Abstract: Decision support systems are usually based on
multidimensional structures which use the concept of hypercube.
Dimensions are the axes on which facts are analyzed and form a
space where a fact is located by a set of coordinates at the
intersections of members of dimensions. Conventional
multidimensional structures deal with discrete facts linked to discrete
dimensions. However, when dealing with natural continuous
phenomena the discrete representation is not adequate. There is a
need to integrate spatiotemporal continuity within multidimensional
structures to enable analysis and exploration of continuous field data.
Research issues that lead to the integration of spatiotemporal
continuity in multidimensional structures are numerous. In this paper,
we discuss research issues related to the integration of continuity in
multidimensional structures, present briefly a multidimensional
model for continuous field data. We also define new aggregation
operations. The model and the associated operations and measures
are validated by a prototype.
Abstract: In this paper, an automatic control system design
based on Integral Squared Error (ISE) parameter optimization
technique has been implemented on longitudinal flight dynamics of
an UAV. It has been aimed to minimize the error function between
the reference signal and the output of the plant. In the following
parts, objective function has been defined with respect to error
dynamics. An unconstrained optimization problem has been solved
analytically by using necessary and sufficient conditions of
optimality, optimum PID parameters have been obtained and
implemented in control system dynamics.
Abstract: The recent trend in field oriented control (FOC) is towards the use of sensorless techniques that avoid the use of speed sensor and flux sensor. Sensors are replaced by estimators or observers to minimise the cost and increase the reliability. In this paper an anlyse of perfomance of a MRAS used in sensorless control of induction motors and sensitvity to machine parameters change are studied.
Abstract: This paper presents an Extended Kaman Filter
implementation of a single-camera Visual Simultaneous Localization
and Mapping algorithm, a novel algorithm for simultaneous
localization and mapping problem widely studied in mobile robotics
field. The algorithm is vision and odometry-based, The odometry
data is incremental, and therefore it will accumulate error over time,
since the robot may slip or may be lifted, consequently if the
odometry is used alone we can not accurately estimate the robot
position, in this paper we show that a combination of odometry and
visual landmark via the extended Kalman filter can improve the robot
position estimate. We use a Pioneer II robot and motorized pan tilt
camera models to implement the algorithm.
Abstract: A new dynamic clustering approach (DCPSO), based
on Particle Swarm Optimization, is proposed. This approach is
applied to unsupervised image classification. The proposed approach
automatically determines the "optimum" number of clusters and
simultaneously clusters the data set with minimal user interference.
The algorithm starts by partitioning the data set into a relatively large
number of clusters to reduce the effects of initial conditions. Using
binary particle swarm optimization the "best" number of clusters is
selected. The centers of the chosen clusters is then refined via the Kmeans
clustering algorithm. The experiments conducted show that
the proposed approach generally found the "optimum" number of
clusters on the tested images.
Abstract: This paper presents a comparison between two Pulse
Width Modulation (PWM) algorithms applied to a three-level Neutral
Point Clamped (NPC) Voltage Source Inverter (VSI). The first
algorithm applied is the triangular-sinusoidal strategy; the second is
the Space Vector Pulse Width Modulation (SVPWM) strategy. In the
first part, we present a topology of three-level NCP VSI. After that,
we develop the two PWM strategies to control this converter. At the
end the experimental results are presented.
Abstract: The typical coupled-tanks process that is TITO
plant has the difficulty in controller design because changing
of system dynamics and interacting of process. This paper
presents design methodology of auto-adjustable PI controller
using MRAC technique. The proposed method can adjust the
controller parameters in response to changes in plant and
disturbance real time by referring to the reference model that
specifies properties of the desired control system.
Abstract: The authors present optimization parameters of rotary
positioner controller in hard disk drive servo track writing process
using coefficient diagram method; CDM. Due to estimation
parameters in PI Positioning Control System by expected ratio
method cannot meet the required specification of response
effectively, we suggest coefficient diagram method for defining
controller parameters under the requirement of the system. Finally,
the simulation results show that our proposed method can improve
the problem in tuning parameter of rotary positioner controller. It is
satisfied specification of performance of control system. Furthermore,
it is very convenient as a fast adjustment damping ratio as well as a
high speed response.
Abstract: Fault-proneness of a software module is the
probability that the module contains faults. To predict faultproneness
of modules different techniques have been proposed which
includes statistical methods, machine learning techniques, neural
network techniques and clustering techniques. The aim of proposed
study is to explore whether metrics available in the early lifecycle
(i.e. requirement metrics), metrics available in the late lifecycle (i.e.
code metrics) and metrics available in the early lifecycle (i.e.
requirement metrics) combined with metrics available in the late
lifecycle (i.e. code metrics) can be used to identify fault prone
modules using Genetic Algorithm technique. This approach has been
tested with real time defect C Programming language datasets of
NASA software projects. The results show that the fusion of
requirement and code metric is the best prediction model for
detecting the faults as compared with commonly used code based
model.
Abstract: This study was carried out experimentally and analytically about the performance of solar cell panel system for operating the pump coupled by dc-motor. The solar cell panel with total area 1.9848 m2 consists of three modules of 80 Wp each. The small centrifugal pump powered by dc-motor is operated to lift water from 1m to 7m heads in sequence and gives the amount of water pumped over the whole day from 08.00 to 16.00 h are 11988, 10851, 8874, 7695, 5760, 3600, 2340 L/d respectively. The hourly global solar radiation during the day is an average of 506 W/m2. This study also presents the I-V characteristics of the panel at global radiations 200, 400, 600, 800 and 1000 W/m2 matched with the operation of the pump at the above lifting heads. It proves that the only solar radiations 800 and 1000 W/m2 could provide lifting head from 1m to 7m. The analysis shows the best efficiency point of the performance of solar cell panel system occurs at the pumping head 2.89 m.
Abstract: In order to meet the limits imposed on automotive
emissions, engine control systems are required to constrain air/fuel
ratio (AFR) in a narrow band around the stoichiometric value, due to
the strong decay of catalyst efficiency in case of rich or lean mixture.
This paper presents a model of a sample spark ignition engine and
demonstrates Simulink-s capabilities to model an internal combustion
engine from the throttle to the crankshaft output. We used welldefined
physical principles supplemented, where appropriate, with
empirical relationships that describe the system-s dynamic behavior
without introducing unnecessary complexity. We also presents a PID
tuning method that uses an adaptive fuzzy system to model the
relationship between the controller gains and the target output
response, with the response specification set by desired percent
overshoot and settling time. The adaptive fuzzy based input-output
model is then used to tune on-line the PID gains for different
response specifications. Experimental results demonstrate that better
performance can be achieved with adaptive fuzzy tuning relative to
similar alternative control strategies. The actual response
specifications with adaptive fuzzy matched the desired response
specifications.
Abstract: In this paper present a sensorless maximum wind power extraction for variable speed constant frequency (VSCF) wind power generation systems with a doubly-fed induction generators (DFIG), to ensure stability and to impose the ideal feedback control solution despite of model uncertainties , using the principles of an active and reactive power controller (DPC) a robust sliding mode power control has been proposed to guarantees fast response times and precise control actions for control the active and reactive power independently. The simulation results in MATLAB/Simulink platform confirmed the good dynamic performance of power control approach for DFIGbased variable speed wind turbines.
Abstract: This paper presents a speed sensorless direct torque
control scheme using space vector modulation (DTC-SVM) for
permanent magnet synchronous motor (PMSM) drive based a Model
Reference Adaptive System (MRAS) algorithm and stator resistance
estimator. The MRAS is utilized to estimate speed and stator
resistance and compensate the effects of parameter variation on stator
resistance, which makes flux and torque estimation more accurate
and insensitive to parameter variation. In other hand the use of SVM
method reduces the torque ripple while achieving a good dynamic
response. Simulation results are presented and show the effectiveness
of the proposed method.
Abstract: In this paper, a field oriented control (FOC) induction motor drive is presented. In order to eliminate the speed sensor, an adaptation algorithm for tuning the rotor speed is proposed. Based on the Model Reference Adaptive System (MRAS) scheme, the rotor speed is tuned to obtain an exact FOC induction motor drive. The reference and adjustable models, developed in stationary stator reference frame, are used in the MRAS scheme to estimate induction rotor speed from measured terminal voltages and currents. The Integral Proportional (IP) gains speed controller are tuned by a modern approach that is the Particle Swarm Optimization (PSO) algorithm in order to optimize the parameters of the IP controller. The use of PSO as an optimization algorithm makes the drive robust, with faster dynamic response, higher accuracy and insensitive to load variation. The proposed algorithm has been tested by numerical simulation, showing the capability of driving load.
Abstract: Conflicts identification among non-functional requirements is often identified intuitively which impairs conflict analysis practices. This paper proposes a new model to identify conflicts among non-functional requirements. The proposed model uses the matrix mechanism to identify the quality based conflicts among non-functional requirements. The potential conflicts are identified through the mapping of low level conflicting quality attributes to low level functionalities using the matrices. The proposed model achieves the identification of conflicts among product and process requirements, identifies false conflicts, decreases the documentation overhead, and maintains transparency of identified conflicts. The attributes are not concomitantly taken into account by current models in practice.
Abstract: The present investigation was aimed to develop methodology for the standardization of Marichyadi Vati and its raw materials. Standardization was carried using systematic Pharmacognostical and physicochemical parameters as per WHO guidelines. The detailed standardization of Marichyadi Vati, it is concluded that there are no major differences prevailed in the quality of marketed products and laboratory samples of Marichyadi Vati. However, market samples showed slightly better amount of Piperine than the laboratory sample by both methods. This is the first attempt to generate complete set of standards required for the Marichyadi Vati.
Abstract: MRAM technology provides a combination of fast
access time, non-volatility, data retention and endurance. While a
growing interest is given to two-terminal Magnetic Tunnel Junctions
(MTJ) based on Spin-Transfer Torque (STT) switching as the
potential candidate for a universal memory, its reliability is
dramatically decreased because of the common writing/reading path.
Three-terminal MTJ based on Spin-Orbit Torque (SOT) approach
revitalizes the hope of an ideal MRAM. It can overcome the
reliability barrier encountered in current two-terminal MTJs by
separating the reading and the writing path. In this paper, we study
two possible writing schemes for the SOT-MTJ device based on
recently fabricated samples. While the first is based on precessional
switching, the second requires the presence of permanent magnetic
field. Based on an accurate Verilog-A model, we simulate the two
writing techniques and we highlight advantages and drawbacks of
each one. Using the second technique, pioneering logic circuits based
on the three-terminal architecture of the SOT-MTJ described in this
work are under development with preliminary attractive results.
Abstract: This paper proposes and analyses the wireless
telecommunication system with multiple antennas to the emission
and reception MIMO (multiple input multiple output) with space
diversity in a OFDM context. In particular it analyses the
performance of a DTT (Digital Terrestrial Television) broadcasting
system that includes MIMO-OFDM techniques. Different
propagation channel models and configurations are considered for
each diversity scheme. This study has been carried out in the context
of development of the next generation DVB-T/H and WRAN.
Abstract: In this study concept of experimental design is
successfully applied for the determination of optimum condition to
produce PP/SWCNT (Polypropylene/Single wall carbon nanotube)
nanocomposite. Central composite design as one of experimental
design techniques is employed for the optimization and statistical
determination of the significant factors influencing on the tensile
modulus and yield stress as mechanical properties of this
nanocomposite. The significant factors are SWCNT weight fraction
and acid treatment time for functionalizing the nanoparticles.
Optimum conditions are in 0.7 % of SWCNT weight fraction and 210
min as acid treatment time for 1112.75 ± 28 MPa as maximum tensile
modulus and in 216 min and 0.65 % as acid treatment time and
SWCNT weight fraction respectively for 40.26 ± 0.3 MPa as
maximum yield stress. Also after setting new experiments for test
these optimum conditions, found excelent agreement with predicted
values.
Abstract: A multi fingered dexterous anthropomorphic hand is
being developed by the authors. The focus of the hand is the
replacement of human operators in hazardous environments and also
in environments where zero tolerance is observed for the human
errors. The robotic hand will comprise of five fingers (four fingers
and one thumb) each having four degrees of freedom (DOF) which
can perform flexion, extension, abduction, adduction and also
circumduction. For the actuation purpose pneumatic muscles and
springs will be used. The paper exemplifies the mechanical design for
the robotic hand. It also describes different mechanical designs that
have been developed before date.