Abstract: Because of architectural condition and structure application, sometimes mass source and stiffness source are not coincidence, and the structure is irregular. The structure is also might be asymmetric as an asymmetric bracing in plan which leads to unbalance distribution of stiffness or because of unbalance distribution of the mass. Both condition lead to eccentricity and torsion in the structure. The deficiency of ordinary code to evaluate the performance of steel structures against earthquake has been caused designing based on performance level or capacity spectrum be used. By using the mentioned methods it is possible to design a structure that its behavior against different earthquakes be predictive. In this article 5- story buildings with different percentage of asymmetric which is because of stiffness changes and kind of bracing (x and chevron bracing) have been designed. The static and dynamic nonlinear analysis under three acceleration recording has been done. Finally performance level of the structure has been evaluated.
Abstract: Considering the serious health hazards of air pollutants from automobiles, the present study was aimed to estimate the genotoxic/tumor inducing potential of three soil samples collected from junctions of Bus stand (BS), Crystal (CT) and Railway station (RS) of Amritsar, Punjab (India) using Allium cepa root chromosomal aberration assay (AlRCAA) and potato disc tumor assay (PDTA). The genotoxic potential in AlRCAA was 41.27% and 41.26% for BS; 37.89% and 43.38% for RS and 33.76% and 37.83% for CT during in situ and root dip treatments, respectively. The maximum number of tumors were induced in RS sample (64) followed by BS (21) and CT (9) during PDTA. The physicochemical parameters of soil sample were also studied and the concentration of lead was found to be 95.21 mg/Kg in RS, 35.30 mg/Kg in BS and 24.59 mg/Kg in CT samples.
Abstract: Due to the growth of the urban area towards lands
contaminated with ancient tails, in this work we evaluated if the
leaching with calcium thiosulfate (CaS2O3) for the recovery of silver,
gold and mercury from this soil, also dissolves arsenic, cadmium and
lead; for this, we determined their quantity per each fraction of size
of particle of the soil before and after the dissolution. Half of the soil
samples were leached in the plant Beneficiadora de Jales del Centro,
S. A. de C.V. and the rest of them remained in the laboratory. The
ICP-OES technique was used to determine the amounts of arsenic,
cadmium and lead, in the samples of both lots. The soil samples were
collected in a neighboring area at El Lampotal, Vetagrande,
Zacatecas, México, with an extension of 600 m2 at 22º52' 37.69'' N,
102º25' 11.73'' W. The amount of arsenic, cadmium and lead found
in nonleached soil and for a particle size of 47 μm was 203.72±3.73,
33.63±1.31 and 3480.99±20.4 mg/kg respectively.
Abstract: In the context of spectrum surveillance, a new method
to recover the code of spread spectrum signal is presented, while the
receiver has no knowledge of the transmitter-s spreading sequence. In
our previous paper, we used Genetic algorithm (GA), to recover
spreading code. Although genetic algorithms (GAs) are well known
for their robustness in solving complex optimization problems, but
nonetheless, by increasing the length of the code, we will often lead
to an unacceptable slow convergence speed. To solve this problem we
introduce Particle Swarm Optimization (PSO) into code estimation in
spread spectrum communication system. In searching process for
code estimation, the PSO algorithm has the merits of rapid
convergence to the global optimum, without being trapped in local
suboptimum, and good robustness to noise. In this paper we describe
how to implement PSO as a component of a searching algorithm in
code estimation. Swarm intelligence boasts a number of advantages
due to the use of mobile agents. Some of them are: Scalability, Fault
tolerance, Adaptation, Speed, Modularity, Autonomy, and
Parallelism. These properties make swarm intelligence very attractive
for spread spectrum code estimation. They also make swarm
intelligence suitable for a variety of other kinds of channels. Our
results compare between swarm-based algorithms and Genetic
algorithms, and also show PSO algorithm performance in code
estimation process.
Abstract: This paper describes a paradigmatic approach to develop architecture of secure systems by describing the requirements from four different points of view: that of the owner, the administrator, the user, and the network. Deriving requirements and developing architecture implies the joint elicitation and describing the problem and the structure of the solution. The view points proposed in this paper are those we consider as requirements towards their contributions as major parties in the design, implementation, usage and maintenance of secure systems. The dramatic growth of the technology of Internet and the applications deployed in World Wide Web have lead to the situation where the security has become a very important concern in the development of secure systems. Many security approaches are currently being used in organizations. In spite of the widespread use of many different security solutions, the security remains a problem. It is argued that the approach that is described in this paper for the development of secure architecture is practical by all means. The models representing these multiple points of view are termed the requirements model (views of owner and administrator) and the operations model (views of user and network). In this paper, this multiple view paradigm is explained by first describing the specific requirements and or characteristics of secure systems (particularly in the domain of networks) and the secure architecture / system development methodology.
Abstract: In recent years, “Bottom-up Planning Approach" has been widely accepted and expanded from planning theorists. Citizen participation becomes more important in decision-making in informal settlements. Many of previous projects and strategies due to ignorance of citizen participation, have been failed facing with informal settlements and in some cases lead physical expansion of these neighbourhoods. According to recent experiences, the new participatory approach was in somehow successful. This paper focuses on local experiences in Iran. A considerable amount of people live in informal settlements in Iran. With the previous methods, the government could not solve the problems of these settlements. It is time to examine new methods such as empowerment of the local citizens and involve them to solve the current physical, social, and economic problems. The paper aims to address the previous and new strategies facing with informal settlements, the conditions under which citizens could be involved in planning process, limits and potentials of this process, the main actors and issues and finally motivations that are able to promote citizen participation. Documentary studies, observation, interview and questionnaire have been used to achieve the above mentioned objectives. Nearly 80 percent of responder in Saadi Community are ready to participate in regularising their neighbourhoods, if pre-conditions of citizen involvement are being provided. These pre-conditions include kind of problem and its severity, the importance of issue, existence of a short-term solution, etc. Moreover, confirmation of dweller-s ownership can promote the citizen engagement in participatory projects.
Abstract: Point quad tree is considered as one of the most
common data organizations to deal with spatial data & can be used to
increase the efficiency for searching the point features. As the
efficiency of the searching technique depends on the height of the
tree, arbitrary insertion of the point features may make the tree
unbalanced and lead to higher time of searching. This paper attempts
to design an algorithm to make a nearly balanced quad tree. Point
pattern analysis technique has been applied for this purpose which
shows a significant enhancement of the performance and the results
are also included in the paper for the sake of completeness.
Abstract: The main aims in this research are to study the solid
waste generation in the Faculty of Engineering and Built
Environment in the UKM and at the same time to determine
composition and some of the waste characteristics likewise: moisture
content, density, pH and C/N ratio. For this purpose multiple
campaigns were conducted to collect the wastes produced in all
hostels, faculties, offices and so on, during 24th of February till 2nd
of March 2009, measure and investigate them with regard to both
physical and chemical characteristics leading to highlight the
necessary management policies. Research locations are Faculty of
Engineering and the Canteen nearby that. From the result gained, the
most suitable solid waste management solution will be proposed to
UKM. The average solid waste generation rate in UKM is 203.38
kg/day. The composition of solid waste generated are glass, plastic,
metal, aluminum, organic and inorganic waste and others waste.
From the laboratory result, the average moisture content, density, pH
and C/N ratio values from the solid waste generated are 49.74%,
165.1 kg/m3, 5.3, and 7:1 respectively. Since, the food waste (organic
waste) were the most dominant component, around 62% from the
total waste generated hence, the most suitable solid waste
management solution is composting.
Abstract: In this paper, the babbitting of a bearing in boiler feed pump of an electromotor has been studied. These bearings have an important role in reducing the shut down times in the pumps, compressors and turbines. The most conventional method in babbitting is casting as a melting method. The comparison between thermal spray and casting methods in babbitting shows that the thermal spraying babbitt layer has better performance and tribological behavior. The metallurgical and tribological analysis such as SEM, EDS and wet chemical analysis has been made in the Babbitt alloys and worn surfaces. Two type of babbitt materials: tinbase and lead-base babbitt was used. The benefits of thermally sprayed babbitt layers are completely clear especially in large bearings.
Abstract: Innovations, especially technological, are considered
key-drivers for sustainable economic growth and competitiveness in
the globalised world. As such they should also play an important role
in the process of economical convergence inside the EU.
Unfortunately, the problem of insufficient innovation performance
concerns around half of the EU countries. Poland shows that a lack of
a consistent high-tech financing system constitutes a serious obstacle
for the development of innovative firms. In this article we will
evaluate these questions referring to the example of Ammono S.A., a
Polish company established to develop and commercialise an original
technology for the production of bulk GaN crystals. We will focus on
its efforts to accumulate the financial resources necessary at different
stages of its development. The purpose of this article is to suggest
possible ways to improve the national innovative system, which
would make it more competent in generating high-tech leaders.
Abstract: Nowadays, efficiency, effectiveness and economy are regarded as the main objectives of managers and the secret of the continuity of an organization in competing economy. In such competing settings, it is essential that the management of an organization has not been neglected and been obliged to identify quickly the opportunities for improving the operation of organization and remove the shortcomings of their managed system in order to use the opportunities for development. Operational auditing is a useful tool for system adjustment and leading an organization toward its objectives. Operational auditing is indeed a viewpoint which identifies the causes of insufficiencies, weaknesses and deficiencies of system and plans to eliminate them. Operational auditing is useful in the effectiveness and optimization of executive managers- decisions and increasing the efficiency and economy of their performance in the future and prevents the waste and incorrect use of resources. Evidence shows that operational auditing is used at a limited level in Iran. This matter raises some questions like the following ones in the minds. Why do a limited number of corporations use operational auditing? Which factors can guarantee its full implementation? What obstacles are there in its implementation? The purpose of this article is to determine executive objectives, the operation domain of operational auditing, the components of operational auditing and the executive obstacles to operational auditing in Iran.
Abstract: In this paper, FinFET devices are analyzed with
emphasis on sub-threshold leakage current control. This is achieved
through proper biasing of the back gate, and through the use of
asymmetric work functions for the four terminal FinFET devices. We
are also examining different configurations of multiplexers and XOR
gates using transistors of symmetric and asymmetric work functions.
Based on extensive characterization data for MUX circuits, our
proposed configuration using symmetric devices lead to leakage
current and delay improvements of 65% and 47% respectively
compared to results in the literature. For XOR gates, a 90%
improvement in the average leakage current is achieved by using
asymmetric devices. All simulations are based on a 25nm FinFET
technology using the University of Florida UFDG model.
Abstract: There are two major variants of the Simplex
Algorithm: the revised method and the standard, or tableau method.
Today, all serious implementations are based on the revised method
because it is more efficient for sparse linear programming problems.
Moreover, there are a number of applications that lead to dense linear
problems so our aim in this paper is to present some computational
results on parallel implementation of dense Simplex Method. Our
implementation is implemented on a SMP cluster using C
programming language and the Message Passing Interface MPI.
Preliminary computational results on randomly generated dense
linear programs support our results.
Abstract: Permeability reduction induced by asphaltene
precipitation during gas injection is one of the serious problems in
the oil industry. This problem can lead to formation damage and
decrease the oil production rate. In this work, Malaysian light oil
sample has been used to investigate the effect CO2 injection and
Water Alternating Gas (WAG) injection on permeability reduction.
In this work, dynamic core flooding experiments were conducted to
study the effect of CO2 and WAG injection on the amount of
asphaltene precipitated. Core properties after displacement were
inspected for any permeability reduction to study the effect of
asphaltene precipitation on rock properties.
The results showed that WAG injection gave less asphaltene
precipitation and formation damage compared to CO2 injection. The
study suggested that WAG injection can be one of the important
factors of managing asphaltene precipitation.
Abstract: Mankind has entered into an extremely complex and
controversial stage of its development: the world is simultaneously
organized and chaoticized, globalized and localized, combined and
split. Analysts point out that globalization as a process of
strengthening economic, cultural, financial and other ties of states
cause many problems. In the economic sphere, it creates the danger
of growing gap between the states, in the sphere of politics it leads to
the weakening of political power and influence of nation-states.
Abstract: To understand working features of a micro combustor,
a computer code has been developed to study combustion of
hydrogen–air mixture in a series of chambers with same shape aspect
ratio but various dimensions from millimeter to micrometer level.
The prepared algorithm and the computer code are capable of
modeling mixture effects in different fluid flows including chemical
reactions, viscous and mass diffusion effects. The effect of various
heat transfer conditions at chamber wall, e.g. adiabatic wall, with
heat loss and heat conduction within the wall, on the combustion is
analyzed. These thermal conditions have strong effects on the
combustion especially when the chamber dimension goes smaller and
the ratio of surface area to volume becomes larger.
Both factors, such as larger heat loss through the chamber wall
and smaller chamber dimension size, may lead to the thermal
quenching of micro-scale combustion. Through such systematic
numerical analysis, a proper operation space for the micro-combustor
is suggested, which may be used as the guideline for microcombustor
design. In addition, the results reported in this paper
illustrate that the numerical simulation can be one of the most
powerful and beneficial tools for the micro-combustor design,
optimization and performance analysis.
Abstract: Human genome is not only the evolutionary
summation of all advantageous events, but also houses lesions of
deleterious foot prints. A single gene mutation sometimes may
express multiple consequences in numerous tissues and a linear
relationship of the genotype and the phenotype may often be obscure.
ß Thalassemia minor, a transfusion independent mild anaemia,
coupled with environment among other factors may articulate into
phenotypic pleotropy with Hypocholesterolemia, Vitamin D
deficiency, Tissue hypoxia, Hyper-parathyroidism and Psychological
alterations. Occurrence of Pancreatic insufficiency, resultant
steatorrhoea, Vitamin-D (25-OH) deficiency (13.86 ngm/ml) with
Hypocholesterolemia (85mg/dl) in a 30 years old male ß Thal-minor
patient (Hemoglobin 11mg/dl with Fetal Hemoglobin 2.10%, Hb A2
4.60% and Hb Adult 84.80% and altered Hemogram) with increased
Para thyroid hormone (62 pg/ml) & moderate Serum Ca+2
(9.5mg/ml) indicate towards a cascade of phenotypic pleotropy
where the ß Thalassemia mutation ,be it in the 5’ cap site of the
mRNA , differential splicing etc in heterozygous state is effecting
several metabolic pathways. Compensatory extramedulary
hematopoiesis may not coped up well with the stressful life style of
the young individual and increased erythropoietic stress with high
demand for cholesterol for RBC membrane synthesis may have
resulted in Hypocholesterolemia.Oxidative stress and tissue hypoxia
may have caused the pancreatic insufficiency, leading to Vitamin D
deficiency. This may in turn have caused the secondary
hyperparathyroidism to sustain serum Calcium level. Irritability and
stress intolerance of the patient was a cumulative effect of the vicious
cycle of metabolic compromises. From these findings we propose
that the metabolic deficiencies in the ß Thalassemia mutations may
be considered as the phenotypic display of the pleotropy to explain
the genetic epidemiology.
According to the recommendations from the NIH Workshop on
Gene-Environment Interplay in Common Complex Diseases: Forging
an Integrative Model, study design of observations should be
informed by gene-environment hypotheses and results of a study
(genetic diseases) should be published to inform future hypotheses.
Variety of approaches is needed to capture data on all possible
aspects, each of which is likely to contribute to the etiology of
disease. Speakers also agreed that there is a need for development of
new statistical methods and measurement tools to appraise
information that may be missed out by conventional method where
large sample size is needed to segregate considerable effect.
A meta analytic cohort study in future may bring about significant
insight on to the title comment.
Abstract: In this paper, we study the application of Extreme
Learning Machine (ELM) algorithm for single layered feedforward
neural networks to non-linear chaotic time series problems. In this
algorithm the input weights and the hidden layer bias are randomly
chosen. The ELM formulation leads to solving a system of linear
equations in terms of the unknown weights connecting the hidden
layer to the output layer. The solution of this general system of
linear equations will be obtained using Moore-Penrose generalized
pseudo inverse. For the study of the application of the method we
consider the time series generated by the Mackey Glass delay
differential equation with different time delays, Santa Fe A and
UCR heart beat rate ECG time series. For the choice of sigmoid,
sin and hardlim activation functions the optimal values for the
memory order and the number of hidden neurons which give the
best prediction performance in terms of root mean square error are
determined. It is observed that the results obtained are in close
agreement with the exact solution of the problems considered
which clearly shows that ELM is a very promising alternative
method for time series prediction.
Abstract: This paper deals with the problem of thermal and
mechanical shocks, which rising during operation, mostly at
interrupted cut. Here will be solved their impact on the cutting edge
tool life, the impact of coating technology on resistance to shocks
and experimental determination of tool life in heating flame.
Resistance of removable cutting edges against thermal and
mechanical shock is an important indicator of quality as well as its
abrasion resistance. Breach of the edge or its crumble may occur due
to cyclic loading. We can observe it not only during the interrupted
cutting (milling, turning areas abandoned hole or slot), but also in
continuous cutting. This is due to the volatility of cutting force on
cutting. Frequency of the volatility in this case depends on the type
of rising chips (chip size element). For difficult-to-machine materials
such as austenitic steel particularly happened at higher cutting speeds
for the localization of plastic deformation in the shear plane and for
the inception of separate elements substantially continuous chips.
This leads to variations of cutting forces substantially greater than for
other types of steel.
Abstract: In this paper, we consider the control of time delay system
by Proportional-Integral (PI) controller. By Using the Hermite-
Biehler theorem, which is applicable to quasi-polynomials, we seek
a stability region of the controller for first order delay systems. The
essence of this work resides in the extension of this approach to
second order delay system, in the determination of its stability region
and the computation of the PI optimum parameters. We have used
the genetic algorithms to lead the complexity of the optimization
problem.