Abstract: The operation performance of a valveless micro-pump
is strongly dependent on the shape of connected nozzle/diffuser and
Reynolds number. The aims of present work are to compare the
performance curves of micropump with the original straight
nozzle/diffuser and contoured nozzle/diffuser under different back
pressure conditions. The tested valveless micropumps are assembled
of five pieces of patterned PMMA plates with hot-embracing
technique. The structures of central chamber, the inlet/outlet
reservoirs and the connected nozzle/diffuser are fabricated with laser
cutting machine. The micropump is actuated with circular-type PZT
film embraced on the bottom of central chamber. The deformation of
PZT membrane with various input voltages is measured with a
displacement laser probe. A simple testing facility is also constructed
to evaluate the performance curves for comparison.
In order to observe the evaluation of low Reynolds number
multiple vortex flow patterns within the micropump during suction
and pumping modes, the unsteady, incompressible laminar
three-dimensional Reynolds-averaged Navier-Stokes equations are
solved. The working fluid is DI water with constant thermo-physical
properties. The oscillating behavior of PZT film is modeled with the
moving boundary wall in way of UDF program. With the dynamic
mesh method, the instants pressure and velocity fields are obtained
and discussed.Results indicated that the volume flow rate is not
monotony increased with the oscillating frequency of PZT film,
regardless of the shapes of nozzle/diffuser. The present micropump
can generate the maximum volume flow rate of 13.53 ml/min when
the operation frequency is 64Hz and the input voltage is 140 volts.
The micropump with contoured nozzle/diffuser can provide 7ml/min
flow rate even when the back pressure is up to 400 mm-H2O. CFD
results revealed that the flow central chamber was occupied with
multiple pairs of counter-rotating vortices during suction and
pumping modes. The net volume flow rate over a complete
oscillating periodic of PZT
Abstract: PCCI engines can reduce NOx and PM emissions
simultaneously without sacrificing thermal efficiency, but a low
combustion temperature resulting from early fuel injection, and
ignition occurring prior to TDC, can cause higher THC and CO
emissions and fuel consumption. In conclusion, it was found that the
PCCI combustion achieved by the 2-stage injection strategy with
optimized calibration factors (e.g. EGR rate, injection pressure, swirl
ratio, intake pressure, injection timing) can reduce NOx and PM
emissions simultaneously. This research works are expected to
provide valuable information conducive to a development of an
innovative combustion engine that can fulfill upcoming stringent
emission standards.
Abstract: One of the main advantages of the LO paradigm is to
allow the availability of good quality, shareable learning material
through the Web. The effectiveness of the retrieval process requires a
formal description of the resources (metadata) that closely fits the
user-s search criteria; in spite of the huge international efforts in this
field, educational metadata schemata often fail to fulfil this
requirement. This work aims to improve the situation, by the
definition of a metadata model capturing specific didactic features of
shareable learning resources. It classifies LOs into “teacher-oriented"
and “student-oriented" categories, in order to describe the role a LO
is to play when it is integrated into the educational process. This
article describes the model and a first experimental validation process
that has been carried out in a controlled environment.
Abstract: The P-Bigram method is a string comparison methods
base on an internal two characters-based similarity measure. The edit
distance between two strings is the minimal number of elementary
editing operations required to transform one string into the other. The
elementary editing operations include deletion, insertion, substitution
two characters. In this paper, we address the P-Bigram method to
sole the similarity problem in DNA sequence. This method provided
an efficient algorithm that locates all minimum operation in a string.
We have been implemented algorithm and found that our program
calculated that smaller distance than one string. We develop PBigram
edit distance and show that edit distance or the similarity and
implementation using dynamic programming. The performance of
the proposed approach is evaluated using number edit and percentage
similarity measures.
Abstract: The flash memory has many advantages such as low power consumption, strong shock resistance, fast I/O and non-volatility. And it is increasingly used in the mobile storage device. The YAFFS, one of the NAND flash file system, is widely used in the embedded device. However, the existing YAFFS takes long time to mount the file system because it scans whole spare areas in all pages of NAND flash memory. In order to solve this problem, we propose a new content-based flash file system using a mounting time reduction technique. The proposed method only scans partial spare areas of some special pages by using content-based block management. The experimental results show that the proposed method reduces the average mounting time by 87.2% comparing with JFFS2 and 69.9% comparing with YAFFS.
Abstract: All around the world pulp and paper industries are the
biggest plant production with the environmental pollution as the
biggest challenge facing the pulp manufacturing operations. The
concern among these industries is to produce a high volume of papers
with the high quality standard and of low cost without affecting the
environment. This result obtained from this bleaching study show
that the activation of peroxide was an effective method of reducing
the total applied charge of chlorine dioxide which is harmful to our
environment and also show that softwood and hardwood Kraft pulps
responded linearly to the peroxide treatments. During the bleaching
process the production plant produce chlorines. Under the trial stages
chloride dioxide has been reduced by 3 kg/ton to reduce the
brightness from 65% ISO to 60% ISO of pulp and the dosing point
returned to the E stage charges by pre-treating Kraft pulps with
hydrogen peroxide. The pulp and paper industry has developed
elemental chlorine free (ECF) and totally chlorine free (TCF)
bleaching, in their quest for being environmental friendly, they have
been looking at ways to turn their ECF process into a TCF process
while still being competitive. This prompted the research to
investigate the capability of the hydrogen peroxide as catalyst to
reduce chloride dioxide.
Abstract: The previous study of new metal gasket that contact
width and contact stress an important design parameter for optimizing
metal gasket performance. The optimum design based on an elastic
and plastic contact stress was founded. However, the influence of
flange surface roughness had not been investigated thoroughly. The
flange has many kinds of surface roughness. In this study, we
conducted a gasket model include a flange surface roughness effect. A
finite element method was employed to develop simulation solution. A
uniform quadratic mesh used for meshing the gasket material and a
gradually quadrilateral mesh used for meshing the flange. The gasket
model was simulated by using two simulation stages which is forming
and tightening simulation. A simulation result shows that a smoother
of surface roughness has higher slope for force per unit length. This
mean a squeezed against between flange and gasket will be strong. The
slope of force per unit length for gasket 400-MPa mode was higher
than the gasket 0-MPa mode.
Abstract: There are three distinct stages in the evolution of
economic thought, namely:
1. in the first stage, the major concern was to accelerate
economic growth with increased availability of material
goods, especially in developing economies with very low
living standards, because poverty eradication meant faster
economic growth.
2. in the second stage, economists made distinction between
growth and development. Development was seen as going
beyond economic growth, and bringing certain changes in
the structure of the economy with more equitable
distribution of the benefits of growth, with the growth
coming automatic and sustained.
3. the third stage is now reached. Our concern is now with
“sustainable development", that is, development not only
for the present but also of the future.
Thus the focus changed from “sustained growth" to “sustained
development". Sustained development brings to the fore the long
term relationship between the ecology and economic development.
Since the creation of UNEP in 1972 it has worked for
development without destruction for environmentally sound and
sustained development. It was realised that the environment cannot
be viewed in a vaccum, it is not separate from development, nor is it
competing. It suggested for the integration of the environment with
development whereby ecological factors enter development planning,
socio-economic policies, cost-benefit analysis, trade, technology
transfer, waste management, educational and other specific areas.
Industrialisation has contributed to the growth of economy of
several countries. It has improved the standards of living of its people
and provided benefits to the society. It has also created in the process
great environmental problems like climate change, forest destruction
and denudation, soil erosion and desertification etc.
On the other hand, industry has provided jobs and improved the
prospects of wealth for the industrialists. The working class
communities had to simply put up with the high levels of pollution in
order to keep up their jobs and also to save their income.
There are many roots of the environmental problem. They may be
political, economic, cultural and technological conditions of the
modern society. The experts concede that industrial growth lies
somewhere close to the heart of the matter. Therefore, the objective
of this paper is not to document all roots of an environmental crisis
but rather to discuss the effects of industrial growth and
development.
We have come to the conclusion that although public intervention
is often unnecessary to ensure that perfectly competitive markets will
function in society-s best interests, such intervention is necessary
when firms or consumers pollute.
Abstract: The spatial variation in plant species associated with intercropping is intended to reduce resource competition between species and increase yield potential. A field experiment was carried out on corn (Zea mays L.) and soybean (Glycine max L.) intercropping in a replacement series experiment with weed contamination consist of: weed free, infestation of redroot pigweed, infestation of jimsonweed and simultaneous infestation of redroot pigweed and jimsonweed in Karaj, Iran during 2007 growing season. The experimental design was a randomized complete block in factorial experiment with replicated thrice. Significant (P≤0.05) differences were observed in yield in intercropping. Corn yield was higher in intercropping, but soybean yield was significantly reduced by corn when intercropped. However, total productivity and land use efficiency were high under the intercropping system even in contamination of either species of weeds. Aggressivity of corn relative to soybean revealed the greater competitive ability of corn than soybean. Land equivalent ratio (LER) more than 1 in all treatments attributed to intercropping advantages and was highest in 50: 50 (corn/soybean) in weed free. These findings suggest that intercropping corn and soybean increase total productivity per unit area and improve land use efficiency. Considering the experimental findings, corn-soybean intercropping (50:50) may be recommended for yield advantage, more efficient utilization of resources, and weed suppression as a biological control.
Abstract: Mathematical programming has been applied to various
problems. For many actual problems, the assumption that the parameters
involved are deterministic known data is often unjustified. In
such cases, these data contain uncertainty and are thus represented
as random variables, since they represent information about the
future. Decision-making under uncertainty involves potential risk.
Stochastic programming is a commonly used method for optimization
under uncertainty. A stochastic programming problem with recourse
is referred to as a two-stage stochastic problem. In this study, we
consider a stochastic programming problem with simple integer
recourse in which the value of the recourse variable is restricted to a
multiple of a nonnegative integer. The algorithm of a dynamic slope
scaling procedure for solving this problem is developed by using a
property of the expected recourse function. Numerical experiments
demonstrate that the proposed algorithm is quite efficient. The
stochastic programming model defined in this paper is quite useful
for a variety of design and operational problems.
Abstract: Many exist studies always use Markov decision
processes (MDPs) in modeling optimal route choice in
stochastic, time-varying networks. However, taking many
variable traffic data and transforming them into optimal route
decision is a computational challenge by employing MDPs in
real transportation networks. In this paper we model finite
horizon MDPs using directed hypergraphs. It is shown that the
problem of route choice in stochastic, time-varying networks
can be formulated as a minimum cost hyperpath problem, and
it also can be solved in linear time. We finally demonstrate the
significant computational advantages of the introduced
methods.
Abstract: This paper deals with the application of a well-known neural network technique, multilayer back-propagation (BP) neural network, in financial data mining. A modified neural network forecasting model is presented, and an intelligent mining system is developed. The system can forecast the buying and selling signs according to the prediction of future trends to stock market, and provide decision-making for stock investors. The simulation result of seven years to Shanghai Composite Index shows that the return achieved by this mining system is about three times as large as that achieved by the buy and hold strategy, so it is advantageous to apply neural networks to forecast financial time series, the different investors could benefit from it.
Abstract: In its attempt to offer new ways into autonomy for a
large population of disabled people, assistive technology has largely
been inspired by robotics engineering. Recent human-like robots
carry new hopes that it seems to us necessary to analyze by means of
a specific theory of anthropomorphism. We propose to distinguish a
functional anthropomorphism which is the one of actual wheelchairs
from a structural anthropomorphism based on a mimicking of human
physiological systems. If functional anthropomorphism offers the
main advantage of eliminating the physiological systems
interdependence issue, the highly link between the robot for disabled
people and their human-built environment would lead to privilege in
the future the anthropomorphic structural way. In this future
framework, we highlight a general interdependence principle : any
partial or local structural anthropomorphism generates new
anthropomorphic needs due to the physiological systems
interdependency, whose effects can be evaluated by means of
specific anthropomorphic criterions derived from a set theory-based
approach of physiological systems.
Abstract: The objective of this paper was to designing a
ventilation system to enhance the performance of roof solar collector
(RSC) for reducing heat accumulation inside the house. The RSC has
1.8 m2 surface area made of CPAC monier roof tiles on the upper part
and gypsum board on the lower part. The space between CPAC
monier and gypsum board was fixed at 14 cm.
Ventilation system of modified roof solar collector (modified
RSC) consists of 9 tubes of 0.15m diameter and installed in the
lower part of RSC. Experimental result showed that the temperature
of the room, and attic temperature. The average temperature
reduction of room of house used modified RSC is about 2oC. and the
percentage of room temperature reduction varied between 0 to 10%.
Therefore, modified RSC is an interesting option in the sense that it
promotes solar energy and conserve energy.
Abstract: Concept maps can be generated manually or
automatically. It is important to recognize differences of the two
types of concept maps. The automatically generated concept maps
are dynamic, interactive, and full of associations between the terms
on the maps and the underlying documents. Through a specific
concept mapping system, Visual Concept Explorer (VCE), this paper
discusses how automatically generated concept maps are different
from manually generated concept maps and how different
applications and learning opportunities might be created with the
automatically generated concept maps. The paper presents several
examples of learning strategies that take advantages of the
automatically generated concept maps for concept learning and
exploration.
Abstract: The trends of design and development of information systems have undergone a variety of ongoing phases and stages. These variations have been evolved due to brisk changes in user requirements and business needs. To meet these requirements and needs, a flexible and agile business solution was required to come up with the latest business trends and styles. Another obstacle in agility of information systems was typically different treatment of same diseases of two patients: business processes and information services. After the emergence of information technology, the business processes and information systems have become counterparts. But these two business halves have been treated under totally different standards. There is need to streamline the boundaries of these both pillars that are equally sharing information system's burdens and liabilities. In last decade, the object orientation has evolved into one of the major solutions for modern business needs and now, SOA is the solution to shift business on ranks of electronic platform. BPM is another modern business solution that assists to regularize optimization of business processes. This paper discusses how object orientation can be conformed to incorporate or embed SOA in BPM for improved information systems.
Abstract: Results of Chilean wine classification based on the
information provided by an electronic nose are reported in this paper.
The classification scheme consists of two parts; in the first stage,
Principal Component Analysis is used as feature extraction method to
reduce the dimensionality of the original information. Then, Radial
Basis Functions Neural Networks is used as pattern recognition
technique to perform the classification. The objective of this study is
to classify different Cabernet Sauvignon, Merlot and Carménère wine
samples from different years, valleys and vineyards of Chile.
Abstract: This paper considers the effect of heat generation
proportional l to (T - T∞ )p , where T is the local temperature and T∞
is the ambient temperature, in unsteady free convection flow near the
stagnation point region of a three-dimensional body. The fluid is
considered in an ambient fluid under the assumption of a step change
in the surface temperature of the body. The non-linear coupled partial
differential equations governing the free convection flow are solved
numerically using an implicit finite-difference method for different
values of the governing parameters entering these equations. The
results for the flow and heat characteristics when p ≤ 2 show that
the transition from the initial unsteady-state flow to the final steadystate
flow takes place smoothly. The behavior of the flow is seen
strongly depend on the exponent p.
Abstract: Researchers have been applying tional intelligence (AI/CI) methods to computer games. In this research field, further researchesare required to compare AI/CI
methods with respect to each game application. In th
our experimental result on the comparison of three evolutionary algorithms – evolution strategy, genetic algorithm, and their hybrid
applied to evolving controller agents for the CIG 2007 Simulated Car Racing competition. Our experimental result shows that, premature
convergence of solutions was observed in the case of ES, and GA outperformed ES in the last half of generations. Besides, a hybrid
which uses GA first and ES next evolved the best solution among the whole solutions being generated. This result shows the ability of GA in
globally searching promising areas in the early stage and the ability of ES in locally searching the focused area (fine-tuning solutions).
Abstract: This paper present the harmonic elimination of hybrid
multilevel inverters (HMI) which could be increase the number of
output voltage level. Total Harmonic Distortion (THD) is one of the
most important requirements concerning performance indices.
Because of many numbers output levels of HMI, it had numerous
unknown variables of eliminate undesired individual harmonic and
THD nonlinear equations set. Optimized harmonic stepped waveform
(OHSW) is solving switching angles conventional method, but most
complicated for solving as added level. The artificial intelligent
techniques are deliberation to solve this problem. This paper presents
the Particle Swarm Optimization (PSO) technique for solving
switching angles to get minimum THD and eliminate undesired
individual harmonics of 15-levels hybrid multilevel inverters.
Consequently it had many variables and could eliminate numerous
harmonics. Both advantages including high level of inverter and
Particle Swarm Optimization (PSO) are used as powerful tools for
harmonics elimination.