Abstract: This paper discusses the designing of knowledge
integration of clinical information extracted from distributed medical
ontologies in order to ameliorate a machine learning-based multilabel
coding assignment system. The proposed approach is
implemented using a decision tree technique of the machine learning
on the university hospital data for patients with Coronary Heart
Disease (CHD). The preliminary results obtained show a satisfactory
finding that the use of medical ontologies improves the overall
system performance.
Abstract: Fungal infections are becoming more common and the
range of susceptible individuals has expanded. While Candida
albicans remains the most common infective species, other Candida
spp. are becoming increasingly significant. In a range of large-scale
studies of candidaemia between 1999 and 2006, about 52% of 9717
cases involved C. albicans, about 30% involved either C. glabrata or
C. parapsilosis and less than 15% involved C. tropicalis, C. krusei or
C. guilliermondii. However, the probability of mortality within 30
days of infection with a particular species was at least 40% for C.
tropicalis, C. albicans, C. glabrata and C. krusei and only 22% for
C. parapsilopsis. Clinical isolates of Candida spp. grew at rates
ranging from 1.65 h-1 to 4.9 h-1. Three species (C. krusei, C. albicans
and C. glabrata) had relatively high growth rates (μm > 4 h-1), C.
tropicalis and C. dubliniensis grew moderately quickly (Ôëê 3 h-1) and
C. parapsilosis and C. guilliermondii grew slowly (< 2 h-1). Based
on these data, the log of the odds of mortality within 30 days of
diagnosis was linearly related to μm. From this the underlying
probability of mortality is 0.13 (95% CI: 0.10-0.17) and it increases
by about 0.09 ± 0.02 for each unit increase in μm. Given that the
overall crude mortality is about 0.36, the growth of Candida spp.
approximately doubles the rate, consistent with the results of larger
case-matched studies of candidaemia.
Abstract: In this study, rotating flexible shaft-disk system
having flexible beams is considered as a dynamic system. After
neglecting nonlinear terms, torsional vibration of the shaft-disk
system and lateral and longitudinal vibration of the flexible beam are
still coupled through the motor speed. The system has three natural
frequencies; the flexible shaft-disk system torsional natural
frequency, the flexible beam lateral and longitudinal natural
frequencies. Eigenvalue calculations show that while the shaft speed
changes, torsional natural frequency of the shaft-disk system and the
beam longitudinal natural frequency are not changing but the beam
lateral natural frequency changes. Beam lateral natural frequency
stays the same as the nonrotating beam lateral natural frequency ωb
until the motor speed ωm is equal to ωb. After then ωb increases and
remains equal to the motor speed ωm until the motor speed is equal to
the shaft-disk system natural frequency ωT. Then the beam lateral
natural frequency ωb becomes equal to the natural frequency ωT and
stays same while the motor speed ωm is increased. Modal amplitudes
and phase angles of the vibrations are also plotted against the motor
speed ωm.
Abstract: IETF defines mobility support in IPv6, i.e. MIPv6, to
allow nodes to remain reachable while moving around in the IPv6
internet. When a node moves and visits a foreign network, it is still
reachable through the indirect packet forwarding from its home
network. This triangular routing feature provides node mobility but
increases the communication latency between nodes. This deficiency
can be overcome by using a Binding Update (BU) scheme, which let
nodes keep up-to-date IP addresses and communicate with each other
through direct IP routing. To further protect the security of BU, a
Return Routability (RR) procedure was developed. However, it has
been found that RR procedure is vulnerable to many attacks. In this
paper, we will propose a lightweight RR procedure based on
geometric computing. In consideration of the inherent limitation of
computing resources in mobile node, the proposed scheme is
developed to minimize the cost of computations and to eliminate the
overhead of state maintenance during binding updates. Compared with
other CGA-based BU schemes, our scheme is more efficient and
doesn-t need nonce tables in nodes.
Abstract: The main objective of this paper is to analyse the influence of preparation and control of orders on performance. The focused activities explored in this research are: procurement, production and distribution. These changes in performance were obtained through improvement of the supply chain. It is proved using all the company activities that it is possible to increase de efficiency and do services in an adequate way, placing the products in the market efficiently. For that, it was explored the importance of the supply chain, with privilege to the practical environment and the quantification of the obtained results.
Abstract: There are several approaches for handling multiclass classification. Aside from one-against-one (OAO) and one-against-all (OAA), hierarchical classification technique is also commonly used. A binary classification tree is a hierarchical classification structure that breaks down a k-class problem into binary sub-problems, each solved by a binary classifier. In each node, a set of classes is divided into two subsets. A good class partition should be able to group similar classes together. Many algorithms measure similarity in term of distance between class centroids. Classes are grouped together by a clustering algorithm when distances between their centroids are small. In this paper, we present a binary classification tree with tuned observation-based clustering (BCT-TOB) that finds a class partition by performing clustering on observations instead of class centroids. A merging step is introduced to merge any insignificant class split. The experiment shows that performance of BCT-TOB is comparable to other algorithms.
Abstract: For stable bipedal gait generation on the level floor,
efficient restoring of mechanical energy lost by heel collision at
the ground is necessary. Parametric excitation principle is one of
the solutions. We dealt with the robot-s total center of mass as
an inverted pendulum to consider the total dynamics of the robot.
Parametrically excited walking requires the use of continuous target
trajectory that is close to discontinuous optimal trajectory. In this
paper, we proposed the new target trajectory based on a position
in the walking direction. We surveyed relations between walking
performance and the parameters that form the target trajectory via
numerical simulations. As a result, it was found that our target
trajectory has the similar characteristics of a parametrically excited
inverted pendulum.
Abstract: This study presents a new approach based on Tanaka's
fuzzy linear regression (FLP) algorithm to solve well-known power
system economic load dispatch problem (ELD). Tanaka's fuzzy linear
regression (FLP) formulation will be employed to compute the
optimal solution of optimization problem after linearization. The
unknowns are expressed as fuzzy numbers with a triangular
membership function that has middle and spread value reflected on
the unknowns. The proposed fuzzy model is formulated as a linear
optimization problem, where the objective is to minimize the sum of
the spread of the unknowns, subject to double inequality constraints.
Linear programming technique is employed to obtain the middle and
the symmetric spread for every unknown (power generation level).
Simulation results of the proposed approach will be compared with
those reported in literature.
Abstract: Information sharing and exchange, rather than
information processing, is what characterizes information
technology in the 21st century. Ontologies, as shared common
understanding, gain increasing attention, as they appear as the
most promising solution to enable information sharing both at
a semantic level and in a machine-processable way. Domain
Ontology-based modeling has been exploited to provide
shareability and information exchange among diversified,
heterogeneous applications of enterprises.
Contextual ontologies are “an explicit specification of
contextual conceptualization". That is: ontology is
characterized by concepts that have multiple representations
and they may exist in several contexts. Hence, contextual
ontologies are a set of concepts and relationships, which are
seen from different perspectives. Contextualization is to allow
for ontologies to be partitioned according to their contexts.
The need for contextual ontologies in enterprise modeling
has become crucial due to the nature of today's competitive
market. Information resources in enterprise is distributed and
diversified and is in need to be shared and communicated
locally through the intranet and globally though the internet.
This paper discusses the roles that ontologies play in an
enterprise modeling, and how ontologies assist in building a
conceptual model in order to provide communicative and
interoperable information systems. The issue of enterprise
modeling based on contextual domain ontology is also
investigated, and a framework is proposed for an enterprise
model that consists of various applications.
Abstract: This paper presents a experiment to estimate the
influences of cutting conditions in microstructure changes of
machining austenitic 304 stainless steel, especially for wear insert. The
wear insert were prefabricated with a width of 0.5 mm. And the forces,
temperature distribution, RS, and microstructure changes were
measured by force dynamometer, infrared thermal camera, X-ray
diffraction, XRD, SEM, respectively. The results told that the different
combinations of machining condition have a significant influence on
machined surface microstructure changes. In addition to that, the
ANOVA and AOMwere used to tell the different influences of cutting
speed, feed rate, and wear insert.
Abstract: Heat-inducible gene expression vectors are useful for hyperthermia-induced cancer gene therapy, because the combination
of hyperthermia and gene therapy can considerably improve the therapeutic effects. In the present study, we developed an enhanced
heat-inducible transgene expression system in which a heat-shock
protein (HSP) promoter and tetracycline-responsive transactivator
were combined. When the transactivator plasmid containing the
tetracycline-responsive transactivator gene was co-transfected with
the reporter gene expression plasmid, a high level of heat-induced gene expression was observed compared with that using the HSP
promoter without the transactivator. In vitro evaluation of the
therapeutic effect using HeLa cells showed that heat-induced therapeutic gene expression caused cell death in a high percentage of
these cells, indicating that this strategy is promising for cancer gene therapy.
Abstract: This study examines the possibility to apply the theory of multidimensional accounting (momentum accounting) in a Brazilian Navy-s Services Provider Military Organization (Organização Militar Prestadora de Serviços - OMPS). In general, the core of the said theory is the fact that Accounting does not recognize the inertia of transactions occurring in an entity, and that occur repeatedly in some cases, regardless of the implementation of new actions by its managers. The study evaluates the possibility of greater use of information recorded in the financial statements of the unit of analysis, within the strategic decisions of the organization. As a research strategy, we adopted the case study. The results infer that it is possible to use the theory in the context of a multidimensional OMPS, promoting useful information for decision-making and thereby contributing to the strengthening of the necessary alignment of its administration with the current desires of the Brazilian society.
Abstract: High quality requirements analysis is one of the most
crucial activities to ensure the success of a software project, so that
requirements verification for software system becomes more and more
important in Requirements Engineering (RE) and it is one of the most
helpful strategies for improving the quality of software system.
Related works show that requirement elicitation and analysis can be
facilitated by ontological approaches and semantic web technologies.
In this paper, we proposed a hybrid method which aims to verify
requirements with structural and formal semantics to detect
interactions. The proposed method is twofold: one is for modeling
requirements with the semantic web language OWL, to construct a
semantic context; the other is a set of interaction detection rules which
are derived from scenario-based analysis and represented with
semantic web rule language (SWRL). SWRL based rules are working
with rule engines like Jess to reason in semantic context for
requirements thus to detect interactions. The benefits of the proposed
method lie in three aspects: the method (i) provides systematic steps
for modeling requirements with an ontological approach, (ii) offers
synergy of requirements elicitation and domain engineering for
knowledge sharing, and (3)the proposed rules can systematically assist
in requirements interaction detection.
Abstract: The effect of wheat flour extraction rates on flour
composition, farinographic characteristics and the quality of
sourdough naans was investigated. The results indicated that by
increasing the extraction rate, the amount of protein, fiber, fat and
ash increased, whereas moisture content decreased. Farinographic
characteristic like water absorption and dough development time
increased with an increase in flour extraction rate but the dough
stabilities and tolerance indices were reduced with an increase in
flour extraction rates. Titratable acidity for both sourdough and
sourdough naans also increased along with flour extraction rate. The
study showed that overall quality of sourdough naans were affected
by both flour extraction rate and starter culture used. Sensory
analysis of sourdough naans revealed that desirable extraction rate
for sourdough naan was 76%.
Abstract: In this study, the effect of nanofluids on the pool film
boiling was experimentally investigated at saturated condition under
atmospheric pressure. For this purpose, four different water-based
nanofluids (Al2O3, SiO2, TiO2 and CuO) with 0.1% particle volume
fraction were prepared. To investigate the boiling heat transfer, a
cylindrical rod with high temperature was used. The rod heated up to
high temperatures was immersed into nanofluids. The center
temperature of rod during the cooling process was recorded by using
a K-type thermocouple. The quenching curves showed that the pool
boiling heat transfer was strongly dependent on the nanoparticle
materials. During the repetitive quenching tests, the cooling time
decreased and thus, the film boiling vanished. Consequently, the
primary reason of this was the change of the surface characteristics
due to the nanoparticles deposition on the rod-s surface.
Abstract: Groundwater has become the most dependable source
of fresh water for agriculture, domestic and industrial uses in the past
few decades. This wide use of groundwater if left uncontrolled and
unseen will lead to overexploitation causing sea water intrusion in the
coastal areas and illegal water marketing. Several Policies and Acts
have been enacted to regulate and manage the use of this valuable
resource. In spite of this the over extraction of groundwater beyond
the recharging capacity of aquifers and depletion in the quality of
groundwater is continuing. The current study aims at reviewing the
Acts and Policies existing in the State of Tamil Nadu and in the
National level regarding groundwater regulation and management.
Further an analysis is made on the rights associated with the usage of
groundwater resources and the gaps in these policies have been
analyzed. Some suggestions are made to reform the existing
groundwater policies for better management and regulation of the
resource.
Abstract: The object of this research is the design and
evaluation of an immersive Virtual Learning Environment (VLE) for
deaf children. Recently we have developed a prototype immersive
VR game to teach sign language mathematics to deaf students age K-
4 [1] [2]. In this paper we describe a significant extension of the
prototype application. The extension includes: (1) user-centered
design and implementation of two additional interactive
environments (a clock store and a bakery), and (2) user-centered
evaluation including development of user tasks, expert panel-based
evaluation, and formative evaluation. This paper is one of the few to
focus on the importance of user-centered, iterative design in VR
application development, and to describe a structured evaluation
method.
Abstract: Recently studies in area of supply chain network
(SCN) have focused on the disruption issues in distribution systems.
Also this paper extends the previous literature by providing a new biobjective
model for cost minimization of designing a three echelon
SCN across normal and failure scenarios with considering multi
capacity option for manufacturers and distribution centers. Moreover,
in order to solve the problem by means of LINGO software, novel
model will be reformulated through a branch of LP-Metric method
called Min-Max approach.
Abstract: This paper describes an optimal approach for feature
subset selection to classify the leaves based on Genetic Algorithm
(GA) and Kernel Based Principle Component Analysis (KPCA). Due
to high complexity in the selection of the optimal features, the
classification has become a critical task to analyse the leaf image
data. Initially the shape, texture and colour features are extracted
from the leaf images. These extracted features are optimized through
the separate functioning of GA and KPCA. This approach performs
an intersection operation over the subsets obtained from the
optimization process. Finally, the most common matching subset is
forwarded to train the Support Vector Machine (SVM). Our
experimental results successfully prove that the application of GA
and KPCA for feature subset selection using SVM as a classifier is
computationally effective and improves the accuracy of the classifier.
Abstract: This research deals with techno economic analysis to select the most economic desalination method for Asalouyeh combined cycle power plant . Due to lack of fresh water, desalination of sea water is necessary to provide required DM water of Power Plant. The most common desalination methods are RO, MSF, MED, and MED–TVC. In this research, methods of RO, MED, and MED– TVC have been compared. Simulation results show that recovery of heat of exhaust gas of main stack is optimum case for providing DM water required for injected steam of MED desalination. This subject is very important because of improving thermal efficiency of power plant using extra heat recovery. Also, it has been shown that by adding 3 rows of finned tube to de-aerator evaporator, which is very simple and low cost, required steam for generating 5200 m3/day of desalinated water is obtainable.