Abstract: The use of power system stabilizers (PSSs) to damp
power system swing mode of oscillations is practical important. Our
purpose is to retune the power system stabilizer (PSS1A) parameters
in Unitrol D produced by ABB– was installed in 1995in Benghazi
North Power Plants (BNPPs) at General Electricity Company of
Libya (GECOL). The optimal values of the power system stabilizer
(PSS1A) parameters are determined off-line by a particle swarm
optimization technique (PSO). The objective is to damp the local and
inter-area modes of oscillations that occur following power system
disturbances. The retuned power system stabilizer (PSS1A) can cope
with large disturbance at different operating points and has enhanced
power system stability.
Abstract: The main objective of this paper is to analyse the influence of preparation and control of orders on performance. The focused activities explored in this research are: procurement, production and distribution. These changes in performance were obtained through improvement of the supply chain. It is proved using all the company activities that it is possible to increase de efficiency and do services in an adequate way, placing the products in the market efficiently. For that, it was explored the importance of the supply chain, with privilege to the practical environment and the quantification of the obtained results.
Abstract: This study presents a new approach based on Tanaka's
fuzzy linear regression (FLP) algorithm to solve well-known power
system economic load dispatch problem (ELD). Tanaka's fuzzy linear
regression (FLP) formulation will be employed to compute the
optimal solution of optimization problem after linearization. The
unknowns are expressed as fuzzy numbers with a triangular
membership function that has middle and spread value reflected on
the unknowns. The proposed fuzzy model is formulated as a linear
optimization problem, where the objective is to minimize the sum of
the spread of the unknowns, subject to double inequality constraints.
Linear programming technique is employed to obtain the middle and
the symmetric spread for every unknown (power generation level).
Simulation results of the proposed approach will be compared with
those reported in literature.
Abstract: In this paper, a new formulation for acoustics coupled with linear elasticity is presented. The primary objective of the work is to develop a three dimensional hp adaptive finite element method code destinated for modeling of acoustics of human head. The code will have numerous applications e.g. in designing hearing protection devices for individuals working in high noise environments. The presented work is in the preliminary stage. The variational formulation has been implemented and tested on a sequence of meshes with concentric multi-layer spheres, with material data representing the tissue (the brain), skull and the air. Thus, an efficient solver for coupled elasticity/acoustics problems has been developed, and tested on high contrast material data representing the human head.
Abstract: Recently studies in area of supply chain network
(SCN) have focused on the disruption issues in distribution systems.
Also this paper extends the previous literature by providing a new biobjective
model for cost minimization of designing a three echelon
SCN across normal and failure scenarios with considering multi
capacity option for manufacturers and distribution centers. Moreover,
in order to solve the problem by means of LINGO software, novel
model will be reformulated through a branch of LP-Metric method
called Min-Max approach.
Abstract: The objective of this paper is to use the Pfaffian
technique to construct different classes of exact Pfaffian solutions and
N-soliton solutions to some of the generalized integrable nonlinear
partial differential equations in (3+1) dimensions. In this paper, I will
show that the Pfaffian solutions to the nonlinear PDEs are nothing but
Pfaffian identities. Solitons are among the most beneficial solutions
for science and technology, from ocean waves to transmission of
information through optical fibers or energy transport along protein
molecules. The existence of multi-solitons, especially three-soliton
solutions, is essential for information technology: it makes possible
undisturbed simultaneous propagation of many pulses in both directions.
Abstract: Buildings and associated construction methods have a significant impact on the environment. As construction activity increases in Kuwait, there is a need to create design and construction strategies which will minimize the environmental impact of new buildings. Green construction is a design philosophy intended to improve the sustainability of construction by the minimization of resource depletion and CO2 emissions throughout the life cycle of buildings. This paper presents and discusses the results of a survey that was conducted in Kuwait, with the objective of investigating the awareness of developers and other stakeholders regarding their understanding and use of green construction strategies. The results of the survey demonstrate that whilst there seems to be a reasonable level of awareness amongst the stakeholders, this awareness is not currently well reflected in the design and construction practices actually being applied. It is therefore concluded is there is a pressing need for intervention from Government in order that the use of sustainable green design and construction strategies becomes the norm in Kuwait.
Abstract: Although agriculture is an important part of the world
economy, accounting in agriculture still has many shortcomings. The
adoption of IAS 41 “Agriculture” has tried to improve this situation
and increase the comparability of financial statements of entities in
the agricultural sector. Although controversial, IAS 41 is the first
step of a consistent transition to fair value assessment in the
agricultural sector. The objective of our work is the analysis of IAS
41 and current accounting agricultural situation in Romania.
Accounting regulations in Romania are in accordance with European
directives and, in many respects, converged with IFRS referential.
Provisions of IAS 41, however, are not reflected directly in
Romanian regulations. With the increase of forest land transactions,
it is expected that recognition and measurement of biological assets
under IAS 41 to become a necessity.
Abstract: This paper presents a methodology for operational and
economic characteristics based evaluation and selection of a power
plant using Graph theoretic approach. A universal evaluation index
on the basis of Operational and economics characteristics of a plant is
proposed which evaluates and ranks the various types of power plants.
The index thus obtained from the pool of operational characteristics
of the power plant attributes Digraph. The Digraph is developed
considering Operational and economics attributes of the power plants
and their relative importance for their smooth operation, installation
and commissioning and prioritizing their selection. The sensitivity
analysis of the attributes towards the objective has also been carried
out in order to study the impact of attributes over the desired outcome
i.e. the universal operational-economics index of the power plant.
Abstract: This paper presents a method for the optimal
allocation of Distributed generation in distribution systems. In this
paper, our aim would be optimal distributed generation allocation for
voltage profile improvement and loss reduction in distribution
network. Genetic Algorithm (GA) was used as the solving tool,
which referring two determined aim; the problem is defined and
objective function is introduced. Considering to fitness values
sensitivity in genetic algorithm process, there is needed to apply load
flow for decision-making. Load flow algorithm is combined
appropriately with GA, till access to acceptable results of this
operation. We used MATPOWER package for load flow algorithm
and composed it with our Genetic Algorithm. The suggested method
is programmed under MATLAB software and applied ETAP
software for evaluating of results correctness. It was implemented on
part of Tehran electricity distributing grid. The resulting operation of
this method on some testing system is illuminated improvement of
voltage profile and loss reduction indexes.
Abstract: The objective of this research was to investigate the efficiency of the light emitting diode (LED) tube in various color lights used to lure the adult coconut hispine beetle. The research was conducted by setting the forward bias on LED tubes, and the next step was to test luminous efficacy and quantity of electricity used to power each LED tube in different color lights. Finally, the researcher examined the efficiency of each color-light LED tube to lure the adult coconut hispine beetle.
The results showed that the ultraviolet LED tubes had the most capacity to allure the adult coconut hispine beetles with the percentage of 82.92, followed by the blue LED tubes with the percentage of 59.76. Whereas the yellow, pink, red and warm white LED tubes had no influence to the adult coconut hispine beetles.
Abstract: Almost all universities include some form of assignment in their courses. The assignments are either carried out in either in groups or individually. To effectively manage these submitted assignments, a well-designed assignment submission system is needed, hence the need for an online assignment submission system to facilitate the distribution, and collection of assignments on due dates. The objective of such system is to facilitate interaction of lecturers and students for assessment and grading purposes. The aim of this study was to create a web based online assignment submission system for University of Mauritius. The system was created to eliminate the traditional process of giving an assignment and collecting the answers for the assignment. Lecturers can also create automated assessment to assess the students online. Moreover, the online submission system consists of an automatic mailing system which acts as a reminder for students about the deadlines of the posted assignments. System was tested to measure its acceptance rate among both student and lecturers.
Abstract: The aim of the work was to attenuate the vibration amplitude in CESNA 172 airplane wing by using Functionally Graded Material instead of uniform or composite material. Wing strength was achieved by means of stress analysis study, while wing vibration amplitudes and shapes were achieved by means of Modal and Harmonic analysis. Results were verified by applying the methodology in a simple cantilever plate to the simple model and the results were promising and the same methodology can be applied to the airplane wing model. Aluminum models, Titanium models, and functionally graded materials of Aluminum and titanium results were compared to show a great vibration attenuation after using the FGM. Optimization in FGM gradation satisfied our objective of reducing and attenuating the vibration amplitudes to show the effect of using FGM in vibration behavior. Testing the Aluminum rich models, and comparing it with the titanium rich model was an optimization in this paper. Results have shown a significant attenuation in vibration magnitudes when using FGM instead of Titanium Plate, and Aluminium wing with FGM Spurs instead of Aluminium wings. It was also recommended that in future, changing the graphical scale to 1:10 or even 1:1 when the computers- capabilities allow.
Abstract: Feeder is one of the airships of the Multibody Advanced Airship for Transport (MAAT) system, under development within the EU FP7 project. MAAT is based on a modular concept composed of two different parts that have the possibility to join; respectively they are the so-called Cruiser and Feeder, designed on the lighter than air principle. Feeder, also named ATEN (Airship Transport Elevator Network), is the smaller one which joins the bigger one, Cruiser, also named PTAH (Photovoltaic modular Transport Airship for High altitude),envisaged to happen at 15km altitude. During the MAAT design phase, the aerodynamic studies of the both airships and their interactions are analyzed. The objective of these studies is to understand the aerodynamic behavior of all the preselected configurations, as an important element in the overall MAAT system design. The most of these configurations are only simulated by CFD, while the most feasible one is experimentally analyzed in order to validate and thrust the CFD predictions. This paper presents the numerical and experimental investigation of the Feeder “conical like" shape configuration. The experiments are focused on the aerodynamic force coefficients and the pressure distribution over the Feeder outer surface, while the numerical simulation cover also the analysis of the velocity and pressure distribution. Finally, the wind tunnel experiment is compared with its CFD model in order to validate such specific simulations with respective experiments and to better understand the difference between the wind tunnel and in-flight circumstances.
Abstract: Milk is a very important nutrient. Low productivity is
a problem of Turkish dairy farming. During recent years, Turkish government has supported cooperatives that assist milk producers and
encouraged farmers to become cooperative members. Turkish
government established several ways to support specially smallholders. For example Ministry of Agriculture and Rural Affairs
(MARA) provided two to four cows to villagers on a grant or loan basis with a long repayment period at low interest rates by
cooperatives. Social Support Project in Rural Areas (SSPRA) is
another support program targeting only disadvantaged people,
especially poor villager. Both programs have a very strong social
support component and similar objectives. But there are minor
differences between them in terms of target people, terms and conditions of the credit supplied Isparta province in Mediterranean region of Turkey is one of the
supported regions. MARA distributed dairy cows to 1072 farmers through 16 agricultural cooperatives in Isparta province in the context
of SSPRA. In this study, economic-social impacts on dairy cattle project
implemented through cooperatives were examined in Isparta. Primary data were collected from 12 cooperatives- president. The
data were obtained by personal interview through a questionnaire and
to cooperatives and given to farms benefiting from the project in
order to reveal the economic and social developments.
Finding of the study revealed that project provided new job
opportunities and improved quality of livestock. It was found that producers who benefited from the project were more willing to
participate in cooperative or other producer organizations.
Abstract: The objective of this study is to identify the factors
that influence the online purchasing loyalty for Thai herbal products.
Survey research is used to gather data from Thai herb online
merchants to assess factors that have impacts on enhancing loyalty.
Data were collected from 300 online customers who had experience
in online purchasing of Thai Herbal products. Prior experience
consists of data from previous usage of online herbs, herb purchase
and internet usage. E-Quality data consists of information quality,
system quality, service quality and the product quality of Thai herbal
products sold online. The results suggest that prior experience, Equality,
attitude toward purchase and trust in online merchant have
major impacts on loyalty. The good attitude and E-Quality of
purchasing Thai herbal product online are the most significant
determinants affecting loyalty.
Abstract: Sport is one of the sectors in which the largest
technical projections regarding the functions of textiles can be found.
He is a large consumer of high performance composite materials and
new fibers. It is one of the sectors where the innovation is the most
important when the greatest numbers of spectacular developments are
aimed at increasing performance. In medicine, textile innovation is
used and contributes in the amelioration of different materials such as
dressing, orthosis, bandages, etc. The hygienic textiles in non-woven
materials record a strong growth. The objective of this study is to
show the different advances of development we obtained in the both
ways (sport and medicine). Polyamide fibers where developed
tacking into account the specification of the high level athlete’s
performance like swimming and triathlon (Olympic Games, Brazil
2016). The first textile utilization was for skiing (Olympic Games,
Sotchi 2014). The different textiles technologies where adapted for
medicine.
Abstract: This paper presents optimal based damping controllers of Unified Power Flow Controller (UPFC) for improving the damping power system oscillations. The design problem of UPFC damping controller and system configurations is formulated as an optimization with time domain-based objective function by means of Adaptive Tabu Search (ATS) technique. The UPFC is installed in Single Machine Infinite Bus (SMIB) for the performance analysis of the power system and simulated using MATLAB-s simulink. The simulation results of these studies showed that designed controller has an tremendous capability in damping power system oscillations.
Abstract: An experiment was conducted using two aeration
methods (water-into-air and air-into-water) and followed by filtration
processes using manganese greensand material. The properties of
groundwater such as pH, dissolved oxygen, turbidity and heavy metal
concentration (iron and manganese) will be assessed. The objectives
of this study are i) to determine the effective aeration method and ii)
to assess the effectiveness of manganese greensand as filter media in
removing iron and manganese concentration in groundwater. Results
showed that final pH for all samples after treatment are in range from
7.40 and 8.40. Both aeration methods increased the dissolved oxygen
content. Final turbidity for groundwater samples are between 3 NTU
to 29 NTU. Only three out of eight samples achieved iron
concentration of 0.3mg/L and less and all samples reach manganese
concentration of 0.1mg/L and less. Air-into-water aeration method
gives higher percentage of iron and manganese removal compare to
water-into-air method.
Abstract: Quality evaluation of an image is an important task in image processing applications. In case of image compression, quality of decompressed image is also the criterion for evaluation of given coding scheme. In the process of compression -decompression various artifacts such as blocking artifacts, blur artifact, ringing or edge artifact are observed. However quantification of these artifacts is a difficult task. We propose here novel method to quantify blur and ringing artifact in an image.