Abstract: Midpoint filter is quite effective in recovering the
images confounded by the short-tailed (uniform) noise. It, however,
performs poorly in the presence of additive long-tailed (impulse)
noise and it does not preserve the edge structures of the image
signals. Median smoother discards outliers (impulses) effectively, but
it fails to provide adequate smoothing for images corrupted with nonimpulse
noise. In this paper, two nonlinear techniques for image
filtering, namely, New Filter I and New Filter II are proposed based
on a nonlinear high-pass filter algorithm. New Filter I is constructed
using a midpoint filter, a highpass filter and a combiner. It suppresses
uniform noise quite well. New Filter II is configured using an alpha
trimmed midpoint filter, a median smoother of window size 3x3, the
high pass filter and the combiner. It is robust against impulse noise
and attenuates uniform noise satisfactorily. Both the filters are shown
to exhibit good response at the image boundaries (edges). The
proposed filters are evaluated for their performance on a test image
and the results obtained are included.
Abstract: PROFIBUS (PROcess FIeld BUS) which is defined with international standarts (IEC61158, EN50170) is the most popular fieldbus, and provides a communication between industrial applications which are located in different control environment and location in manufacturing, process and building automation. Its communication speed is from 9.6 Kbps to 12 Mbps over distances from 100 to 1200 meters, and so it is to be often necessary to interconnect them in order to break these limits. Unfortunately this interconnection raises several issues and the solutions found so far are not very satisfactory. In this paper, we propose a new solution to interconnect PROFIBUS segments, which uses a wireless MAN based on the IEEE 802.16 standard as a backbone system. Also, the solution which is described a model for internetworking unit integrates the traffic generated by PROFIBUS segments into IEEE 802.16 wireless MAN using encapsulation technique.
Abstract: Most of researches for conventional simulations were
studied focusing on flocks with a single species. While there exist the
flocking behaviors with a single species in nature, the flocking
behaviors are frequently observed with multi-species. This paper
studies on the flocking simulation for heterogeneous agents. In order
to simulate the flocks for heterogeneous agents, the conventional
method uses the identifier of flock, while the proposed method defines
the feature vector of agent and uses the similarity between agents by
comparing with those feature vectors. Based on the similarity, the
paper proposed the attractive force and repulsive force and then
executed the simulation by applying two forces. The results of
simulation showed that flock formation with heterogeneous agents is
very natural in both cases. In addition, it showed that unlike the
existing method, the proposed method can not only control the density
of the flocks, but also be possible for two different groups of agents to
flock close to each other if they have a high similarity.
Abstract: Together with the industrialization, women began to
be included in business life by peeling off of the tasks given them by
society and they have become a factor of production creating value in
economic and social sense. Thus, women have taken place in the
labor market, majority of which has been formed by men. In this
study, the experiences of women entrepreneurs, who succeed in
business activities, will be analyzed. By the study, current state of the
women entrepreneurs in the labor market of Turkey will be put down,
as a result of interferences obtained from the shared experiences of
women entrepreneurs. Findings obtained at the end of the study are
thought to light the way of future studies for increasing women
entrepreneurship.
Abstract: Language Reforms and potential use of ICTs has been a focal area of Higher Education Commission of Pakistan. Efforts are being accelerated to incorporate fast expanding ICTs to bring qualitative improvement in language instruction in higher education. This paper explores how university teachers are benefitting from ICTs to make their English class effective and what type of problems they face in practicing ICTs during their lectures. An in-depth qualitative study was employed to understand why language teachers tend to use ICTs in their instruction and how they are practicing it. A sample of twenty teachers from five universities located in Islamabad, three from public sector and two from private sector, was selected on non-random (Snowball) sampling basis. An interview with 15 semi-structured items was used as research instruments to collect data. The findings reveal that business English teaching is facilitated and improved through the use of ICTs. The language teachers need special training regarding the practices and implementation of ICTs. It is recommended that initiatives might be taken to equip university language teachers with modern methodology incorporating ICTs as focal area and efforts might be made to remove barriers regarding the training of language teachers and proper usage of ICTs.
Abstract: The fast growth in complexity coupled with requests for shorter development periods for embedded systems are bringing demands towards a more effective, i.e. higher-abstract, design process for hardaware/software integrated design. In Software Engineering area, Model Driven Architecture (MDA) and Executable UML (xUML) has been accepted to bring further improvement in software design. This paper constructs MDA and xUML stepwise transformations from an abstract specification model to a more concrete implementation model using the refactoring technique for hardaware/software integrated design. This approach provides clear and structured models which enables quick exploration and synthesis, and early stage verification.
Abstract: Hybrid photovoltaic thermal (PV/T) solar system comprises a solar collector which is disposed on photovoltaic solar cells. The disadvantage of a conventional photovoltaic cell is that its performance decreases as the temperature increases. Indeed, part of the solar radiation is converted into electricity and is dissipated as heat, increasing the temperature of the photovoltaic cell with respect to the ambient temperature. The objective of this work is to study experimentally and implement a hybrid prototype to evaluate electrical and thermal performance. In this paper, an experimental study of two new configurations of hybrid collectors is exposed. The results are given and interpreted. The two configurations of absorber studied are a new combination with tubes and galvanized tank, the other is a tubes and sheet.
Abstract: There are multiple ways to implement a decimator
filter. This paper addresses usage of CIC (cascaded-integrator-comb)
filter and HB (half band) filter as the decimator filter to reduce the
frequency sample rate by factor of 64 and detail of the
implementation step to realize this design in hardware. Low power
design approach for CIC filter and half band filter will be discussed.
The filter design is implemented through MATLAB system
modeling, ASIC (application specific integrated circuit) design flow
and verified using a FPGA (field programmable gate array) board
and MATLAB analysis.
Abstract: In this work, position vector of a time-like dual curve
according to standard frame of D31
is investigated. First, it is proven
that position vector of a time-like dual curve satisfies a dual vector
differential equation of fourth order. The general solution of this dual
vector differential equation has not yet been found. Due to this, in
terms of special solutions, position vectors of some special time-like
dual curves with respect to standard frame of D31
are presented.
Abstract: A new reverse phase-high performance liquid chromatography (RP-HPLC) method with fluorescent detector (FLD) was developed and optimized for Norfloxacin determination in human plasma. Mobile phase specifications, extraction method and excitation and emission wavelengths were varied for optimization. HPLC system contained a reverse phase C18 (5 μm, 4.6 mm×150 mm) column with FLD operated at excitation 330 nm and emission 440 nm. The optimized mobile phase consisted of 14% acetonitrile in buffer solution. The aqueous phase was prepared by mixing 2g of citric acid, 2g sodium acetate and 1 ml of triethylamine in 1 L of Milli-Q water was run at a flow rate of 1.2 mL/min. The standard curve was linear for the range tested (0.156–20 μg/mL) and the coefficient of determination was 0.9978. Aceclofenac sodium was used as internal standard. A detection limit of 0.078 μg/mL was achieved. Run time was set at 10 minutes because retention time of norfloxacin was 0.99 min. which shows the rapidness of this method of analysis. The present assay showed good accuracy, precision and sensitivity for Norfloxacin determination in human plasma with a new internal standard and can be applied pharmacokinetic evaluation of Norfloxacin tablets after oral administration in human.
Abstract: In this paper, we introduce an mobile agent framework
with proactive load balancing for ambient intelligence (AmI) environments.
One of the main obstacles of AmI is the scalability in
which the openness of AmI environment introduces dynamic resource
requirements on agencies. To mediate this scalability problem, our
framework proposes a load balancing module to proactively analyze
the resource consumption of network bandwidth and preferred agencies
to suggest the optimal communication method to its user. The
framework generally formulates an AmI environment that consists
of three main components: (1) mobile devices, (2) hosts or agencies,
and (3) directory service center (DSC). A preliminary implementation
was conducted with NetLogo and the experimental results show that
the proposed approach provides enhanced system performance by
minimizing the network utilization to provide users with responsive
services.
Abstract: Textile structures are engineered and fabricated to
meet worldwide structural applications. Nevertheless, research
varying textile structure on natural fibre as composite reinforcement
was found to be very limited. Most of the research is focusing on
short fibre and random discontinuous orientation of the reinforcement
structure. Realizing that natural fibre (NF) composite had been
widely developed to be used as synthetic fibre composite
replacement, this research attempted to examine the influence of
woven and cross-ply laminated structure towards its mechanical
performances. Laminated natural fibre composites were developed
using hand lay-up and vacuum bagging technique. Impact and
flexural strength were investigated as a function of fibre type (coir
and kenaf) and reinforcement structure (imbalanced plain woven,
0°/90° cross-ply and +45°/-45° cross-ply). Multi-level full factorial
design of experiment (DOE) and analysis of variance (ANOVA) was
employed to impart data as to how fibre type and reinforcement
structure parameters affect the mechanical properties of the
composites. This systematic experimentation has led to determination
of significant factors that predominant influences the impact and
flexural properties of the textile composites. It was proven that both
fibre type and reinforcement structure demonstrated significant
difference results. Overall results indicated that coir composite and
woven structure exhibited better impact and flexural strength. Yet,
cross-ply composite structure demonstrated better fracture resistance.
Abstract: one of the significant factors for improving the
accuracy of Land Surface Temperature (LST) retrieval is the correct
understanding of the directional anisotropy for thermal radiance. In
this paper, the multiple scattering effect between heterogeneous
non-isothermal surfaces is described rigorously according to the
concept of configuration factor, based on which a directional thermal
radiance model is built, and the directional radiant character for urban
canopy is analyzed. The model is applied to a simple urban canopy
with row structure to simulate the change of Directional Brightness
Temperature (DBT). The results show that the DBT is aggrandized
because of the multiple scattering effects, whereas the change range of
DBT is smoothed. The temperature difference, spatial distribution,
emissivity of the components can all lead to the change of DBT. The
“hot spot" phenomenon occurs when the proportion of high
temperature component in the vision field came to a head. On the other
hand, the “cool spot" phenomena occur when low temperature
proportion came to the head. The “spot" effect disappears only when
the proportion of every component keeps invariability. The model
built in this paper can be used for the study of directional effect on
emissivity, the LST retrieval over urban areas and the adjacency effect
of thermal remote sensing pixels.
Abstract: The design of a landing gear is one of the fundamental aspects of aircraft design. The need for a light weight, high strength, and stiffness characteristics coupled with techno economic feasibility are a key to the acceptability of any landing gear construction. In this paper, an approach for analyzing two different designed landing gears for an unmanned aircraft vehicle (UAV) using advanced CAE techniques will be applied. Different landing conditions have been considered for both models. The maximum principle stresses for each model along with the factor of safety are calculated for every loading condition. A conclusion is drawing about better geometry.
Abstract: The Romanian government has been making
significant attempts to make its services and information available on
the Internet. According to the UN e-government survey conducted in
2008, Romania comes under mid range countries by utilization of egovernment
(percent of utilization 41%). Romania-s national portal
www.e-guvernare.ro aims at progressively making all services and
information accessible through the portal. However, the success of
these efforts depends, to a great extent, on how well the targeted
users for such services, citizens in general, make use of them. For
this reason, the purpose of the presented study was to identify what
factors could affect the citizens' adoption of e-government services.
The study is an extension of the Technology Acceptance Model. The
proposed model was validated using data collected from 481 citizens.
The results provided substantial support for all proposed hypotheses
and showed the significance of the extended constructs.
Abstract: Solar power plants(SPPs) have shown a lot of good outcomes
in providing a various functions depending on industrial expectations by
deploying ad-hoc networking with helps of light loaded and battery powered
sensor nodes. In particular, it is strongly requested to develop an algorithm to
deriver the sensing data from the end node of solar power plants to the sink node
on time. In this paper, based on the above observation we have proposed an
IEEE802.15.4 based self routing scheme for solar power plants. The proposed
beacon based priority routing Algorithm (BPRA) scheme utilizes beacon
periods in sending message with embedding the high priority data and thus
provides high quality of service(QoS) in the given criteria. The performance
measures are the packet Throughput, delivery, latency, total energy
consumption. Simulation results under TinyOS Simulator(TOSSIM) have
shown the proposed scheme outcome the conventional Ad hoc On-Demand
Distance Vector(AODV) Routing in solar power plants.
Abstract: An overview of the important aspects of managing
and controlling industrial effluent discharges to public sewers namely
sampling, characterization, quantification and legislative controls has
been presented. The findings have been validated by means of a case
study covering three industrial sectors namely, tanning, textile
finishing and food processing industries. Industrial effluents
discharges were found to be best monitored by systematic and
automatic sampling and quantified using water meter readings
corrected for evaporative and consumptive losses. Based on the
treatment processes employed in the public owned treatment works
and the chemical oxygen demand and biochemical oxygen demand
levels obtained, the effluent from all the three industrial sectors
studied were found to lie in the toxic zone. Thus, physico-chemical
treatment of these effluents is required to bring them into the
biodegradable zone. KL values (quoted to base e) were greater than
0.50 day-1 compared to 0.39 day-1 for typical municipality
wastewater.
Abstract: Over the years, there is a growing trend towards
quality-based specifications in highway construction. In many
Quality Control/Quality Assurance (QC/QA) specifications, the
contractor is primarily responsible for quality control of the process,
whereas the highway agency is responsible for testing the acceptance
of the product. A cooperative investigation was conducted in Illinois
over several years to develop a prototype End-Result Specification
(ERS) for asphalt pavement construction. The final characteristics of
the product are stipulated in the ERS and the contractor is given
considerable freedom in achieving those characteristics. The risk for
the contractor or agency depends on how the acceptance limits and
processes are specified. Stochastic simulation models are very useful
in estimating and analyzing payment risk in ERS systems and these
form an integral part of the Illinois-s prototype ERS system. This
paper describes the development of an innovative methodology to
estimate the variability components in in-situ density, air voids and
asphalt content data from ERS projects. The information gained from
this would be crucial in simulating these ERS projects for estimation
and analysis of payment risks associated with asphalt pavement
construction. However, these methods require at least two parties to
conduct tests on all the split samples obtained according to the
sampling scheme prescribed in present ERS implemented in Illinois.
Abstract: A key element of many distribution systems is the
routing and scheduling of vehicles servicing a set of customers. A
wide variety of exact and approximate algorithms have been
proposed for solving the vehicle routing problems (VRP). Exact
algorithms can only solve relatively small problems of VRP, which is
classified as NP-Hard. Several approximate algorithms have proven
successful in finding a feasible solution not necessarily optimum.
Although different parts of the problem are stochastic in nature; yet,
limited work relevant to the application of discrete event system
simulation has addressed the problem. Presented here is optimization
using simulation of VRP; where, a simplified problem has been
developed in the ExtendSimTM simulation environment; where,
ExtendSimTM evolutionary optimizer is used to minimize the total
transportation cost of the problem. Results obtained from the model
are very satisfactory. Further complexities of the problem are
proposed for consideration in the future.
Abstract: The Internet and the ever growing applications enable
communities to share and collaborate through common platforms.
However, this growing pattern is not witnessed yet even for elearning.
This paper is based on a doctoral research which aimed at
researching the ways students interact in an online campus and the
supports that they look for and require. Content analysis, based on the
Panchoo/Jaillet methodology, was done on four synchronous
meetings between a tutor and his ten students. The UNIV-Rct ecampus,
analogical to a physical campus, was found to be user
friendly and the students enrolled in a master-s course faced no
difficulties in using it. In addition to the environmental aspects, the
pedagogical implementation of the course has driven the students to
interact and collaborate significantly and this has contributed to
overcome the problems faced by the distance learners. This
completely online model was found to be fruitful in helping distant
learners fight their loneliness and brave their difficulties in a socioconstructivism
approach.