Abstract: The excessive consumption of fossil energies (electrical energy) during summer caused by the technological development involves more and more climate warming.
In order to reduce the worst impact of gas emissions produced from classical air conditioning, heat driven solar absorption chiller is pretty promising; it consists on using solar as motive energy which is clean and environmentally friendly to provide cold.
Solar absorption machine is composed by four components using Lithium Bromide /water as a refrigerating couple. LiBr- water is the most promising in chiller applications due to high safety, high volatility ratio, high affinity, high stability and its high latent heat. The lithium bromide solution is constitute by the salt lithium bromide which absorbs water under certain conditions of pressure and temperature however if the concentration of the solution is high in the absorption chillers; which exceed 70%, the solution will crystallize.
The main aim of this article is to study the phenomena of the crystallization and to evaluate how the dependence between the electric conductivity and the concentration which should be controlled.
Abstract: The aim of this paper is to emphasize and alleviate the effect of phase noise due to imperfect local oscillators on the performances of a Multi-Carrier CDMA system. After the cancellation of Common Phase Error (CPE), an iterative approach is introduced which iteratively estimates Inter-Carrier Interference (ICI) components in the frequency domain and cancels their contribution in the time domain. Simulation are conducted in order to investigate the achievable performances for several parameters, such as the spreading factor, the modulation order, the phase noise power and the transmission Signal-to-Noise Ratio.
Abstract: The problem of Small Area Estimation (SAE) is complex because of various information sources and insufficient data. In this paper, an approach for SAE is presented for decision-making at national, regional and local level. We propose an Empirical Best Linear Unbiased Predictor (EBLUP) as an estimator in order to combine several information sources to evaluate various indicators. First, we present the urban audit project and its environmental, social and economic indicators. Secondly, we propose an approach for decision making in order to estimate indicators. An application is used to validate the theoretical proposal. Finally, a decision support system is presented based on open-source environment.
Abstract: In this paper we present a technique to speed up
ICA based on the idea of reducing the dimensionality of the data
set preserving the quality of the results. In particular we refer to
FastICA algorithm which uses the Kurtosis as statistical property
to be maximized. By performing a particular Johnson-Lindenstrauss
like projection of the data set, we find the minimum dimensionality
reduction rate ¤ü, defined as the ratio between the size k of the reduced
space and the original one d, which guarantees a narrow confidence
interval of such estimator with high confidence level. The derived
dimensionality reduction rate depends on a system control parameter
β easily computed a priori on the basis of the observations only.
Extensive simulations have been done on different sets of real world
signals. They show that actually the dimensionality reduction is very
high, it preserves the quality of the decomposition and impressively
speeds up FastICA. On the other hand, a set of signals, on which the
estimated reduction rate is greater than 1, exhibits bad decomposition
results if reduced, thus validating the reliability of the parameter β.
We are confident that our method will lead to a better approach to
real time applications.
Abstract: Warehousing is commonly used in factories for the
storage of products until delivery of orders. As the amount of
products stored increases it becomes tedious to be carried out
manually. In recent years, the manual storing has converted into fully
or partially computer controlled systems, also known as Automated
Storage and Retrieval Systems (AS/RS). This paper discusses an
ASRS system, which was designed such that the best storage location
for the products is determined by utilizing a fuzzy control system.
The design maintains the records of the products to be/already in
store and the storage/retrieval times along with the availability status
of the storage locations. This paper discusses on the maintenance of
the above mentioned records and the utilization of the concept of
fuzzy logic in order to determine the optimum storage location for
the products. The paper will further discuss on the dynamic splitting
and merging of the storage locations depending on the product sizes.
Abstract: The curves, of which the square of the distance
between the two points equal to zero, are called minimal or isotropic
curves [4]. In this work, first, necessary and sufficient conditions to
be a Pseudo Helix, which is a special case of such curves, are
presented. Thereafter, it is proven that an isotropic curve-s position
vector and pseudo curvature satisfy a vector differential equation of
fourth order. Additionally, In view of solution of mentioned
equation, position vector of pseudo helices is obtained.
Abstract: The leaching behavior and structure of Li2O-CeO2- Fe2O3-P2O5 glasses incorporated with simulated high level nuclear wastes (HLW) were studied. The leach rates of gross and each constituent element were determined from the total weight loss of the specimen and the leachate analyses by inductively coupled argon plasma spectroscopy (ICP). The gross leach rate of the 4.5Li2O- 9.7CeO2-34.7Fe2O3-51.5P2O5 glass waste form containing 45 mass% simulated HLW is of the order of 10
Abstract: Green- spaces might be very attractive, but
where are the economic benefits? What value do nature and
landscape have for us? What difference will it make to jobs,
health and the economic strength of areas struggling with
deprivation and social problems? [1].There is a need to consider
green spaces from a different perspective. Green planning is not just
about flora and fauna, but also about planning for economic benefits
[2]. It is worth trying to quantify the value of green spaces since
nature and landscape are crucially important to our quality of life and
sustainable development. The reality, however, is that urban
development often takes place at the expense of green spaces.
Urbanization is an ongoing process throughout the world; however,
hyper-urbanization without environmental planning is destructive,
not constructive [3]. Urban spaces are believed to be more valuable
than other land uses, particular green areas, simply because of the
market value connected to urban spaces. However, attractive
landscapes can help raise the quality and value of the urban market
even more. In order to reach these objectives of integrated planning,
the Green-Value-Gap needs to be bridged. Economists have to
understand the concept of Green-Planning and the spinoffs, and
Environmentalists have to understand the importance of urban
economic development and the benefits thereof to green planning. An
interface between Environmental Management, Economic
Development and sustainable Spatial Planning are needed to bridge
the Green-Value-Gap.
Abstract: One of object oriented software developing problem
is the difficulty of searching the appropriate and suitable objects for
starting the system. In this work, ontologies appear in the part of
supporting the object discovering in the initial of object oriented
software developing. There are many researches try to demonstrate
that there is a great potential between object model and ontologies.
Constructing ontology from object model is called ontology
engineering can be done; On the other hand, this research is aiming to
support the idea of building object model from ontology is also
promising and practical. Ontology classes are available online in any
specific areas, which can be searched by semantic search engine.
There are also many helping tools to do so; one of them which are
used in this research is Protégé ontology editor and Visual Paradigm.
To put them together give a great outcome. This research will be
shown how it works efficiently with the real case study by using
ontology classes in travel/tourism domain area. It needs to combine
classes, properties, and relationships from more than two ontologies
in order to generate the object model. In this paper presents a simple
methodology framework which explains the process of discovering
objects. The results show that this framework has great value while
there is possible for expansion. Reusing of existing ontologies offers
a much cheaper alternative than building new ones from scratch.
More ontologies are becoming available on the web, and online
ontologies libraries for storing and indexing ontologies are increasing
in number and demand. Semantic and Ontologies search engines have
also started to appear, to facilitate search and retrieval of online
ontologies.
Abstract: Video sensor networks operate on stringent requirements
of latency. Packets have a deadline within which they have
to be delivered. Violation of the deadline causes a packet to be
treated as lost and the loss of packets ultimately affects the quality
of the application. Network latency is typically a function of many
interacting components. In this paper, we propose ways of reducing
the forwarding latency of a packet at intermediate nodes. The
forwarding latency is caused by a combination of processing delay
and queueing delay. The former is incurred in order to determine the
next hop in dynamic routing. We show that unless link failures in a
very specific and unlikely pattern, a vast majority of these lookups
are redundant. To counter this we propose source routing as the
routing strategy. However, source routing suffers from issues related
to scalability and being impervious to network dynamics. We propose
solutions to counter these and show that source routing is definitely
a viable option in practical sized video networks. We also propose a
fast and fair packet scheduling algorithm that reduces queueing delay
at the nodes. We support our claims through extensive simulation on
realistic topologies with practical traffic loads and failure patterns.
Abstract: This paper at first presents approximate analytical
solutions for systems of fractional differential equations using the
differential transform method. The application of differential
transform method, developed for differential equations of integer
order, is extended to derive approximate analytical solutions of
systems of fractional differential equations. The solutions of our
model equations are calculated in the form of convergent series with
easily computable components. After that a drive-response
synchronization method with linear output error feedback is
presented for “generalized projective synchronization" for a class of
fractional-order chaotic systems via a scalar transmitted signal.
Genesio_Tesi and Duffing systems are used to illustrate the
effectiveness of the proposed synchronization method.
Abstract: Nowadays, many manufacturing companies try to
reinforce their competitiveness or find a breakthrough by considering
collaboration. In Korea, more than 900 manufacturing companies are
using web-based collaboration systems developed by the
government-led project, referred to as i-Manufacturing. The system
supports some similar functions of Product Data Management (PDM)
as well as Project Management System (PMS). A web-based
collaboration system provides many useful functions for collaborative
works. This system, however, does not support new linking services
between buyers and suppliers. Therefore, in order to find new
collaborative partners, this paper proposes a framework which creates
new connections between buyers and suppliers facilitating their
collaboration, referred to as Excellent Manufacturer Scouting System
(EMSS). EMSS plays a role as a bridge between overseas buyers and
suppliers. As a part of study on EMSS, we also propose an evaluation
method of manufacturability of potential partners with six main factors.
Based on the results of evaluation, buyers may get a good guideline to
choose their new partners before getting into negotiation processes
with them.
Abstract: The goal of this work is to describe a new algorithm for finding the optimal variable order, number of nodes for any order and other ROBDD parameters, based on a tabular method. The tabular method makes use of a pre-built backend database table that stores the ROBDD size for selected combinations of min-terms. The user uses the backend table and the proposed algorithm to find the necessary ROBDD parameters, such as best variable order, number of nodes etc. Experimental results on benchmarks are given for this technique.
Abstract: Morphological operators transform the original image
into another image through the interaction with the other image of
certain shape and size which is known as the structure element.
Mathematical morphology provides a systematic approach to analyze
the geometric characteristics of signals or images, and has been
applied widely too many applications such as edge detection,
objection segmentation, noise suppression and so on. Fuzzy
Mathematical Morphology aims to extend the binary morphological
operators to grey-level images. In order to define the basic
morphological operations such as fuzzy erosion, dilation, opening
and closing, a general method based upon fuzzy implication and
inclusion grade operators is introduced. The fuzzy morphological
operations extend the ordinary morphological operations by using
fuzzy sets where for fuzzy sets, the union operation is replaced by a
maximum operation, and the intersection operation is replaced by a
minimum operation.
In this work, it consists of two articles. In the first one, fuzzy set
theory, fuzzy Mathematical morphology which is based on fuzzy
logic and fuzzy set theory; fuzzy Mathematical operations and their
properties will be studied in details. As a second part, the application
of fuzziness in Mathematical morphology in practical work such as
image processing will be discussed with the illustration problems.
Abstract: Gesture recognition is a challenging task for extracting
meaningful gesture from continuous hand motion. In this paper, we propose an automatic system that recognizes isolated gesture,
in addition meaningful gesture from continuous hand motion for Arabic numbers from 0 to 9 in real-time based on Hidden Markov Models (HMM). In order to handle isolated gesture, HMM using
Ergodic, Left-Right (LR) and Left-Right Banded (LRB) topologies is applied over the discrete vector feature that is extracted from stereo
color image sequences. These topologies are considered to different
number of states ranging from 3 to 10. A new system is developed to recognize the meaningful gesture based on zero-codeword detection
with static velocity motion for continuous gesture. Therefore, the
LRB topology in conjunction with Baum-Welch (BW) algorithm for
training and forward algorithm with Viterbi path for testing presents the best performance. Experimental results show that the proposed system can successfully recognize isolated and meaningful gesture and achieve average rate recognition 98.6% and 94.29% respectively.
Abstract: In this paper, we propose a novel adaptive
spatiotemporal filter that utilizes image sequences in order to remove
noise. The consecutive frames include: current, previous and next
noisy frames. The filter proposed in this paper is based upon the
weighted averaging pixels intensity and noise variance in image
sequences. It utilizes the Appropriate Number of Consecutive Frames
(ANCF) based on the noisy pixels intensity among the frames. The
number of consecutive frames is adaptively calculated for each
region in image and its value may change from one region to another
region depending on the pixels intensity within the region. The
weights are determined by a well-defined mathematical criterion,
which is adaptive to the feature of spatiotemporal pixels of the
consecutive frames. It is experimentally shown that the proposed
filter can preserve image structures and edges under motion while
suppressing noise, and thus can be effectively used in image
sequences filtering. In addition, the AWA filter using ANCF is
particularly well suited for filtering sequences that contain segments
with abruptly changing scene content due to, for example, rapid
zooming and changes in the view of the camera.
Abstract: The Zung self-depression scale and Beck Anxiety Inventory were used to study the depression and anxiety levels of Armenian Crohn's disease patients, as well as to reveal the relation between emotional status and placebo effect of these patients. Despite of registered high levels of depression and anxiety, the high placebo rate during investigations was described. The importance of use of psychotherapies for optimal outcomes during treatments of Crohn's disease is obvious.
Abstract: In this paper, we propose a multiple objective optimization model with respect to portfolio selection problem for investors looking forward to diversify their equity investments in a number of equity markets. Based on Markowitz-s M-V model we developed a Fuzzy Mixed Integer Multi-Objective Nonlinear Programming Problem (FMIMONLP) to maximize the investors- future gains on equity markets, reach the optimal proportion of the budget to be invested in different equities. A numerical example with a comprehensive analysis on artificial data from several equity markets is presented in order to illustrate the proposed model and its solution method. The model performed well compared with the deterministic version of the model.
Abstract: This study aims at investigating the empirical
relationships between risk preference, internet preference, and
internet knowledge which are known as user characteristics, in
addition to perceived risk of the customers on the internet purchase
intention. In order to test the relationships between the variables of
model 174, a questionnaire was collected from the students with
previous online experience. For the purpose of data analysis,
confirmatory factor analysis (CFA) and structural equation model
(SEM) was used.
Test results show that the perceived risk affects the internet
purchase intention, and increase or decrease of perceived risk
influences the purchase intention when the customer does the internet
shopping. Other factors such as internet preference, knowledge of the
internet, and risk preference affect the internet purchase intention.
Abstract: In this paper, we present two new one-step iterative
methods based on Thiele-s continued fraction for solving nonlinear
equations. By applying the truncated Thiele-s continued fraction
twice, the iterative methods are obtained respectively. Analysis of
convergence shows that the new methods are fourth-order convergent.
Numerical tests verifying the theory are given and based on the
methods, two new one-step iterations are developed.