of the major parts of a jet engine is air intake,
which provides proper and required amount of air for the engine to
operate. There are several aerodynamic parameters which should be
considered in design, such as distortion, pressure recovery, etc. In
this research, the effects of lip ice accretion on pitot intake
performance are investigated. For ice accretion phenomenon, two
supervised multilayer neural networks (ANN) are designed, one for
ice shape prediction and another one for ice roughness estimation
based on experimental data. The Fourier coefficients of transformed
ice shape and parameters include velocity, liquid water content
(LWC), median volumetric diameter (MVD), spray time and
temperature are used in neural network training. Then, the subsonic
intake flow field is simulated numerically using 2D Navier-Stokes
equations and Finite Volume approach with Hybrid mesh includes
structured and unstructured meshes. The results are obtained in
different angles of attack and the variations of intake aerodynamic
parameters due to icing phenomenon are discussed. The results show
noticeable effects of ice accretion phenomenon on intake behavior.
Abstract: A numerical prediction of flow in a tube bank is reported. The flow regimes considered cover a wide range of Reynolds numbers, which range from 380 to 99000 and which are equivalent to a range of inlet velocities from very low (0.072 m/s) to very high (60 m/s). In this study, calculations were made using the standard k-e model with standard wall function. The drag coefficient, skin friction drag, pressure drag, and pressure distribution around a tube were investigated. As the velocity increased, the drag coefficient decreased until the velocity exceeded 45 m/s, after which it increased. Furthermore, the pressure drag and skin friction drag depend on the velocity.
Abstract: The study aimed to investigate characteristics of
vegetative tissue for taxonomic purpose and possibly trend of waste
application in industry. Stems and branches of 15 species in Solanum
found in Thailand were prepared for fiber and examined by light
microscopy. Microstructural characteristic data of fiber i.e. fiber
length and width, fiber lumen diameter and fiber cell wall thickness
were recorded. The longest average fiber cell length (>3.9 mm.) were
obtained in S. lycopersicum L. and S. tuberosum L. Fiber cells from
S. lycopersicum also revealed the widest average diameter of whole
cell and its lumen at >45.5 μm and >29 μm respectively. However
fiber cells with thickest wall of > 9.6 μm were belonged to the
ornamental tree species, S. wrightii Benth. The results showed that
the slenderness ratio, Runkel ratio, and flexibility coefficient, with
potentially suitable for feedstock in paper industry fell in 4 exotic
species, i.e. Solanumamericanum L., S. lycopersicum, S.
seaforthianum Andr., and S. tuberosum L
Abstract: Image compression can improve the performance of
the digital systems by reducing time and cost in image storage
and transmission without significant reduction of the image quality.
Furthermore, the discrete cosine transform has emerged as the new
state-of-the art standard for image compression. In this paper, a
hybrid image compression technique based on reversible blockade
transform coding is proposed. The technique, implemented over
regions of interest (ROIs), is based on selection of the coefficients
that belong to different transforms, depending on the coefficients is
proposed. This method allows: (1) codification of multiple kernals
at various degrees of interest, (2) arbitrary shaped spectrum,and (3)
flexible adjustment of the compression quality of the image and the
background. No standard modification for JPEG2000 decoder was
required. The method was applied over different types of images.
Results show a better performance for the selected regions, when
image coding methods were employed for the whole set of images.
We believe that this method is an excellent tool for future image
compression research, mainly on images where image coding can
be of interest, such as the medical imaging modalities and several
multimedia applications. Finally VLSI implementation of proposed
method is shown. It is also shown that the kernal of Hartley and
Cosine transform gives the better performance than any other model.
Abstract: TiO2/Ag composite films were prepared by
incorporating Ag in the pores of mesoporous TiO2 films using a
photoreduction method. The Ag nanoparticle sizes were in a range of
3.66-38.56 nm. The TiO2/Ag composite films were characterized by
X-ray diffraction (XRD), scanning electron microscopy (SEM) and
transmission electron microscropy (TEM). The TiO2 films and
TiO2/Ag composite films were immersed in a 0.3 mM N719 dye
solution and characterized by UV-Vis spectrophotometer. The
TiO2/Ag/N719 composite film showed that an optimal size of Ag
nanoparticles was 19.12 nm and, hence, gave the maximum optical
absorption spectra. The improved absorption was due to surface
plasmon resonance induced by the Ag nanoparticles to enhance the
absorption coefficient of the dye.
Abstract: The objective of this research was to investigate biodegradation of water hyacinth (Eichhornia crassipes) to produce bioethanol using dilute-acid pretreatment (1% sulfuric acid) results in high hemicellulose decomposition and using yeast (Pachysolen tannophilus) as bioethanol producing strain. A maximum ethanol yield of 1.14g/L with coefficient, 0.24g g-1; productivity, 0.015g l-1h-1 was comparable to predicted value 32.05g/L obtained by Central Composite Design (CCD). Maximum ethanol yield coefficient was comparable to those obtained through enzymatic saccharification and fermentation of acid hydrolysate using fully equipped fermentor. Although maximum ethanol concentration was low in lab scale, the improvement of lignocellulosic ethanol yield is necessary for large scale production.
Abstract: Series of experimental tests were conducted on a
section of a 660 kW wind turbine blade to measure the pressure
distribution of this model oscillating in plunging motion. In order to
minimize the amount of data required to predict aerodynamic loads
of the airfoil, a General Regression Neural Network, GRNN, was
trained using the measured experimental data. The network once
proved to be accurate enough, was used to predict the flow behavior
of the airfoil for the desired conditions.
Results showed that with using a few of the acquired data, the
trained neural network was able to predict accurate results with
minimal errors when compared with the corresponding measured
values. Therefore with employing this trained network the
aerodynamic coefficients of the plunging airfoil, are predicted
accurately at different oscillation frequencies, amplitudes, and angles
of attack; hence reducing the cost of tests while achieving acceptable
accuracy.
Abstract: Psoriasis is a chronic inflammatory skin condition
which affects 2-3% of population around the world. Psoriasis Area
and Severity Index (PASI) is a gold standard to assess psoriasis
severity as well as the treatment efficacy. Although a gold standard,
PASI is rarely used because it is tedious and complex. In practice,
PASI score is determined subjectively by dermatologists, therefore
inter and intra variations of assessment are possible to happen even
among expert dermatologists. This research develops an algorithm to
assess psoriasis lesion for PASI scoring objectively. Focus of this
research is thickness assessment as one of PASI four parameters
beside area, erythema and scaliness. Psoriasis lesion thickness is
measured by averaging the total elevation from lesion base to lesion
surface. Thickness values of 122 3D images taken from 39 patients
are grouped into 4 PASI thickness score using K-means clustering.
Validation on lesion base construction is performed using twelve
body curvature models and show good result with coefficient of
determinant (R2) is equal to 1.
Abstract: Rounding of coefficients is a common practice in
hardware implementation of digital filters. Where some coefficients
are very close to zero or one, as assumed in this paper, this rounding
action also leads to some computation reduction. Furthermore, if the
discarded coefficient is of high order, a reduced order filter is
obtained, otherwise the order does not change but computation is
reduced. In this paper, the Least Squares approximation to rounded
(or discarded) coefficient FIR filter is investigated. The result also
succinctly extended to general type of FIR filters.
Abstract: Image compression plays a vital role in today-s
communication. The limitation in allocated bandwidth leads to
slower communication. To exchange the rate of transmission in the
limited bandwidth the Image data must be compressed before
transmission. Basically there are two types of compressions, 1)
LOSSY compression and 2) LOSSLESS compression. Lossy
compression though gives more compression compared to lossless
compression; the accuracy in retrievation is less in case of lossy
compression as compared to lossless compression. JPEG, JPEG2000
image compression system follows huffman coding for image
compression. JPEG 2000 coding system use wavelet transform,
which decompose the image into different levels, where the
coefficient in each sub band are uncorrelated from coefficient of
other sub bands. Embedded Zero tree wavelet (EZW) coding exploits
the multi-resolution properties of the wavelet transform to give a
computationally simple algorithm with better performance compared
to existing wavelet transforms. For further improvement of
compression applications other coding methods were recently been
suggested. An ANN base approach is one such method. Artificial
Neural Network has been applied to many problems in image
processing and has demonstrated their superiority over classical
methods when dealing with noisy or incomplete data for image
compression applications. The performance analysis of different
images is proposed with an analysis of EZW coding system with
Error Backpropagation algorithm. The implementation and analysis
shows approximately 30% more accuracy in retrieved image
compare to the existing EZW coding system.
Abstract: In high bitrate information hiding techniques, 1 bit is
embedded within each 4 x 4 Discrete Cosine Transform (DCT)
coefficient block by means of vector quantization, then the hidden bit
can be effectively extracted in terminal end. In this paper high bitrate
information hiding algorithms are summarized, and the scheme of
video in video is implemented. Experimental result shows that the host
video which is embedded numerous auxiliary information have little
visually quality decline. Peak Signal to Noise Ratio (PSNR)Y of host
video only degrades 0.22dB in average, while the hidden information
has a high percentage of survives and keeps a high robustness in
H.264/AVC compression, the average Bit Error Rate(BER) of hiding
information is 0.015%.
Abstract: Three novel and significant contributions are made in
this paper Firstly, non-recursive formulation of Haar connection
coefficients, pioneered by the present authors is presented, which
can be computed very efficiently and avoid stack and memory
overflows. Secondly, the generalized approach for state analysis of
singular bilinear time-invariant (TI) and time-varying (TV) systems
is presented; vis-˜a-vis diversified and complex works reported by
different authors. Thirdly, a generalized approach for parameter
estimation of bilinear TI and TV systems is also proposed. The unified
framework of the proposed method is very significant in that the
digital hardware once-designed can be used to perform the complex
tasks of state analysis and parameter estimation of different types
of bilinear systems single-handedly. The simplicity, effectiveness and
generalized nature of the proposed method is established by applying
it to different types of bilinear systems for the two tasks.
Abstract: In the paper we discuss the influence of the route
flexibility degree, the open rate of operations and the production type
coefficient on makespan. The flexible job-open shop scheduling
problem FJOSP (an extension of the classical job shop scheduling) is
analyzed. For the analysis of the production process we used a
hybrid heuristic of the GRASP (greedy randomized adaptive search
procedure) with simulated annealing algorithm. Experiments with
different levels of factors have been considered and compared. The
GRASP+SA algorithm has been tested and illustrated with results for
the serial route and the parallel one.
Abstract: Composite pins of rubber dust collected from tyre
retreading centres of trucks, cars and buses etc.and epoxy with
weight percentages of 10. 15, and 20 % of rubber (weight fractions of
9, 13 and 17 % respectively) have been prepared in house with the
help of a split wooden mould. The pins were tested in a pin-on-disc
wear monitor to determine the co-efficient of friction and weight
losses with varying speeds, loads and time. The wear volume and
wear rates have also been found out for all these three specimens.. It
is observed that all the specimens have exhibited very low coefficient
of friction and low wear rates under dry sliding condition. Out of the
above three samples tested, the specimen with 10 % rubber dust by
weight has shown lowest wear rates. However a peculiar result i.e
decreasing trend has been obtained with 20% reinforcement of rubber
in epoxy while rubbed against steel at varying speeds. This might
have occurred due to high surface finish of the disc and formation of
a thin transfer layer from the composite
Abstract: Researches show that probability-statistical methods application, especially at the early stage of the aviation Gas Turbine Engine (GTE) technical condition diagnosing, when the flight information has property of the fuzzy, limitation and uncertainty is unfounded. Hence the efficiency of application of new technology Soft Computing at these diagnosing stages with the using of the Fuzzy Logic and Neural Networks methods is considered. According to the purpose of this problem training with high accuracy of fuzzy multiple linear and non-linear models (fuzzy regression equations) which received on the statistical fuzzy data basis is made. For GTE technical condition more adequate model making dynamics of skewness and kurtosis coefficients- changes are analysed. Researches of skewness and kurtosis coefficients values- changes show that, distributions of GTE work parameters have fuzzy character. Hence consideration of fuzzy skewness and kurtosis coefficients is expedient. Investigation of the basic characteristics changes- dynamics of GTE work parameters allows drawing conclusion on necessity of the Fuzzy Statistical Analysis at preliminary identification of the engines' technical condition. Researches of correlation coefficients values- changes shows also on their fuzzy character. Therefore for models choice the application of the Fuzzy Correlation Analysis results is offered. At the information sufficiency is offered to use recurrent algorithm of aviation GTE technical condition identification (Hard Computing technology is used) on measurements of input and output parameters of the multiple linear and non-linear generalised models at presence of noise measured (the new recursive Least Squares Method (LSM)). The developed GTE condition monitoring system provides stageby- stage estimation of engine technical conditions. As application of the given technique the estimation of the new operating aviation engine technical condition was made.