Abstract: Synthesis gas manufacturing by steam reforming of hydrocarbons is an important industrial process. High endothermic nature of the process makes it one of the most cost and heat intensive processes. In the present work, composite effect of different inert gases on synthesis gas yield, feed gas conversion and temperature distribution along the reactor length has been studied using a heterogeneous model. Mathematical model was developed as a first stage and validated against the existing process models. With the addition of inert gases, a higher yield of synthesis gas is observed. Simultaneously the rector outlet temperature drops to as low as 810 K. It was found that Xenon gives the highest yield and conversion while Helium gives the lowest temperature. Using Xenon inert gas 20 percent reduction in outlet temperature was observed compared to traditional case.
Abstract: This paper presents two simplified models to
determine nodal voltages in power distribution networks. These
models allow estimating the impact of the installation of reactive
power compensations equipments like fixed or switched capacitor
banks. The procedure used to develop the models is similar to the
procedure used to develop linear power flow models of transmission
lines, which have been widely used in optimization problems of
operation planning and system expansion. The steady state non-linear
load flow equations are approximated by linear equations relating the
voltage amplitude and currents. The approximations of the linear
equations are based on the high relationship between line resistance
and line reactance (ratio R/X), which is valid for power distribution
networks. The performance and accuracy of the models are evaluated
through comparisons with the exact results obtained from the
solution of the load flow using two test networks: a hypothetical
network with 23 nodes and a real network with 217 nodes.
Abstract: Background: Dialign is a DNA/Protein alignment tool
for performing pairwise and multiple pairwise alignments through the
comparison of gap-free segments (fragments) between sequence
pairs. An alignment of two sequences is a chain of fragments, i.e
local gap-free pairwise alignments, with the highest total score.
METHOD: A new approach is defined in this article which relies on
the concept of using three-dimensional fragments – i.e. local threeway
alignments -- in the alignment process instead of twodimensional
ones. These three-dimensional fragments are gap-free
alignments constituting of equal-length segments belonging to three
distinct sequences. RESULTS: The obtained results showed good
improvments over the performance of DIALIGN.
Abstract: We propose that Virtual Learning Environments (VLEs) should be designed by taking into account the characteristics, the special needs and the specific operating rules of the academic institutions in which they are employed. In this context, we describe a VLE module that extends the support of the organization and delivery of course material by including administration activities related to the various stages of teaching. These include the co-ordination, collaboration and monitoring of the course material development process and institution-specific course material delivery modes. Our specialized module, which enhances VLE capabilities by Helping Educators and Learners through a Laboratory Assistance System, is willing to assist the Greek tertiary technological sector, which includes Technological Educational Institutes (T.E.I.).
Abstract: The purposes of this paper are to (1) promote excellence in computer science by suggesting a cohesive innovative approach to fill well documented deficiencies in current computer science education, (2) justify (using the authors' and others anecdotal evidence from both the classroom and the real world) why this approach holds great potential to successfully eliminate the deficiencies, (3) invite other professionals to join the authors in proof of concept research. The authors' experiences, though anecdotal, strongly suggest that a new approach involving visual modeling technologies should allow computer science programs to retain a greater percentage of prospective and declared majors as students become more engaged learners, more successful problem-solvers, and better prepared as programmers. In addition, the graduates of such computer science programs will make greater contributions to the profession as skilled problem-solvers. Instead of wearily rememorizing code as they move to the next course, students will have the problem-solving skills to think and work in more sophisticated and creative ways.
Abstract: The purpose of this study was to develop a “teachers’
self-efficacy scale for high school physical education teachers
(TSES-HSPET)” in Taiwan. This scale is based on the self-efficacy
theory of Bandura [1], [2]. This study used exploratory and
confirmatory factor analyses to test the reliability and validity. The
participants were high school physical education teachers in Taiwan.
Both stratified random sampling and cluster sampling were used to
sample participants for the study. 350 teachers were sampled in the
first stage and 234 valid scales (male 133, female 101) returned.
During the second stage, 350 teachers were sampled and 257 valid
scales (male 143, female 110, 4 did not indicate gender) returned. The
exploratory factor analysis was used in the first stage, and it got
60.77% of total variance for construct validity. The Cronbach’s alpha
coefficient of internal consistency was 0.91 for sumscale, and
subscales were 0.84 and 0.90. In the second stage, confirmatory factor
analysis was used to test construct validity. The result showed that the
fit index could be accepted (χ2 (75) =167.94, p
Abstract: This paper unifies power optimization approaches in
various energy converters, such as: thermal, solar, chemical, and
electrochemical engines, in particular fuel cells. Thermodynamics
leads to converter-s efficiency and limiting power. Efficiency
equations serve to solve problems of upgrading and downgrading of
resources. While optimization of steady systems applies the
differential calculus and Lagrange multipliers, dynamic optimization
involves variational calculus and dynamic programming. In reacting
systems chemical affinity constitutes a prevailing component of an
overall efficiency, thus the power is analyzed in terms of an active
part of chemical affinity. The main novelty of the present paper in the
energy yield context consists in showing that the generalized heat
flux Q (involving the traditional heat flux q plus the product of
temperature and the sum products of partial entropies and fluxes of
species) plays in complex cases (solar, chemical and electrochemical)
the same role as the traditional heat q in pure heat engines.
The presented methodology is also applied to power limits in fuel
cells as to systems which are electrochemical flow engines propelled
by chemical reactions. The performance of fuel cells is determined by
magnitudes and directions of participating streams and mechanism of
electric current generation. Voltage lowering below the reversible
voltage is a proper measure of cells imperfection. The voltage losses,
called polarization, include the contributions of three main sources:
activation, ohmic and concentration. Examples show power maxima
in fuel cells and prove the relevance of the extension of the thermal
machine theory to chemical and electrochemical systems. The main
novelty of the present paper in the FC context consists in introducing
an effective or reduced Gibbs free energy change between products p
and reactants s which take into account the decrease of voltage and
power caused by the incomplete conversion of the overall reaction.
Abstract: Internet computer games turn to be more and more
attractive within the context of technology enhanced learning.
Educational games as quizzes and quests have gained significant
success in appealing and motivating learners to study in a different
way and provoke steadily increasing interest in new methods of
application. Board games are specific group of games where figures
are manipulated in competitive play mode with race conditions on a
surface according predefined rules. The article represents a new,
formalized model of traditional quizzes, puzzles and quests shown as
multimedia board games which facilitates the construction process of
such games. Authors provide different examples of quizzes and their
models in order to demonstrate the model is quite general and does
support not only quizzes, mazes and quests but also any set of
teaching activities. The execution process of such models is
explained and, as well, how they can be useful for creation and
delivery of adaptive e-learning courseware.
Abstract: In this paper, we propose a novel limited feedback scheme for task planning with service robots. Instead of sending the full service robot state information for the task planning, the proposed scheme send the best-M indices of service robots with a indicator. With the indicator, the proposed scheme significantly reduces the communication overhead for task planning as well as mitigates the system performance degradation in terms of the utility. In addition, we analyze the system performance of the proposed scheme and compare the proposed scheme with the other schemes.
Abstract: The hydrolysis kinetics of polycrystalline lithium hydride (LiH) in argon at various low humidities was measured by gravimetry and Raman spectroscopy with ambient water concentration ranging from 200 to 1200 ppm. The results showed that LiH hydrolysis curve revealed a paralinear shape, which was attributed to two different reaction stages that forming different products as explained by the 'Layer Diffusion Control' model. Based on the model, a novel two-stage rate equation for LiH hydrolysis reactions was developed and used to fit the experimental data for determination of Li2O steady thickness Hs and the ultimate hydrolysis rate vs. The fitted data presented a rise of Hs as ambient water concentration cw increased. However, in spite of the negative effect imposed by Hs increasing, the upward trend of vs remained, which implied that water concentration, rather than Li2O thickness, played a predominant role in LiH hydrolysis kinetics. In addition, the proportional relationship between vsHs and cw predicted by rate equation and confirmed by gravimetric data validated the model in such conditions.
Abstract: The purpose of this paper is to present teacher candidates- beliefs about technology integration in their field of study, which is classroom teaching in this case. The study was conducted among the first year students in college of education in Turkey. This study is based on both quantitative and qualitative data. For the quantitative data- Likert scale was used and for the qualitative data pattern matching was employed. The primary findings showed that students defined educational technology as technologies that improve learning with their visual, easily accessible, and productive features. They also believe these technologies could affect their future students- learning positively.
Abstract: The major purpose of this study is to use network and multimedia technologies to build a game-based learning system for junior high school students to apply in learning “World Geography" through the “role-playing" game approaches. This study first investigated the motivation and habits of junior high school students to use the Internet and online games, and then designed a game-based learning system according to situated and game-based learning theories. A teaching experiment was conducted to analyze the learning effectiveness of students on the game-based learning system and the major factors affecting their learning. A questionnaire survey was used to understand the students- attitudes towards game-based learning. The results showed that the game-based learning system can enhance students- learning, but the gender of students and their habits in using the Internet have no significant impact on learning. Game experience has a significant impact on students- learning, and the higher the experience value the better the effectiveness of their learning. The results of questionnaire survey also revealed that the system can increase students- motivation and interest in learning "World Geography".
Abstract: This paper deals with the helical flow of a Newtonian
fluid in an infinite circular cylinder, due to both longitudinal and
rotational shear stress. The velocity field and the resulting shear
stress are determined by means of the Laplace and finite Hankel
transforms and satisfy all imposed initial and boundary conditions.
For large times, these solutions reduce to the well-known steady-state
solutions.
Abstract: In our modern world, more physical transactions are being substituted by electronic transactions (i.e. banking, shopping, and payments), many businesses and companies are performing most of their operations through the internet. Instead of having a physical commerce, internet visitors are now adapting to electronic commerce (e-Commerce). The ability of web users to reach products worldwide can be greatly benefited by creating friendly and personalized online business portals. Internet visitors will return to a particular website when they can find the information they need or want easily. Dealing with this human conceptualization brings the incorporation of Artificial/Computational Intelligence techniques in the creation of customized portals. From these techniques, Fuzzy-Set technologies can make many useful contributions to the development of such a human-centered endeavor as e-Commerce. The main objective of this paper is the implementation of a Paradigm for the Intelligent Design and Operation of Human-Computer interfaces. In particular, the paradigm is quite appropriate for the intelligent design and operation of software modules that display information (such Web Pages, graphic user interfaces GUIs, Multimedia modules) on a computer screen. The human conceptualization of the user personal information is analyzed throughout a Cascaded Fuzzy Inference (decision-making) System to generate the User Ascribe Qualities, which identify the user and that can be used to customize portals with proper Web links.
Abstract: This paper proposes a new optimization techniques
for the optimization a gas processing plant uncertain feed and
product flows. The problem is first formulated using a continuous
linear deterministic approach. Subsequently, the single and joint
chance constraint models for steady state process with timedependent
uncertainties have been developed. The solution approach
is based on converting the probabilistic problems into their
equivalent deterministic form and solved at different confidence
levels Case study for a real plant operation has been used to
effectively implement the proposed model. The optimization results
indicate that prior decision has to be made for in-operating plant
under uncertain feed and product flows by satisfying all the
constraints at 95% confidence level for single chance constrained and
85% confidence level for joint chance constrained optimizations
cases.
Abstract: Due to the emergence of “Humanized Healthcare"
introduced by Professor Dr. Prawase Wasi in 2003[1], the
development of this paradigm tends to be widely implemented. The
organizations included Healthcare Accreditation Institute (public
organization), National Health Foundation, Mahidol University in
cooperation with Thai Health Promotion Foundation, and National
Health Security Office (Thailand) have selected the hospitals or
infirmaries that are qualified for humanized healthcare since 2008-
2010 and 35 of them are chosen to be the outstandingly navigating
organizations for the development of humanized healthcare,
humanized healthcare award [2].
The research aims to study the current issue, characteristics and
patterns of hospital administration contributing to humanized
healthcare system in Thailand. The selected case studies are from
four hospitals including Dansai Crown Prince Hospital, Leoi;
Ubolrattana Hospital, Khon Kaen; Kapho Hospital, Pattani; and
Prathai Hospital, Nakhonrachasima. The methodology is in-depth
interviewing with 10 staffs working as hospital executive directors,
and representatives from leader groups including directors,
multidisciplinary hospital committees, personnel development
committees, physicians and nurses in each hospital. (Total=40) In
addition, focus group discussions between hospital staffs and general
people (including patients and their relatives, the community leader,
and other people) are held by means of setting 4 groups including 8
people within each group. (Total=128) The observation on the
working in each hospital is also implemented. The findings of the
study reveal that there are five important aspects found in each
hospital including (1) the quality improvement under the mental and
spiritual development policy from the chief executives and lead
teams, leaders as Role model and they have visionary leadership; (2)
the participation hospital administration system focusing on learning
process and stakeholder- needs, spiritual human resource
management and development; (3) the relationship among people
especially staffs, team work skills, mutual understanding, effective
communication and personal inner-development; (4) organization
culture relevant to the awareness of patients- rights as well as the
participation policy including spiritual growth achieving to the same
goals, sharing vision, developing public mind, and caring; and (5)
healing structures or environment providing warmth and convenience
for hospital staffs, patients and their relatives and visitors.
Abstract: A conjugate heat transfer for steady two-dimensional
mixed convection with magnetic hydrodynamic (MHD) flow of an
incompressible quiescent fluid over an unsteady thermal forming
stretching sheet has been studied. A parameter, M, which is used to
represent the dominance of the magnetic effect has been presented in
governing equations. The similar transformation and an implicit
finite-difference method have been used to analyze the present
problem. The numerical solutions of the flow velocity distributions,
temperature profiles, the wall unknown values of f''(0) and '(θ (0) for
calculating the heat transfer of the similar boundary-layer flow are
carried out as functions of the unsteadiness parameter (S), the Prandtl
number (Pr), the space-dependent parameter (A) and
temperature-dependent parameter (B) for heat source/sink and the
magnetic parameter (M). The effects of these parameters have also
discussed. At the results, it will produce greater heat transfer effect
with a larger Pr and M, S, A, B will reduce heat transfer effects. At
last, conjugate heat transfer for the free convection with a larger G has
a good heat transfer effect better than a smaller G=0.
Abstract: A numerical study has been carried out to investigate
the heat transfer by natural convection of nanofluid taking Cu as
nanoparticles and the water as based fluid in a three dimensional
annulus enclosure filled with porous media (silica sand) between two
horizontal concentric cylinders with 12 annular fins of 2.4mm
thickness attached to the inner cylinder under steady state conditions.
The governing equations which used are continuity, momentum and
energy equations under an assumptions used Darcy law and
Boussinesq-s approximation which are transformed to dimensionless
equations. The finite difference approach is used to obtain all the
computational results using the MATLAB-7. The parameters affected
on the system are modified Rayleigh number (10 ≤Ra*≤ 1000), fin
length Hf (3, 7 and 11mm), radius ratio Rr (0.293, 0.365 and 0.435)
and the volume fraction(0 ≤ ¤ò ≤ 0 .35). It was found that the
average Nusselt number depends on (Ra*, Hf, Rr and φ). The results
show that, increasing of fin length decreases the heat transfer rate and
for low values of Ra*, decreasing Rr cause to decrease Nu while for
Ra*
greater than 100, decreasing Rr cause to increase Nu and adding
Cu nanoparticles with 0.35 volume fraction cause 27.9%
enhancement in heat transfer. A correlation for Nu in terms of Ra*,
Hf and φ, has been developed for inner hot cylinder.
Abstract: The main mission of Ezilla is to provide a friendly
interface to access the virtual machine and quickly deploy the high
performance computing environment. Ezilla has been developed by
Pervasive Computing Team at National Center for High-performance
Computing (NCHC). Ezilla integrates the Cloud middleware,
virtualization technology, and Web-based Operating System (WebOS)
to form a virtual computer in distributed computing environment. In
order to upgrade the dataset and speedup, we proposed the sensor
observation system to deal with a huge amount of data in the
Cassandra database. The sensor observation system is based on the
Ezilla to store sensor raw data into distributed database. We adopt the
Ezilla Cloud service to create virtual machines and login into virtual
machine to deploy the sensor observation system. Integrating the
sensor observation system with Ezilla is to quickly deploy experiment
environment and access a huge amount of data with distributed
database that support the replication mechanism to protect the data
security.
Abstract: This paper aims to argue that religion and Faith-based
Organizations (FBOs) contribute to building democratic process
through the provision of education in Sierra Leone. Sierra Leone
experienced a civil war from 1991 to 2002 and about 70 percent of the
population lives in poverty. While the government has been in the
process of rebuilding the nation, many forms of Civil Society
Organizations (CSOs), including FBOs, have played a significant role
in promoting social development. Education plays an important role in
supporting people-s democratic movements through knowledge
acquisition, spiritual enlightenment and empowerment. This paper
discusses religious tolerance in Sierra Leone and how FBOs have
contributed to the provision of primary education in Sierra Leone. This
study is based on the author-s field research, which involved
interviews with teachers and development stakeholders, notably
government officials, Non-governmental Organizations (NGOs) and
FBOs, as well as questionnaires completed by pupils, parents and
teachers.