Abstract: The purpose of this research is: a) to investigate how
the HR practices influence psychological contracts, b) to examine the
influence of psychological contracts to individual behavior and to
contribute individually, c) to study the psychological contact through
leadership. This research using mixed methods, qualitative and
quantitative research methods were utilized to gather the data
collected using a qualitative method by the HR Manager who is in
charge of the trainings from the staffs and quantitative method
(survey) by using questionnaire was utilized to draw upon and to
elaborate on the recurring themes present during the interviews. The
survey was done to 400 staffs of the company. The study found that
leadership styles supporting the firm’s HR strategy is the key in
making psychological contracts that benefit both the firm and its
members.
Abstract: In this paper we improve the quasilinearization method by barycentric Lagrange interpolation because of its numerical stability and computation speed to achieve a stable semi analytical solution. Then we applied the improved method for solving the Fin problem which is a nonlinear equation that occurs in the heat transferring. In the quasilinearization approach the nonlinear differential equation is treated by approximating the nonlinear terms by a sequence of linear expressions. The modified QLM is iterative but not perturbative and gives stable semi analytical solutions to nonlinear problems without depending on the existence of a smallness parameter. Comparison with some numerical solutions shows that the present solution is applicable.
Abstract: The paper is intended to declare and apply ethics, i. e.
moral principles, rules in marketing environment. Ethical behavior of
selected pharmaceutical companies in the Slovak Republic is the
object of our research. The aim of our research is to determine
perception of ethical behavior of the pharmaceutical industry in
Slovakia by the medicine representatives in comparison with the
assessment of doctors and patients. The experimental sample
included 90 participants who were divided into three groups:
medicine representatives of the pharmaceutical companies (N=30),
doctors (N=30) and patients (N=30). The research method was a
Questionnaire of ethical behavior, created by us, that describes
individual areas included in the Code of ethics of the pharmaceutical
industry in Slovakia. The results showed influence of professional
status on ethical behavior perception, not gender. Higher perception
was indicated at patients rather than doctors and medicine
representatives.
Abstract: PARIS (Personal Archiving and Retrieving Image
System) is an experiment personal photograph library, which includes
more than 80,000 of consumer photographs accumulated within a
duration of approximately five years, metadata based on our proposed
MPEG-7 annotation architecture, Dozen Dimensional Digital Content
(DDDC), and a relational database structure. The DDDC architecture
is specially designed for facilitating the managing, browsing and
retrieving of personal digital photograph collections. In annotating
process, we also utilize a proposed Spatial and Temporal Ontology
(STO) designed based on the general characteristic of personal
photograph collections. This paper explains PRAIS system.
Abstract: For higher order multiplications, a huge number of
adders or compressors are to be used to perform the partial product
addition. We have reduced the number of adders by introducing
special kind of adders that are capable to add five/six/seven bits per
decade. These adders are called compressors. Binary counter
property has been merged with the compressor property to develop
high order compressors. Uses of these compressors permit the
reduction of the vertical critical paths. A 16×16 bit multiplier has
been developed using these compressors. These compressors make
the multipliers faster as compared to the conventional design that
have been used 4-2 compressors and 3-2 compressors.
Abstract: The aim of the study was to follow changes of powervelocity
relationship in female volleyball players during an annual
training cycle. The study was conducted on eleven female volleyball
players: age 21.6±1.7 years, body height 177.9±4.7 cm, body mass
71.3±6.6 kg and training experience 8.6±3.3 years. Power–velocity
relationship was determined from five maximal 10-second
cycloergometer efforts with external loads equal: 2.5, 5.0, 7.5, 10.0
and 12.5% of body weight (BW) before (I) and after (II) the
preparatory period, after the first (III) and second (IV) competitive
season. The maximal power output increased from 9.30±0.85 W•kg–1
(I) to 9.50±0.96 W•kg–1 (II), 9.77±0.96 W•kg–1 (III) and 9.95±1.13
W•kg–1 (IV, p
Abstract: In this paper, the effects of thermodynamic,
hydrodynamic and geometric of an air cooled condenser on COP of
vapor compression cycle are investigated for a fixed condenser facing
surface area. The system is utilized with a scroll compressor,
modeled based on thermodynamic and heat transfer equations
employing Matlab software. The working refrigerant is R134a whose
thermodynamic properties are called from Engineering Equation
Software. This simulation shows that vapor compression cycle can
be designed by different configurations and COPs, economical and
optimum working condition can be obtained via considering these
parameters.
Abstract: The theory of Groebner Bases, which has recently been
honored with the ACM Paris Kanellakis Theory and Practice Award,
has become a crucial building block to computer algebra, and is
widely used in science, engineering, and computer science. It is wellknown
that Groebner bases computation is EXP-SPACE in a general
setting. In this paper, we give an algorithm to show that Groebner
bases computation is P-SPACE in Boolean rings. We also show that
with this discovery, the Groebner bases method can theoretically be
as efficient as other methods for automated verification of hardware
and software. Additionally, many useful and interesting properties of
Groebner bases including the ability to efficiently convert the bases
for different orders of variables making Groebner bases a promising
method in automated verification.
Abstract: The purpose of this study is to find natural gait of
biped robot such as human being by analyzing the COG (Center Of
Gravity) trajectory of human being's gait. It is discovered that human
beings gait naturally maintain the stability and use the minimum
energy. This paper intends to find the natural gait pattern of biped
robot using the minimum energy as well as maintaining the stability by
analyzing the human's gait pattern that is measured from gait image on
the sagittal plane and COG trajectory on the frontal plane. It is not
possible to apply the torques of human's articulation to those of biped
robot's because they have different degrees of freedom. Nonetheless,
human and 5-link biped robots are similar in kinematics. For this, we
generate gait pattern of the 5-link biped robot by using the GA
algorithm of adaptation gait pattern which utilize the human's ZMP
(Zero Moment Point) and torque of all articulation that are measured
from human's gait pattern. The algorithm proposed creates biped
robot's fluent gait pattern as that of human being's and to minimize
energy consumption because the gait pattern of the 5-link biped robot
model is modeled after consideration about the torque of human's each
articulation on the sagittal plane and ZMP trajectory on the frontal
plane. This paper demonstrate that the algorithm proposed is superior
by evaluating 2 kinds of the 5-link biped robot applied to each gait
patterns generated both in the general way using inverse kinematics
and in the special way in which by considering visuality and
efficiency.
Abstract: One way for optimum loading of overdimensioning
conveyers is speed (capacity) decrement, with attention for
production capabilities and demands. At conveyers which drives with
three phase slip-ring induction motor, technically reasonable solution
for conveyer (driving motors) speed regulation is using constant
torque subsynchronous cascade with static semiconductor converter
and transformer for energy reversion to the power network. In the
paper is described mathematical model for parameter calculation of
two-motors 6 kV subsynchronous cascade. It is also demonstrated
that applying of this cascade gave several good properties, foremost
in electrical energy saving, also in improving of other energy
indexes, and finally that results in cost reduction of complete
electrical motor drive.
Abstract: In this paper we investigated a number of the Internet
congestion control algorithms that has been developed in the last few
years. It was obviously found that many of these algorithms were
designed to deal with the Internet traffic merely as a train of
consequent packets. Other few algorithms were specifically tailored
to handle the Internet congestion caused by running media traffic that
represents audiovisual content. This later set of algorithms is
considered to be aware of the nature of this media content. In this
context we briefly explained a number of congestion control
algorithms and hence categorized them into the two following
categories: i) Media congestion control algorithms. ii) Common
congestion control algorithms. We hereby recommend the usage of
the media congestion control algorithms for the reason of being
media content-aware rather than the other common type of
algorithms that blindly manipulates such traffic. We showed that the
spread of such media content-aware algorithms over Internet will
lead to better congestion control status in the coming years. This is
due to the observed emergence of the era of digital convergence
where the media traffic type will form the majority of the Internet
traffic.
Abstract: IMCS is Integrated Monitoring and Control System for
thermal power plant. This system consists of mainly two parts; controllers and OIS (Operator Interface System). These two parts are
connected by Ethernet-based communication. The controller side of communication is managed by CNet module and OIS side is managed
by data server of OIS. CNet module sends the data of controller to data
server and receives commend data from data server. To minimizes or
balance the load of data server, this module buffers data created by controller at every cycle and send buffered data to data server on request of data server. For multiple data server, this module manages
the connection line with each data server and response for each request
from multiple data server. CNet module is included in each controller
of redundant system. When controller fail-over happens on redundant system, this module can provide data of controller to data sever
without loss. This paper presents three main features – separation of get task, usage of ring buffer and monitoring communication status –of CNet module to carry out these functions.
Abstract: Several trillion cigarettes produced worldwide annually lead to many thousands of kilograms of toxic waste. Cigarette butts (CBs) accumulate in the environment due to the poor biodegradability of the cellulose acetate filters. This paper presents some of the results from a continuing study on recycling CBs into fired clay bricks. Physico-mechanical properties of fired clay bricks manufactured with different percentages of CBs are reported and discussed. The results show that the density of fired bricks was reduced by up to 30 %, depending on the percentage of CBs incorporated into the raw materials. Similarly, the compressive strength of bricks tested decreased according to the percentage of CBs included in the mix. The thermal conductivity performance of bricks was improved by 51 and 58 % for 5 and 10 % CBs content respectively. Leaching tests were carried out to investigate the levels of possible leachates of heavy metals from the manufactured clay-CB bricks. The results revealed trace amounts of heavy metals.
Abstract: A proof of convergence of a new continuation algorithm for computing the Analytic SVD for a large sparse parameter– dependent matrix is given. The algorithm itself was developed and numerically tested in [5].
Abstract: Sandwich panels are widely used in the construction
industry for their ease of assembly, light weight and efficient thermal
performance. They are composed of two RC thin outer layers
separated by an insulating inner layer. In this research the inner
insulating layer is made of lightweight Autoclaved Aerated Concrete
(AAC) blocks which has good thermal insulation properties and yet
possess reasonable mechanical strength. The shear strength of the
AAC infill is relied upon to replace the traditionally used insulating
foam and to provide the shear capacity of the panel. A
comprehensive experimental program was conducted on full scale
sandwich panels subjected to bending. In this paper, detailed
numerical modeling of the tested sandwich panels is reported. Nonlinear
3-D finite element modeling of the composite action of the
sandwich panel is developed using ANSYS. Solid elements with
different crashing and cracking capabilities and different constitutive
laws were selected for the concrete and the AAC. Contact interface
elements are used in this research to adequately model the shear
transfer at the interface between the different layers. The numerical
results showed good correlation with the experimental ones
indicating the adequacy of the model in estimating the loading
capacity of panels.
Abstract: Experiments were conducted to characterize fire
properties of wood exposed to the certain external heat flux and
under variety of wood moisture content. Six kinds of Indonesian
wood: keruing, sono, cemara, kamper, pinus, and mahoni were
exposed to radiant heat from a conical heater, result in appearance of
a stable flame on the wood surface caused by spontaneous ignition. A
thermocouple K-type was used to measure the wood surface
temperature. Temperature histories were recorded throughout each
experiment at 1 s intervals using a TC-08. Data of first ignition time
and temperature, end ignition time and temperature, and charring rate
have been successfully collected. It was found that the ignition
temperature and charring rate depend on moisture content of wood.
Abstract: The present work presents a method of calculating the
ductility of rectangular sections of beams considering nonlinear
behavior of concrete and steel. This calculation procedure allows us
to trace the curvature of the section according to the bending
moment, and consequently deduce ductility. It also allowed us to
study the various parameters that affect the value of the ductility. A
comparison of the effect of maximum rates of tension steel, adopted
by the codes, ACI [1], EC8 [2] and RPA [3] on the value of the
ductility was made. It was concluded that the maximum rate of steels
permitted by the ACI [1] codes and RPA [3] are almost similar in
their effect on the ductility and too high. Therefore, the ductility
mobilized in case of an earthquake is low, the inverse of code EC8
[2]. Recommendations have been made in this direction.
Abstract: This paper presents the design and implements the prototype of an intelligent data processing framework in ubiquitous sensor networks. Much focus is put on how to handle the sensor data stream as well as the interoperability between the low-level sensor data and application clients. Our framework first addresses systematic middleware which mitigates the interaction between the application layer and low-level sensors, for the sake of analyzing a great volume of sensor data by filtering and integrating to create value-added context information. Then, an agent-based architecture is proposed for real-time data distribution to efficiently forward a specific event to the appropriate application registered in the directory service via the open interface. The prototype implementation demonstrates that our framework can host a sophisticated application on the ubiquitous sensor network and it can autonomously evolve to new middleware, taking advantages of promising technologies such as software agents, XML, cloud computing, and the like.
Abstract: Intelligent traffic surveillance technology is an issue in
the field of traffic data analysis. Therefore, we need the technology to
detect moving objects in real-time while there are variations in background and natural light. In this paper, we proposed a Weighted-Center Surround Difference
method for object detection in outdoor environments. The proposed system detects objects using the saliency map that is obtained by
analyzing the weight of each layers of Gaussian pyramid. In order to validate the effectiveness of our system, we implemented the proposed
method using a digital signal processor, TMS320DM6437.
Experimental results show that blurred noisy around objects was effectively eliminated and the object detection accuracy is improved.
Abstract: Biomimicry has many potential benefits as many
technologies found in nature are superior to their man-made
counterparts. As technological device components approach the micro
and nanoscale, surface properties such as surface adhesion and friction
may need to be taken into account. Lowering surface adhesion by
manipulating chemistry alone might no longer be sufficient for such
components and thus physical manipulation may be required.
Adhesion reduction is only one of the many surface functions
displayed by micro/nano-structured cuticles of insects. Here, we
present a mini review of our understanding of insect cuticle structures
and the relationship between the structure dimensions and the
corresponding functional mechanisms. It may be possible to introduce
additional properties to material surfaces (indeed multi-functional
properties) based on the design of natural surfaces.