Abstract: Design, as an area of knowledge, is subject to changes that affect it through different approaches, both theoretical and practical; its include matters related with responsibility, environment, social worries, and things alike. Commensurately, such contemporary aspects open room for social initiatives. This scenario begins to be looked at, especially in creative communities. Such proposal for a systemic approach of design is seen as a way to involve the stakeholders in the processes of investigation and of social innovation, which can decisively contribute for the development of traditional local communities. As a theoretical basis for the research, this paper outlines some especial features of design and social innovation, in their particular and in their complementary aspects, as well as in the way they relate with each other.
Abstract: The White Kwao (Pueraria mirifica), a potent phytoestrogenic medicinal plant, has long been use in Thailand as a traditional folkmedicine. However, no scientific information of the direct effect of White Kwao on the development of mammalian embryo was available. Therefore, the purpose of this study was to investigate the effect of White Kwao extract on the in vitro development and implantation rate of mouse embryos. This study was designed into two experiments. In the first experiment, the two-cell stage mouse embryos were collected from the oviduct of superovulated mature female mice, and randomly cultured in three different media, the M16, M16 supplemented with 0.52μg esthinylestradiol-17β, and M16 supplemented with 10 mg/ml White Kwao extract. The culture was incubated in CO2 incubator at 37 oC . After the embryos were cultivated, the developments of embryos were observed every 24 hours for 5 days. The development rate of embryos from the two-cell stage to blastocyst stage in the media was with White Kwao was significantly higher (p
Abstract: Coriander is an annual and herbaceous plant, belong to
the apiaceae family. This plant is cultivated world widely. It is well
known for having medicinal properties. The aim of this experiment
was to study seed quality of species grown in Kermanshah
conditions. The experiment was carried out in research farm, Campus
of Agriculture and Natural Resources, Razi University, Kermanshah,
Iran. Coriander (local type) was grown in late spring May (5th and
20th) and Jun (4th and 19th), and plant density (10, 30, 50 and 70
plants m-2) in 2009. The experimental plots were laid out in a
factorial according to a randomized complete block design with three
replications. The fruits were harvest between 83.5 – 106.5 days after
sowing. The essential oil and oil content was extracted by Clevenger
and Soxhlet apparatuses, respectively. Results showed that delay at
planting date increased the oil content. Also, with the increase at
plant density was decreased oil content and essential oil.
Abstract: This paper presents a new system developed in Java®
for pattern recognition and pattern summarisation in multi-band
(RGB) satellite images. The system design is described in some
detail. Results of testing the system to analyse and summarise
patterns in SPOT MS images and LANDSAT images are also
discussed.
Abstract: In most wheat growing moderate regions and
especially in the north of Iran climate, is affected grain filling by
several physical and abiotic stresses. In this region, grain filling often
occurs when temperatures are increasing and moisture supply is
decreasing. The experiment was designed in RCBD with split plot
arrangements with four replications. Four irrigation treatments
included (I0) no irrigation (check); (I1) one irrigation (50 mm) at
heading stage; (I2) two irrigation (100 mm) at heading and anthesis
stage; and (I3) three irrigation (150 mm) at heading, anthesis and
early grain filling growth stage, two wheat cultivars (Milan and
Shanghai) were cultured in the experiment. Totally raining was 453
mm during the growth season. The result indicated that biological
yield, grain yield and harvest index were significantly affected by
irrigation levels. I3 treatment produced more tillers number in m2,
fertile tillers number in m2, harvest index and biological yield. Milan
produced more tillers number in m2, fertile tillers in m2, while
Shanghai produced heavier tillers and grain 1000 weight. Plant height
was significant in wheat varieties while were not statistically
significant in irrigation levels. Milan produced more grain yield,
harvest index and biological yield. Grain yield shown that I1, I2, and
I3 produced increasing of 5228 (21%), 5460 (27%) and 5670 (29%)
kg ha-1, respectively. There was an interaction of irrigation and
cultivar on grain yields. In the absence of the irrigation reduced grain
1000 weight from 45 to 40 g. No irrigation reduced soil moisture
extraction during the grain filling stage. Current assimilation as a
source of carbon for grain filling depends on the light intercepting
viable green surfaces of the plant after anthesis that due to natural
senescence and the effect of various stresses. At the same time the
demand by the growing grain is increasing. It is concluded from
research work that wheat crop irrigated Milan cultivar could increase
the grain yield in comparison with Shanghai cultivar. Although, the
grain yield of Shanghai under irrigation was slightly lower than
Milan. This grain yield also was related to weather condition, sowing
date, plant density and location conditions and management of
fertilizers, because there was not significant difference in biological
and straw yield. The best result was produced by I1 treatment. I2 and
I3 treatments were not significantly difference with I1 treatment.
Grain yield of I1 indicated that wheat is under soil moisture
deficiency. Therefore, I1 irrigation was better than I0.
Abstract: This paper addresses parameter and state estimation problem in the presence of the perturbation of observer gain bounded input disturbances for the Lipschitz systems that are linear in unknown parameters and nonlinear in states. A new nonlinear adaptive resilient observer is designed, and its stability conditions based on Lyapunov technique are derived. The gain for this observer is derived systematically using linear matrix inequality approach. A numerical example is provided in which the nonlinear terms depend on unmeasured states. The simulation results are presented to show the effectiveness of the proposed method.
Abstract: The finite-difference time-domain (FDTD) method is
one of the most widely used computational methods in
electromagnetic. This paper describes the design of two-dimensional
(2D) FDTD simulation software for transverse magnetic (TM)
polarization using Berenger's split-field perfectly matched layer
(PML) formulation. The software is developed using Matlab
programming language. Numerical examples validate the software.
Abstract: Sweet potato products are necessary for the provision
of essential nutrients in every household, regardless of their poverty
status. Their consumption appears to be highly influenced by socioeconomic
factors, such as malnutrition, food insecurity and
unemployment. Therefore, market availability is crucial for these
cultivars to resolve some of the socio-economic factors. The aim of
the study was to investigate market availability of sweet potato
cultivars in the North West Province. In this study, both qualitative
and quantitative research methodologies were used. Qualitative
methodology was used to explain the quantitative outcomes of the
variables. On the other hand, quantitative results were used to test the
hypothesis. The study used SPSS software to analyse the data. Crosstabulation
and Chi-square statistics were used to obtain the
descriptive and inferential analyses, respectively. The study found
that the Blesbok cultivar is dominating the markets of the North West
Province, with the Monate cultivar dominating in the Bojanala
Platinum (75%) and Dr Ruth Segomotsi Mompati (25%) districts. It
is also found that a unit increase in the supply of sweet potato
cultivars in both local and district municipal markets is accompanied
by a reduced demand of 28% and 33% at district and local markets,
respectively. All these results were found to be significant at p
Abstract: This paper looks into areas not covered by prominent
Agent-Oriented Software Engineering (AOSE) methodologies.
Extensive paper review led to the identification of two issues, first
most of these methodologies almost neglect semantic web and
ontology. Second, as expected, each one has its strength and
weakness and may focus on some phases of the development
lifecycle but not all of the phases. The work presented here builds
extensions to a highly regarded AOSE methodology (MaSE) in order
to cover the areas that this methodology does not concentrate on. The
extensions include introducing an ontology stage for semantic
representation and integrating early requirement specification from a
methodology which mainly focuses on that. The integration involved
developing transformation rules (with the necessary handling of nonmatching
notions) between the two sets of representations and
building the software which automates the transformation. The
application of this integration on a case study is also presented in the
paper. The main flow of MaSE stages was changed to smoothly
accommodate the new additions.
Abstract: Heterogeneity has to be taken into account when
integrating a set of existing information sources into a distributed
information system that are nowadays often based on Service-
Oriented Architectures (SOA). This is also particularly applicable to
distributed services such as event monitoring, which are useful in the
context of Event Driven Architectures (EDA) and Complex Event
Processing (CEP). Web services deal with this heterogeneity at a
technical level, also providing little support for event processing. Our
central thesis is that such a fully generic solution cannot provide
complete support for event monitoring; instead, source specific
semantics such as certain event types or support for certain event
monitoring techniques have to be taken into account. Our core result
is the design of a configurable event monitoring (Web) service that
allows us to trade genericity for the exploitation of source specific
characteristics. It thus delivers results for the areas of SOA, Web
services, CEP and EDA.
Abstract: The amount of urban artificial heat which affects the
urban temperature rise in urban meteorology was investigated in order
to clarify the relationships between urbanization and urban
meteorology in this study.
The results of calculation to identify how urban temperate was
increased through the establishment of a model for measuring the
amount of urban artificial heat and theoretical testing revealed that the
amount of urban artificial heat increased urban temperature by plus or
minus 0.23 ˚ C in 2007 compared with 1996, statistical methods
(correlation and regression analysis) to clarify the relationships
between urbanization and urban weather were as follows.
New design techniques and urban growth management are
necessary from urban growth management point of view suggested
from this research at city design phase to decrease urban temperature
rise and urban torrential rain which can produce urban disaster in terms
of urban meteorology by urbanization.
Abstract: CIM is the standard formalism for modeling management
information developed by the Distributed Management Task
Force (DMTF) in the context of its WBEM proposal, designed to
provide a conceptual view of the managed environment. In this
paper, we propose the inclusion of formal knowledge representation
techniques, based on Description Logics (DLs) and the Web Ontology
Language (OWL), in CIM-based conceptual modeling, and then we
examine the benefits of such a decision. The proposal is specified as a
CIM metamodel level mapping to a highly expressive subset of DLs
capable of capturing all the semantics of the models. The paper shows
how the proposed mapping can be used for automatic reasoning
about the management information models, as a design aid, by means
of new-generation CASE tools, thanks to the use of state-of-the-art
automatic reasoning systems that support the proposed logic and use
algorithms that are sound and complete with respect to the semantics.
Such a CASE tool framework has been developed by the authors and
its architecture is also introduced. The proposed formalization is not
only useful at design time, but also at run time through the use of
rational autonomous agents, in response to a need recently recognized
by the DMTF.
Abstract: Square pipes (pipes with square cross sections) are
being used for various industrial objectives, such as machine
structure components and housing/building elements. The utilization
of them is extending rapidly and widely. Hence, the out-put of those
pipes is increasing and new application fields are continually
developing.
Due to various demands in recent time, the products have to
satisfy difficult specifications with high accuracy in dimensions. The
reshaping process design of pipes with square cross sections;
however, is performed by trial and error and based on expert-s
experience.
In this paper, a computer-aided simulation is developed based on
the 2-D elastic-plastic method with consideration of the shear
deformation to analyze the reshaping process. Effect of various
parameters such as diameter of the circular pipe and mechanical
properties of metal on product dimension and quality can be
evaluated by using this simulation. Moreover, design of reshaping
process include determination of shrinkage of cross section,
necessary number of stands, radius of rolls and height of pipe at each
stand, are investigated. Further, it is shown that there are good
agreements between the results of the design method and the
experimental results.
Abstract: Above Elbow Prosthesis is one of the most commonly
amputated or missing limbs. The research is done for modelling
techniques of upper limb prosthesis and design of high torque, light
weight and compact in size elbow actuator. The purposed actuator
consists of a DC motor, planetary gear set and a harmonic drive. The
calculations show that the actuator is good enough to be used in real
life powered prosthetic upper limb or rehabilitation exoskeleton.
Abstract: This paper presents a compact thermoelectric power generator system based on temperature difference across the element. The system can transfer the burning heat energy to electric energy directly. The proposed system has a thermoelectric generator and a power control box. In the generator, there are 4 thermoelectric modules (TEMs), each of which uses 2 thermoelectric chips (TEs) and 2 cold sinks, 1 thermal absorber, and 1 thermal conduction flat board. In the power control box, there are 1 storing energy device, 1 converter, and 1 inverter. The total net generating power is about 11W. This system uses commercial portable gas stoves or burns timber or the coal as the heat source, which is easily obtained. It adopts solid-state thermoelectric chips as heat inverter parts. The system has the advantages of being light-weight, quite, and mobile, requiring no maintenance, and havng easily-supplied heat source. The system can be used a as long as burning is allowed. This system works well for highly-mobilized outdoors situations by providing a power for illumination, entertainment equipment or the wireless equipment at refuge. Under heavy storms such as typhoon, when the solar panels become ineffective and the wind-powered machines malfunction, the thermoelectric power generator can continue providing the vital power.
Abstract: Histogram equalization is often used in image enhancement, but it can be also used in auto exposure. However, conventional histogram equalization does not work well when many pixels are concentrated in a narrow luminance range.This paper proposes an auto exposure method based on 2-way histogram equalization. Two cumulative distribution functions are used, where one is from dark to bright and the other is from bright to dark. In this paper, the proposed auto exposure method is also designed and implemented for image signal processors with full-HD images.
Abstract: The objective of this paper is to estimate realistic
principal extrusion process parameters by means of artificial neural
network. Conventionally, finite element analysis is used to derive
process parameters. However, the finite element analysis of the
extrusion model does not consider the manufacturing process
constraints in its modeling. Therefore, the process parameters
obtained through such an analysis remains highly theoretical.
Alternatively, process development in industrial extrusion is to a
great extent based on trial and error and often involves full-size
experiments, which are both expensive and time-consuming. The
artificial neural network-based estimation of the extrusion process
parameters prior to plant execution helps to make the actual extrusion
operation more efficient because more realistic parameters may be
obtained. And so, it bridges the gap between simulation and real
manufacturing execution system. In this work, a suitable neural
network is designed which is trained using an appropriate learning
algorithm. The network so trained is used to predict the
manufacturing process parameters.
Abstract: Sharing the manufacturing facility through remote
operation and monitoring of a machining process is challenge for
effective use the production facility. Several automation tools in term
of hardware and software are necessary for successfully remote
operation of a machine. This paper presents a prototype of workpiece
holding attachment for remote operation of milling process by self
configuration the workpiece setup. The prototype is designed with
mechanism to reorient the work surface into machining spindle
direction with high positioning accuracy. Variety of parts geometry
is hold by attachment to perform single setup machining. Pin type
with array pattern additionally clamps the workpiece surface from
two opposite directions for increasing the machining rigidity.
Optimum pins configuration for conforming the workpiece geometry
with minimum deformation is determined through hybrid algorithms,
Genetic Algorithms (GA) and Particle Swarm Optimization (PSO).
Prototype with intelligent optimization technique enables to hold
several variety of workpiece geometry which is suitable for
machining low of repetitive production in remote operation.
Abstract: This paper reports a case study on how a conceptual
and analytical thinking approach was used in Art and Design Department at Multimedia University (Malaysia) in addressing the
issues of one nation and its impact in the society through artworks. The art project was designed for students to increase the know-how
and develop creative thinking in design and communication. Goals of the design project were: (1) to develop creative thinking in design
and communication, (2) to increase student understanding on the
process of problem solving for design work, and (3) to use design
elements and principles to generate interest, attention and emotional responses. An exhibition entitled "One Nation" was showcased to
local and international viewers consisting of the general public, professionals, academics, artists and students. Findings indicate that the project supported several visual art standards, as well as
generated awareness in the society. This project may be of interest to
current and future art educators and others interested in the potential
of utilizing global issues as content for art, community and environment studies for the purpose of educational art.
Abstract: The design of a modern aircraft is based on three pillars: theoretical results, experimental test and computational simulations.
As a results of this, Computational Fluid Dynamic (CFD) solvers are
widely used in the aeronautical field. These solvers require the correct
selection of many parameters in order to obtain successful results. Besides, the computational time spent in the simulation depends on
the proper choice of these parameters.
In this paper we create an expert system capable of making an
accurate prediction of the number of iterations and time required for the convergence of a computational fluid dynamic (CFD) solver.
Artificial neural network (ANN) has been used to design the expert system. It is shown that the developed expert system is capable of making an accurate prediction the number of iterations and time
required for the convergence of a CFD solver.