Abstract: In the urban traffic network, the intersections are the
“bottleneck point" of road network capacity. And the arterials are the
main body in road network and the key factor which guarantees the
normal operation of the city-s social and economic activities. The
rapid increase in vehicles leads to seriously traffic jam and cause the
increment of vehicles- delay. Most cities of our country are
traditional single control system, which cannot meet the need for the
city traffic any longer. In this paper, Synchro6.0 as a platform to
minimize the intersection delay, optimizesingle signal cycle and split
for Zhonghua Street in Handan City. Meanwhile, linear control
system uses to optimize the phase for the t arterial road in this
system. Comparing before and after use the control, capacities and
service levels of this road and the adjacent road have improved
significantly.
Abstract: This paper proposes a prototype of a lower-limb
rehabilitation system for recovering and strengthening patients-
injured lower limbs. The system is composed of traction motors for
each leg position, a treadmill as a walking base, tension sensors,
microcontrollers controlling motor functions and a main system with
graphic user interface. For derivation of reference or normal velocity
profiles of the body segment point, kinematic method is applied based
on the humanoid robot model using the reference joint angle data of
normal walking.
Abstract: In this paper, the discrete-time fuzzy BAM neural network with delays and impulses is studied. Sufficient conditions are obtained for the existence and global stability of a unique equilibrium of this class of fuzzy BAM neural networks with Lipschitzian activation functions without assuming their boundedness, monotonicity or differentiability and subjected to impulsive state displacements at fixed instants of time. Some numerical examples are given to demonstrate the effectiveness of the obtained results.
Abstract: How to coordinate the behaviors of the agents through
learning is a challenging problem within multi-agent domains.
Because of its complexity, recent work has focused on how
coordinated strategies can be learned. Here we are interested in using
reinforcement learning techniques to learn the coordinated actions of a
group of agents, without requiring explicit communication among
them. However, traditional reinforcement learning methods are based
on the assumption that the environment can be modeled as Markov
Decision Process, which usually cannot be satisfied when multiple
agents coexist in the same environment. Moreover, to effectively
coordinate each agent-s behavior so as to achieve the goal, it-s
necessary to augment the state of each agent with the information
about other existing agents. Whereas, as the number of agents in a
multiagent environment increases, the state space of each agent grows
exponentially, which will cause the combinational explosion problem.
Profit sharing is one of the reinforcement learning methods that allow
agents to learn effective behaviors from their experiences even within
non-Markovian environments. In this paper, to remedy the drawback
of the original profit sharing approach that needs much memory to
store each state-action pair during the learning process, we firstly
address a kind of on-line rational profit sharing algorithm. Then, we
integrate the advantages of modular learning architecture with on-line
rational profit sharing algorithm, and propose a new modular
reinforcement learning model. The effectiveness of the technique is
demonstrated using the pursuit problem.
Abstract: A microchannel with two inlets and two outlets was tested as a potential reactor to carry out two-phase catalytic phase transfer reaction with phase separation at the exit of the microchannel. The catalytic phase transfer reaction between benzyl chloride and sodium sulfide was chosen as a model reaction. The effect of operational time on the conversion was studied. By utilizing a multiphase parallel flow inside the microchannel reactor with the aid of a guideline structure, the catalytic phase reaction followed by phase separation could be ensured. The organic phase could be separated completely from one exit and part of the aqueous phase was separated purely and could be reused with slightly affecting the catalytic phase transfer reaction.
Abstract: Long Term Evolution (LTE) is a 4G wireless
broadband technology developed by the Third Generation
Partnership Project (3GPP) release 8, and it's represent the
competitiveness of Universal Mobile Telecommunications System
(UMTS) for the next 10 years and beyond. The concepts for LTE
systems have been introduced in 3GPP release 8, with objective of
high-data-rate, low-latency and packet-optimized radio access
technology. In this paper, performance of different TCP variants
during LTE network investigated. The performance of TCP over
LTE is affected mostly by the links of the wired network and total
bandwidth available at the serving base station. This paper describes
an NS-2 based simulation analysis of TCP-Vegas, TCP-Tahoe, TCPReno,
TCP-Newreno, TCP-SACK, and TCP-FACK, with full
modeling of all traffics of LTE system. The Evaluation of the
network performance with all TCP variants is mainly based on
throughput, average delay and lost packet. The analysis of TCP
performance over LTE ensures that all TCP's have a similar
throughput and the best performance return to TCP-Vegas than other
variants.
Abstract: IT infrastructures are becoming more and more
difficult. Therefore, in the first industrial IT systems, the P2P
paradigm has replaced the traditional client server and methods of
self-organization are gaining more and more importance. From the
past it is known that especially regular structures like grids may
significantly improve the system behavior and performance. This
contribution introduces a new algorithm based on a biologic
analogue, which may provide the growth of several regular structures
on top of anarchic grown P2P- or social network structures.
Abstract: The design problem of Infinite Impulse Response (IIR)
digital filters is usually expressed as the minimization problem of
the complex magnitude error that includes both the magnitude and
phase information. However, the group delay of the filter obtained
by solving such design problem may be far from the desired group
delay. In this paper, we propose a design method of stable IIR digital
filters with prespecified maximum group delay errors. In the proposed
method, the approximation problems of the magnitude-phase and
group delay are separately defined, and these two approximation
problems are alternately solved using successive projections. As a
result, the proposed method can design the IIR filters that satisfy the
prespecified allowable errors for not only the complex magnitude but
also the group delay by alternately executing the coefficient update
for the magnitude-phase and the group delay approximation. The
usefulness of the proposed method is verified through some examples.
Abstract: Obtaining labeled data in supervised learning is often
difficult and expensive, and thus the trained learning algorithm tends
to be overfitting due to small number of training data. As a result,
some researchers have focused on using unlabeled data which may
not necessary to follow the same generative distribution as the labeled
data to construct a high-level feature for improving performance on
supervised learning tasks. In this paper, we investigate the impact of
the relationship between unlabeled and labeled data for classification
performance. Specifically, we will apply difference unlabeled data
which have different degrees of relation to the labeled data for
handwritten digit classification task based on MNIST dataset. Our
experimental results show that the higher the degree of relation
between unlabeled and labeled data, the better the classification
performance. Although the unlabeled data that is completely from
different generative distribution to the labeled data provides the lowest
classification performance, we still achieve high classification performance.
This leads to expanding the applicability of the supervised
learning algorithms using unsupervised learning.
Abstract: Analysis of the elastic scattering of protons on 6,7Li
nuclei has been done in the framework of the optical model at the
beam energies up to 50 MeV. Differential cross sections for the 6,7Li +
p scattering were measured over the proton laboratory–energy range
from 400 to 1050 keV. The elastic scattering of 6,7Li+p data at
different proton incident energies have been analyzed using singlefolding
model. In each case the real potential obtained from the
folding model was supplemented by a phenomenological imaginary
potential, and during the fitting process the real potential was
normalized and the imaginary potential optimized. Normalization
factor NR is calculated in the range between 0.70 and 0.84.
Abstract: Gene expression profiling is rapidly evolving into a
powerful technique for investigating tumor malignancies. The
researchers are overwhelmed with the microarray-based platforms
and methods that confer them the freedom to conduct large-scale
gene expression profiling measurements. Simultaneously,
investigations into cross-platform integration methods have started
gaining momentum due to their underlying potential to help
comprehend a myriad of broad biological issues in tumor diagnosis,
prognosis, and therapy. However, comparing results from different
platforms remains to be a challenging task as various inherent
technical differences exist between the microarray platforms. In this
paper, we explain a simple ratio-transformation method, which can
provide some common ground for cDNA and Affymetrix platform
towards cross-platform integration. The method is based on the
characteristic data attributes of Affymetrix- and cDNA- platform. In
the work, we considered seven childhood leukemia patients and their
gene expression levels in either platform. With a dataset of 822
differentially expressed genes from both these platforms, we carried
out a specific ratio-treatment to Affymetrix data, which subsequently
showed an improvement in the relationship with the cDNA data.
Abstract: Herein, we report the different types of surface morphology due to the interaction between the pure protein Insulin (INS) and catanionic surfactant mixture of Sodium Dodecyl Sulfate (SDS) and Cetyl Trimethyl Ammonium Bromide (CTAB) at air/water interface obtained by the Langmuir-Blodgett (LB) technique. We characterized the aggregations by Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR) in LB films. We found that the INS adsorption increased in presence of catanionic surfactant at air/water interface. The presence of small amount of surfactant induces two-stage growth kinetics due to the pure protein absorption and protein-catanionic surface micelle interaction. The protein remains in native state in presence of small amount of surfactant mixture. Smaller amount of surfactant mixture with INS is producing surface micelle type structure. This may be considered for drug delivery system. On the other hand, INS becomes unfolded and fibrillated in presence of higher amount of surfactant mixture. In both the cases, the protein was successfully immobilized on a glass substrate by the LB technique. These results may find applications in the fundamental science of the physical chemistry of surfactant systems, as well as in the preparation of drug-delivery system.
Abstract: In this paper a modification on Levenberg-Marquardt algorithm for MLP neural network learning is proposed. The proposed algorithm has good convergence. This method reduces the amount of oscillation in learning procedure. An example is given to show usefulness of this method. Finally a simulation verifies the results of proposed method.
Abstract: Efficient preprocessing is very essential for automatic
recognition of handwritten documents. In this paper, techniques on
segmenting words in handwritten Arabic text are presented. Firstly,
connected components (ccs) are extracted, and distances among
different components are analyzed. The statistical distribution of this
distance is then obtained to determine an optimal threshold for words
segmentation. Meanwhile, an improved projection based method is
also employed for baseline detection. The proposed method has been
successfully tested on IFN/ENIT database consisting of 26459
Arabic words handwritten by 411 different writers, and the results
were promising and very encouraging in more accurate detection of
the baseline and segmentation of words for further recognition.
Abstract: With the development of virtual communities, there is
an increase in the number of members in Virtual Communities (VCs).
Many join VCs with the objective of sharing their knowledge and
seeking knowledge from others. Despite the eagerness of sharing
knowledge and receiving knowledge through VCs, there is no
standard of assessing ones knowledge sharing capabilities and
prospects of knowledge sharing. This paper developed a vector space
model to assess the knowledge sharing prospect of VC users.
Abstract: This paper presents key challenges reported by a
group of Australian undergraduate Physical Education students in
conducting a program for persons with an intellectual disability.
Strategies adopted to address these challenges are presented together
with representative feedback given by the Physical Education
students at the completion of the program. The significance of the
program’s findings is summarized.
Abstract: It is well known that a linear dynamic system including
a delay will exhibit limit cycle oscillations when a bang-bang sensor
is used in the feedback loop of a PID controller. A similar behaviour
occurs when a delayed feedback signal is used to train a neural
network. This paper develops a method of predicting this behaviour
by linearizing the system, which can be shown to behave in a manner
similar to an integral controller. Using this procedure, it is possible
to predict the characteristics of the neural network driven limit cycle
to varying degrees of accuracy, depending on the information known
about the system. An application is also presented: the intelligent
control of a spark ignition engine.
Abstract: In modern telecommunications industry, demand &
supply chain management (DSCM) needs reliable design and
versatile tools to control the material flow. The objective for efficient
DSCM is reducing inventory, lead times and related costs in order to
assure reliable and on-time deliveries from manufacturing units
towards customers. In this paper the multi-rate expert system based
methodology for developing simulation tools that would enable
optimal DSCM for multi region, high volume and high complexity
manufacturing environment was proposed.
Abstract: In recent years, IT convergence technology has been developed to get creative solution by combining robotics or sports science technology. Object detection and recognition have mainly applied to sports science field that has processed by recognizing face and by tracking human body. But object detection and recognition using vision sensor is challenge task in real world because of illumination. In this paper, object detection and recognition using vision sensor applied to sports simulator has been introduced. Face recognition has been processed to identify user and to update automatically a person athletic recording. Human body has tracked to offer a most accurate way of riding horse simulator. Combined image processing has been processed to reduce illumination adverse affect because illumination has caused low performance in detection and recognition in real world application filed. Face has recognized using standard face graph and human body has tracked using pose model, which has composed of feature nodes generated diverse face and pose images. Face recognition using Gabor wavelet and pose recognition using pose graph is robust to real application. We have simulated using ETRI database, which has constructed on horse riding simulator.
Abstract: There are many kinds of metal borates found not only
in nature but also synthesized in the laboratory such as magnesium
borates. Due to its excellent properties, as remarkable ceramic
materials, they have also application areas in anti-wear and friction
reducing additives as well as electro-conductive treating agents. The
synthesis of magnesium borate powders can be fulfilled simply with
two different methods, hydrothermal and thermal synthesis.
Microwave assisted method, also another way of producing
magnesium borate, can be classified into thermal synthesis because of
using the principles of solid state synthesis. It also contributes
producing particles with small size and high purity in nano-size
material synthesize. In this study the production of magnesium
borates, are aimed using MgCl2.6H2O and H3BO3. The identification
of both starting materials and products were made by the equipments
of, X-Ray Diffraction (XRD) and Fourier Transform Infrared
Spectroscopy (FT-IR). After several synthesis steps magnesium
borates were synthesized and characterized by XRD and FT-IR, as
well.