Abstract: As increasing importance of symbiosis and cooperation among mobile communication industries, the mobile ecosystem has been especially highlighted in academia and practice. The structure of mobile ecosystem is quite complex and the ecological role of actors is important to understand that structure. In this respect, this study aims to explore structure of mobile ecosystem in the case of Korea using inter-industry network analysis. Then, the ecological roles in mobile ecosystem are identified using centrality measures as a result of network analysis: degree of centrality, closeness, and betweenness. The result shows that the manufacturing and service industries are separate. Also, the ecological roles of some actors are identified based on the characteristics of ecological terms: keystone, niche, and dominator. Based on the result of this paper, we expect that the policy makers can formulate the future of mobile industry and healthier mobile ecosystem can be constructed.
Abstract: Trauma in early life is widely regarded as a cause for
adult mental health problems. This study explores the role of
secondary trauma on later functioning in a sample of 359 university
students enrolled in undergraduate psychology classes in the United
States. Participants were initially divided into four groups based on
1) having directly experienced trauma (assaultive violence), 2)
having directly experienced trauma and secondary traumatization
through the unanticipated death of a close friend or family member
or witnessing of an injury or shocking even), 3) having no
experience of direct trauma but having experienced indirect trauma
(secondary trauma), or 4) reporting no exposure. Participants
completed a battery of measures on concepts associated with
psychological functioning which included measures of
psychological well-being, problem solving, coping and resiliency.
Findings discuss differences in psychological functioning and
resilience based on participants who experienced secondary
traumatization and assaultive violence versus secondary
traumatization alone.
Abstract: Palm oil could be converted to cocoa butter equivalent by lipase-catalyzed interesterification. The objective of this research was to investigate the structure modification of palm oil to cocoa butter equivalent using Carica papaya lipase –catalyzed interesterification. The study showed that the compositions of cocoa butter equivalent were affected by acyl donor sources, substrate ratio, initial water of enzyme, reaction time, reaction temperature and the amount of enzyme. Among three acyl donors tested (methyl stearate, ethyl stearate and stearic acid), methyl stearate appeared to be the best acyl donor for incorporation to palm oil structure. The best reaction conditions for cocoa butter equivalent production were : substrate ratio (palm oil : methyl stearate, mol/mol) at 1 : 4, water activity of enzyme at 0.11, reaction time at 4 h, reaction temperature at 45 ° C and 18% by weight of the enzyme. The chemical and physical properties of cocoa butter equivalent were 9.75 ± 0.41% free fatty acid, 44.89 ± 0.84 iodine number, 193.19 ± 0.78 sponification value and melting point at 37-39 °C.
Abstract: The common practice of operating S-rotor is in an
open environment; however there are times when the rotor is
installed in a bounded environment and there might be changes in the
performance of the rotor. This paper presents the changes in the
performance of S-rotor when operated in bounded flows. The
investigation was conducted experimentally to compare the
performance of the rotors in bounded environment against open
environment. Three different rotors models were designed, fabricated
and subjected to experimental measurements. All of the three models
were having 600 mm height and 300 mm Diameter. They were tested
in three different flow environments; namely: partially bounded
environment, fully bounded environment and open environment.
Rotors were found to have better starting up capabilities when
operated in bounded environment. Apart from that, all rotors manage
to achieve higher Power and Torque Coefficients at a higher Tip
Speed Ratio as compared to the open environment.
Abstract: An ethical mandate of the social work profession in the
United States is that BSW and MSW graduates are sufficiently
prepared to both understand diverse cultural values and beliefs and
offer services that are culturally sensitive and relevant to clients. This
skill set is particularly important for social workers in the 21st Century,
given the increasing globalization of the U.S. and world. The purpose
of this paper is to outline a pedagogical model for teaching cultural
competency that resulted in a significant increase in cultural
competency for MSW graduates at Western Kentucky University
(WKU). More specifically, this model is predicated on five specific
culturally sensitive principles and activities that were found to be
highly effective in conveying culturally relevant knowledge and skills
to MSW students at WKU. Future studies can assess the effectiveness
of these principles in other MSW programs across the U.S. and abroad.
Abstract: The disaster from functional gastrointestinal disorders has detrimental impact on the quality of life of the effected population and imposes a tremendous social and economic burden. There are, however, rare diagnostic methods for the functional gastrointestinal disorders. Our research group identified recently that the gastrointestinal tract well in the patients with the functional gastrointestinal disorders becomes more rigid than healthy people when palpating the abdominal regions overlaying the gastrointestinal tract. Objective of current study is, therefore, identify feasibility of a diagnostic system for the functional gastrointestinal disorders based on ultrasound technique, which can quantify the characteristics above. Two-dimensional finite difference (FD) models (one normal and two rigid model) were developed to analyze the reflective characteristic (displacement) on each soft-tissue layer responded after application of ultrasound signals. The FD analysis was then based on elastic ultrasound theory. Validation of the model was performed via comparison of the characteristic of the ultrasonic responses predicted by FD analysis with that determined from the actual specimens for the normal and rigid conditions. Based on the results from FD analysis, ultrasound system for diagnosis of the functional gastrointestinal disorders was developed and clinically tested via application of it to 40 human subjects with/without functional gastrointestinal disorders who were assigned to Normal and Patient Groups. The FD models were favorably validated. The results from FD analysis showed that the maximum displacement amplitude in the rigid models (0.12 and 0.16) at the interface between the fat and muscle layers was explicitly less than that in the normal model (0.29). The results from actual specimens showed that the maximum amplitude of the ultrasonic reflective signal in the rigid models (0.2±0.1Vp-p) at the interface between the fat and muscle layers was explicitly higher than that in the normal model (0.1±0.2 Vp-p). Clinical tests using our customized ultrasound system showed that the maximum amplitudes of the ultrasonic reflective signals near to the gastrointestinal tract well for the patient group (2.6±0.3 Vp-p) were generally higher than those in normal group (0.1±0.2 Vp-p). Here, maximum reflective signals was appeared at 20mm depth approximately from abdominal skin for all human subjects, corresponding to the location of the boundary layer close to gastrointestinal tract well. These findings suggest that our customized ultrasound system using the ultrasonic reflective signal may be helpful to the diagnosis of the functional gastrointestinal disorders.
Abstract: This paper presents a novel approach to assessing textile porosity by the application of the image analysis techniques. The images of different types of sample fabrics, taken through a microscope when the fabric is placed over a constant light source,transfer the problem into the image analysis domain. Indeed, porosity can thus be expressed in terms of a brightness percentage index calculated on the digital microscope image. Furthermore, it is meaningful to compare the brightness percentage index with the air permeability and the tightness indices of each fabric type. We have experimentally shown that there exists an approximately linear relation between brightness percentage and air permeability indices.
Abstract: Routing in mobile ad hoc networks is a challenging task because nodes are free to move randomly. In DSR like all On- Demand routing algorithms, route discovery mechanism is associated with great delay. More Clearly in DSR routing protocol to send route reply packet, when current route breaks, destination seeks a new route. In this paper we try to change route selection mechanism proactively. We also define a link stability parameter in which a stability value is assigned to each link. Given this feature, destination node can estimate stability of routes and can select the best and more stable route. Therefore we can reduce the delay and jitter of sending data packets.
Abstract: In the package design industry, there are a lot of tacit knowledge resided within each designer. The objectives are to capture them and compile it to be used as a teaching resource and to create a video clip of package design process as well as to evaluate its quality and learning effectiveness. Interview were used as a technique for capturing knowledge in brand design concept, differentiation, recognition, rank of recognition factor, consumer survey, knowledge about marketing, research, graphic design, the effect of color, and law and regulation. Video clip about package design were created. The clip consisted of both the speech and clip of actual process. The quality of the video in term of media was ranked as good while the content was ranked as excellent. The students- score on post-test was significantly greater than that of pretest (p>0.001).
Abstract: Intelligent tutoring systems constitute an evolution of computer-aided educational software. We present here the modules of an intelligent tutoring system for Automatic Control, developed in our department. Through the software application developed,students can perform complete automatic control laboratory experiments, either over the departmental local area network or over the Internet. Monitoring of access to the system (local as well as international), along with student performance statistics, has yielded strongly encouraging results (as of fall 2004), despite the advanced technical content of the presented paradigm, thus showing the potential of the system developed for education and for training.
Abstract: Developing a nation geared by the principle of
sustainable development has been one of the piers in moulding a
greater nation for Malaysia since its independence. This is seen by
the act of joining the United Nations in 1957, just a month after
gaining their independence. The United Nations is an international
organization that aims to unite the nations worldwide based on
justice, human dignity and human well-being. Malaysia has
established a local body called the United Nations Malaysia which
collaborates with the government to accomplish the aim of
supporting sustainable development in Malaysia. Agenda 21 is an
international document produced from the Earth Summit providing
guidelines of implementing sustainable development globally,
nationally and locally. Initiatives of applying Agenda 21 in Malaysia
have been taken by the government and non-profit organizations to
expose issues regarding sustainable development and providing
environmental education to the community to increase awareness
towards environmental protection.
Abstract: Number Link is a Japanese logic puzzle where pairs of same numbers are connected using lines. Number Link can be regarded as a dynamic multiple travelers, multiple entries and exits maze, where the walls and passages are dynamically changing as the travelers move. In this paper, we apply the Tremaux’s algorithm to solve Number Link puzzles of size 8x8, 10x10 and 15x20. The algorithm works well and produces a solution for puzzles of size 8x8 and 10x10. However, solving a puzzle of size 15x20 requires high computer processing power and is time consuming.
Abstract: Measures of complexity and entropy have not converged to a single quantitative description of levels of organization of complex systems. The need for such a measure is increasingly necessary in all disciplines studying complex systems. To address this problem, starting from the most fundamental principle in Physics, here a new measure for quantity of organization and rate of self-organization in complex systems based on the principle of least (stationary) action is applied to a model system - the central processing unit (CPU) of computers. The quantity of organization for several generations of CPUs shows a double exponential rate of change of organization with time. The exact functional dependence has a fine, S-shaped structure, revealing some of the mechanisms of self-organization. The principle of least action helps to explain the mechanism of increase of organization through quantity accumulation and constraint and curvature minimization with an attractor, the least average sum of actions of all elements and for all motions. This approach can help describe, quantify, measure, manage, design and predict future behavior of complex systems to achieve the highest rates of self organization to improve their quality. It can be applied to other complex systems from Physics, Chemistry, Biology, Ecology, Economics, Cities, network theory and others where complex systems are present.
Abstract: A new method, based on the normal shrink and
modified version of Katssagelous and Lay, is proposed for multiscale
blind image restoration. The method deals with the noise and blur in
the images. It is shown that the normal shrink gives the highest S/N
(signal to noise ratio) for image denoising process. The multiscale
blind image restoration is divided in two sections. The first part of
this paper proposes normal shrink for image denoising and the
second part of paper proposes modified version of katssagelous and
Lay for blur estimation and the combination of both methods to reach
a multiscale blind image restoration.
Abstract: In this study, we consider a special situation that only a pair of hydrophone on a moving underwater vehicle is available to localize a fixed acoustic source of far distance. The trigonometry can be used in this situation by using two different DOA of different locations. Notice that the distance between the two locations should be measured. Therefore, we assume that the vehicle is sailing straightly and the moving distance for each unit time is measured continuously. However, the accuracy of the localization using the trigonometry is highly dependent to the accuracy of DOAs and measured moving distances. Therefore, we proposed another method based on the extended Kalman filter that gives more robust and accurate localization result.
Abstract: FlexRay, as a communication protocol for automotive
control systems, is developed to fulfill the increasing demand on the
electronic control units for implementing systems with higher safety
and more comfort. In this work, we study the impact of
radiation-induced soft errors on FlexRay-based steer-by-wire system.
We injected the soft errors into general purpose register set of FlexRay
nodes to identify the most critical registers, the failure modes of the
steer-by-wire system, and measure the probability distribution of
failure modes when an error occurs in the register file.
Abstract: Surface sediment samples were collected from the
Canon River mouth, Taiwan and analyzed for polycyclic aromatic
hydrocarbons (PAHs). Total PAHs concentrations varied from 337 to
1,252 ng/g dry weight, with a mean concentration of 827 ng/g dry
weight. The spatial distribution of PAHs reveals that the PAHs
concentration is relatively high in the river mouth region, and
gradually diminishes toward the harbor region. Diagnostic ratios
showed that the possible source of PAHs in the Canon River mouth
could be petroleum combustion. The toxic equivalent concentrations
(TEQcarc) of PAHs varied from 47 to 112 ng TEQ/g dry weight. Higher
total TEQcarc values were found in the river mouth region. As
compared with the US Sediment Quality Guidelines (SQGs), the
observed levels of PAHs at Canon River mouth were lower than the
effects range low (ERL), and would probably not exert adverse
biological effects.
Abstract: The impact force of a rockfall is mainly determined by
its moving behavior and velocity, which are contingent on the rock
shape, slope gradient, height, and surface roughness of the moving
path. It is essential to precisely calculate the moving path of the
rockfall in order to effectively minimize and prevent damages caused
by the rockfall. By applying the Colorado Rockfall Simulation
Program (CRSP) program as the analysis tool, this research studies the
influence of three shapes of rock (spherical, cylindrical and discoidal)
and surface roughness on the moving path of a single rockfall. As
revealed in the analysis, in addition to the slope gradient, the geometry
of the falling rock and joint roughness coefficient ( JRC ) of the slope
are the main factors affecting the moving behavior of a rockfall. On a
single flat slope, both the rock-s bounce height and moving velocity
increase as the surface gradient increases, with a critical gradient value
of 1:m = 1 . Bouncing behavior and faster moving velocity occur more
easily when the rock geometry is more oval. A flat piece tends to cause
sliding behavior and is easily influenced by the change of surface
undulation. When JRC
Abstract: The problem of robust fuzzy control for a class of
nonlinear fuzzy impulsive singular perturbed systems with
time-varying delay is investigated by employing Lyapunov functions.
The nonlinear delay system is built based on the well-known T–S
fuzzy model. The so-called parallel distributed compensation idea is
employed to design the state feedback controller. Sufficient conditions
for global exponential stability of the closed-loop system are derived
in terms of linear matrix inequalities (LMIs), which can be easily
solved by LMI technique. Some simulations illustrate the effectiveness
of the proposed method.
Abstract: Brassinosteroids (BRs) regulate cell elongation,
vascular differentiation, senescence, and stress responses. BRs signal
through the BES1/BZR1 family of transcription factors, which
regulate hundreds of target genes involved in this pathway. In this
research a comprehensive genome-wide analysis was carried out in
BES1/BZR1 gene family in Arabidopsis thaliana, Cucumis sativus,
Vitis vinifera, Glycin max and Brachypodium distachyon.
Specifications of the desired sequences, dot plot and hydropathy plot
were analyzed in the protein and genome sequences of five plant
species. The maximum amino acid length was attributed to protein
sequence Brdic3g with 374aa and the minimum amino acid length
was attributed to protein sequence Gm7g with 163aa. The maximum
Instability index was attributed to protein sequence AT1G19350
equal with 79.99 and the minimum Instability index was attributed to
protein sequence Gm5g equal with 33.22. Aliphatic index of these
protein sequences ranged from 47.82 to 78.79 in Arabidopsis
thaliana, 49.91 to 57.50 in Vitis vinifera, 55.09 to 82.43 in Glycin
max, 54.09 to 54.28 in Brachypodium distachyon 55.36 to 56.83 in
Cucumis sativus. Overall, data obtained from our investigation
contributes a better understanding of the complexity of the
BES1/BZR1 gene family and provides the first step towards directing
future experimental designs to perform systematic analysis of the
functions of the BES1/BZR1 gene family.