Abstract: The paper tackles the topic of determining the cost of
innovation in software development projects. Innovation can be
achieved either in a planned or unplanned manner. The paper
approaches the scenarios were innovation is planned for. As a starting
point an innovative software development project is analyzed. The
project is depicted step by step as it was implemented, from inception
to delivery. Costs that are proprietary to innovation in software
development are isolated based on the author’s personal experience
in managing the above mentioned project. Innovation costs
components identified by the author are then validated using open
discussions with software development professionals and projects
managers on LinkedIn groups. In order to receive relevant feedback
only groups that focus on software development and innovation
management are targeted. Additional innovation cost components
suggested by software development professionals and projects
managers are also considered. Based on the identified cost
components an indicator is built. The indicator is meant to formalize
the process of determining the cost of innovation in a software
development project. The indicator aggregates all the innovation cost
components that are identified in the research process. The process of
calculating each cost component is also described. Conclusions are
formulated and new related research topics are submitted for debate.
Abstract: The key role in phenomenological modelling of cyclic
plasticity is good understanding of stress-strain behaviour of given
material. There are many models describing behaviour of materials
using numerous parameters and constants. Combination of individual
parameters in those material models significantly determines whether
observed and predicted results are in compliance. Parameter
identification techniques such as random gradient, genetic algorithm
and sensitivity analysis are used for identification of parameters using
numerical modelling and simulation. In this paper genetic algorithm
and sensitivity analysis are used to study effect of 4 parameters of
modified AbdelKarim-Ohno cyclic plasticity model. Results
predicted by Finite Element (FE) simulation are compared with
experimental data from biaxial ratcheting test with semi-elliptical
loading path.
Abstract: The value co-creation has gained much attention in
sales research, but less is known about how salespeople and
customers interact in the authentic business to business (B2B) sales
meetings. The study presented in this paper empirically contributes to
existing research by presenting authentic B2B sales meetings that
were video recorded and analyzed using observation and qualitative
content analysis methods. This paper aims to study key elements of
successful sales interactions between salespeople and customers/
buyers. This study points out that salespeople are selling value rather
than the products or services themselves, which are only enablers in
realizing business benefits. Therefore, our findings suggest that
promoting and easing open discourse is an essential part of a
successful sales encounter. A better understanding of how
salespeople and customers successfully interact would help
salespeople to develop their interpersonal sales skills.
Abstract: The effects of hypertension are often lethal thus its
early detection and prevention is very important for everybody. In
this paper, a neural network (NN) model was developed and trained
based on a dataset of hypertension causative parameters in order to
forecast the likelihood of occurrence of hypertension in patients. Our
research goal was to analyze the potential of the presented NN to
predict, for a period of time, the risk of hypertension or the risk of
developing this disease for patients that are or not currently
hypertensive. The results of the analysis for a given patient can
support doctors in taking pro-active measures for averting the
occurrence of hypertension such as recommendations regarding the
patient behavior in order to lower his hypertension risk. Moreover,
the paper envisages a set of three example scenarios in order to
determine the age when the patient becomes hypertensive, i.e.
determine the threshold for hypertensive age, to analyze what
happens if the threshold hypertensive age is set to a certain age and
the weight of the patient if being varied, and, to set the ideal weight
for the patient and analyze what happens with the threshold of
hypertensive age.
Abstract: There is a trend in development discourse to
understand and explain the level of corruption in Nigeria, its anticorruption
crusade and why it is failing, as well as its level of
compliance with International standards of United Nations
Convention against Corruption (UNCAC) & African Union
Convention on Converting and Preventing Corruption) to which
Nigeria is a signatory. This paper discusses the legal and
Constitutional provisions relating to corrupt practices and safeguards
in Nigeria, as well as the obstacles to the implementation of these
Conventions.
The paper highlights the challenges posed to the Anti-Corruption
crusade by analysing the loopholes that exist both in administrative
structure and in scope of the relevant laws. The paper argues that
Nigerian Constitution did not make adequate provisions for the
implementation of the conventions, hence a proposal which will
ensure adequate provision for implementing the conventions to better
the lives of Nigerians. The paper concludes that there is the need to
build institutional parameters, adequate constitutional and structural
safeguards, as well as to synergise strategies, collaborations and
alliances to facilitate the timely domestication and implementation of
the conventions.
Abstract: Interaction of Schiff base complexes of Iron and
Manganese: Iron [N, N’ Bis (5- (triphenyl phosphonium methyl)
salicylidene) -1, 2 ethanediamine) chloride, [Fe Salen]Cl; Manganese
[N, N’ Bis (5- (triphenyl phosphonium methyl) salicylidene) -1, 2
ethanediamine) acetate, were investigated by spectroscopic and
isothermal titration calorimetry techniques (ITC).
The absorbance spectra of complexes have shown hyper and
hypochromism in the presence of DNA that is indication of
interaction of complexes with DNA. The linear dichroism (LD)
measurements confirmed the bending of DNA in the presence of
complexes.
Furthermore, Isothermal titration calorimetry experiments
approved that complexes bound to DNA on the base of both
electrostatic and hydrophobic interactions. More, ITC profile exhibits
the existence of two binding phases for the complexes. Antibacterial
activity of ligand and complexes were tested in vitro to evaluate their
activity against the gram positive and negative bacteria.
Abstract: Two finite element (FEM) models are presented in
this paper to address the random nature of the response of glued
timber structures made of wood segments with variable elastic
moduli evaluated from 3600 indentation measurements. This total
database served to create the same number of ensembles as was the
number of segments in the tested beam. Statistics of these ensembles
were then assigned to given segments of beams and the Latin
Hypercube Sampling (LHS) method was called to perform 100
simulations resulting into the ensemble of 100 deflections subjected
to statistical evaluation. Here, a detailed geometrical arrangement of
individual segments in the laminated beam was considered in the
construction of two-dimensional FEM model subjected to in fourpoint
bending to comply with the laboratory tests. Since laboratory
measurements of local elastic moduli may in general suffer from a
significant experimental error, it appears advantageous to exploit the
full scale measurements of timber beams, i.e. deflections, to improve
their prior distributions with the help of the Bayesian statistical
method. This, however, requires an efficient computational model
when simulating the laboratory tests numerically. To this end, a
simplified model based on Mindlin’s beam theory was established.
The improved posterior distributions show that the most significant
change of the Young’s modulus distribution takes place in laminae in
the most strained zones, i.e. in the top and bottom layers within the
beam center region. Posterior distributions of moduli of elasticity
were subsequently utilized in the 2D FEM model and compared with
the original simulations.
Abstract: An experimental study was performed to investigate
the behavior and strength of proposed technique to connect
reinforced concrete (RC) beam to steel or composite columns. This
approach can practically be used in several types of building
construction. In this technique, the main beam of the frame consists
of a transfer part (part of beam; Tr.P) and a common reinforcement
concrete beam. The transfer part of the beam is connected to the
column, whereas the rest of the beam is connected to the transfer part
from each side. Four full-scale beam-column connections were tested
under static loading. The test parameters were the length of the
transfer part and the column properties. The test results show that
using of the transfer part technique leads to modify the deformation
capabilities for the RC beam and hence it increases its resistance
against failure. Increase in length of the transfer part did not
necessarily indicate an enhanced behavior. The test results contribute
to the characterization of the connection behavior between RC beam -
steel column and can be used to calibrate numerical models for the
simulation of this type of connection.
Abstract: This paper introduces a proposal scheme for an
Intelligent System applied to Pedagogical Advising using Case-Based
Reasoning, to find consolidated solutions before used for the new
problems, making easier the task of advising students to the
pedagogical staff. We do intend, through this work, introduce the
motivation behind the choices for this system structure, justifying the
development of an incremental and smart web system who learns
bests solutions for new cases when it’s used, showing technics and
technology.
Abstract: In this study, the Compressive strength of concretes
made with Ground Granulated Blast furnace Slag (GGBS),
Pulverised Fuel Ash (PFA), Rice Husk Ash (RHA) and Waste Glass
Powder (WGP) after they were exposed 7800C (exposure duration of
around 60 minutes) and then allowed to cool down gradually in the
furnace for about 280 minutes at water binder ratio of 0.50 was
investigated. GGBS, PFA, RHA and WGP were used to replace up to
20% Portland cement in the control concrete. Test for the
determination of workability, compressive strength and tensile
splitting strength of the concretes were carried out and the results
were compared with control concrete. The test results showed that the
compressive strength decreased by an average of around 30% after
the concretes were exposed to the heating and cooling scenario.
Abstract: Ionic liquids consisting of a phosphonium cationic
moiety and a saccharinate anion are synthesized and compared with
their precursors, phosphonium chlorides, in reference to their
extraction efficiency towards L-lactic acid. On the base of
measurements of the acid and the water partitioning in the
equilibrium biphasic systems, the molar ratios between acid, water
and ionic liquid are estimated which allows to deduce the lactic acid
extractive pathway. The effect of a salting-out addition that
strengthens hydrophobicity in both phases is studied in view to reveal
the best biphasic system with respect to IL low toxicity and high
extraction efficiency.
Abstract: Catalytic combustion of methane is imperative due to
stability of methane at low temperature. Methane (CH4), therefore,
remains unconverted in vehicle exhausts thereby causing greenhouse
gas GHG emission problem. In this study, heterogeneous catalysts of
palladium with bio-char (2 wt% Pd/Bc) and Al2O3 (2wt% Pd/ Al2O3)
supports were prepared by incipient wetness impregnation and then
subsequently tested for catalytic combustion of CH4. Support-porous
heterogeneous catalytic combustion (HCC) material were selected
based on factors such as surface area, porosity, thermal stability,
thermal conductivity, reactivity with reactants or products, chemical
stability, catalytic activity, and catalyst life. Sustainable and
renewable support-material of bio-mass char derived from palm shell
waste material was compared with those from the conventional
support-porous materials. Kinetic rate of reaction was determined for
combustion of methane on Palladium (Pd) based catalyst with Al2O3
support and bio-char (Bc). Material characterization was done using
TGA, SEM, and BET surface area. The performance test was
accomplished using tubular quartz reactor with gas mixture ratio of
3% methane and 97% air. The methane porous-HCC conversion was
carried out using online gas analyzer connected to the reactor that
performed porous-HCC. BET surface area for prepared 2 wt% Pd/Bc
is smaller than prepared 2wt% Pd/ Al2O3 due to its low porosity
between particles. The order of catalyst activity based on kinetic rate
on reaction of catalysts in low temperature was 2wt%
Pd/Bc>calcined 2wt% Pd/ Al2O3> 2wt% Pd/ Al2O3>calcined 2wt%
Pd/Bc. Hence agro waste material can successfully be utilized as an
inexpensive catalyst support material for enhanced CH4 catalytic
combustion.
Abstract: Adolescents with Autism Spectrum Disorders (ASD)
often experience social-communication difficulties that negatively
impact their social interactions with typical peers. However, unlike
other age and disability groups, there is little intervention research to
inform best practice for these students. One evidence-based strategy
for younger students with ASD is peer-mediated intervention (PMI).
PMI may be particularly promising for use with adolescents, as peers
are readily available and are natural experts for encouraging authentic
high school conversations. This paper provides a review of previous
research that evaluated the use of PMI to improve the socialcommunication
skills of students with ASD. Specific intervention
features associated with positive student outcomes are identified and
recommendations for future research are provided. Adolescents with
ASD are targeted due the critical importance of social conversation at
the high school level.
Abstract: This study aimed to examine the management and
development of forest tourism Kamchanoad. Ban Dung, Udon Thani
sustainability. Data were collected by means of qualitative research
including in-depth interviews, semi- structured, and then the data
were summarized and discussed in accordance with the objectives.
And make a presentation in the form of lectures. The target
population for the study consisted of 16 people, including
representatives from government agencies, community leaders and
the community. The results showed that Guidelines for the
Management and Development of Forest Tourism Kamchanoad
include management of buildings and infrastructure such as roads,
water, electricity, toilets. Other developments are the establishment
of a service center that provides information and resources to
facilitate tourists.; nature trails and informative signage to educate
visitors on the path to the jungle Kamchanoad; forest activities for
tourists who are interested only in occasional educational activities
such as vegetation, etc.; disseminating information on various aspects
of tourism through various channels in both Thailand and English, as
well as a web site to encourage community involvement in the
planning and management of tourism together with the care and
preservation of natural resources and preserving the local cultural
tourist area of Kamchanoad.
Abstract: To determine the potential of a low cost Irish
engineered timber product to replace high cost solid timber for use in
bending active structures such as gridshells a single Irish engineered
timber product in the form of orientated strand board (OSB) was
selected. A comparative study of OSB and solid timber was carried
out to determine the optimum properties that make a material suitable
for use in gridshells. Three parameters were identified to be relevant
in the selection of a material for gridshells. These three parameters
are the strength to stiffness ratio, the flexural stiffness of
commercially available sections, and the variability of material and
section properties. It is shown that when comparing OSB against
solid timber, OSB is a more suitable material for use in gridshells that
are at the smaller end of the scale and that have tight radii of
curvature. Typically, for solid timber materials, stiffness is used as an
indicator for strength and engineered timber is no different. Thus, low
flexural stiffness would mean low flexural strength. However, when
it comes to bending active gridshells, OSB offers a significant
advantage. By the addition of multiple layers, an increased section
size is created, thus endowing the structure with higher stiffness and
higher strength from initial low stiffness and low strength materials
while still maintaining tight radii of curvature. This allows OSB to
compete with solid timber on large scale gridshells. Additionally, a
preliminary sustainability study using a set of sustainability indicators
was carried out to determine the relative sustainability of building a
large-scale gridshell in Ireland with a primary focus on economic
viability but a mention is also given to social and environmental
aspects. For this, the Savill garden gridshell in the UK was used as
the functional unit with the sustainability of the structural roof
skeleton constructed from UK larch solid timber being compared
with the same structure using Irish OSB. Albeit that the advantages of
using commercially available OSB in a bending active gridshell are
marginal and limited to specific gridshell applications, further study
into an optimised engineered timber product is merited.
Abstract: This paper proposes five level diode clamped Z source
Inverter. The existing PWM techniques used for ZSI are restricted for
two level. The two level Z Source Inverter have high harmonic
distortions which effects the performance of the grid connected PV
system. To improve the performance of the system the number of
voltage levels in the output waveform need to be increased. This
paper presents comparative analysis of a five level diode clamped Z
source Inverter with different carrier based Modified Pulse Width
Modulation techniques. The parameters considered for comparison
are output voltage, voltage gain, voltage stress across switch and total
harmonic distortion when powered by same DC supply. Analytical
results are verified using MATLAB.
Abstract: In its efforts to utilize the information and
communication technology to enhance the quality of public service
delivery, national and local governments around the world are
competing to introduce more ICT applications as tools to automate
processes related to law enforcement or policy execution, increase
citizen orientation, trust, and satisfaction, and create one-stop-shops
for public services. In its implementation, e-Government ICTs need
to maintain transparency, participation, and collaboration. Due to this
diverse of mixed goals and requirements, e-Government systems
need to be designed based on special design considerations in order
to eliminate the risks of failure to compliance to government
regulations, citizen dissatisfaction, or market repulsion.
In this article we suggest a framework with guidelines for
designing government information systems that takes into
consideration the special requirements of the public sector. Then we
introduce two case studies and show how applying those guidelines
would result in a more solid system design.
Abstract: The purpose of the present work was to develop an
innovative food product with nutritional properties as well as
appealing organoleptic qualities. The product, a jam, was prepared
with the beans’ cooking water combined with fresh apple or carrot,
without the addition of any conservatives. Three different jams were
produced: bean and carrot, bean and apple and bean, apple and
cinnamon. The developed products underwent a sensorial analysis
that revealed that the bean, apple and cinnamon jam was globally
better accepted. However, with this study, the consumers determined
that the bean and carrot jam had the most attractive color and the
bean and apple jam the better consistency. Additionally, it was
possible to analyze the jams for their chemical components, namely
fat, fiber, protein, sugars and antioxidant activity. The obtained
results showed that the bean and carrot jam had the highest lipid
content, while the bean, apple and cinnamon jam had the highest
fiber content, when compared to the other two jams. Regarding the
sugar content, both jams with apple revealed similar sugar values,
which were higher than the sugar content of the bean and carrot jam.
The antioxidant activity was on average 10 mg TE/g.
Abstract: Power Regeneration in Refrigeration Plant concept
has been analyzed and has been shown to be capable of saving about
25% power in Cryogenic Plants with the Power Regeneration System
(PRS) running under nominal conditions. The innovative component
Compressor Expander Group (CEG) based on turbomachinery has
been designed and built modifying CETT compressor and expander,
both selected for optimum plant performance. Experiments have
shown the good response of the turbomachines to run with R404a as
working fluid. Power saving up to 12% under PRS derated conditions
(50% loading) has been demonstrated. Such experiments allowed
predicting a power saving up to 25% under CEG full load.
Abstract: We address the integer frequency offset (IFO)
estimation under the influence of the timing offset (TO) in orthogonal
frequency division multiplexing (OFDM) systems. Incorporating the
IFO and TO into the symbol set used to represent the received
OFDM symbol, we investigate the influence of the TO on the IFO,
and then, propose a combining method between two consecutive
OFDM correlations, reducing the influence. The proposed scheme
has almost the same complexity as that of the conventional
schemes, whereas it does not need the TO knowledge contrary to
the conventional schemes. From numerical results it is confirmed
that the proposed scheme is insensitive to the TO, consequently,
yielding an improvement of the IFO estimation performance over
the conventional schemes when the TO exists.