Abstract: This article attempts to analyze functionally graded beam thermal buckling along with piezoelectric layers applying based on the third order shearing deformation theory considering various boundary conditions. The beam properties are assumed to vary continuously from the lower surface to the upper surface of the beam. The equilibrium equations are derived using the total potential energy equations, Euler equations, piezoelectric material constitutive equations and third order shear deformation theory assumptions. In order to fulfill such an aim, at first functionally graded beam with piezoelectric layers applying the third order shearing deformation theory along with clamped -clamped boundary conditions are thoroughly analyzed, and then following making sure of the correctness of all the equations, the very same beam is analyzed with piezoelectric layers through simply-simply and simply-clamped boundary conditions. In this article buckling critical temperature for functionally graded beam is derived in two different ways, without piezoelectric layer and with piezoelectric layer and the results are compared together. Finally, all the conclusions obtained will be compared and contrasted with the same samples in the same and distinguished conditions through tables and charts. It would be noteworthy that in this article, the software MAPLE has been applied in order to do the numeral calculations.
Abstract: This study was investigated on sampling and
analyzing water quality in water reservoir & water tower installed in
two kind of residential buildings and school facilities. Data of water
quality was collected for correlation analysis with frequency of
sanitization of water reservoir through questioning managers of
building about the inspection charts recorded on equipment for water
reservoir. Statistical software packages (SPSS) were applied to the
data of two groups (cleaning frequency and water quality) for
regression analysis to determine the optimal cleaning frequency of
sanitization. The correlation coefficient (R) in this paper represented
the degree of correlation, with values of R ranging from +1 to -1.After
investigating three categories of drinking water users; this study found
that the frequency of sanitization of water reservoir significantly
influenced the water quality of drinking water. A higher frequency of
sanitization (more than four times per 1 year) implied a higher quality
of drinking water. Results indicated that sanitizing water reservoir &
water tower should at least twice annually for achieving the aim of
safety of drinking water.
Abstract: Previous the 3D model texture generation from multi-view images and mapping algorithms has issues in the texture chart generation which are the self-intersection and the concentration of the texture in texture space. Also we may suffer from some problems due to the occluded areas, such as inside parts of thighs. In this paper we propose a texture mapping technique for 3D models using multi-view images on the GPU. We do texture mapping directly on the GPU fragment shader per pixel without generation of the texture map. And we solve for the occluded area using the 3D model depth information. Our method needs more calculation on the GPU than previous works, but it has shown real-time performance and previously mentioned problems do not occur.
Abstract: Considering payload, reliability, security and operational lifetime as major constraints in transmission of images we put forward in this paper a steganographic technique implemented at the physical layer. We suggest transmission of Halftoned images (payload constraint) in wireless sensor networks to reduce the amount of transmitted data. For low power and interference limited applications Turbo codes provide suitable reliability. Ensuring security is one of the highest priorities in many sensor networks. The Turbo Code structure apart from providing forward error correction can be utilized to provide for encryption. We first consider the Halftoned image and then the method of embedding a block of data (called secret) in this Halftoned image during the turbo encoding process is presented. The small modifications required at the turbo decoder end to extract the embedded data are presented next. The implementation complexity and the degradation of the BER (bit error rate) in the Turbo based stego system are analyzed. Using some of the entropy based crypt analytic techniques we show that the strength of our Turbo based stego system approaches that found in the OTPs (one time pad).
Abstract: This paper provides an introduction into the evolution
of information and communication technology and illustrates its
usage in the work domain. The paper is sub-divided into two parts.
The first part gives an overview over the different phases of
information processing in the work domain. It starts by charting the
past and present usage of computers in work environments and shows
current technological trends, which are likely to influence future
business applications. The second part starts by briefly describing,
how the usage of computers changed business processes in the past,
and presents first Ambient Intelligence applications based on
identification and localization information, which are already used in
the production and retail sector. Based on current systems and
prototype applications, the paper gives an outlook of how Ambient
Intelligence technologies could change business processes in the
future.
Abstract: Bendability is constrained by maximum top roller
load imparting capacity of the machine. Maximum load is
encountered during the edge pre-bending stage of roller bending.
Capacity of 3-roller plate bending machine is specified by
maximum thickness and minimum shell diameter combinations that
can be pre-bend for given plate material of maximum width.
Commercially available plate width or width of the plate that can be
accommodated on machine decides the maximum rolling width.
Original equipment manufacturers (OEM) provide the machine
capacity chart based on reference material considering perfectly
plastic material model. Reported work shows the bendability analysis
of heavy duty 3-roller plate bending machine. The input variables for
the industry are plate thickness, shell diameter and material property
parameters, as it is fixed by the design. Analytical models of
equivalent thickness, equivalent width and maximum width based on
power law material model were derived to study the bendability.
Equation of maximum width provides bendability for designed
configuration i.e. material property, shell diameter and thickness
combinations within the machine limitations. Equivalent thicknesses
based on perfectly plastic and power law material model were
compared for four different materials grades of C-Mn steel in order
to predict the bend-ability. Effect of top roller offset on the
bendability at maximum top roller load imparting capacity is
reported.
Abstract: In recent past, the Unified Modeling Language (UML) has become the de facto industry standard for object-oriented modeling of the software systems. The syntax and semantics rich UML has encouraged industry to develop several supporting tools including those capable of generating deployable product (code) from the UML models. As a consequence, ensuring the correctness of the model/design has become challenging and extremely important task. In this paper, we present an approach for automatic verification of protocol model/design. As a case study, Session Initiation Protocol (SIP) design is verified for the property, “the CALLER will not converse with the CALLEE before the connection is established between them ". The SIP is modeled using UML statechart diagrams and the desired properties are expressed in temporal logic. Our prototype verifier “UML-SMV" is used to carry out the verification. We subjected an erroneous SIP model to the UML-SMV, the verifier could successfully detect the error (in 76.26ms) and generate the error trace.
Abstract: These paper, we approximate the average run length
(ARL) for CUSUM chart when observation are an exponential first
order moving average sequence (EMA1). We used Gauss-Legendre
numerical scheme for integral equations (IE) method for approximate
ARL0 and ARL1, where ARL in control and out of control,
respectively. We compared the results from IE method and exact
solution such that the two methods perform good agreement.
Abstract: Anaerobic Digestion has become a promising
technology for biological transformation of organic fraction of the
municipal solid wastes (MSW). In order to represent the kinetic
behavior of such biological process and thereby to design a reactor
system, development of a mathematical model is essential.
Addressing this issue, a simplistic mathematical model has been
developed for anaerobic digestion of MSW in a continuous flow
reactor unit under homogeneous steady state condition. Upon
simulated hydrolysis, the kinetics of biomass growth and substrate
utilization rate are assumed to follow first order reaction kinetics.
Simulation of this model has been conducted by studying sensitivity
of various process variables. The model was simulated using typical
kinetic data of anaerobic digestion MSW and typical MSW
characteristics of Kolkata. The hydraulic retention time (HRT) and
solid retention time (SRT) time were mainly estimated by varying
different model parameters like efficiency of reactor, influent
substrate concentration and biomass concentration. Consequently,
design table and charts have also been prepared for ready use in the
actual plant operation.
Abstract: Aspect Oriented Programming promises many
advantages at programming level by incorporating the cross cutting
concerns into separate units, called aspects. Join Points are
distinguishing features of Aspect Oriented Programming as they
define the points where core requirements and crosscutting concerns
are (inter)connected. Currently, there is a problem of multiple
aspects- composition at the same join point, which introduces the
issues like ordering and controlling of these superimposed aspects.
Dynamic strategies are required to handle these issues as early as
possible. State chart is an effective modeling tool to capture dynamic
behavior at high level design. This paper provides methodology to
formulate the strategies for multiple aspect composition at high level,
which helps to better implement these strategies at coding level. It
also highlights the need of designing shared join point at high level,
by providing the solutions of these issues using state chart diagrams
in UML 2.0. High level design representation of shared join points
also helps to implement the designed strategy in systematic way.
Abstract: In many industries, control charts is one of the most
frequently used tools for quality management. Hotelling-s T2 is used
widely in multivariate control chart. However, it has little defect when
detecting small or medium process shifts. The use of supplementary
sensitizing rules can improve the performance of detection. This study
applied sensitizing rules for Hotelling-s T2 control chart to improve the
performance of detection. Support vector machines (SVM) classifier
to identify the characteristic or group of characteristics that are
responsible for the signal and to classify the magnitude of the mean
shifts. The experimental results demonstrate that the support vector
machines (SVM) classifier can effectively identify the characteristic
or group of characteristics that caused the process mean shifts and the
magnitude of the shifts.
Abstract: This paper presents preliminary results of a
technology assessment analysis for the use of high pressure treatment
(HPT) on Halloumi cheese. In particular, it presents the importance
of this traditional Cyprus cheese to the island-s economy, explains its
production process, and gives a brief introduction to HPT and its
application on cheese. More importantly, it offers preliminary results
of HPT of Halloumi samples and a preliminary economic feasibility
study on the financial implications of the introduction of such
technology.
Abstract: In some real applications of Statistical Process Control
it is necessary to design a control chart to not detect small process
shifts, but keeping a good performance to detect moderate and large
shifts in the quality. In this work we develop a new quality control
chart, the synthetic T2 control chart, that can be designed to cope with
this objective. A multi-objective optimization is carried out employing
Genetic Algorithms, finding the Pareto-optimal front of
non-dominated solutions for this optimization problem.
Abstract: Traditional multivariate control charts assume that measurement from manufacturing processes follows a multivariate normal distribution. However, this assumption may not hold or may be difficult to verify because not all the measurement from manufacturing processes are normal distributed in practice. This study develops a new multivariate control chart for monitoring the processes with non-normal data. We propose a mechanism based on integrating the one-class classification method and the adaptive technique. The adaptive technique is used to improve the sensitivity to small shift on one-class classification in statistical process control. In addition, this design provides an easy way to allocate the value of type I error so it is easier to be implemented. Finally, the simulation study and the real data from industry are used to demonstrate the effectiveness of the propose control charts.
Abstract: Currently, slider process of Hard Disk Drive Industry
become more complex, defective diagnosis for yield improvement
becomes more complicated and time-consumed. Manufacturing data
analysis with data mining approach is widely used for solving that
problem. The existing mining approach from combining of the KMean
clustering, the machine oriented Kruskal-Wallis test and the
multivariate chart were applied for defective diagnosis but it is still
be a semiautomatic diagnosis system. This article aims to modify an
algorithm to support an automatic decision for the existing approach.
Based on the research framework, the new approach can do an
automatic diagnosis and help engineer to find out the defective
factors faster than the existing approach about 50%.
Abstract: The objective of this research is to study plant layout
of iron manufacturing based on the systematic layout planning
pattern theory (SLP) for increased productivity. In this case study,
amount of equipments and tools in iron production are studied. The
detailed study of the plant layout such as operation process chart,
flow of material and activity relationship chart has been investigated.
The new plant layout has been designed and compared with the
present plant layout. The SLP method showed that new plant layout
significantly decrease the distance of material flow from billet
cutting process until keeping in ware house.
Abstract: The objective of this paper is to study the analysis and testing for determining the torsional stiffness of the student formula-s space frame. From past study, the space frame for Chulalongkorn University Student Formula team used in 2011 TSAE Auto Challenge Student Formula in Thailand was designed by considering required mass and torsional stiffness based on the numerical method and experimental method. The numerical result was compared with the experimental results to verify the torsional stiffness of the space frame. It can be seen from the large error of torsional stiffness of 2011 frame that the experimental result can not verify by the numerical analysis due to the different between the numerical model and experimental setting. In this paper, the numerical analysis and experiment of the same 2011 frame model is performed by improving the model setting. The improvement of both numerical analysis and experiment are discussed to confirm that the models from both methods are same. After the frame was analyzed and tested, the results are compared to verify the torsional stiffness of the frame. It can be concluded that the improved analysis and experiments can used to verify the torsional stiffness of the space frame.
Abstract: In this study we present our developed formative
assessment tool for students' assignments. The tool enables lecturers
to define assignments for the course and assign each problem in each
assignment a list of criteria and weights by which the students' work
is evaluated. During assessment, the lecturers feed the scores for each
criterion with justifications. When the scores of the current
assignment are completely fed in, the tool automatically generates
reports for both students and lecturers. The students receive a report
by email including detailed description of their assessed work, their
relative score and their progress across the criteria along the course
timeline. This information is presented via charts generated
automatically by the tool based on the scores fed in. The lecturers
receive a report that includes summative (e.g., averages, standard
deviations) and detailed (e.g., histogram) data of the current
assignment. This information enables the lecturers to follow the class
achievements and adjust the learning process accordingly. The tool
was examined on two pilot groups of college students that study a
course in (1) Object-Oriented Programming (2) Plane Geometry.
Results reveal that most of the students were satisfied with the
assessment process and the reports produced by the tool. The
lecturers who used the tool were also satisfied with the reports and
their contribution to the learning process.
Abstract: This paper presents an effective framework for Chinesesyntactic parsing, which includes two parts. The first one is a parsing framework, which is based on an improved bottom-up chart parsingalgorithm, and integrates the idea of the beam search strategy of N bestalgorithm and heuristic function of A* algorithm for pruning, then get multiple parsing trees. The second is a novel evaluation model, which integrates contextual and partial lexical information into traditional PCFG model and defines a new score function. Using this model, the tree with the highest score is found out as the best parsing tree. Finally,the contrasting experiment results are given. Keywords?syntactic parsing, PCFG, pruning, evaluation model.
Abstract: CFlow is a flow chart software, it contains facilities to
draw and evaluate a flow chart. A flow chart evaluation applies a
simulation method to enable presentation of work flow in a flow
chart solution. Flow chart simulation of CFlow is executed by
manipulating the CFlow data file which is saved in a graphical vector
format. These text-based data are organised by using a data
classification technic based on a Library classification-scheme. This
paper describes the file format for flow chart simulation software of
CFlow.