Abstract: This paper aimed to introduce the solution of concrete
slump recovery using chemical admixture type-F (superplasticizer,
naphthalene base) to the practice in order to solve unusable concrete
problem due to concrete loss its slump, especially for those tropical
countries that have faster slump loss rate. In the other hand, randomly
adding superplasticizer into concrete can cause concrete to segregate.
Therefore, this paper also develops the estimation model used to
calculate amount of second dose of superplasticizer need for concrete
slump recovery. Fresh properties of ordinary Portland cement
concrete with volumetric ratio of paste to void between aggregate
(paste content) of 1.1-1.3 with water-cement ratio zone of 0.30 to
0.67 and initial superplasticizer (naphthalene base) of 0.25%-1.6%
were tested for initial slump and slump loss for every 30 minutes for
one and half hour by slump cone test. Those concretes with slump
loss range from 10% to 90% were re-dosed and successfully
recovered back to its initial slump. Slump after re-dosed was tested
by slump cone test. From the result, it has been concluded that, slump
loss was slower for those mix with high initial dose of
superplasticizer due to addition of superplasticizer will disturb
cement hydration. The required second dose of superplasticizer was
affected by two major parameters, which were water-cement ratio
and paste content, where lower water-cement ratio and paste content
cause an increase in require second dose of superplasticizer. The
amount of second dose of superplasticizer is higher as the solid
content within the system is increase, solid can be either from cement
particles or aggregate. The data was analyzed to form an equation use
to estimate the amount of second dosage requirement of
superplasticizer to recovery slump to its original.
Abstract: Escherichia coli (E. coli) is the most isolated bacteria
from blood circulation of septicemic calves. Given the prevalence of
septicemia in animals and its economic importance in veterinary
practice, better understanding of changes in clinical signs following
disease, may contribute to early detection of disorder. The present
study has been carried out to detect changes of clinical signs in
induced sepsis in calves with E. coli. Colisepticemia has been
induced in 10 twenty-day old healthy Holstein- Frisian calves with
intravenous injection of 1.5 X 109 colony forming units (cfu) of
O111:H8 strain of E. coli. Clinical signs including rectal temperature,
heart rate, respiratory rate, shock, appetite, sucking reflex, feces
consistency, general behavior, dehydration and standing ability were
recorded in experimental calves during 24 hours after induction of
colisepticemia. Blood culture was also carried out from calves four
times during experiment. ANOVA with repeated measure is used to
see changes of calves’ clinical signs to experimental colisepticemia,
and values of P≤ 0.05 was considered statistically significant. Mean
values of rectal temperature and heart rate as well as median values
of respiratory rate, appetite, suckling reflex, standing ability and feces
consistency of experimental calves increased significantly during
study (P 0.05). The
results of present study showed that total score of clinical signs in
calves with experimental colisepticemia increased significantly,
although score of some clinical signs such as shock did not change
significantly.
Abstract: Software quality issues require special attention
especially in view of the demands of quality software product to meet
customer satisfaction. Software development projects in most
organisations need proper defect management process in order to
produce high quality software product and reduce the number of
defects. The research question of this study is how to produce high
quality software and reducing the number of defects. Therefore, the
objective of this paper is to provide a framework for managing
software defects by following defined life cycle processes. The
methodology starts by reviewing defects, defect models, best
practices, and standards. A framework for defect management life
cycle is proposed. The major contribution of this study is to define a
defect management roadmap in software development. The adoption
of an effective defect management process helps to achieve the
ultimate goal of producing high quality software products and
contributes towards continuous software process improvement.
Abstract: In 2009, the new HRM policy was implemented in
Qatar for public sector organisations. The purpose of this research is
to examine how Qatar’s 2009 HRM policy was significant in
influencing employee retention in public organisations. The
conducted study utilised quantitative methodology to analyse the data
on employees’ perceptions of such HRM practices as Performance
Management, Rewards and Promotion, Training and Development
associated with the HRM policy in public organisations in
comparison to semi-private organisations. Employees of seven public
and semi-private organisations filled in the questionnaire based on
the 5-point Likert scale to present quantitative results. The data was
analysed with the correlation and multiple regression statistical
analyses. It was found that Performance Management had the
relationship with Employee Retention, and Rewards and Promotion
influenced Job Satisfaction in public organisations. Relationship
between Job Satisfaction and Employee Retention was also observed.
However, no significant differences were observed in the role of
HRM practices in public and semi-private organisations.
Abstract: The end panels of a large rectangular industrial duct,
which experience significant internal pressures, also experience
considerable transverse shear due to transfer of gravity loads to the
supports. The current design practice of such thin plate panels for
shear load is based on methods used for the design of plate girder
webs. The structural arrangements, the loadings and the resulting
behavior associated with the industrial duct end panels are, however,
significantly different from those of the web of a plate girder. The
large aspect ratio of the end panels gives rise to multiple bands of
tension fields, whereas the plate girder web design is based on one
tension field. In addition to shear, the industrial end panels are
subjected to internal pressure which in turn produces significant
membrane action. This paper reports a study which was undertaken
to review the current industrial analysis and design methods and to
propose a comprehensive method of designing industrial duct end
panels for shear resistance. In this investigation, a nonlinear finite element model was
developed to simulate the behavior of industrial duct end panel, along
with the associated edge stiffeners, subjected to transverse shear and
internal pressures. The model considered the geometric imperfections
and constitutive relations for steels. Six scale independent
dimensionless parameters that govern the behavior of such end panel
were identified and were then used in a parametric study. It was
concluded that the plate slenderness dominates the shear strength of
stockier end panels, and whereas, both the plate slenderness and the
aspect ratio influence the shear strength of slender end panels. Based
on these studies, this paper proposes design aids for estimating the
shear strength of rectangular duct end panels.
Abstract: Coal fly ash, an industrial by product of coal
combustion thermal power plants is considered as a hazardous
material and its improper disposal has become an environmental
issue. On the other hand, manufacturing conventional clay bricks
involves on consumption of large amount of clay and leads
substantial depletion of topsoil. This paper unveils the possibility of
using fly ash as a partial replacement of clay for brick manufacturing
considering the local technology practiced in Bangladesh. The effect
of fly ash with different replacing ratio (0%, 20%, 30%, 40%, and
50% by volume) of clay on properties of bricks was studied. Bricks
were made in the field parallel to ordinary bricks marked with
specific number for different percentage to identify them at time of
testing. No physical distortion is observed in fly ash brick after
burning in the kiln. Results from laboratory test show that
compressive strength of brick is decreased with the increase of fly
ash and maximum compressive strength is found to be 19.6 MPa at
20% of fly ash. In addition, water absorption of fly ash brick is
increased with the increase of fly ash. The abrasion value and
Specific gravity of coarse aggregate prepared from brick with fly ash
also studied and the results of this study suggests that 20% fly ash
can be considered as the optimum fly ash content for producing good
quality bricks utilizing present practiced technology.
Abstract: Global economy today is full of sophistication. All
over the world, business and marketing practices are undergoing
unprecedented transformation. In realization of this fact, the federal
government of Nigeria has put in place a robust transformation
agenda in order to put Nigeria in a better position to be a competitive
player and in the process transform all sectors of its economy. New
technologies, especially the Internet, are the driving force behind this
transformation. However, technology has inadvertently affected the
way businesses are done thus necessitating the acquisition of new
skills. In developing countries like Nigeria, citizens are still battling
with effective application of those technologies. Obviously, students
of business education need to acquire relevant business knowledge to
be able to transit into the world of work on graduation from school
and compete favorably in the labor market. Therefore, effective
utilization of social media by both teachers and students can help
extensively in empowering students with the needed skills. Social
media which is a group of Internet-based applications built on the
ideological foundations of Web 2.0, that allow the creation and
exchange of user generated content, and if incorporated into the
classroom experience may be the needed answer to unemployment
and poverty in Nigeria as beneficiaries can easily connect with
existing and potential enterprises and customers, engage with them
and reinforce mutual business benefits. Challenges and benefits of
social media use in education in Nigeria universities were revealed in
this study.
Abstract: The application of ESS (Energy Storage Systems) in
the future grids has been the solution of the microgrid. However, high
investment costs necessitate accurate modeling and control strategy of
ESS to justify its economic viability and further underutilization.
Therefore, the reasonable control strategy for ESS which is subjected
to generator and usage helps to curtail the cost of investment and
operation costs. The rated frequency in power system is decreased
when the load is increasing unexpectedly; hence the thermal power is
operated at the capacity of only its 95% for the Governor Free (GF) to
adjust the frequency as reserve (5%) in practice. The ESS can be
utilized with governor at the same time for the frequency response due
to characteristic of its fast response speed and moreover, the cost of
ESS is declined rapidly to the reasonable price. This paper presents the
ESS control strategy to extend usage of the ESS taken account into
governor’s ramp rate and reduce the governor’s intervention as well.
All results in this paper are simulated by MATLAB.
Abstract: Reduction of energy consumption in built
infrastructure, through the installation of energy-efficient
technologies, is a major approach to achieving sustainability. In
practice, the viability of energy efficiency projects strongly depends
on the cost reimbursement and profitability. These projects are
subject to failure if the actual cost savings do not reimburse the
project cost promptly. In such cases, refinancing could be a solution
to benefit from the long-term returns of the project, if implemented
wisely. However, very little is still known about the effect of
refinancing options on financial performance of energy efficiency
projects. In order to fill this gap, the present study investigates the
financial behavior of energy efficiency projects with focus on
refinancing options, such as Leveraged Loans. A System Dynamics
(SD) model is introduced, and the model application is presented
using an actual case-study data. The case study results indicate that
while high-interest start-ups make using Leveraged Loan inevitable,
refinancing can rescue the project and bring about profitability. This
paper also presents some managerial implications of refinancing
energy efficiency projects based on the case-study analysis. Results
of this study help to implement financially viable energy efficiency
projects so that the community could benefit from their
environmental advantages widely.
Abstract: Millions of girls are forcibly married during the
transitional period between puberty and adulthood. At a stage of
vulnerability cultural practices, religious rights and social standards
place her in a position where she is catapult into womanhood. An
advocate against forced child marriage could argue that child rights,
cultural rights, religious rights, right to marry, right to life, right to
health, right to education, right to be free from slavery, right to be
free from torture, right to consent to marriage are all violated by the
practice of child marriage. The author is this advocate and this paper
will present how some of these rights are violated and establish the
need for change.
Abstract: The aim of sustainable architecture is to design
buildings with the least adverse effects on the environment and
provide better conditions for people. What building forms make the
best use of land? This question was addressed in the late 1960s at the
center of Land Use and Built Form Studies in Cambridge. This led to
a number of influential papers which had a great influence on the
practice of urban design. This paper concentrates on the results of
sustainability caused by climatic conditions in Iranian traditional
architecture in hot-arid regions. As people spent a significant amount
of their time in houses, it was very important to have such houses to
fulfill their needs physically and spiritually as well as satisfying their
cultural and religious aspects of their lifestyles. In a vast country such
as Iran with different climatic zones, traditional builders have
presented series of logical solutions for human comfort. These
solutions have been able to response to the environmental problems
for a long period of time. As a result, by considering the experience
in traditional architecture of hot–arid climate in Iran, it is possible to
attain sustainable architecture.
Abstract: Experience is what makes a man perfect. Though we
tend to learn many a different things in life through practice still we
need to go an extra mile to gain experience which would be profitable
only when it is integrated with regular practice. A clear phenomenal
idea is that every teacher is a learner. The centralized idea of this paper would focus on the integrated
practices carried out among the students of Jizan University which
enhances learning through experiences. Integrated practices like
student-directed activities, balanced curriculum, phonological based
activities and use of consistent language would enlarge the vision and
mission of students to earn experience through learning. Students
who receive explicit instruction and guidance could practice the skills
and strategies through student-directed activities such as peer tutoring
and cooperative learning. The second effective practice is to use
consistent language. Consistent language provides students a model
for talking about the new concepts which also enables them to
communicate without hindrances. Phonological awareness is an
important early reading skill for all students. Students generally have
phonemic awareness in their home language can often transfer that
knowledge to a second language. And also a balanced curriculum
requires instruction in all the elements of reading. Reading is the
most effective skill when both basic and higher-order skills are
included on a daily basis. Computer based reading and listening skills
will empower students to understand language in a better way.
English language learners can benefit from sound reading instruction
even before they are fully proficient in English as long as the
instruction is comprehensible. Thus, if students have to be well
equipped in learning they should foreground themselves in various
integrated practices through multifarious experience for which
teachers are moderators and trainers. This type of learning prepares
the students for a constantly changing society which helps them to
meet the competitive world around them for better employability
fulfilling the vision and mission of the institution.
Abstract: As computing technology advances, smartphone
applications can assist student learning in a pervasive way. For
example, the idea of using mobile apps for the PA Common Trees,
Pests, Pathogens, in the field as a reference tool allows middle school
students to learn about trees and associated pests/pathogens without
bringing a textbook. While working on the development of three heterogeneous mobile
apps, we ran into numerous challenges. Both the traditional waterfall
model and the more modern agile methodologies failed in practice.
The waterfall model emphasizes the planning of the duration for each
phase. When the duration of each phase is not consistent with the
availability of developers, the waterfall model cannot be employed.
When applying Agile Methodologies, we cannot maintain the high
frequency of the iterative development review process, known as
‘sprints’. In this paper, we discuss the challenges and solutions. We
propose a hybrid model known as the Relay Race Methodology to
reflect the concept of racing and relaying during the process of
software development in practice. Based on the development project,
we observe that the modeling of the relay race transition between any
two phases is manifested naturally. Thus, we claim that the RRM
model can provide a de fecto rather than a de jure basis for the core
concept in the software development model. In this paper, the background of the project is introduced first.
Then, the challenges are pointed out followed by our solutions.
Finally, the experiences learned and the future works are presented.
Abstract: The paper is focused to the evaluation railway tracks
in the Slovakia by using Multi-Criteria method. Evaluation of railway
tracks has important impacts for the assessment of investment in
technical equipment. Evaluation of railway tracks also has an
important impact for the allocation of marshalling yards. Marshalling
yards are in transport model as centers for the operation assigned
catchment area. This model is one of the effective ways to meet the
development strategy of the European Community's railways. By
applying this model in practice, a transport company can guarantee a
higher quality of service and then expect an increase in performance.
The model is also applicable to other rail networks. This model
supplements a theoretical problem of train formation problem of new
ways of looking at evaluation of factors affecting the organization of
wagon flows.
Abstract: This research tested the performance of alternative
warehouse designs concerning the picking process. The chosen
performance measures were Travel Distance and Total Fulfilment
Time. An explanatory case study was built up around a model
implemented with SIMUL8. Hypotheses were set by selecting
outcomes from the literature survey matching popular empirical
findings. 17.4% reductions were found for Total Fulfilment Time and
Resource Utilisation. The latter was then used as a proxy for
operational efficiency. Literal replication of theoretical data-patterns
was considered as an internal validity sign. Assessing the estimated
changes benefits ahead of implementation was found to be a
contribution to practice.
Abstract: The paper is focused on the operational model for
transport the single wagon consignments on railway network by
using two different models of train formation. The paper gives an
overview of possibilities of improving the quality of transport
services. Paper deals with two models used in problematic of train
formatting - time continuously and time discrete. By applying these
models in practice, the transport company can guarantee a higher
quality of service and expect increasing of transport performance.
The models are also applicable into others transport networks. The
models supplement a theoretical problem of train formation by new
ways of looking to affecting the organization of wagon flows.
Abstract: Lateral torsional buckling is a global buckling mode
which should be considered in design of slender structural members
under flexure about their strong axis. It is possible to compute the
load which causes lateral torsional buckling of a beam by finite
element analysis, however, closed form equations are needed in
engineering practice for calculation ease which can be obtained by
using energy method. In lateral torsional buckling applications of
energy method, a proper function for the critical lateral torsional
buckling mode should be chosen which can be thought as the
variation of twisting angle along the buckled beam. Accuracy of the
results depends on how close is the chosen function to the exact
mode. Since critical lateral torsional buckling mode of the cantilever
I-beams varies due to material properties, section properties and
loading case, the hardest step is to determine a proper mode function
in application of energy method. This paper presents an approximate function for critical lateral
torsional buckling mode of doubly symmetric cantilever I-beams.
Coefficient matrices are calculated for concentrated load at free end,
uniformly distributed load and constant moment along the beam
cases. Critical lateral torsional buckling modes obtained by presented
function and exact solutions are compared. It is found that the modes
obtained by presented function coincide with differential equation
solutions for considered loading cases.
Abstract: In this study, a general approach to the reliability
based limit analysis of laterally loaded piles is presented. In
engineering practice the uncertainties play a very important role. The
aim of this study is to evaluate the lateral load capacity of free-head
and fixed-head long pile when plastic limit analysis is considered. In
addition to the plastic limit analysis to control the plastic behaviour
of the structure, uncertain bound on the complementary strain energy
of the residual forces is also applied. This bound has significant effect
for the load parameter. The solution to reliability-based problems is
obtained by a computer program which is governed by the reliability
index calculation.
Abstract: An unrecorded experiment of use of the smartphone
as a tool for practical classes of histology is presented in this paper.
Behavior and learning of students of science courses at the University
were analyzed and compared as well as the mode of teaching of this
discipline and the appreciation of the students, using either digital
photographs taken by phone or drawings for record microscopic
observations, analyze and interpret histological sections of human or
animal tissues.
Abstract: Scheduled waste management is very important in
environmental and health aspects. In delivering services, highway
industry has been indirectly involved in producing scheduled wastes.
This paper aims to define the scheduled waste, to provide a
conceptual framework of the scheduled waste management in
highway industry, to highlight the effect of improper management of
scheduled waste and to encourage future researchers to identify and
share the present practice of scheduled waste management in their
country. The understanding on effective management of scheduled
waste will help the operators of highway industry, the academicians,
future researchers, and encourage a friendly environment around the
world. The study on scheduled waste management in highway
industry is very crucial as highway transverse and run along
kilometers crossing the various type of environment, residential and
schools. Using Environmental Quality (Scheduled Waste)
Regulations 2005 as a guide, this conceptual paper highlight several
scheduled wastes produced by highway industry in Malaysia and
provide a conceptual framework of scheduled waste management that
focused on the highway industry. Understanding on scheduled waste
management is vital in order to preserve the environment. Besides
that, the waste substances are hazardous to human being. Many
diseases have been associated with the improper management of
schedule waste such as cancer, throat irritation and respiration
problem.