Abstract: In this paper, a FitzHugh-Nagumo model with time delays is investigated. The linear stability of the equilibrium and the existence of Hopf bifurcation with delay τ is investigated. By applying Nyquist criterion, the length of delay is estimated for which stability continues to hold. Numerical simulations for justifying the theoretical results are illustrated. Finally, main conclusions are given.
Abstract: Provision of optical devices without proper instruction
and training may cause frustration resulting in rejection or incorrect
use of the magnifiers. However training in the use of magnifiers
increases the cost of providing these devices. This study compared
the efficacy of providing instruction alone and instruction plus
training in the use of magnifiers. 24 participants randomly assigned
to two groups. 15 received instruction and training and 9 received
instruction only. Repeated measures of print size and reading speed
were performed at pre, post training and follow up. Print size
decreased in both groups between pre and post training maintained at
follow up. Reading speed increased in both groups over time with the
training group demonstrating more rapid improvement. Whilst
overall outcomes were similar, training decreased the time required
to increase reading speed supporting the use of training for increased
efficiency. A cost effective form of training is suggested.
Abstract: This paper present lease agreement regulations in
selected European countries. The lease agreement has a long history
and now is one of the main ways to manage agricultural lands in
Europe. The analysis of individual regulations, which has been done,
indicates that this agreement is very important to build social
relations in agriculture and society. This article provides an analysis
of the legal regulations concerning the lease in France, Spain,
Switzerland, Ukraine and Italy. Article is example of study of the
legal regulations and can be used for legal changes in individual
countries.
Abstract: The robustness of color-based signatures in the presence of a selection of representative distortions is investigated. Considered are five signatures that have been developed and evaluated within a new modular framework. Two signatures presented in this work are directly derived from histograms gathered from video frames. The other three signatures are based on temporal information by computing difference histograms between adjacent frames. In order to obtain objective and reproducible results, the evaluations are conducted based on several randomly assembled test sets. These test sets are extracted from a video repository that contains a wide range of broadcast content including documentaries, sports, news, movies, etc. Overall, the experimental results show the adequacy of color-histogram-based signatures for video fingerprinting applications and indicate which type of signature should be preferred in the presence of certain distortions.
Abstract: The presence of a vertical edge-crack within a web
plate subjected to pure bending induces local compressive stresses
about the crack which may cause tension buckling. Approximate
theoretical expressions were derived for the critical far-field tensile
stress and bending moment capacity of an edge-cracked web plate
associated with tension buckling. These expressions were validated
with finite element analyses and used to investigate the possibility of
tension buckling in web-cracked trial girders. It was found that
tension buckling is an unlikely occurrence unless the web is relatively
thin or the crack is very long.
Abstract: Entrepreneurs are important for national labour markets and economies in that they contribute significantly to economic growth as well as provide the majority of jobs and create new ones. According to the Global Entrepreneurship Monitor’s “Report on Women and Entrepreneurship”, investment in women’s entrepreneurship is an important way to exponentially increase the impact of new venture creation finding ways to empower women’s participation and success in entrepreneurship are critical for more sustainable and successful economic development. Our results confirm that they are still differences between men and women entrepreneurs The reasons seems to be the lack of specific business skills, the less extensive social network, and the lack of identification patterns among women. Those differences can be explained by the fact that women still have fewer opportunities to make a career. If this is correct, we can predict an increasing proportion of women among entrepreneurs in the next years. Concerning the development of a favorable environment for developing and enhancing women entrepreneurship activities, our results show the insertion in a network and the role of a model doubtless represent elements determining in the choice to launch an entrepreneurship activity, as well as a precious resource for the success of her company.
Abstract: The study is based on the assumption that media products are appropriate subjects for the exploration of social and cultural identities as a keystone of value orientations of their authors, producers and target audiences. The research object of the study is the title page of the book cover of a professional publication that serves as a medium of marketing, scientific and intercultural communication, which is the result of semiotic and intercultural transfer. The study aims to answer the question whether the book cover is an expression of conceptualization and tool for social identity construction. It attempts to determine what value orientations and what concepts of social and cultural identities are hidden in the narrative structures of the book cover of the Czech translation of the book by G. Ritzer The McDonaldization of Society (1993), issued after the fall of the iron curtain in 1996 in the Czech Republic.
Abstract: Among the technologies available to reduce methane
emitted from the pig industry, biofiltration seems to be an effective
and inexpensive solution. In methane (CH4) biofiltration, nitrogen is
an important macronutrient for the microorganisms growth. The
objective of this research project was to study the effect of
ammonium (NH4
+) on the performance, the biomass production and
the nitrogen conversion of a biofilter treating methane. For NH4
+
concentrations ranging from 0.05 to 0.5 gN-NH4
+/L, the CH4 removal
efficiency and the dioxide carbon production rate decreased linearly
from 68 to 11.8 % and from 7.1 to 0.5 g/(m3-h), respectively. The dry
biomass content varied from 4.1 to 5.8 kg/(m3 filter bed). For the
same range of concentrations, the ammonium conversion decreased
while the specific nitrate production rate increased. The specific
nitrate production rate presented negative values indicating
denitrification in the biofilter.
Abstract: This paper gives an overview of a deep drawing
process by pressurized liquid medium separated from the sheet by a
rubber diaphragm. Hydroforming deep drawing processing of sheet
metal parts provides a number of advantages over conventional
techniques. It generally increases the depth to diameter ratio possible
in cup drawing and minimizes the thickness variation of the drawn
cup. To explore the deformation mechanism, analytical and
numerical simulations are used for analyzing the drawing process of
an AA6061-T4 blank. The effects of key process parameters such as
coefficient of friction, initial thickness of the blank and radius
between cup wall and flange are investigated analytically and
numerically. The simulated results were in good agreement with the
results of the analytical model. According to finite element
simulations, the hydroforming deep drawing method provides a more
uniform thickness distribution compared to conventional deep
drawing and decreases the risk of tearing during the process.
Abstract: Several methods are available for weight and shape
optimization of structures, among which Evolutionary Structural
Optimization (ESO) is one of the most widely used methods. In ESO,
however, the optimization criterion is completely case-dependent.
Moreover, only the improving solutions are accepted during the
search. In this paper a Simulated Annealing (SA) algorithm is used
for structural optimization problem. This algorithm differs from other
random search methods by accepting non-improving solutions. The
implementation of SA algorithm is done through reducing the
number of finite element analyses (function evaluations).
Computational results show that SA can efficiently and effectively
solve such optimization problems within short search time.
Abstract: When a lightning strike falls near an overhead power
line, the intense electromagnetic field radiated by the current of the
lightning return stroke coupled with power lines and there induced
transient overvoltages, which can cause a back-flashover in electrical
network. The indirect lightning represents a major danger owing to
the fact that it is more frequent than that which results from the direct
strikes.
In this paper we present an analysis of the electromagnetic
coupling between an external electromagnetic field generated by the
lightning and an electrical overhead lines, so we give an important
and original contribution: We are based on our experimental
measurements which we carried in the high voltage laboratories of
EPFL in Switzerland during the last trimester of 2005, on the recent
works of other authors and with our mathematical improvement a
new particular analytical expression of the electromagnetic field
generated by the lightning return stroke was developed and presented
in this paper. The results obtained by this new electromagnetic field
formulation were compared with experimental results and give a
reasonable approach.
Abstract: This paper presents unified theory for local (Savitzky-
Golay) and global polynomial smoothing. The algebraic framework
can represent any polynomial approximation and is seamless from
low degree local, to high degree global approximations. The representation
of the smoothing operator as a projection onto orthonormal
basis functions enables the computation of: the covariance matrix
for noise propagation through the filter; the noise gain and; the
frequency response of the polynomial filters. A virtually perfect Gram
polynomial basis is synthesized, whereby polynomials of degree
d = 1000 can be synthesized without significant errors. The perfect
basis ensures that the filters are strictly polynomial preserving. Given
n points and a support length ls = 2m + 1 then the smoothing
operator is strictly linear phase for the points xi, i = m+1. . . n-m.
The method is demonstrated on geometric surfaces data lying on an
invariant 2D lattice.
Abstract: Nowadays, ontologies are the only widely accepted paradigm for the management of sharable and reusable knowledge in a way that allows its automatic interpretation. They are collaboratively created across the Web and used to index, search and annotate documents. The vast majority of the ontology based approaches, however, focus on indexing texts at document level. Recently, with the advances in ontological engineering, it became clear that information indexing can largely benefit from the use of general purpose ontologies which aid the indexing of documents at word level. This paper presents a concept indexing algorithm, which adds ontology information to words and phrases and allows full text to be searched, browsed and analyzed at different levels of abstraction. This algorithm uses a general purpose ontology, OntoRo, and an ontologically tagged corpus, OntoCorp, both developed for the purpose of this research. OntoRo and OntoCorp are used in a two-stage supervised machine learning process aimed at generating ontology tagging rules. The first experimental tests show a tagging accuracy of 78.91% which is encouraging in terms of the further improvement of the algorithm.
Abstract: The paper shows how the CASMAS modeling language,
and its associated pervasive computing architecture, can be
used to facilitate continuity of care by providing members of patientcentered
communities of care with a support to cooperation and
knowledge sharing through the usage of electronic documents and
digital devices. We consider a scenario of clearly fragmented care to
show how proper mechanisms can be defined to facilitate a better
integration of practices and information across heterogeneous care
networks. The scenario is declined in terms of architectural components
and cooperation-oriented mechanisms that make the support
reactive to the evolution of the context where these communities
operate.
Abstract: In this paper, we investigate the problem of the existence, uniqueness and global asymptotic stability of the equilibrium point for a class of neural networks, the neutral system has mixed time delays and parameter uncertainties. Under the assumption that the activation functions are globally Lipschitz continuous, we drive a new criterion for the robust stability of a class of neural networks with time delays by utilizing the Lyapunov stability theorems and the Homomorphic mapping theorem. Numerical examples are given to illustrate the effectiveness and the advantage of the proposed main results.
Abstract: The compressive strength development through
polymerization process of alkaline solution and fly ash blended with Microwave Incinerated Rice Husk Ash (MIRHA) is described in this
paper. Three curing conditions, which are hot gunny curing, ambient
curing, and external humidity curing are investigated to obtain the suitable curing condition for cast in situ provision. Fly ash was
blended with MIRHA at 3%, 5%, and 7% to identify the effect of blended mixes to the compressive strength and microstructure
properties of geopolymer concrete. Compressive strength results
indicated an improvement in the strength development with external humidity curing concrete samples compared to hot gunny curing and
ambient curing. Blended mixes also presented better performance
than control mixes. Improvement of interfacial transition zone (ITZ)
and micro structure in external humidity concrete samples were also
identified compared to hot gunny and ambient curing.
Abstract: Stock portfolio selection is a classic problem in finance,
and it involves deciding how to allocate an institution-s or an individual-s
wealth to a number of stocks, with certain investment objectives
(return and risk). In this paper, we adopt the classical Markowitz
mean-variance model and consider an additional common realistic
constraint, namely, the cardinality constraint. Thus, stock portfolio
optimization becomes a mixed-integer quadratic programming problem
and it is difficult to be solved by exact optimization algorithms.
Chemical Reaction Optimization (CRO), which mimics the molecular
interactions in a chemical reaction process, is a population-based
metaheuristic method. Two different types of CRO, named canonical
CRO and Super Molecule-based CRO (S-CRO), are proposed to solve
the stock portfolio selection problem. We test both canonical CRO
and S-CRO on a benchmark and compare their performance under
two criteria: Markowitz efficient frontier (Pareto frontier) and Sharpe
ratio. Computational experiments suggest that S-CRO is promising
in handling the stock portfolio optimization problem.
Abstract: The present article deals with a composite casting process that allows to produce bilayer AlSn6-Al strips based on the technique of horizontal continuous casting. In the first part experimental investigations on the production of a single layer AlSn6 strip are described. Afterwards essential results of basic compound casting trials using simple test specimen are presented to define the thermal conditions required for a metallurgical compound between the alloy AlSn6 and pure aluminium. Subsequently, numerical analyses are described. A finite element model was used to examine a continuous composite casting process. As a result of the simulations the main influencing parameters concerning the thermal conditions within the composite casting region could be pointed out. Finally, basic guidance is given for the design of an appropriate composite mould system.
Abstract: According to celebrated Hurwitz theorem, there exists
four division algebras consisting of R (real numbers), C (complex
numbers), H (quaternions) and O (octonions). Keeping in view
the utility of octonion variable we have tried to extend the three
dimensional vector analysis to seven dimensional one. Starting with
the scalar and vector product in seven dimensions, we have redefined
the gradient, divergence and curl in seven dimension. It is shown
that the identity n(n - 1)(n - 3)(n - 7) = 0 is satisfied only
for 0, 1, 3 and 7 dimensional vectors. We have tried to write all
the vector inequalities and formulas in terms of seven dimensions
and it is shown that same formulas loose their meaning in seven
dimensions due to non-associativity of octonions. The vector formulas
are retained only if we put certain restrictions on octonions and split
octonions.
Abstract: In this note, we demonstrate explicit LU
factorizations of Toeplitz matrices for some small sizes. Furthermore,
we obtain the inverse of referred Toeplitz matrices by appling the
above-mentioned results.