Evaluation of Linear and Geometrically Nonlinear Static and Dynamic Analysis of Thin Shells by Flat Shell Finite Elements

The choice of finite element to use in order to predict nonlinear static or dynamic response of complex structures becomes an important factor. Then, the main goal of this research work is to focus a study on the effect of the in-plane rotational degrees of freedom in linear and geometrically non linear static and dynamic analysis of thin shell structures by flat shell finite elements. In this purpose: First, simple triangular and quadrilateral flat shell finite elements are implemented in an incremental formulation based on the updated lagrangian corotational description for geometrically nonlinear analysis. The triangular element is a combination of DKT and CST elements, while the quadrilateral is a combination of DKQ and the bilinear quadrilateral membrane element. In both elements, the sixth degree of freedom is handled via introducing fictitious stiffness. Secondly, in the same code, the sixth degrees of freedom in these elements is handled differently where the in-plane rotational d.o.f is considered as an effective d.o.f in the in-plane filed interpolation. Our goal is to compare resulting shell elements. Third, the analysis is enlarged to dynamic linear analysis by direct integration using Newmark-s implicit method. Finally, the linear dynamic analysis is extended to geometrically nonlinear dynamic analysis where Newmark-s method is used to integrate equations of motion and the Newton-Raphson method is employed for iterating within each time step increment until equilibrium is achieved. The obtained results demonstrate the effectiveness and robustness of the interpolation of the in-plane rotational d.o.f. and present deficiencies of using fictitious stiffness in dynamic linear and nonlinear analysis.




References:
[1] J. L. Batoz, and M. Ben Tahar, "Evaluation of new Quadrilateral thin
plate bending element", International Journal For Numerical Methods
in Engineering, vol. 18, pp. 1655-1677, 1982.
[2] J. L. Batoz, and M. Ben Tahar, "A Study of three-node Triangular plate
bending element", International Journal For Numerical Methods in
Engineering, vol. 15, pp. 1771-1812, 1980.
[3] A. Ibrahimbegovic, R. L. Taylor, and E. L. Wilson, "A robust
quadrilateral membrane finite element with drilling degrees of freedom",
International Journal for Numerical Methods in Engineering, vol. 30,
pp. 445-457, 1990.
[4] O. C. Zienkiewicks, The finite element method, L Mc G H, Third
edition, 1977.
[5] P. K. Gotsis, "Structural optimization of shell structures", Computers
and Structures, vol. 50(4), pp. 499-507, 1994.
[6] Ph. Jetteur, "A shallow shell element with in-plane rotational degrees of
freedom", rapport interne, INRIA, 1986.
[7] P. Seshu, and V. Ramamurti, "Effect of fictitious rotational stiffness
coefficient on natural frequencies", Journal of Sound and Vibration, vol.
133(l), pp. 177-179, 1989.
[8] D. J. Allman, "A compatible triangular element including vertex
rotations for plane elasticity analysis", Computers and Structures, vol.
19, pp. 1-8, 1984.
[9] D. Cook, "On the Allman triangle and a related quadrilateral element",
Computers and Structures, vol. 22, pp. 1065-1067, 1986.
[10] T. J. R. Hughes, and F. Brezzi, "On drilling degrees of freedom",
Computer Methods in Applied Mechanics and Engineering, vol. 72, pp.
105-121, 1989.
[11] D. Boutagouga, A. Gouasmia, and K. Djeghaba, "geometrically non
linear analysis of thin shell by a quadrilateral finite element with inplane
rotational degrees of freedom", European Journal of
Computational Mechanics, vol. 19(8), pp. 707-724, 2010.
[12] M. A. Dokainish, and K. Subbaraj, "A survey of direct time-integration
methods in computational structural dynamics- I. explicit methods",
Computers and Structures.vol. 32(6), pp. 1371-1386, 1989.
[13] K. Subbaraj, and M. A. Dokainish, "A survey of direct tome-integration
methods in computational structural dynamics- II. implicit methods",
Computers and Structures,vol. 32(6), pp. 1387-1401, 1989.
[14] C. W. Bert, and J. D. Stricklin, "Comparative evaluation of six different
numerical integration methods for non-linear dynamic systems". Journal
of Sound and Vibration, vol. 127(2), pp. 221-229, 1988.
[15] K. S. Surana, "Geometrically nonlinear formulation for the curved shell
elements", International Journal for Numerical Methods in Engineering,
vol. 19, pp. 581-615, 1983.
[16] E. Ramm, "The Riks/Wempner approach - An extension of the
displacement control method in non linear analyses", Recent Advances
in nonlinear Computational Mechanics, university of Swansea, England,
pp. 63-89, 1982.
[17] J. L. Meek, and Y. Wang, "Nonlinear static and dynamic analysis of
shell structures with finite rotation", Computer Methods in Applied
Mechanics and Engineering, vol. 162, pp. 301-315, 1998.