Abstract: In this paper a comprehensive review on various
factory layouts has been carried out for designing a lucrative process
layout for medium scale industries. Industry data base reveals that the
end product rejection rate is on the order of 10% amounting large
profit loss. In order to avoid these rejection rates and to increase the
quality product production an intermediate non-destructive testing
facility (INDTF) has been recommended for increasing the overall
profit. We observed through detailed case studies that while
introducing INDTF to medium scale industries the expensive
production process can be avoided to the defective products well
before its final shape. Additionally, the defective products identified
during the intermediate stage can be effectively utilized for other
applications or recycling; thereby the overall wastage of the raw
materials can be reduced and profit can be increased. We concluded
that the prudent design of a factory layout through critical path
method facilitating with INDTF will warrant profitable outcome.
Abstract: This paper investigates the joint effect of the
interconnected (n,k)-star network topology and Multi-Agent
automated control on restoration and reconfiguration of power
systems. With the increasing trend in development in Multi-Agent
control technologies applied to power system reconfiguration
in presence of faulty components or nodes. Fault tolerance is
becoming an important challenge in the design processes of the
distributed power system topology. Since the reconfiguration of a
power system is performed by agent communication, the (n,k)-star
interconnected network topology is studied and modeled in this
paper to optimize the process of power reconfiguration. In this paper,
we discuss the recently proposed (n,k)-star topology and examine its
properties and advantages as compared to the traditional multi-bus
power topologies. We design and simulate the topology model for
distributed power system test cases. A related lemma based on the
fault tolerance and conditional diagnosability properties is presented
and proved both theoretically and practically. The conclusion is
reached that (n,k)-star topology model has measurable advantages
compared to standard bus power systems while exhibiting fault
tolerance properties in power restoration, as well as showing
efficiency when applied to power system route discovery.
Abstract: This paper reports a structured literature review of the
application of Health Information Technology in developing
countries, defined as the World Bank categories Low-income
countries, Lower-middle-income, and Upper-middle-income
countries. The aim was to identify and classify the various
applications of health information technology to assess its current
state in developing countries and explore potential areas of research.
We offer specific analysis and application of HIT in Libya as one of
the developing countries. A structured literature review was
conducted using the following online databases: IEEE, Science
Direct, PubMed, and Google Scholar. Publication dates were set for
2000-2013. For the PubMed search, publications in English, French,
and Arabic were specified. Using a content analysis approach, 159
papers were analyzed and a total number of 26 factors were identified
that affect the adoption of health information technology. Of the 2681
retrieved articles, 159 met the inclusion criteria which were carefully
analyzed and classified. The implementation of health information
technology across developing countries is varied. Whilst it was
initially expected financial constraints would have severely limited
health information technology implementation, some developing
countries like India have nevertheless dominated the literature and
taken the lead in conducting scientific research. Comparing the
number of studies to the number of countries in each category, we
found that Low-income countries and Lower-middle-income had
more studies carried out than Upper-middle-income countries.
However, whilst IT has been used in various sectors of the economy,
the healthcare sector in developing countries is still failing to benefit
fully from the potential advantages that IT can offer.
Abstract: The investigation on wind turbine degradation was
carried out using the nacelle wind data. The three Vestas V80-2MW
wind turbines of Sungsan wind farm in Jeju Island, South Korea were
selected for this work. The SCADA data of the wind farm for five
years were analyzed to draw power curve of the turbines. It is assumed
that the wind distribution is the Rayleigh distribution to calculate the
normalized capacity factor based on the drawn power curve of the
three wind turbines for each year. The result showed that the reduction
of power output from the three wind turbines occurred every year and
the normalized capacity factor decreased to 0.12%/year on average.
Abstract: Ontologies offer a means for representing and sharing
information in many domains, particularly in complex domains. For
example, it can be used for representing and sharing information
of System Requirement Specification (SRS) of complex systems
like the SRS of ERTMS/ETCS written in natural language. Since
this system is a real-time and critical system, generic ontologies,
such as OWL and generic ERTMS ontologies provide minimal
support for modeling temporal information omnipresent in these SRS
documents. To support the modeling of temporal information, one
of the challenges is to enable representation of dynamic features
evolving in time within a generic ontology with a minimal redesign
of it. The separation of temporal information from other information
can help to predict system runtime operation and to properly design
and implement them. In addition, it is helpful to provide a reasoning
and querying techniques to reason and query temporal information
represented in the ontology in order to detect potential temporal
inconsistencies. To address this challenge, we propose a lightweight
3-layer temporal Quality of Service (QoS) ontology for representing,
reasoning and querying over temporal and non-temporal information
in a complex domain ontology. Representing QoS entities in separated
layers can clarify the distinction between the non QoS entities
and the QoS entities in an ontology. The upper generic layer of
the proposed ontology provides an intuitive knowledge of domain
components, specially ERTMS/ETCS components. The separation of
the intermediate QoS layer from the lower QoS layer allows us to
focus on specific QoS Characteristics, such as temporal or integrity
characteristics. In this paper, we focus on temporal information that
can be used to predict system runtime operation. To evaluate our
approach, an example of the proposed domain ontology for handover
operation, as well as a reasoning rule over temporal relations in this
domain-specific ontology, are presented.
Abstract: Social media continues to grow, and user interfaces
may become more appealing if cultural characteristics are
incorporated into their design.
Facebook was designed in the west, and the original language was
English. Subsequently, the words in the user interface were translated
to other languages, including Arabic.
Arabic words are written from right to left, and English is written
from left to right. The translated version may misrepresent the
original design and users’ preferences may be influenced by their
culture, which should be considered in the user interface design.
Previous research indicates that users are more comfortable when
interacting with a user interface, which relates to their own culture.
Therefore, this paper, using a survey, investigates the preferences of
Saudi Arabians on the Arabic version of the user interface of
Facebook.
Abstract: In EFL programs, rating scales used in writing
assessment are often constructed by intuition. Intuition-based scales
tend to provide inaccurate and divisive ratings of learners’ writing
performance. Hence, following an empirical approach, this study
attempted to develop a rating scale for elementary-level writing at an
EFL program in Saudi Arabia. Towards this goal, 98 students’ essays
were scored and then coded using comprehensive taxonomy of
writing constructs and their measures. An automatic linear modeling
was run to find out which measures would best predict essay scores.
A nonparametric ANOVA, the Kruskal-Wallis test, was then used to
determine which measures could best differentiate among scoring
levels. Findings indicated that there were certain measures that could
serve as either good predictors of essay scores or differentiators
among scoring levels, or both. The main conclusion was that a rating
scale can be empirically developed using predictive and
discriminative statistical tests.
Abstract: Children are more susceptible to medication errors
than adults. Medication administration process is the last stage in the
medication treatment process and most of the errors detected in this
stage. Little research has been undertaken about medication errors in
children in the Middle East countries. This study was aimed to
evaluate how the paediatric nurses adhere to the medication
administration policy and also to identify any medication preparation
and administration errors or any risk factors. An observational,
prospective study of medication administration process from when
the nurses preparing patient medication until administration stage
(May to August 2014) was conducted in Saudi Arabia. Twelve
paediatric nurses serving 90 paediatric patients were observed. 456
drug administered doses were evaluated. Adherence rate was variable
in 7 steps out of 16 steps. Patient allergy information, dose
calculation, drug expiry date were the steps in medication
administration with lowest adherence rates. 63 medication
preparation and administration errors were identified with error rate
13.8% of medication administrations. No potentially life-threating
errors were witnessed. Few logistic and administrative factors were
reported. The results showed that the medication administration
policy and procedure need an urgent revision to be more sensible for
nurses in practice. Nurses’ knowledge and skills regarding to the
medication administration process should be improved.
Abstract: Recommendation systems are widely used in
e-commerce applications. The engine of a current recommendation
system recommends items to a particular user based on user
preferences and previous high ratings. Various recommendation
schemes such as collaborative filtering and content-based approaches
are used to build a recommendation system. Most of current
recommendation systems were developed to fit a certain domain such
as books, articles, and movies. We propose1 a hybrid framework
recommendation system to be applied on two dimensional spaces
(User × Item) with a large number of Users and a small number
of Items. Moreover, our proposed framework makes use of both
favorite and non-favorite items of a particular user. The proposed
framework is built upon the integration of association rules mining
and the content-based approach. The results of experiments show
that our proposed framework can provide accurate recommendations
to users.
Abstract: Due to the importance of ports to trade and economic
development of the regions in which they are inserted, in recent
decades the number of studies devoted to this subject has increased.
Part of these studies considers the ports as business agglomerations
and focuses on port governance. This is an important approach since
the port performance is the result of activities performed by actors
belonging to the port-logistics chain, which need to be properly
coordinated. This coordination takes place through a port governance
model. Given this context, this study aims to analyze the governance
model of the port of Santos from the perspective of port customers.
To do this, a closed-ended questionnaire based on a conceptual model
that considers the key dimensions associated with port governance
was applied to the international freight forwarders that operate in the
port. The results show the applicability of the considered model and
highlight improvement opportunities to be implemented at the port of
Santos.
Abstract: Monocopter is a single-wing rotary flying vehicle
which has the capability of hovering. This flying vehicle includes two
dynamic parts in which more efficiency can be expected rather than
other Micro UAVs due to the extended area of wing compared to its
fuselage. Low cost and simple mechanism in comparison to other
vehicles such as helicopter are the most important specifications of
this flying vehicle.
In the previous paper we discussed the introduction of the final
system but in this paper, the experimental design process of
Monocopter and its control algorithm has been investigated in
general. Also the editorial bugs in the previous article have been
corrected and some translational ambiguities have been resolved.
Initially by constructing several prototypes and carrying out many
flight tests the main design parameters of this air vehicle were
obtained by experimental measurements. Eventually the required
main monocopter for this project was constructed. After construction
of the monocopter in order to design, implementation and testing of
control algorithms first a simple optic system used for determining
the heading angle. After doing numerous tests on Test Stand, the
control algorithm designed and timing of applying control inputs
adjusted. Then other control parameters of system were tuned in
flight tests. Eventually the final control system designed and
implemented using the AHRS sensor and the final operational tests
performed successfully.
Abstract: Urban public spaces are sutured with a range of
surveillance and sensor technologies that claim to enable new forms
of ‘data based citizen participation’, but also increase the tendency
for ‘function-creep’, whereby vast amounts of data are gathered,
stored and analysed in a broad application of urban surveillance. This
kind of monitoring and capacity for surveillance connects with
attempts by civic authorities to regulate, restrict, rebrand and reframe
urban public spaces. A direct consequence of the increasingly
security driven, policed, privatised and surveilled nature of public
space is the exclusion or ‘unfavourable inclusion’ of those considered
flawed and unwelcome in the ‘spectacular’ consumption spaces of
many major urban centres. In the name of urban regeneration,
programs of securitisation, ‘gentrification’ and ‘creative’ and ‘smart’
city initiatives refashion public space as sites of selective inclusion
and exclusion. In this context of monitoring and control procedures,
in particular, children and young people’s use of space in parks,
neighbourhoods, shopping malls and streets is often viewed as a
threat to the social order, requiring various forms of remedial action.
This paper suggests that cities, places and spaces and those who
seek to use them, can be resilient in working to maintain and extend
democratic freedoms and processes enshrined in Marshall’s concept
of citizenship, calling sensor and surveillance systems to account.
Such accountability could better inform the implementation of public
policy around the design, build and governance of public space and
also understandings of urban citizenship in the sensor saturated urban
environment.
Abstract: We report on the use of strong external optical
feedback to enhance the modulation response of semiconductor lasers
over a frequency passband around modulation frequencies higher
than 60 GHz. We show that this modulation enhancement is a type of
photon-photon resonance (PPR) of oscillating modes in the external
cavity formed between the laser and the external reflector. The study
is based on a time-delay rate equation model that takes into account
both the strong feedback and multiple reflections in the external
cavity. We examine the harmonic and intermodulation distortions
associated with single and two-tone modulations in the mm-wave
band of the resonant modulation. We show that compared with
solitary lasers modulated around the carrier-photon resonance
frequency, the present mm-wave modulated signal has lower
distortions.
Abstract: We model and simulate the combined effect of fiber
dispersion and frequency chirp of a directly modulated high-speed
laser diode on the figures of merit of a non-amplified 40-Gbps optical
fiber link. We consider both the return to zero (RZ) and non-return to
zero (NRZ) patterns of the pseudorandom modulation bits. The
performance of the fiber communication system is assessed by the
fiber-length limitation due to the fiber dispersion. We study the
influence of replacing standard single-mode fibers by non-zero
dispersion-shifted fibers on the maximum fiber length and evaluate
the associated power penalty. We introduce new dispersion
tolerances for 1-dB power penalty of the RZ and NRZ 40-Gbps
optical fiber links.
Abstract: Today’s modern interconnected power system is
highly complex in nature. In this, one of the most important
requirements during the operation of the electric power system is the
reliability and security. Power and frequency oscillation damping
mechanism improve the reliability. Because of power system
stabilizer (PSS) low speed response against of major fault such as
three phase short circuit, FACTs devise that can control the network
condition in very fast time, are becoming popular. But FACTs
capability can be seen in a major fault present when nonlinear models
of FACTs devise and power system equipment are applied. To realize
this aim, the model of multi-machine power system with FACTs
controller is developed in MATLAB/SIMULINK using Sim Power
System (SPS) blockiest. Among the FACTs device, Static
synchronous series compensator (SSSC) due to high speed changes
its reactance characteristic inductive to capacitive, is effective power
flow controller. Tuning process of controller parameter can be
performed using different method. But Genetic Algorithm (GA)
ability tends to use it in controller parameter tuning process. In this
paper firstly POD controller is used to power oscillation damping.
But in this station, frequency oscillation dos not has proper damping
situation. So FOD controller that is tuned using GA is using that
cause to damp out frequency oscillation properly and power
oscillation damping has suitable situation.
Abstract: The extermination and proper disposal of
pharmaceutical wastes from expired and unused medications remains
a disputable issue due to their specific nature and characteristics.
Even though the hazards from these wastes are already well known in
terms of environment and human health, people still treat them as
usual wastes. At a national level, in many countries the management
of pharmaceutical and medical wastes has been one of the main
objectives in order to protect people’s health and the environment.
Even though many legal regulations exist in this respect, there has not
been a single law that would clearly explain the procedures of
returning medicines, ways of selection, treatment and extermination
of pharmaceutical wastes. This paper aims at analyzing the practices
of pharmaceutical waste management and treatment in some
European countries as well as a review of the legislation and official
guidelines in managing these kinds of wastes and protecting the
environment and human health. A suitable treatment and
management of expired medications and other similar wastes would
be in the interest of public health in the first place, as well as in the
interest of healthcare institutions and other bodies engaged in
environment protection.
Abstract: Corrosion inhibitors are widely used in concrete
industry to reduce the corrosion rate of steel rebar which is present in
contact with aggressive environments. The present work aims to
using Zamzam water from well located within the Masjid al-Haram
in Mecca, Saudi Arabia 20 m (66 ft) east of the Kaaba, the holiest
place in Islam as corrosion inhibitor for steel in rain water and
simulated acid rain. The effect of Zamzam water was investigated by
electrochemical impedance spectroscopy (EIS) and Potentiodynamic
polarization techniques in Department of Civil Engineering - IUT
Saint-Nazaire, Nantes University, France. Zamzam water is
considered to be one of the most important steel corrosion inhibitor
which is frequently used in different industrial applications. Results
showed that zamzam water gave a very good inhibition for steel
corrosion in rain water and simulated acid rain.
Abstract: Ontologies provide a common understanding of a
specific domain of interest that can be communicated between people
and used as background knowledge for automated reasoning in a
wide range of applications. In this paper, we address the design of
multilingual ontologies following well-defined knowledge
engineering methodologies with the support of novel collaborative
development approaches. In particular, we present a collaborative
platform which allows ontologies to be developed incrementally in
multiple languages. This is made possible via an appropriate mapping
between language independent concepts and one lexicalization per
language (or a lexical gap in case such lexicalization does not exist).
The collaborative platform has been designed to support the
development of the Universal Knowledge Core, a multilingual
ontology currently in English, Italian, Chinese, Mongolian, Hindi and
Bangladeshi. Its design follows a workflow-based development
methodology that models resources as a set of collaborative objects
and assigns customizable workflows to build and maintain each
collaborative object in a community driven manner, with extensive
support of modern web 2.0 social and collaborative features.
Abstract: Regardless of the manufacturing process used,
subtractive or additive, material, purpose and application, produced
components are conventionally solid mass with more or less complex
shape depending on the production technology selected. Aspects
such as reducing the weight of components, associated with the low
volume of material required and the almost non-existent material
waste, speed and flexibility of production and, primarily, a high
mechanical strength combined with high structural performance, are
competitive advantages in any industrial sector, from automotive,
molds, aviation, aerospace, construction, pharmaceuticals, medicine
and more recently in human tissue engineering. Such features,
properties and functionalities are attained in metal components
produced using the additive technique of Rapid Prototyping from
metal powders commonly known as Selective Laser Melting (SLM),
with optimized internal topologies and varying densities. In order to
produce components with high strength and high structural and
functional performance, regardless of the type of application, three
different internal topologies were developed and analyzed using
numerical computational tools. The developed topologies were
numerically submitted to mechanical compression and four point
bending testing. Finite Element Analysis results demonstrate how
different internal topologies can contribute to improve mechanical
properties, even with a high degree of porosity relatively to fully
dense components. Results are very promising not only from the
point of view of mechanical resistance, but especially through the
achievement of considerable variation in density without loss of
structural and functional high performance.
Abstract: This paper reviews the internal use of blogs and their
potential effectiveness as organisational learning tools. Since the
emergence of the concept of ‘Enterprise 2.0’ there remains a lack of
empirical evidence associated with how organisations are applying
social media tools and whether they are effective towards supporting
organisational learning. Surprisingly, blogs, one of the more
traditional social media tools, still remains under-researched in the
context of ‘Enterprise 2.0’ and organisational learning. The aim of
this paper is to identify the theoretical linkage between blogs and
organisational learning in addition to reviewing prior research on
organisational blogging exploring why this area remains underresearched.
Through a literature review, one of the principal findings
of this paper is that organisational blogs have a mutual compatibility
with the interpretivist aspect of organisational learning. This paper
further advocates that further empirical work in this subject area is
required to substantiate this theoretical assumption.