Abstract: This paper proposes the hypothesis that multilateralism and regionalism are complementary, and that regional income convergence is likely with a like minded and committed regionalism that often has links geographically and culturally. The association between international trade, income per capita, and regional income convergence in founder members of ASEAN and SAARC, is explored by applying the Lumsdaine, and Papell approach. The causal relationships between the above variables are also studied in respective trade blocs by using Granger causality tests. The conclusion is that global reforms have had a greater impact on increasing trade for both trade blocs and induced convergence only in ASEAN-5 countries. The experience of ASEAN countries shows a two-way causal relationship between the flow from trade to regional income convergence, and vice versa. There is no evidence in SAARC countries for income convergence and causality.
Abstract: In this paper we propose an NLP-based method for
Ontology Population from texts and apply it to semi automatic
instantiate a Generic Knowledge Base (Generic Domain Ontology) in
the risk management domain. The approach is semi-automatic and
uses a domain expert intervention for validation. The proposed
approach relies on a set of Instances Recognition Rules based on
syntactic structures, and on the predicative power of verbs in the
instantiation process. It is not domain dependent since it heavily
relies on linguistic knowledge.
A description of an experiment performed on a part of the
ontology of the PRIMA1 project (supported by the European
community) is given. A first validation of the method is done by
populating this ontology with Chemical Fact Sheets from
Environmental Protection Agency2. The results of this experiment
complete the paper and support the hypothesis that relying on the
predicative power of verbs in the instantiation process improves the
performance.
Abstract: Academia-industry relationship is not like that of
technology donator-acceptor, but is of interactive and collaborative
nature, acknowledging and ensuring mutual respect for each other-s
role and contributions with an eye to attaining the true purpose of
such relationships, namely, bringing about research-outcome
synergy. Indeed, academia-industry interactions are a system that
requires active and collaborative participations of all the
stakeholders.
This paper examines various issues associated with academic
institutions and industry collaboration with special attention to the
nature of resources and potentialities of stakeholders in the context of
knowledge management. This paper also explores the barriers of
academia-industry interaction. It identifies potential areas where
industry-s participation with academia would be most effective for
synergism. Lastly, this paper proposes an integrated model of several
new collaborative approaches that are possible, mainly in the Indian
scenario to strengthen academia-industry interface.
Abstract: Spare parts inventory management is one of the major
areas of inventory research. Analysis of recent literature showed that
an approach integrating spare parts classification, demand
forecasting, and stock control policies is essential; however, adapting
this integrated approach is limited. This work presents an integrated
framework for spare part inventory management and an Excel based
application developed for the implementation of the proposed
framework. A multi-criteria analysis has been used for spare
classification. Forecasting of spare parts- intermittent demand has
been incorporated into the application using three different
forecasting models; namely, normal distribution, exponential
smoothing, and Croston method. The application is also capable of
running with different inventory control policies. To illustrate the
performance of the proposed framework and the developed
application; the framework is applied to different items at a service
organization. The results achieved are presented and possible areas
for future work are highlighted.
Abstract: Current OCR technology does not allow to
accurately recognizing small text images, such as those found
in web images. Our goal is to investigate new approaches to
recognize very low resolution text images containing antialiased
character shapes.
This paper presents a preliminary study on the variability of
such characters and the feasibility to discriminate them by
using geometrical features. In a first stage we analyze the
distribution of these features. In a second stage we present a
study on the discriminative power for recognizing isolated
characters, using various rendering methods and font
properties. Finally we present interesting results of our
evaluation tests leading to our conclusion and future focus.
Abstract: As a simple to method estimate the plant heating energy
capacity of an apartment complex, a new load calculation method has
been proposed. The method which can be called as unit building
method, predicts the heating load of the entire complex instead of
summing up that of each apartment belonging to complex.
Comparison of the unit heating load for various floor sizes between the
present method and conventional approach shows a close agreement
with dynamic load calculation code. Some additional calculations are
performed to demonstrate it-s application examples.
Abstract: Although face recognition seems as an easy task for
human, automatic face recognition is a much more challenging task
due to variations in time, illumination and pose. In this paper, the
influence of time-lapse on visible and thermal images is examined.
Orthogonal moment invariants are used as a feature extractor to
analyze the effect of time-lapse on thermal and visible images and the
results are compared with conventional Principal Component
Analysis (PCA). A new triangle square ratio criterion is employed
instead of Euclidean distance to enhance the performance of nearest
neighbor classifier. The results of this study indicate that the ideal
feature vectors can be represented with high discrimination power
due to the global characteristic of orthogonal moment invariants.
Moreover, the effect of time-lapse has been decreasing and enhancing
the accuracy of face recognition considerably in comparison with
PCA. Furthermore, our experimental results based on moment
invariant and triangle square ratio criterion show that the proposed
approach achieves on average 13.6% higher in recognition rate than
PCA.
Abstract: As in today's semiconductor industries test costs can make up to 50 percent of the total production costs, an efficient test error detection becomes more and more important. In this paper, we present a new machine learning approach to test error detection that should provide a faster recognition of test system faults as well as an improved test error recall. The key idea is to learn a classifier ensemble, detecting typical test error patterns in wafer test results immediately after finishing these tests. Since test error detection has not yet been discussed in the machine learning community, we define central problem-relevant terms and provide an analysis of important domain properties. Finally, we present comparative studies reflecting the failure detection performance of three individual classifiers and three ensemble methods based upon them. As base classifiers we chose a decision tree learner, a support vector machine and a Bayesian network, while the compared ensemble methods were simple and weighted majority vote as well as stacking. For the evaluation, we used cross validation and a specially designed practical simulation. By implementing our approach in a semiconductor test department for the observation of two products, we proofed its practical applicability.
Abstract: The impact of noise upon live quality has become an
important aspect to make both urban and environmental policythroughout
Europe and in Turkey. Concern over the quality of urban
environments, including noise levels and declining quality of green
space, is over the past decade with increasing emphasis on designing
livable and sustainable communities. According to the World Health
Organization, noise pollution is the third most hazardous
environmental type of pollution which proceeded by only air (gas
emission) and water pollution. The research carried out in two
phases, the first stage of the research noise and plant types providing
the suction of noise was evaluated through literature study and at the
second stage, definite types (Juniperus horizontalis L., Spirea
vanhouetti Briot., Cotoneaster dammerii C.K., Berberis thunbergii
D.C., Pyracantha coccinea M. etc.) were selected for the city of
Konya. Trials were conducted on the highway of Konya. The biggest
value of noise reduction was 6.3 dB(A), 4.9 dB(A), 6.2 dB(A) value
with compared to the control which includes the group that formed
by the bushes at the distance of 7m, 11m, 20m from the source and
5m, 9m, 20m of plant width, respectively. In this paper, definitions
regarding to noise and its sources were made and the precautions
were taken against to noise that mentioned earlier with the adverse
effects of noise. Plantation design approaches and suggestions
concerning to the diversity to be used, which are peculiar to roadside,
were developed to discuss the role and the function of plant material
to reduce the noise of the traffic.
Abstract: With increasing complexity in electronic systems
there is a need for system level anomaly detection and fault isolation.
Anomaly detection based on vector similarity to a training set is used
in this paper through two approaches, one the preserves the original
information, Mahalanobis Distance (MD), and the other that
compresses the data into its principal components, Projection Pursuit
Analysis. These methods have been used to detect deviations in
system performance from normal operation and for critical parameter
isolation in multivariate environments. The study evaluates the
detection capability of each approach on a set of test data with known
faults against a baseline set of data representative of such “healthy"
systems.
Abstract: The two-phase flow field and the motion of the free
surface in an oscillating channel are simulated numerically to assess
the methodology for simulating nuclear reacotr thermal hydraulics
under seismic conditions. Two numerical methods are compared: one
is to model the oscillating channel directly using the moving grid of
the Arbitrary Lagrangian-Eulerian method, and the other is to simulate
the effect of channel motion using the oscillating acceleration acting
on the fluid in the stationary channel. The two-phase flow field in the
oscillating channel is simulated using the level set method in both
cases. The calculated results using the oscillating acceleration are
found to coinside with those using the moving grid, and the theoretical
back ground and the limitation of oscillating acceleration are discussed.
It is shown that the change in the interfacial area between liquid and
gas phases under seismic conditions is important for nuclear reactor
thermal hydraulics.
Abstract: In this paper we use exponential particle swarm
optimization (EPSO) to cluster data. Then we compare between
(EPSO) clustering algorithm which depends on exponential variation
for the inertia weight and particle swarm optimization (PSO)
clustering algorithm which depends on linear inertia weight. This
comparison is evaluated on five data sets. The experimental results
show that EPSO clustering algorithm increases the possibility to find
the optimal positions as it decrease the number of failure. Also show
that (EPSO) clustering algorithm has a smaller quantization error
than (PSO) clustering algorithm, i.e. (EPSO) clustering algorithm
more accurate than (PSO) clustering algorithm.
Abstract: True integration of multimedia services over wired or
wireless networks increase the productivity and effectiveness in
today-s networks. IP Multimedia Subsystems are Next Generation
Network architecture to provide the multimedia services over fixed
or mobile networks. This paper proposes an extended SIP-based QoS
Management architecture for IMS services over underlying IP access
networks. To guarantee the end-to-end QoS for IMS services in
interconnection backbone, SIP based proxy Modules are introduced
to support the QoS provisioning and to reduce the handoff disruption
time over IP access networks. In our approach these SIP Modules
implement the combination of Diffserv and MPLS QoS mechanisms
to assure the guaranteed QoS for real-time multimedia services. To
guarantee QoS over access networks, SIP Modules make QoS
resource reservations in advance to provide best QoS to IMS users
over heterogeneous networks. To obtain more reliable multimedia
services, our approach allows the use of SCTP protocol over SIP
instead of UDP due to its multi-streaming feature. This architecture
enables QoS provisioning for IMS roaming users to differentiate IMS
network from other common IP networks for transmission of realtime
multimedia services. To validate our approach simulation
models are developed on short scale basis. The results show that our
approach yields comparable performance for efficient delivery of
IMS services over heterogeneous IP access networks.
Abstract: This study presents a mathematical modeling approach to the planning of HIV therapies on an individual basis. The model replicates clinical data from typical-progressors to AIDS for all stages of the disease with good agreement. Clinical data from rapid-progressors and long-term non-progressors is also matched by estimation of immune system parameters only. The ability of the model to reproduce these phenomena validates the formulation, a fact which is exploited in the investigation of effective therapies. The therapy investigation suggests that, unlike continuous therapy, structured treatment interruptions (STIs) are able to control the increase in both the drug-sensitive and drug-resistant virus population and, hence, prevent the ultimate progression from HIV to AIDS. The optimization results further suggest that even patients characterised by the same progression type can respond very differently to the same treatment and that the latter should be designed on a case-by-case basis. Such a methodology is presented here.
Abstract: Tensile armour wires provide a flexible pipe's
resistance to longitudinal stresses. Flexible pipe manufacturers need
to know the effect of defects such as scratches and cracks, with
dimensions less than 0.2mm which is the limit of the current nondestructive
detection technology, on the fracture stress and fracture
strain of the wire for quality assurance purposes. Recent research
involving the determination of the fracture strength of cracked wires
employed laboratory testing and classical fracture mechanics
approach using non-standardised fracture mechanics specimens
because standard test specimens could not be manufactured from the
wires owing to their sizes. In this work, the effect of miniature
cracks on the fracture properties of tensile armour wires was
investigated using laboratory and finite element tensile testing
simulations with the phenomenological shear fracture model. The
investigation revealed that the presence of cracks shallower than
0.2mm is worse on the fracture strain of the wire.
Abstract: Information and Communication Technologies (ICT) in mathematical education is a very active field of research and innovation, where learning is understood to be meaningful and grasping multiple linked representation rather than rote memorization, a great amount of literature offering a wide range of theories, learning approaches, methodologies and interpretations, are generally stressing the potentialities for teaching and learning using ICT. Despite the utilization of new learning approaches with ICT, students experience difficulties in learning concepts relevant to understanding mathematics, much remains unclear about the relationship between the computer environment, the activities it might support, and the knowledge that might emerge from such activities. Many questions that might arise in this regard: to what extent does the use of ICT help students in the process of understanding and solving tasks or problems? Is it possible to identify what aspects or features of students' mathematical learning can be enhanced by the use of technology? This paper will highlight the interest of the integration of information and communication technologies (ICT) into the teaching and learning of mathematics (quadratic functions), it aims to investigate the effect of four instructional methods on students- mathematical understanding and problem solving. Quantitative and qualitative methods are used to report about 43 students in middle school. Results showed that mathematical thinking and problem solving evolves as students engage with ICT activities and learn cooperatively.
Abstract: Recently, a model multi-agent e-commerce system based on mobile buyer agents and transfer of strategy modules was proposed. In this paper a different approach to code mobility is introduced, where agent mobility is replaced by local agent creation supplemented by similar code mobility as in the original proposal. UML diagrams of agents involved in the new approach to mobility and the augmented system activity diagram are presented and discussed.
Abstract: This study examines perception of environmental
approach in small and medium-sized enterprises (SMEs) – the
process by which firms integrate environmental concern into
business. Based on a review of the literature, the paper synthesizes
focus on environmental issues with the reflection in a case study in
the Czech Republic. Two themes of corporate environmentalism are
discussed – corporate environmental orientation and corporate
stances toward environmental concerns. It provides theoretical
material on greening organizational culture that is helpful in
understanding the response of contemporary business to
environmental problems. We integrate theoretical predictions with
empirical findings confronted with reality. Scales to measure these
themes are tested in a survey of managers in 229 Czech firms. We
used the process of in-depth questioning. The research question was
derived and answered in the context of the corresponding literature
and conducted research. A case study showed us that environmental
approach is variety different (depending on the size of the firm) in
SMEs sector. The results of the empirical mapping demonstrate
Czech company’s approach to environment and define the problem
areas and pinpoint the main limitation in the expansion of
environmental aspects. We contribute to the debate for recognition of
the particular role of environmental issues in business reality.
Abstract: Although backpropagation ANNs generally predict
better than decision trees do for pattern classification problems, they
are often regarded as black boxes, i.e., their predictions cannot be
explained as those of decision trees. In many applications, it is
desirable to extract knowledge from trained ANNs for the users to
gain a better understanding of how the networks solve the problems.
A new rule extraction algorithm, called rule extraction from artificial
neural networks (REANN) is proposed and implemented to extract
symbolic rules from ANNs. A standard three-layer feedforward ANN
is the basis of the algorithm. A four-phase training algorithm is
proposed for backpropagation learning. Explicitness of the extracted
rules is supported by comparing them to the symbolic rules generated
by other methods. Extracted rules are comparable with other methods
in terms of number of rules, average number of conditions for a rule,
and predictive accuracy. Extensive experimental studies on several
benchmarks classification problems, such as breast cancer, iris,
diabetes, and season classification problems, demonstrate the
effectiveness of the proposed approach with good generalization
ability.
Abstract: The feature extraction method(s) used to recognize
hand-printed characters play an important role in ICR applications.
In order to achieve high recognition rate for a recognition system, the
choice of a feature that suits for the given script is certainly an
important task. Even if a new feature required to be designed for a
given script, it is essential to know the recognition ability of the
existing features for that script. Devanagari script is being used in
various Indian languages besides Hindi the mother tongue of majority
of Indians. This research examines a variety of feature extraction
approaches, which have been used in various ICR/OCR applications,
in context to Devanagari hand-printed script. The study is conducted
theoretically and experimentally on more that 10 feature extraction
methods. The various feature extraction methods have been evaluated
on Devanagari hand-printed database comprising more than 25000
characters belonging to 43 alphabets. The recognition ability of the
features have been evaluated using three classifiers i.e. k-NN, MLP
and SVM.