Abstract: The effect of flooding can be a serious problem for
wheat farmers, even at dry land condition. Amount of flooding
damage depends on duration flooding, developmental stage, wheat
type and variety. Therefore as a factorial experiment in randomized
complete design based on winter bread wheat cultivars (Pishtaz,
Marvdasht, Shiraz, Zarin, Shahriar, C-81-4, Sardari, Agosta seed,
FGS and Azar2) at stages (Non- flooding stress, flooding at tillering
and stem elongation stages for 15 days) carried out in Faculty of
Agriculture, Razi University, Kermanshah, Iran. During flooding,
soil environment of plant roots were water saturated. Analysis of
variance showed that flooding had a significant effect on the number
of grains per spike, grain weight per spike and a grain weight. Hence
flooding reduces the number of grain per spike between 27.1 to 42.5
percent, grain weight per spike between 34.7 to 54.4 percent and
single grain weight between 12.1 to 15.1 percent. Effects of flooding
at the tillering stage reduced higher than stem elongation stage on
studied traits. The result also showed that flooding at tillering stage
delayed spikelet primordial and floret. Between wheat cultivars was
significant for traits, but were different reactions. "Shiraz", "Zarin"
and "Shahriar" had the most no. grain per spike, but "Zarin" and
"Sardari" had the most grain weight per spike and single grain
weight, respectively. Also, interaction between start of flooding and
cultivar was significant.
Abstract: When a small H/W IP is designed, we can develop an
appropriate verification environment by observing the simulated
signal waves, or using the serial test vectors for the fixed output. In the
case of design and verification of a massive parallel processor with
multiple IPs, it-s difficult to make a verification system with existing
common verification environment, and to verify each partial IP. A
TestDrive verification environment can build easy and reliable
verification system that can produce highly intuitive results by
applying Modelsim and SystemVerilog-s DPI. It shows many
advantages, for example a high-level design of a GPGPU processor
design can be migrate to FPGA board immediately.
Abstract: Resource discovery is one of the chief services of a grid. A new approach to discover the provenances in grid through learning automata has been propounded in this article. The objective of the aforementioned resource-discovery service is to select the resource based upon the user-s applications and the mercantile yardsticks that is to say opting for an originator which can accomplish the user-s tasks in the most economic manner. This novel service is submitted in two phases. We proffered an applicationbased categorization by means of an intelligent nerve-prone plexus. The user in question sets his or her application as the input vector of the nerve-prone nexus. The output vector of the aforesaid network limns the appropriateness of any one of the resource for the presented executive procedure. The most scrimping option out of those put forward in the previous stage which can be coped with to fulfill the task in question is picked out. Te resource choice is carried out by means of the presented algorithm based upon the learning automata.
Abstract: This paper examines the role and the place of
transdisciplinarity in the urbanism of the 21st century, with the
emphasis on Montenegro urbanism. Global processes require a
systematic strategy and systemic synergistic engagement in the
development of cities in 21st centuries. Urbanism as a profession and
a discipline should be developed parallel and in correlation, based on
the principles of integrality and communication skills, in order to
enable development of the sustainable urban system. The importance
of integrated urbanism and other disciplines are also emphasized as
well as their synergies activities. The paper also presents the positive
examples of urban theory and practice in the world, which influenced
the direction of development of the modern urbanism.
Transdisciplinarity is a priority methodology for sustainable urban
development, which is insufficiently developed in Montenegro, but
there is a basis for its development. It is necessary to unite different
social sensibilities, academic and non-academic knowledge, as well
as the public and private sectors in order to develop holistic,
inclusive and sustainable urban spaces of the 21st centuries.
Abstract: As a result of the high cost of housing, the increasing population is forced to live in substandard housing and unhealthy conditions giving rise to poor residential neighborhoods. The paper examines the causes and characteristics of poor residential neighborhood. The paper finds the problems that have influence poor neighborhoods to; poverty, growth of informal sector and housing shortage. The paper asserts that poor residential neighborhoods have adverse effects on the people.
The secondary data was obtained from books, journals and seminar papers while primary data relating to building and environmental quality from structured questionnaire administered on sample of 500 household heads, from sampling frame of 5000 housing units.
The study reveals that majority of the respondents are poor and employed in informal sector. The paper suggests urban renewal and slum upgrading programs as methods in dealing with the situation and an improvement in the socio-economic circumstances of the inhabitants.
Abstract: In this paper, the phase control antenna array synthesis
is presented. The problem is formulated as a constrained optimization
problem that imposes nulls with prescribed level while maintaining
the sidelobe at a prescribed level. For efficient use of the algorithm
memory, compared to the well known Particle Swarm Optimization
(PSO), the Accelerated Particle Swarm Optimization (APSO) is used
to estimate the phase parameters of the synthesized array. The
objective function is formed using a main objective and set of
constraints with penalty factors that measure the violation of each
feasible solution in the search space to each constraint. In this case
the obtained feasible solution is guaranteed to satisfy all the
constraints. Simulation results have shown significant performance
increases and a decreased randomness in the parameter search space
compared to a single objective conventional particle swarm
optimization.
Abstract: A SnO2/CdS/CdTe heterojunction was fabricated by
thermal evaporation technique. The fabricated cells were annealed at
573K for periods of 60, 120 and 180 minutes. The structural
properties of the solar cells have been studied by using X-ray
diffraction. Capacitance- voltage measurements were studied for the
as-prepared and annealed cells at a frequency of 102 Hz. The
capacitance- voltage measurements indicated that these cells are
abrupt. The capacitance decreases with increasing annealing time.
The zero bias depletion region width and the carrier concentration
increased with increasing annealing time. The carrier transport
mechanism for the CdS/CdTe heterojunction in dark is tunneling
recombination. The ideality factor is 1.56 and the reverse bias
saturation current is 9.6×10-10A. The energy band lineup for the n-
CdS/p-CdTe heterojunction was investigated using current - voltage
and capacitance - voltage characteristics.
Abstract: In this paper, the significant wave height at the Upper Gulf of Thailand and the changing of wave height at Bangkhuntien shoreline were simulated by using the Simulating WAves Nearshore Model (SWAN) version 40.51. The simulated results indicated that the significant wave height by SWAN model corresponded with the observed data. The results showed that the maximum significant wave height at the Bangkhuntien shoreline were 1.06-2.05 m. and the average significant wave height at the Bangkhuntien shoreline were 0.30-0.47 m. The significant wave height can be used to calculate the erosion through the Bangkhuntien shoreline. The erosion rates at the Bangkhuntien shoreline were prepared by using the aerial photo and they were about 1.80 m/yr. from 1980- 1986, 4.75 m/yr from 1987-1993, 15.28 m/yr from 1994-1996 and 10.03 m/yr from 1997-2002. The relation between the wave energy and the erosion were in good agreement. Therefore, the significant wave height was one of the major factors of the erosion at the Bangkhuntien shoreline.
Abstract: As known that efficiency of photovoltaic cells is not
high as desired level. Efficiency of PVs could be improved by
selecting convenient locations that have high solar irradiation,
sunshine duration, mild temperature, low level air pollution and dust
concentration. Additionally, some environmental parameters called
derating factors effect to decrease PV efficiencies such as cloud, high
temperature, aerosol optical depth, high dust concentration, shadow,
snow, humidity etc. In this paper, all parameters that effect PV
efficiency are considered in detail under climatic conditions of
Istanbul. A 750 Wp PV system with measurement devices is
constructed in Maslak campus of Istanbul Technical University.
Abstract: Quaternary InxAlyGa1-x-yN semiconductors have
attracted much research interest because the use of this quaternary
offer the great flexibility in tailoring their band gap profile while
maintaining their lattice-matching and structural integrity. The
structural and optical properties of InxAlyGa1-x-yN alloys grown by
molecular beam epitaxy (MBE) is presented. The structural quality of
InxAlyGa1-x-yN layers was characterized using high-resolution X-ray
diffraction (HRXRD). The results confirm that the InxAlyGa1-x-yN
films had wurtzite structure and without phase separation. As the In
composition increases, the Bragg angle of the (0002) InxAlyGa1-x-yN
peak gradually decreases, indicating the increase in the lattice constant
c of the alloys. FWHM of (0002) InxAlyGa1-x-yN decreases with
increasing In composition from 0 to 0.04, that could indicate the
decrease of quality of the samples due to point defects leading to
non-uniformity of the epilayers. UV-VIS spectroscopy have been used
to study the energy band gap of InxAlyGa1-x-yN. As the indium (In)
compositions increases, the energy band gap decreases. However, for
InxAlyGa1-x-yN with In composition of 0.1, the band gap shows a
sudden increase in energy. This is probably due to local alloy
compositional fluctuations in the epilayer. The bowing parameter
which appears also to be very sensitive on In content is investigated
and obtained b = 50.08 for quaternary InxAlyGa1-x-yN alloys. From
photoluminescence (PL) measurement, green luminescence (GL)
appears at PL spectrum of InxAlyGa1-x-yN, emitted for all x at ~530 nm
and it become more pronounced as the In composition (x) increased,
which is believed cause by gallium vacancies and related to isolated
native defects.
Abstract: The study aimed to verify a hypothesis that a sense of
fulfillment in student life and perceived stress in training in the
facilities could affect vocational identity among social welfare
university students, in order to acquire implications for enhancing the
vocational consciousness. A questionnaire survey was conducted with
388 third- and fourth-year students of training course for certified
social workers in three universities in A prefecture in Japan. The
questionnaire was returned by 338 students, and 288 responses
(85.2%) were valid and used for the analysis. As a SEM result, the
hypothesized model proved to be fit to the data. Path coefficient of
sense of fulfillment of student life to vocational identity was
statistically positive. Path coefficient of training stress to vocational
identity was statistically negative.
Abstract: Dehydration of methanol to dimethyl ether (DME)
over a commercial Al2O3 catalyst was studied in an isothermal integral
fixed bed reactor. The experiments were performed on the temperature
interval 513-613 K, liquid hourly space velocity (LHSV) of 0.9-2.1h-1,
pressures between 0.1 and 1.0 MPa. The effect of different operation
conditions on the dehydration of methanol was investigated in a
laboratory scale experiment. A new intrinsic kinetics equation based
on the mechanism of Langmuir-Hinshelwood dissociation adsorption
was developed for the dehydration reaction by fitting the expressions
to the experimental data. An activation energy of 67.21 kJ/mol was
obtained for the catalyst with the best performance. Statistic test
showed that this new intrinsic kinetics equation was acceptable.
Abstract: A numerical study on the turbulent flow and heat
transfer characteristics in the rectangular channel with different types
of baffles is carried out. The inclined baffles have the width of 19.8
cm, the square diamond type hole having one side length of 2.55 cm,
and the inclination angle of 5o. Reynolds number is varied between
23,000 and 57,000. The SST turbulence model is applied in the
calculation. The validity of the numerical results is examined by the
experimental data. The numerical results of the flow field depict that
the flow patterns around the different baffle type are entirely different
and these significantly affect the local heat transfer characteristics.
The heat transfer and friction factor characteristics are significantly
affected by the perforation density of the baffle plate. It is found that
the heat transfer enhancement of baffle type II (3 hole baffle) has the
best values.
Abstract: A prototype of an anomaly detection system was
developed to automate process of recognizing an anomaly of
roentgen image by utilizing fuzzy histogram hyperbolization image
enhancement and back propagation artificial neural network.
The system consists of image acquisition, pre-processor, feature
extractor, response selector and output. Fuzzy Histogram
Hyperbolization is chosen to improve the quality of the roentgen
image. The fuzzy histogram hyperbolization steps consist of
fuzzyfication, modification of values of membership functions and
defuzzyfication. Image features are extracted after the the quality of
the image is improved. The extracted image features are input to the
artificial neural network for detecting anomaly. The number of nodes
in the proposed ANN layers was made small.
Experimental results indicate that the fuzzy histogram
hyperbolization method can be used to improve the quality of the
image. The system is capable to detect the anomaly in the roentgen
image.
Abstract: The IEEE802.16 standard which has emerged as
Broadband Wireless Access (BWA) technology, promises to deliver
high data rate over large areas to a large number of subscribers in the
near future. This paper analyze the effect of overheads over capacity
of downlink (DL) of orthogonal frequency division multiple access
(OFDMA)–based on the IEEE802.16e mobile WiMAX system with
and without overheads. The analysis focuses in particular on the
impact of Adaptive Modulation and Coding (AMC) as well as
deriving an algorithm to determine the maximum numbers of
subscribers that each specific WiMAX sector may support. An
analytical study of the WiMAX propagation channel by using Cost-
231 Hata Model is presented. Numerical results and discussion
estimated by using Matlab to simulate the algorithm for different
multi-users parameters.
Abstract: Today, incorrect use of lands and land use changes,
excessive grazing, no suitable using of agricultural farms, plowing on
steep slopes, road construct, building construct, mine excavation etc
have been caused increasing of soil erosion and sediment yield. For
erosion and sediment estimation one can use statistical and empirical
methods. This needs to identify land unit map and the map of
effective factors. However, these empirical methods are usually time
consuming and do not give accurate estimation of erosion. In this
study, we applied GIS techniques to estimate erosion and sediment of
Menderjan watershed at upstream Zayandehrud river in center of
Iran. Erosion faces at each land unit were defined on the basis of land
use, geology and land unit map using GIS. The UTM coordinates of
each erosion type that showed more erosion amounts such as rills and
gullies were inserted in GIS using GPS data. The frequency of
erosion indicators at each land unit, land use and their sediment yield
of these indices were calculated. Also using tendency analysis of
sediment yield changes in watershed outlet (Menderjan hydrometric
gauge station), was calculated related parameters and estimation
errors. The results of this study according to implemented watershed
management projects can be used for more rapid and more accurate
estimation of erosion than traditional methods. These results can also
be used for regional erosion assessment and can be used for remote
sensing image processing.
Abstract: A model-free robust control (MFRC) approach is proposed for position control of robot manipulators in the state space. The control approach is verified analytically to be robust subject to uncertainties including external disturbances, unmodeled dynamics, and parametric uncertainties. There is a high flexibility to work on different systems including actuators by the use of the proposed control approach. The proposed control approach can guarantee the robustness of control system. A PUMA 560 robot driven by geared permanent magnet dc motors is simulated. The simulation results show a satisfactory performance for control system under technical specifications. KeywordsModel-free, robust control, position control, PUMA 560.
Abstract: Australia, while being a large and eager consumer of
innovative and cutting edge Information and Communication
Technologies (ICT), continues to struggle to remain a leader in
Technological Innovation. This paper has two main contributions to
address certain aspects of this complex issue. The first being the
current findings of an ongoing research project on Information and
Innovation Management in the Australian Information and
Communication Technologies (ICT) sector. The major issues being
considered by the project include: investigation of the possible
inherent entrepreneurial nature of ICT; how to foster ICT innovation;
and examination of the inherent difficulties currently found within
the ICT industry of Australia in regards to supporting the
development of innovative and creative ideas. The second major
contribution is details of the I.-C.A.N. (Innovation by Collaborative
Anonymous Networking) software application information
management tool created and evolving in our research group. I-CAN,
besides having a positive reinforcement acronym, is aimed at
facilitating productive collaborative innovation in an Australian
workplace. Such a work environment is frequently subjected to
cultural influences such as the 'tall poppy syndrome' and 'negative'
or 'unconstructive' peer-pressure. There influences are frequently
seen as inhibitors to employee participation, entrepreneurship and
innovation.
Abstract: This paper presents the development of a software
application for Off-line robot task programming and simulation. Such
application is designed to assist in robot task planning and to direct
manipulator motion on sensor based programmed motion. The
concept of the designed programming application is to use the power
of the knowledge base for task accumulation. In support of the
programming means, an interactive graphical simulation for
manipulator kinematics was also developed and integrated into the
application as the complimentary factor to the robot programming
media. The simulation provides the designer with useful,
inexpensive, off-line tools for retain and testing robotics work cells
and automated assembly lines for various industrial applications.
Abstract: The majority of micro-entrepreneurs in Malaysia
operate very small-scaled business activities such as food stalls,
burger stalls, night market hawkers, grocery stores, constructions,
rubber and oil palm small holders, and other agro-based services and
activities. Why are they venturing into entrepreneurship - is it for
survival, out of interest or due to encouragement and assistance from
the local government? And why is it that some micro-entrepreneurs
are lagging behind in entrepreneurship, and what do they need to
rectify this situation so that they are able to progress further?
Furthermore, what are the skills that the micro entrepreneurs should
developed to transform them into successful micro-enterprises and
become small and medium-sized enterprises (SME)? This paper
proposes a 7-Step approach that can serve as a basis for identification
of critical entrepreneurial success factors that enable policy makers,
practitioners, consultants, training managers and other agencies in
developing tools to assist micro business owners. This paper also
highlights the experience of one of the successful companies in
Malaysia that has transformed from micro-enterprise to become a
large organization in less than 10 years.