Abstract: The pollution of sediments sampled from the North
Port by polycyclic aromatic hydrocarbons (PAHs) was investigated.
Concentrations of PAHs estimated in the port sediments ranged from
199 to 2851.2 μg/kg dw. The highest concentration was found which
is closed to the Berth line, this locations affected by intensive
shipping activities and Land based runoff and they were dominated
by the high molecular weight PAHs (4–6- rings). Source
identification showed that PAHs originated mostly from the
pyrogenic source either from the combustion of fossil fuels, grass,
wood and coal (majority of the samples). Ecological Risk Assessment
on the port sediments presented that slightly adverse ecological
effects to biological community are expected to occur at the vicinity
of the stations 1 and 4. Thus PAHs are not considered as pollutants of
concern in the North Port.
Abstract: This paper presents a new adaptive impedance control
strategy, based on Function Approximation Technique (FAT) to
compensate for unknown non-flat environment shape or time-varying
environment location. The target impedance in the force controllable
direction is modified by incorporating adaptive compensators and the
uncertainties are represented by FAT, allowing the update law to be
derived easily. The force error feedback is utilized in the estimation
and the accurate knowledge of the environment parameters are not
required by the algorithm. It is shown mathematically that the
stability of the controller is guaranteed based on Lyapunov theory.
Simulation results presented to demonstrate the validity of the
proposed controller.
Abstract: Heterogeneity has to be taken into account when
integrating a set of existing information sources into a distributed
information system that are nowadays often based on Service-
Oriented Architectures (SOA). This is also particularly applicable to
distributed services such as event monitoring, which are useful in the
context of Event Driven Architectures (EDA) and Complex Event
Processing (CEP). Web services deal with this heterogeneity at a
technical level, also providing little support for event processing. Our
central thesis is that such a fully generic solution cannot provide
complete support for event monitoring; instead, source specific
semantics such as certain event types or support for certain event
monitoring techniques have to be taken into account. Our core result
is the design of a configurable event monitoring (Web) service that
allows us to trade genericity for the exploitation of source specific
characteristics. It thus delivers results for the areas of SOA, Web
services, CEP and EDA.
Abstract: Genetic Folding (GF) a new class of EA named as is
introduced for the first time. It is based on chromosomes composed
of floating genes structurally organized in a parent form and
separated by dots. Although, the genotype/phenotype system of GF
generates a kernel expression, which is the objective function of
superior classifier. In this work the question of the satisfying
mapping-s rules in evolving populations is addressed by analyzing
populations undergoing either Mercer-s or none Mercer-s rule. The
results presented here show that populations undergoing Mercer-s
rules improve practically models selection of Support Vector
Machine (SVM). The experiment is trained multi-classification
problem and tested on nonlinear Ionosphere dataset. The target of this
paper is to answer the question of evolving Mercer-s rule in SVM
addressed using either genetic folding satisfied kernel-s rules or not
applied to complicated domains and problems.
Abstract: In this work we evaluate the possibility of predicting
the emotional state of a person based on the EEG. We investigate
the problem of classifying valence from EEG signals during
the presentation of affective pictures, utilizing the "frontal EEG
asymmetry" phenomenon. To distinguish positive and negative
emotions, we applied the Common Spatial Patterns algorithm.
In contrast to our expectations, the affective pictures did not
reliably elicit changes in frontal asymmetry. The classifying task
thereby becomes very hard as reflected by the poor classifier
performance. We suspect that the masking of the source of the
brain activity related to emotions, coming mostly from deeper
structures in the brain, and the insufficient emotional engagement
are among main reasons why it is difficult to predict the emotional
state of a person.
Abstract: Sarkhoon gas plant, located in south of Iran, has been installed to removal H2S contained in a high pressure natural gas stream. The solvent used for the H2S removal from gaseous stream is 34% by weight (wt%) Di-ethanol amine (DEA) solutions. Due to increasing concentration of heat stable salt (HSS) in solvent, corrosivity of amine solution had been increased. Reports indicated that there was corrosion on the shell of regeneration column. Because source formation of HSS was unknown, we decided to control the amount of HSS at the limit less than 3% wt amine solvent. Therefore, two small columns were filled by strong anionic base and carbon active, and then polluted amine was passed through beds. Finally a temporary amine recovery package on industrial scale was made based on laboratory’s results. From economical point of view we could save $700000 beside corrosion occurrence of the stripping column has been vigorously decreased.
Abstract: Because of the reservoir effect, dynamic analysis of concrete dams is more involved than other common structures. This problem is mostly sourced by the differences between reservoir water, dam body and foundation material behaviors. To account for the reservoir effect in dynamic analysis of concrete gravity dams, two methods are generally employed. Eulerian method in reservoir modeling gives rise to a set of coupled equations, whereas in Lagrangian method, the same equations for dam and foundation structure are used. The Purpose of this paper is to evaluate and study possible advantages and disadvantages of both methods. Specifically, application of the above methods in the analysis of dam-foundationreservoir systems is leveraged to calculate the hydrodynamic pressure on dam faces. Within the frame work of dam- foundationreservoir systems, dam displacement under earthquake for various dimensions and characteristics are also studied. The results of both Lagrangian and Eulerian methods in effects of loading frequency, boundary condition and foundation elasticity modulus are quantitatively evaluated and compared. Our analyses show that each method has individual advantages and disadvantages. As such, in any particular case, one of the two methods may prove more suitable as presented in the results section of this study.
Abstract: The internet has become an attractive avenue for
global e-business, e-learning, knowledge sharing, etc. Due to
continuous increase in the volume of web content, it is not practically
possible for a user to extract information by browsing and integrating
data from a huge amount of web sources retrieved by the existing
search engines. The semantic web technology enables advancement
in information extraction by providing a suite of tools to integrate
data from different sources. To take full advantage of semantic web,
it is necessary to annotate existing web pages into semantic web
pages. This research develops a tool, named OWIE (Ontology-based
Web Information Extraction), for semantic web annotation using
domain specific ontologies. The tool automatically extracts
information from html pages with the help of pre-defined ontologies
and gives them semantic representation. Two case studies have been
conducted to analyze the accuracy of OWIE.
Abstract: This study aims at using multi-source data to monitor
coral biodiversity and coral bleaching. We used coral reef at Racha
Islands, Phuket as a study area. There were three sources of data:
coral diversity, sensor based data and satellite data.
Abstract: In this paper we present an approach for 3D face
recognition based on extracting principal components of range
images by utilizing modified PCA methods namely 2DPCA and
bidirectional 2DPCA also known as (2D) 2 PCA.A preprocessing
stage was implemented on the images to smooth them using median
and Gaussian filtering. In the normalization stage we locate the nose
tip to lay it at the center of images then crop each image to a standard
size of 100*100. In the face recognition stage we extract the principal
component of each image using both 2DPCA and (2D) 2 PCA.
Finally, we use Euclidean distance to measure the minimum distance
between a given test image to the training images in the database. We
also compare the result of using both methods. The best result
achieved by experiments on a public face database shows that 83.3
percent is the rate of face recognition for a random facial expression.
Abstract: The tagging data of (users, tags and resources) constitutes a folksonomy that is the user-driven and bottom-up approach to organizing and classifying information on the Web. Tagging data stored in the folksonomy include a lot of very useful information and knowledge. However, appropriate approach for analyzing tagging data and discovering hidden knowledge from them still remains one of the main problems on the folksonomy mining researches. In this paper, we have proposed a folksonomy data mining approach based on FCA for discovering hidden knowledge easily from folksonomy. Also we have demonstrated how our proposed approach can be applied in the collaborative tagging system through our experiment. Our proposed approach can be applied to some interesting areas such as social network analysis, semantic web mining and so on.
Abstract: CIM is the standard formalism for modeling management
information developed by the Distributed Management Task
Force (DMTF) in the context of its WBEM proposal, designed to
provide a conceptual view of the managed environment. In this
paper, we propose the inclusion of formal knowledge representation
techniques, based on Description Logics (DLs) and the Web Ontology
Language (OWL), in CIM-based conceptual modeling, and then we
examine the benefits of such a decision. The proposal is specified as a
CIM metamodel level mapping to a highly expressive subset of DLs
capable of capturing all the semantics of the models. The paper shows
how the proposed mapping can be used for automatic reasoning
about the management information models, as a design aid, by means
of new-generation CASE tools, thanks to the use of state-of-the-art
automatic reasoning systems that support the proposed logic and use
algorithms that are sound and complete with respect to the semantics.
Such a CASE tool framework has been developed by the authors and
its architecture is also introduced. The proposed formalization is not
only useful at design time, but also at run time through the use of
rational autonomous agents, in response to a need recently recognized
by the DMTF.
Abstract: According to the governmental data, the cases of oral
cancers doubled in the past 10 years. This had brought heavy burden to
the patients- family, the society, and the country. The literature
generally evidenced the betel nut contained particular chemicals that
can cause oral cancers. Research in Taiwan had also proofed that 90
percent of oral cancer patients had experience of betel nut chewing. It
is thus important to educate the betel-nut hobbyists to cease such a
hazardous behavior. A program was then organized to establish
several training classes across different areas specific to help ceasing
this particular habit. Purpose of this research was to explore the
attitude and intention toward ceasing betel-nut chewing before and
after attending the training classes. 50 samples were taken from a
ceasing class with average age at 45 years old with high school
education (54%). 74% of the respondents were male in service or
agricultural industries. Experiences in betel-nut chewing were 5-20
years with a dose of 1-20 pieces per day. The data had shown that 60%
of the respondents had cigarette smoking habit, and 30% of the
respondents were concurrently alcoholic dependent. Research results
indicated that the attitude, intentions, and the knowledge on oral
cancers were found significant different between before and after
attendance. This provided evidence for the effectiveness of the training
class. However, we do not perform follow-up after the class.
Noteworthy is the test result also shown that participants who were
drivers as occupation, or habitual smokers or alcoholic dependents
would be less willing to quit the betel-nut chewing. The test results
indicated as well that the educational levels and the type of occupation
may have significant impacts on an individual-s decisions in taking
betel-nut or substance abuse.
Abstract: The cDNA encoding the 326 amino acids of a Class I
basic chitinase gene from Leucaena leucocephala de Wit (KB3,
Genbank accession: AAM49597) was cloned under the control of
CaMV35S promoter in pCAMBIA 1300 and transferred to
Koshihikari. Calli of Koshihikari rice was transformed with
agrobacterium with this construct expressing the chitinase and β-
glucouronidase (GUS). The frequencies of calli 90 % has been
obtained from rice seedlings cultured on NB medium. The high
regeneration frequencies, 74% was obtained from calli cultured on
regeneration medium containing 4 mg/l BAP, and 7 g/l phytagel at
25°C. Various factors were studied in order to establish a procedure
for the transformation of Koshihikari Agrobacterium tumefaciens.
Supplementation of 50 mM acetosyringone to the medium during
coculivation was important to enhance the frequency to transient
transformation. The 4 week-old scutellum-derived calli were
excellent starting materials. Selection medium based on NB medium
supplement with 40 mg/l hygromycin and 400 mg/l cefotaxime were
an optimized medium for selection of transformed rice calli. The
percentage of transformation 70 was obtained. Recombinant calli and
regenerated rice plants were checked the expression of chitinase and
gus by PCR, northern blot gel, southern blot gel, and gus assay.
Chitinase and gus were expressed in all parts of recombinant rice.
The rice line expressing the KB3 chiitnase was more resistant to the
blast fungus Fusarium monoliforme than control line.
Abstract: The avian phytohaemagglutinin skin test is being
proved as an in vivo system for the evaluation an avian in vivo T cell
mitogenicity. The test system was one week old Gallus domesticus
broiler Chickens. Five replicates were done for each of the whole,
1:10 dilutions of each of 0.05 IU tuberculin, tetanus immunoglobulin
and DPT vaccine as test materials. The evaluation parameters were
the skin indurations and lymphoblast percentages in bone marrow
lymphocytes.
Tuberculin indurations were 2.06 and 1.26mm for 0.05 IU
respectively while lymphoblast percent were 0.234 and 0.1
accordingly.
The skin indurations of 135mg/ml and 1.35mg/ml tetanus
immunoglobulin were 4.86 and 3.96mm while lymphoblast
percentages were 0.3 and 0.14 respectively.
The whole DPT and 1:10 concentration were with 4.5 and 3.2mm
while their lymphoblast percentages were 0.28 and 0.12 accordingly.
Thus the mitogenicity of the test materials was of dependant type.
Abstract: This paper presents a compact thermoelectric power generator system based on temperature difference across the element. The system can transfer the burning heat energy to electric energy directly. The proposed system has a thermoelectric generator and a power control box. In the generator, there are 4 thermoelectric modules (TEMs), each of which uses 2 thermoelectric chips (TEs) and 2 cold sinks, 1 thermal absorber, and 1 thermal conduction flat board. In the power control box, there are 1 storing energy device, 1 converter, and 1 inverter. The total net generating power is about 11W. This system uses commercial portable gas stoves or burns timber or the coal as the heat source, which is easily obtained. It adopts solid-state thermoelectric chips as heat inverter parts. The system has the advantages of being light-weight, quite, and mobile, requiring no maintenance, and havng easily-supplied heat source. The system can be used a as long as burning is allowed. This system works well for highly-mobilized outdoors situations by providing a power for illumination, entertainment equipment or the wireless equipment at refuge. Under heavy storms such as typhoon, when the solar panels become ineffective and the wind-powered machines malfunction, the thermoelectric power generator can continue providing the vital power.
Abstract: An optical fiber Fabry-Perot interferometer (FFPI) is
proposed and demonstrated for dynamic measurements in a
mechanical vibrating target. A polishing metal with a low reflectance
value adhered to a mechanical vibrator was excited via a function
generator at various excitation frequencies. Output interference
fringes were generated by modulating the reference and sensing
signal at the output arm. A fringe-counting technique was used for
interpreting the displacement information on the dedicated computer.
The fiber interferometer has been found the capability of the
displacement measurements of 1.28 μm – 96.01 μm. A commercial
displacement sensor was employed as a reference sensor for
investigating the measurement errors from the fiber sensor. A
maximum percentage measurement error of approximately 1.59 %
was obtained.
Abstract: Software Development Risks Identification (SDRI),
using Fault Tree Analysis (FTA), is a proposed technique to identify
not only the risk factors but also the causes of the appearance of the
risk factors in software development life cycle. The method is based
on analyzing the probable causes of software development failures
before they become problems and adversely affect a project. It uses
Fault tree analysis (FTA) to determine the probability of a particular
system level failures that are defined by A Taxonomy for Sources of
Software Development Risk to deduce failure analysis in which an
undesired state of a system by using Boolean logic to combine a
series of lower-level events. The major purpose of this paper is to use
the probabilistic calculations of Fault Tree Analysis approach to
determine all possible causes that lead to software development risk
occurrence
Abstract: Conventionally the selection of parameters depends
intensely on the operator-s experience or conservative technological
data provided by the EDM equipment manufacturers that assign
inconsistent machining performance. The parameter settings given by
the manufacturers are only relevant with common steel grades. A
single parameter change influences the process in a complex way.
Hence, the present research proposes artificial neural network (ANN)
models for the prediction of surface roughness on first commenced
Ti-15-3 alloy in electrical discharge machining (EDM) process. The
proposed models use peak current, pulse on time, pulse off time and
servo voltage as input parameters. Multilayer perceptron (MLP) with
three hidden layer feedforward networks are applied. An assessment
is carried out with the models of distinct hidden layer. Training of the
models is performed with data from an extensive series of
experiments utilizing copper electrode as positive polarity. The
predictions based on the above developed models have been verified
with another set of experiments and are found to be in good
agreement with the experimental results. Beside this they can be
exercised as precious tools for the process planning for EDM.
Abstract: In this paper we compare the response of linear and
nonlinear neural network-based prediction schemes in prediction of
received Signal-to-Interference Power Ratio (SIR) in Direct
Sequence Code Division Multiple Access (DS/CDMA) systems. The
nonlinear predictor is Multilayer Perceptron MLP and the linear
predictor is an Adaptive Linear (Adaline) predictor. We solve the
problem of complexity by using the Minimum Mean Squared Error
(MMSE) principle to select the optimal predictors. The optimized
Adaline predictor is compared to optimized MLP by employing
noisy Rayleigh fading signals with 1.8 GHZ carrier frequency in an
urban environment. The results show that the Adaline predictor can
estimates SIR with the same error as MLP when the user has the
velocity of 5 km/h and 60 km/h but by increasing the velocity up-to
120 km/h the mean squared error of MLP is two times more than
Adaline predictor. This makes the Adaline predictor (with lower
complexity) more suitable than MLP for closed-loop power control
where efficient and accurate identification of the time-varying
inverse dynamics of the multi path fading channel is required.