Abstract: The investigation in the present paper is to obtain
certain types of relations for the well known hypergeometric functions
by employing the technique of fractional derivative and integral.
Abstract: Iran has several potential for using renewable
energies, so use them could significantly contribute to energy supply.
The purpose of this paper is to identify the potential of the country
and select the appropriate DG technologies with consideration the
potential and primary energy resources in the regions. In this context,
hybrid energy systems proportionate with the potential of different
regions will be determined based on technical, economic, and
environmental aspect. In the following the proposed structure will be
optimized in terms of size and cost. DG technologies used in this
project include photovoltaic system, wind turbine, diesel generator
and battery bank. The HOMER software is applied for choosing the
appropriate structure and the optimization of system sizing. The
results have been analyzed in terms of technical and economic. The
performance and the cost of each project demonstrate the appropriate
structure of hybrid energy system in that region.
Abstract: The tombolo of Giens is located in the town of Hyères
(France). We recall the history of coastal erosion, and prominent
factors affecting the evolution of the western tombolo. We then
discuss the possibility of stabilizing the western tombolo. Our
argumentation relies on a coupled model integrating swells, currents,
water levels and sediment transport. We present the conclusions of
the simulations of various scenarios, including pre-existing
propositions from coastal engineering offices. We conclude that
beach replenishment seems to be necessary but not sufficient for the
stabilization of the beach. Breakwaters reveal effective particularly in
the most exposed northern area. Some solutions fulfill conditions so
as to be elected as satisfactory. We give a comparative analysis of the
efficiency of 14 alternatives for the protection of the tombolo.
Abstract: The use of technology in the classroom is an issue that
is constantly evolving. Digital age students learn differently than their
teachers did, so now the teacher should be constantly evolving their
methods and teaching techniques to be more in touch with the
student. In this paper a case study presents how were used some of
these technologies by accompanying a classroom course, this in order
to provide students with a different and innovative experience as their
teacher usually presented the activities to develop. As students
worked in the various activities, they increased their digital skills by
employing unknown tools that helped them in their professional
training. The twenty-first century teacher should consider the use of
Information and Communication Technologies in the classroom
thinking in skills that students of the digital age should possess. It
also takes a brief look at the history of distance education and it is
also highlighted the importance of integrating technology as part of
the student's training.
Abstract: The purpose of this study is to forecast the influences
of information and communication technology (ICT) on the structural
changes of Japanese economies. In this study, input-output (IO) and
statistical approaches are used as analysis instruments. More
specifically, this study employs Leontief IO coefficients and
constrained multivariate regression (CMR) model in order to achieve
the purpose. The periods of initial and forecast in this study are 2005
and 2015, respectively. In this study, ICT is represented by ICT capital
stocks. This study conducts two levels of analysis, namely macro and
micro. The results of macro level analysis show that the dynamics of
Japanese economies on the forecast period, relative to the initial period,
are not so high. We focus on (1) commerce, (2) business services and
office supplies, and (3) personal services sectors when conducting the
analysis of the micro level. Further, we analyze its specific IO
coefficients when doing this analysis. The results of the analysis
explain that ICT gives a strong influence on the changes of these
coefficients from initial to forecast periods.
Abstract: The aim of this paper is to give an assessment of
environmental effects of IPPC permit conditions of installations that
are in specific territory with high concentration of industrial
activities.
The IPPC permit is the permit that each operator should hold to
operate the installation as stated by the directive 2010/75/UE on
industrial emissions (integrated pollution prevention and control),
known as IED (Industrial Emissions Directive).
The IPPC permit includes all the measures necessary to achieve a
high level of protection of the environment as a whole, also defining
the monitoring requirements as measurement methodology,
frequency and evaluation procedure. The emissions monitoring of a
specific plant may also give indications of the contribution of these
emissions on the air quality of a definite area.
So, it is clear that the IPPC permits are important tools both to
improve the environmental framework and to achieve the air quality
standards, assisting to assess the possible industrial sources
contributions to air pollution.
Abstract: An analysis is carried out to investigate the effect of
magnetic field and heat source on the steady boundary layer flow and
heat transfer of a Casson nanofluid over a vertical cylinder stretching
exponentially along its radial direction. Using a similarity
transformation, the governing mathematical equations, with the
boundary conditions are reduced to a system of coupled, non –linear
ordinary differential equations. The resulting system is solved
numerically by the fourth order Runge – Kutta scheme with shooting
technique. The influence of various physical parameters such as
Reynolds number, Prandtl number, magnetic field, Brownian motion
parameter, thermophoresis parameter, Lewis number and the natural
convection parameter are presented graphically and discussed for non
– dimensional velocity, temperature and nanoparticle volume
fraction. Numerical data for the skin – friction coefficient, local
Nusselt number and the local Sherwood number have been tabulated
for various parametric conditions. It is found that the local Nusselt
number is a decreasing function of Brownian motion parameter Nb
and the thermophoresis parameter Nt.
Abstract: In this paper we describe one critical research
program within a complex, ongoing multi-year project (2010 to 2014
inclusive) with the overall goal to improve the learning outcomes for
first year undergraduate commerce/business students within an
Information Systems (IS) subject with very large enrolment. The
single research program described in this paper is the analysis of
student attitudes and decision making in relation to the availability of
formative assessment feedback via Web-based real time conferencing
and document exchange software (Adobe Connect). The formative
assessment feedback between teaching staff and students is in respect
of an authentic problem-based, team-completed assignment. The
analysis of student attitudes and decision making is investigated via
both qualitative (firstly) and quantitative (secondly) application of the
Theory of Planned Behavior (TPB) with a two statistically-significant
and separate trial samples of the enrolled students. The initial
qualitative TPB investigation revealed that perceived self-efficacy,
improved time-management, and lecturer-student relationship
building were the major factors in shaping an overall favorable
student attitude to online feedback, whilst some students expressed
valid concerns with perceived control limitations identified within the
online feedback protocols. The subsequent quantitative TPB
investigation then confirmed that attitude towards usage, subjective
norms surrounding usage, and perceived behavioral control of usage
were all significant in shaping student intention to use the online
feedback protocol, with these three variables explaining 63 percent of
the variance in the behavioral intention to use the online feedback
protocol. The identification in this research of perceived behavioral
control as a significant determinant in student usage of a specific
technology component within a virtual learning environment (VLE)
suggests that VLEs could now be viewed not as a single, atomic
entity, but as a spectrum of technology offerings ranging from the
mature and simple (e.g., email, Web downloads) to the cutting-edge
and challenging (e.g., Web conferencing and real-time document
exchange). That is, that all VLEs should not be considered the same.
The results of this research suggest that tertiary students have the
technological sophistication to assess a VLE in this more selective
manner.
Abstract: Collaborative technologies or software known as
groupware are key enabling tools for communication, collaboration
and co-ordination among individuals, work groups and businesses.
Available reviews of the groupware literature are very few,
and mostly neither systematic nor recent.
This paper is an effort to fill this gap, and to provide researchers,
with a more up-to-date and wide systematic literature review. For this
purpose, 1087 scholarly articles, published from 1990 to 2013, on the
topic of groupware, were collected by the literature search. The study
here adopted the systematic approach of lexical analysis for the
analysis of those articles.
Abstract: Verification and Validation of Simulated Process
Model is the most important phase of the simulator life cycle.
Evaluation of simulated process models based on Verification and
Validation techniques checks the closeness of each component model
(in a simulated network) with the real system/process with respect to
dynamic behaviour under steady state and transient conditions. The
process of Verification and Validation helps in qualifying the process
simulator for the intended purpose whether it is for providing
comprehensive training or design verification. In general, model
verification is carried out by comparison of simulated component
characteristics with the original requirement to ensure that each step
in the model development process completely incorporates all the
design requirements. Validation testing is performed by comparing
the simulated process parameters to the actual plant process
parameters either in standalone mode or integrated mode.
A Full Scope Replica Operator Training Simulator for PFBR -
Prototype Fast Breeder Reactor has been developed at IGCAR,
Kalpakkam, INDIA named KALBR-SIM (Kalpakkam Breeder
Reactor Simulator) where in the main participants are
engineers/experts belonging to Modeling Team, Process Design and
Instrumentation & Control design team. This paper discusses about
the Verification and Validation process in general, the evaluation
procedure adopted for PFBR operator training Simulator, the
methodology followed for verifying the models, the reference
documents and standards used etc. It details out the importance of
internal validation by design experts, subsequent validation by
external agency consisting of experts from various fields, model
improvement by tuning based on expert’s comments, final
qualification of the simulator for the intended purpose and the
difficulties faced while co-coordinating various activities.
Abstract: This work presents synthesis of α,ω-dithienyl
terminated poly(ethylene glycol) (PEGTh) capable for further chain
extension by either chemical or electrochemical polymeriztion.
PEGTh was characterized by FTIR and 1H-NMR. Further
copolymerization of PEGTh and pyrrole (Py) was performed by
chemical oxidative polymerization using ceric (IV) salt as an oxidant
(PPy-PEGTh). PEG without end group modification was used
directly to prepare copolymers with Py by Ce (IV) salt (PPy-PEG).
Block copolymers with mole ratio of pyrrole to PEGTh (PEG) 50:1
and 10:1 were synthesized. The electrical conductivities of
copolymers PPy-PEGTh and PPy-PEG were determined by four
point probe technique. Influence of the synthetic route and content of
the insulating segment on conductivity and yield of the copolymers
were investigated.
Abstract: The emerging Cognitive Radio is combo of both the
technologies i.e. Radio dynamics and software technology. It involve
wireless system with efficient coding, designing, and making them
artificial intelligent to take the decision according to the surrounding
environment and adopt themselves accordingly, so as to deliver the
best QoS. This is the breakthrough from fixed hardware and fixed
utilization of the spectrum. This software-defined approach of
research is centralized at user-definition and application driven
model, various software method are used for the optimization of the
wireless communication. This paper focused on the Spectrum
allocation technique using genetic algorithm GA to evolve radio,
represented by chromosomes. The chromosomes gene represents the
adjustable parameters in given radio and by using GA, evolving over
the generations, the optimized set of parameters are evolved, as per
the requirement of user and availability of the spectrum, in our
prototype the gene consist of 6 different parameters, and the best set
of parameters are evolved according to the application need and
availability of the spectrum holes and thus maintaining best QoS for
user, simultaneously maintaining licensed user rights. The analyzing
tool Matlab is used for the performance of the prototype.
Abstract: Different tools and technologies were implemented
for Crisis Response and Management (CRM) which is generally
using available network infrastructure for information exchange.
Depending on type of disaster or crisis, network infrastructure could
be affected and it could not be able to provide reliable connectivity.
Thus any tool or technology that depends on the connectivity could
not be able to fulfill its functionalities. As a solution, a new message
exchange framework has been developed. Framework provides
offline/online information exchange platform for CRM Information
Systems (CRMIS) and it uses XML compression and packet
prioritization algorithms and is based on open source web
technologies. By introducing offline capabilities to the web
technologies, framework will be able to perform message exchange
on unreliable networks. The experiments done on the simulation
environment provide promising results on low bandwidth networks
(56kbps and 28.8 kbps) with up to 50% packet loss and the solution is
to successfully transfer all the information on these low quality
networks where the traditional 2 and 3 tier applications failed.
Abstract: Managing and improving efficiency in the current
highly competitive global automotive industry demands that those
companies adopt leaner and more flexible systems. During the past
20 years the domestic automotive industry in North America has been
focusing on establishing new management strategies in order to meet
market demands. The lean management process also known as
Toyota Manufacturing Process (TPS) or lean manufacturing
encompasses tools and techniques that were established in order to
provide the best quality product with the fastest lead time at the
lowest cost. The following paper presents a study that focused on
improving labor efficiency at one of the Big Three (Ford, GM,
Chrysler LLC) domestic automotive facility in North America. The
objective of the study was to utilize several lean management tools in
order to optimize the efficiency and utilization levels at the “Pre-
Marriage” chassis area in a truck manufacturing and assembly
facility. Utilizing three different lean tools (i.e. Standardization of
work, 7 Wastes, and 5S) this research was able to improve efficiency
by 51%, utilization by 246%, and reduce operations by 14%. The
return on investment calculated based on the improvements made
was 284%.
Abstract: Fast changing knowledge systems on the Internet can
be accessed more efficiently with the help of automatic document
summarization and updating techniques. The aim of multi-document
update summary generation is to construct a summary unfolding the
mainstream of data from a collection of documents based on the
hypothesis that the user has already read a set of previous documents.
In order to provide a lot of semantic information from the documents,
deeper linguistic or semantic analysis of the source documents were
used instead of relying only on document word frequencies to select
important concepts. In order to produce a responsive summary,
meaning oriented structural analysis is needed. To address this issue,
the proposed system presents a document summarization approach
based on sentence annotation with aspects, prepositions and named
entities. Semantic element extraction strategy is used to select
important concepts from documents which are used to generate
enhanced semantic summary.
Abstract: Exact solution of an unsteady flow of elastico-viscous
fluid through a porous media in a tube of spherical cross section
under the influence of constant pressure gradient has been obtained in
this paper. Initially, the flow is generated by a constant pressure
gradient. After attaining the steady state, the pressure gradient is
suddenly withdrawn and the resulting fluid motion in a tube of
spherical cross section by taking into account of the porosity factor of
the bounding surface is investigated. The problem is solved in twostages
the first stage is a steady motion in tube under the influence of
a constant pressure gradient, the second stage concern with an
unsteady motion. The problem is solved employing separation of
variables technique. The results are expressed in terms of a nondimensional
porosity parameter (K) and elastico-viscosity parameter
(β), which depends on the Non-Newtonian coefficient. The flow
parameters are found to be identical with that of Newtonian case as
elastic-viscosity parameter tends to zero and porosity tends to
infinity. It is seen that the effect of elastico-viscosity parameter,
porosity parameter of the bounding surface has significant effect on
the velocity parameter.
Abstract: The research presented in this paper has been focused
on analysing the impact of traffic on the sustainable development of
tourism in Croatia's Dubrovacko-Neretvanska County by the year
2020, based on the figures and trends reported in 2014 and using the
relevant variables that characterise the synergy of traffic and tourism
in, speaking from the geographic viewpoint, the most problematic
county in the Republic of Croatia. The basic hypothesis has been
confirmed through scientifically obtained research results, through
the quantification of the model's variables and the direct growth rates
of the designed model. On the basis of scientific insights into the
sustainable development of traffic and tourism in Dubrovacko-
Neretvanska County, it is possible to propose a new information
model for traffic at the service of the sustainable development of
tourism in the County for the period 2014-2020.
Abstract: In the present work, the alloy of Bismuth-lead is
prepared on the basis of percentage of molecular weight 9:1, 5:5 and
1:9 ratios and grown by Zone- Refining Technique under a vacuum
atmosphere. The EDAX of these samples are done and the results are
reported. Micro hardness test has been used as an alternative test for
measuring material’s tensile properties. The effect of temperature and
load on the hardness of the grown alloy has been studied. Further the
comparative studies of work hardening coefficients are reported.
Abstract: Construction cost estimation is one of the most
important aspects of construction project design. For generations, the
process of cost estimating has been manual, time-consuming and
error-prone. This has partly led to most cost estimates to be unclear
and riddled with inaccuracies that at times lead to over- or underestimation
of construction cost. The development of standard set of
measurement rules that are understandable by all those involved in a
construction project, have not totally solved the challenges. Emerging
Building Information Modelling (BIM) technologies can exploit
standard measurement methods to automate cost estimation process
and improve accuracies. This requires standard measurement
methods to be structured in ontological and machine readable format;
so that BIM software packages can easily read them. Most standard
measurement methods are still text-based in textbooks and require
manual editing into tables or Spreadsheet during cost estimation. The
aim of this study is to explore the development of an ontology based
on New Rules of Measurement (NRM) commonly used in the UK for
cost estimation. The methodology adopted is Methontology, one of
the most widely used ontology engineering methodologies. The
challenges in this exploratory study are also reported and
recommendations for future studies proposed.
Abstract: The increasing demand of gallium, indium and
rare-earth elements for the production of electronics, e.g. solid
state-lighting, photovoltaics, integrated circuits, and liquid crystal
displays, will exceed the world-wide supply according to current
forecasts. Recycling systems to reclaim these materials are not yet in
place, which challenges the sustainability of these technologies. This
paper proposes a multispectral imaging system as a basis for a vision
based recognition system for valuable components of electronics
waste. Multispectral images intend to enhance the contrast of images
of printed circuit boards (single components, as well as labels) for
further analysis, such as optical character recognition and entire
printed circuit board recognition. The results show, that a higher
contrast is achieved in the near infrared compared to ultraviolett and
visible light.