Abstract: The pursuit of the MPPT has led to the development of many kinds of controllers, one of which is the Fuzzy Logic controller, which has proven its worth. To further tune this controller this paper will discuss and analyze the use of Genetic Algorithms to tune the Fuzzy Logic Controller. It will provide an introduction to both systems, and test their compatibility and performance.
Abstract: Internet financial reporting and corporate governance
issues are in the focus of academic and professional studies due to
their attributed importance by stakeholders of corporations. Major
aim of this study is to reveal the relationship between internet
financial reporting which is held as dependent variable and some
indicators of corporate governance such as the ratio of managerial
ownership, blockholder ownership, number of independent members
in the board of directors, frequency of meetings by audit committee
and education level of audit committee members which are held as
independent variables. Main purpose is to reveal the effect of
corporate governance on the voluntary efforts of Internet Financial
reporting. The scope of the research is limited to the Turkish
Corporations listed in Borsa Istanbul (Istanbul Stock Exchange) and
findings which are generated by means of SPSS software are revealed
in results section and interpreted in conclusions.
Abstract: Future mobile networks following 5th generation will
be characterized by one thousand times higher gains in capacity;
connections for at least one hundred billion devices; user experience
capable of extremely low latency and response times. To be close to
the capacity requirements and higher reliability, advanced
technologies have been studied, such as multiple connectivity, small
cell enhancement, heterogeneous networking, and advanced
interference and mobility management. This paper is focused on the
multiple connectivity in heterogeneous cellular networks. We
investigate the performance of coverage and user throughput in several
deployment scenarios. Using the stochastic geometry approach, the
SINR distributions and the coverage probabilities are derived in case
of dual connection. Also, to compare the user throughput enhancement
among the deployment scenarios, we calculate the spectral efficiency
and discuss our results.
Abstract: IEEE 802.11a/b/g standards provide multiple
transmission rates, which can be changed dynamically according to the
channel condition. Cooperative communications were introduced to
improve the overall performance of wireless LANs with the help of
relay nodes with higher transmission rates. The cooperative
communications are based on the fact that the transmission is much
faster when sending data packets to a destination node through a relay
node with higher transmission rate, rather than sending data directly to
the destination node at low transmission rate. To apply the cooperative
communications in wireless LAN, several MAC protocols have been
proposed. Some of them can result in collisions among relay nodes in a
dense network. In order to solve this problem, we propose a new
protocol. Relay nodes are grouped based on their transmission rates.
And then, relay nodes only in the highest group try to get channel
access. Performance evaluation is conducted using simulation, and
shows that the proposed protocol significantly outperforms the
previous protocol in terms of throughput and collision probability.
Abstract: Learning Management System (LMS) is the system
which uses to manage the learning in order to grouping the content
and learning activity between the lecturer and learner including
online examination and evaluation. Nowadays, it is the borderless
learning era so the learning activities can be accessed from
everywhere in the world and also anytime via the information
technology and media. The learner can easily access to the
knowledge so the different in time and distance is not a constraint for
learning anymore.
The learning pattern which was used in this research is the
integration of the in-class learning and online learning via internet
and will be able to monitor the progress by the Learning management
system which will create the fast response and accessible learning
process via the social media. In order to increase the capability and
freedom of the learner, the system can show the current and history
of the learning document, video conference and also has the chat
room for the learner and lecturer to interact to each other.
So the objectives of the “The Design and Applied of Learning
Management System via Social Media on Internet: Case Study of
Operating System for Business Subject” are to expand the
opportunity of learning and to increase the efficiency of learning as
well as increase the communication channel between lecturer and
student. The data of this research was collect from 30 users of the
system which are students who enroll in the subject. And the result of
the research is in the “Very Good” which is conformed to the
hypothesis.
Abstract: This paper outlines the basic installation and operation of magnetic inductive flow velocity sensors on large underground cooling water pipelines. Research on the effects of cathodic protection as well as into other factors that might influence the overall performance of the meter is presented in this paper. The experiments were carried out on an immersion type magnetic meter specially used for flow measurement of cooling water pipeline. An attempt has been made in this paper to outline guidelines that can ensure accurate measurement related to immersion type magnetic meters on underground pipelines.
Abstract: For a bluff body, dimples behave like roughness
elements in stimulating a turbulent boundary layer, leading to delayed
flow separation, a smaller wake and lower form drag. This is very
different in principle from the application of dimples to streamlined
body, where any reduction in drag would be predominantly due to a
reduction in skin friction. In the present work, a car model with
different dimple geometry is simulated using k-ε turbulence modeling
to determine its effect to the aerodynamics performance. Overall, the
results show that the application of dimples manages to reduce the
drag coefficient of the car model.
Abstract: China is currently the world's largest producer and distributor of electric bicycle (e-bike). The increasing number of e-bikes on the road is accompanied by rising injuries and even deaths of e-bike drivers. Therefore, there is a growing need to improve the safety structure of e-bikes. This 3D frictionless contact analysis is a preliminary, but necessary work for further structural design improvement of an e-bike. The contact analysis between e-bike and the ground was carried out as follows: firstly, the Penalty method was illustrated and derived from the simplest spring-mass system. This is one of the most common methods to satisfy the frictionless contact case; secondly, ANSYS static analysis was carried out to verify finite element (FE) models with contact pair (without friction) between e-bike and the ground; finally, ANSYS transient analysis was used to obtain the data of the penetration p(u) of e-bike with respect to the ground. Results obtained from the simulation are as estimated by comparing with that from theoretical method. In the future, protective shell will be designed following the stability criteria and added to the frame of e-bike. Simulation of side falling of the improvedsafety structure of e-bike will be confirmed with experimental data.
Abstract: The aim of this work is to build a model based on
tissue characterization that is able to discriminate pathological and
non-pathological regions from three-phasic CT images. With our
research and based on a feature selection in different phases, we are
trying to design a neural network system with an optimal neuron
number in a hidden layer. Our approach consists of three steps:
feature selection, feature reduction, and classification. For each
region of interest (ROI), 6 distinct sets of texture features are
extracted such as: first order histogram parameters, absolute gradient,
run-length matrix, co-occurrence matrix, autoregressive model, and
wavelet, for a total of 270 texture features. When analyzing more
phases, we show that the injection of liquid cause changes to the high
relevant features in each region. Our results demonstrate that for
detecting HCC tumor phase 3 is the best one in most of the features
that we apply to the classification algorithm. The percentage of
detection between pathology and healthy classes, according to our
method, relates to first order histogram parameters with accuracy of
85% in phase 1, 95% in phase 2, and 95% in phase 3.
Abstract: Wind energy offers a significant advantage such as no
fuel costs and no emissions from generation. However, wind energy
sources are variable and non-dispatchable. The utility grid is able to
accommodate the variability of wind in smaller proportion along with
the daily load. However, at high penetration levels, the variability can
severely impact the utility reserve requirements and the cost
associated with it. In this paper the impact of wind energy is
evaluated in detail in formulating the total utility cost. The objective
is to minimize the overall cost of generation while ensuring the
proper management of the load. Overall cost includes the curtailment
cost, reserve cost and the reliability cost, as well as any other penalty
imposed by the regulatory authority. Different levels of wind
penetrations are explored and the cost impacts are evaluated. As the
penetration level increases significantly, the reliability becomes a
critical question to be answered. Here we increase the penetration
from the wind yet keep the reliability factor within the acceptable
limit provided by NERC. This paper uses an economic dispatch (ED)
model to incorporate wind generation into the power grid. Power
system costs are analyzed at various wind penetration levels using
Linear Programming. The goal of this study is show how the
increases in wind generation will affect power system economics.
Abstract: The wide use of the Internet-based applications bring many challenges to the researchers to guarantee the continuity of the connections needed by the mobile hosts and provide reliable Internet access for them. One of proposed solutions by Internet Engineering Task Force (IETF) is to connect the local, multi-hop, and infrastructure-less Mobile Ad hoc Network (MANET) with Internet structure. This connection is done through multi-interface devices known as Internet Gateways. Many issues are related to this connection like gateway discovery, handoff, address auto-configuration and selecting the optimum gateway when multiple gateways exist. Many studies were done proposing gateway selection schemes with a single selection criterion or weighted multiple criteria. In this research, a review of some of these schemes is done showing the differences, the features, the challenges and the drawbacks of each of them.
Abstract: Mechanical stress has a strong effect on the magnitude
of the Barkhausen-noise in structural steels. Because the
measurements are performed at the surface of the material, for a
sample sheet, the full effect can be described by a biaxial stress field.
The measured Barkhausen-noise is dependent on the orientation of
the exciting magnetic field relative to the axis of the stress tensor.
The sample inhomogenities including the residual stress also
modifies the angular dependence of the measured Barkhausen-noise.
We have developed a laboratory device with a cross like specimen
for bi-axial bending. The measuring head allowed performing
excitations in two orthogonal directions. We could excite the two
directions independently or simultaneously with different amplitudes.
The simultaneous excitation of the two coils could be performed in
phase or with a 90 degree phase shift. In principle this allows to
measure the Barkhausen-noise at an arbitrary direction without
moving the head, or to measure the Barkhausen-noise induced by a
rotating magnetic field if a linear superposition of the two fields can
be assumed.
Abstract: The Cone Penetration Test (CPT) is a common in-situ
test which generally investigates a much greater volume of soil more
quickly than possible from sampling and laboratory tests. Therefore,
it has the potential to realize both cost savings and assessment of soil
properties rapidly and continuously. The principle objective of this
paper is to demonstrate the feasibility and efficiency of using
artificial neural networks (ANNs) to predict the soil angle of internal
friction (Φ) and the soil modulus of elasticity (E) from CPT results
considering the uncertainties and non-linearities of the soil. In
addition, ANNs are used to study the influence of different
parameters and recommend which parameters should be included as
input parameters to improve the prediction. Neural networks discover
relationships in the input data sets through the iterative presentation
of the data and intrinsic mapping characteristics of neural topologies.
General Regression Neural Network (GRNN) is one of the powerful
neural network architectures which is utilized in this study. A large
amount of field and experimental data including CPT results, plate
load tests, direct shear box, grain size distribution and calculated data
of overburden pressure was obtained from a large project in the
United Arab Emirates. This data was used for the training and the
validation of the neural network. A comparison was made between
the obtained results from the ANN's approach, and some common
traditional correlations that predict Φ and E from CPT results with
respect to the actual results of the collected data. The results show
that the ANN is a very powerful tool. Very good agreement was
obtained between estimated results from ANN and actual measured
results with comparison to other correlations available in the
literature. The study recommends some easily available parameters
that should be included in the estimation of the soil properties to
improve the prediction models. It is shown that the use of friction
ration in the estimation of Φ and the use of fines content in the
estimation of E considerable improve the prediction models.
Abstract: The performance and analysis of speech recognition
system is illustrated in this paper. An approach to recognize the
English word corresponding to digit (0-9) spoken by 2 different
speakers is captured in noise free environment. For feature extraction,
speech Mel frequency cepstral coefficients (MFCC) has been used
which gives a set of feature vectors from recorded speech samples.
Neural network model is used to enhance the recognition
performance. Feed forward neural network with back propagation
algorithm model is used. However other speech recognition
techniques such as HMM, DTW exist. All experiments are carried
out on Matlab.
Abstract: Human leukocyte antigen (HLA) typing from next
generation sequencing (NGS) data has the potential for applications in
clinical laboratories and population genetic studies. Here we introduce
a novel technique for HLA typing from NGS data based on
read-mapping using a comprehensive reference panel containing all
known HLA alleles and de novo assembly of the gene-specific short
reads. An accurate HLA typing at high-digit resolution was achieved
when it was tested on publicly available NGS data, outperforming
other newly-developed tools such as HLAminer and PHLAT.
Abstract: Experimental & numeral study of temperature
distribution during milling process, is important in milling quality
and tools life aspects. In the present study the milling cross-section
temperature is determined by using Artificial Neural Networks
(ANN) according to the temperature of certain points of the work
piece and the point specifications and the milling rotational speed of
the blade. In the present work, at first three-dimensional model of the
work piece is provided and then by using the Computational Heat
Transfer (CHT) simulations, temperature in different nods of the
work piece are specified in steady-state conditions. Results obtained
from CHT are used for training and testing the ANN approach. Using
reverse engineering and setting the desired x, y, z and the milling
rotational speed of the blade as input data to the network, the milling
surface temperature determined by neural network is presented as
output data. The desired points temperature for different milling
blade rotational speed are obtained experimentally and by
extrapolation method for the milling surface temperature is obtained
and a comparison is performed among the soft programming ANN,
CHT results and experimental data and it is observed that ANN soft
programming code can be used more efficiently to determine the
temperature in a milling process.
Abstract: The aim of this study was to build ‘Ubi-Net’, a
decision-making support system for systematic establishment in
U-City planning. We have experienced various urban problems caused
by high-density development and population concentrations in
established urban areas. To address these problems, a U-Service
contributes to the alleviation of urban problems by providing real-time
information to citizens through network connections and related
information. However, technology, devices, and information for
consumers are required for systematic U-Service planning in towns
and cities where there are many difficulties in this regard, and a lack of
reference systems.
Thus, this study suggests methods to support the establishment of
sustainable planning by providing comprehensive information
including IT technology, devices, news, and social networking
services (SNS) to U-City planners through intelligent searches. In this
study, we targeted Smart U-Parking Planning to solve parking
problems in an ‘old’ city. Through this study, we sought to contribute
to supporting advances in U-Space and the alleviation of urban
problems.
Abstract: Nic Pizzolatto’s True Detective offers profound
mythological and philosophical ramblings for audiences with literary
sensibilities. An American Sothern Gothic with its Bayon landscape
of the Gulf Coast of Louisiana, where two detectives Rustin Cohle
and Martin Hart begin investigating the isolated murder of Dora
Lange, only to discover an entrenched network of perversion and
corruption, offers an existential outlook. The proposed research paper
shall attempt to investigate the pervasive themes of gothic and
existentialism in the music of the first season of the series.
Abstract: Doxorubicin, also known as Adriamycin, is an
anthracycline class of drug used in cancer chemotherapy. It is used in
the treatment of non-Hodgkin’s lymphoma, multiple myeloma, acute
leukemia, breast cancer, lung cancer, endometrium cancer and ovary
cancers. It functions via intercalating DNA and ultimately killing
cancer cells. The major side effects of doxorubicin are hair loss,
myelosuppression, nausea & vomiting, oesophagitis, diarrhea, heart
damage and liver dysfunction. The minor modifications in the
structure of compound exhibit large variation in the biological
activity, has prompted us to carry out the synthesis of sulfonamide
derivatives. Sulfonamide is an important feature with broad spectrum
of biological activity such as antiviral, antifungal, diuretics, antiinflammatory,
antibacterial and anticancer activities. Structure of the
synthesized compound N-(1-methyl-2-oxo-2-N-methyl anilinoethyl)
benzene sulfonamide confirmed by proton nuclear magnetic
resonance (1H NMR),13C NMR, Mass and FTIR spectroscopic tools
to assure the position of all protons and hence stereochemistry of the
molecule. Further we have reported the binding potential of
synthesized sulfonamide analogues in comparison to doxorubicin
drug using Auto Dock 4.2 software. Computational binding energy
(B.E.) and inhibitory constant (Ki) has been evaluated for the
synthesized compound in comparison of doxorubicin against Poly
(dA-dT).Poly (dA-dT) and Poly (dG-dC).Poly (dG-dC) sequences.
The in vitro cytotoxic study against human breast cancer cell lines
confirms the better anticancer activity of the synthesized compound
over currently in use anticancer drug doxorubicin. The IC50 value of
the synthesized compound is 7.12 μM whereas for doxorubicin is 7.2
μM.
Abstract: A quartz crystal microbalance (QCM) nanosensor was developed to detect lysozyme enzyme by functionalizing its gold surface with the attachment of poly(methacroyl-L-phenylalanine) (PMAPA) nanoparticles. PMAPA was chosen as a hydrophobic matrix. The hydrophobic nanoparticles were synthesized by micro-emulsion polymerization method. Hydrophobic QCM nanosensor was tested for real time detection of lysozyme enzyme from aqueous solution. The kinetic and affinity studies were determined by using lysozyme solutions with different concentrations. The responses related with mass (Δm) and frequency (Δf) shifts were used to evaluate adsorption properties.