Abstract: Instead of traditional (nominal) classification we investigate
the subject of ordinal classification or ranking. An enhanced
method based on an ensemble of Support Vector Machines (SVM-s)
is proposed. Each binary classifier is trained with specific weights
for each object in the training data set. Experiments on benchmark
datasets and synthetic data indicate that the performance of our
approach is comparable to state of the art kernel methods for
ordinal regression. The ensemble method, which is straightforward
to implement, provides a very good sensitivity-specificity trade-off
for the highest and lowest rank.
Abstract: The rapid pace of technological advancement and its
consequential widening digital divide has resulted in the
marginalization of the disabled especially the communication
challenged. The dearth of suitable technologies for the development
of assistive technologies has served to further marginalize the
communications challenged user population and widen this chasm
even further. Given the varying levels of disability there and its
associated requirement for customized solution based. This paper
explains the use of a Software Development Kits (SDK) for the
bridging of this communications divide through the use of industry
poplar communications SDKs towards identification of requirements
for communications challenged users as well as identification of
appropriate frameworks for future development initiatives.
Abstract: Road industry has challenged the prospect of ecoconstruction. Pavements may fit within the framework of sustainable development. Hence, research implements assessments of conventional pavements impacts on environment in use of life cycle approach. To meet global, and often national, targets on pollution control, newly introduced pavement designs are under study. This is the case of Cyprus demonstration, which occurred within EcoLanes project work. This alternative pavement differs on concrete layer reinforced with tire recycling product. Processing of post-consumer tires produces steel fibers improving strength capacity against cracking. Thus maintenance works are relevantly limited in comparison to flexible pavement. This enables to be more ecofriendly, referenced to current study outputs. More specific, proposed concrete pavement life cycle processes emits 15 % less air pollutants and consumes 28 % less embodied energy than those of the asphalt pavement. In addition there is also a reduction on costs by 0.06 %.
Abstract: Automatic methods of detecting changes through
satellite imaging are the object of growing interest, especially
beca²use of numerous applications linked to analysis of the Earth’s
surface or the environment (monitoring vegetation, updating maps,
risk management, etc...). This work implemented spatial analysis
techniques by using images with different spatial and spectral
resolutions on different dates. The work was based on the principle
of control charts in order to set the upper and lower limits beyond
which a change would be noted. Later, the a contrario approach was
used. This was done by testing different thresholds for which the
difference calculated between two pixels was significant. Finally,
labeled images were considered, giving a particularly low difference
which meant that the number of “false changes” could be estimated
according to a given limit.
Abstract: The study identified the sources of production
inefficiency of the farming sector in district Faisalabad in the Punjab
province of Pakistan. Data Envelopment Analysis (DEA) technique
was utilized at farm level survey data of 300 farmers for the year
2009. The overall mean efficiency score was 0.78 indicating 22
percent inefficiency of the sample farmers. Computed efficiency
scores were then regressed on farm specific variables using Tobit
regression analysis. Farming experience, education, access to
farming credit, herd size and number of cultivation practices showed
constructive and significant effect on the farmer-s technical
efficiency.
Abstract: In the semiconductor manufacturing process, large
amounts of data are collected from various sensors of multiple
facilities. The collected data from sensors have several different characteristics
due to variables such as types of products, former processes
and recipes. In general, Statistical Quality Control (SQC) methods
assume the normality of the data to detect out-of-control states of
processes. Although the collected data have different characteristics,
using the data as inputs of SQC will increase variations of data,
require wide control limits, and decrease performance to detect outof-
control. Therefore, it is necessary to separate similar data groups
from mixed data for more accurate process control. In the paper,
we propose a regression tree using split algorithm based on Pearson
distribution to handle non-normal distribution in parametric method.
The regression tree finds similar properties of data from different
variables. The experiments using real semiconductor manufacturing
process data show improved performance in fault detecting ability.
Abstract: The aim of this article is to assess the existing
business models used by the banks operating in the CEE countries in
the time period from 2006 till 2011.
In order to obtain research results, the authors performed
qualitative analysis of the scientific literature on bank business
models, which have been grouped into clusters that consist of such
components as: 1) capital and reserves; 2) assets; 3) deposits, and 4)
loans.
In their turn, bank business models have been developed based on
the types of core activities of the banks, and have been divided into
four groups: Wholesale, Investment, Retail and Universal Banks.
Descriptive statistics have been used to analyse the models,
determining mean, minimal and maximal values of constituent
cluster components, as well as standard deviation. The analysis of
the data is based on such bank variable indices as Return on Assets
(ROA) and Return on Equity (ROE).
Abstract: This research was to study a comparison of inspector-s performance between regular and complex visual inspection task. Visual task was simulated on DVD read control circuit. Inspection task was performed by using computer. Subjects were 10 undergraduate randomly selected and test for 20/20. Then, subjects were divided into two groups, five for regular inspection (control group) and five for complex inspection (treatment group) tasks. Result was showed that performance on regular and complex inspectors was significantly difference at the level of 0.05. Inspector performance on regular inspection was showed high percentage on defects detected by using equal time to complex inspection. This would be indicated that inspector performance was affected by visual inspection task.
Abstract: 2007 is a jubilee year: in 1967, programming language SIMULA 67 was presented, which contained all aspects of what was later called object-oriented programming. The present paper contains a description of the development unto the objectoriented programming, the role of simulation in this development and other tools that appeared in SIMULA 67 and that are nowadays called super-object-oriented programming.
Abstract: The extensive number of engineering drawing will be referred for planning process and the changes will produce a good engineering design to meet the demand in producing a new model. The advantage in reuse of engineering designs is to allow continuous product development to further improve the quality of product development, thus reduce the development costs. However, to retrieve the existing engineering drawing, it is time consuming, a complex process and are expose to errors. Engineering drawing file searching system will be proposed to solve this problem. It is essential for engineer and designer to have some sort of medium to enable them to search for drawing in the most effective way. This paper lays out the proposed research project under the area of information extraction in engineering drawing.
Abstract: A recent neurospiking coding scheme for feature extraction from biosonar echoes of various plants is examined with avariety of stochastic classifiers. Feature vectors derived are employedin well-known stochastic classifiers, including nearest-neighborhood,single Gaussian and a Gaussian mixture with EM optimization.Classifiers' performances are evaluated by using cross-validation and bootstrapping techniques. It is shown that the various classifers perform equivalently and that the modified preprocessing configuration yields considerably improved results.
Abstract: Uranium mining and processing in Brazil occur in a
northeastern area near to Caetité-BA. Several Non-Governmental
Organizations claim that uranium mining in this region is a pollutant
causing health risks to the local population,but those in charge of the
complex extraction and production of“yellow cake" for generating
fuel to the nuclear power plants reject these allegations. This study
aimed at identifying potential problems caused by mining to the
population of Caetité. In this, work,the concentrations of 238U, 232Th
and 40K radioisotopes in the teeth of the Caetité population were
determined by ICP-MS. Teeth are used as bioindicators of
incorporated radionuclides. Cumulative radiation doses in the
skeleton were also determined. The concentration values were below
0.008 ppm, and annual effective dose due to radioisotopes are below
to the reference values. Therefore, it is not possible to state that the
mining process in Caetité increases pollution or radiation exposure in
a meaningful way.
Abstract: In this research, effort was made to identify and
evaluate barriers to the development of entrepreneurship among
Iranian entrepreneur women who were graduated from universities.
In this study, perspectives of thirty-seven available entrepreneur
women were examined. In order to prepare questionnaires and
receive knowledge about barriers among these women, seven cases of
entrepreneur women took part in in-depth interviews. Then, to
evaluate the importance of barriers, the researchers made a
questionnaire with closed questions in which the barriers were
classified into the following categories: personal-familial barriers;
socio-cultural barriers; economic-financial-commercial barriers; and
structural barriers. Entrepreneur women were requested to rate the
importance of each item. The results indicated that there were
different obstacles among entrepreneur women. The order of the
important barriers was as fallow: economic-financial-commercial,
structural, socio-cultural, and personal-familial.
Abstract: This paper utilizes a finite element analysis to study
the bearing capacity of ring footings on a two-layered soil. The upper
layer, that the footing is placed on it, is soft clay and the underneath
layer is a cohesionless sand. For modeling soils, Mohr–Coulomb
plastic yield criterion is employed. The effects of two factors, the
clay layer thickness and the ratio of internal radius of the ring footing
to external radius of the ring, have been analyzed. It is found that the
bearing capacity decreases as the value of ri / ro increases.
Although, as the clay layer thickness increases the bearing capacity
was alleviated gradually.
Abstract: If organizations like Mellat Bank want to identify its
customer market completely to reach its specified goals, it can
segment the market to offer the product package to the right segment.
Our objective is to offer a segmentation model for Iran banking
market in Mellat bank view. The methodology of this project is
combined by “segmentation on the basis of four part-quality
variables" and “segmentation on the basis of different in means".
Required data are gathered from E-Systems and researcher personal
observation. Finally, the research offers the organization that at first
step form a four dimensional matrix with 756 segments using four
variables named value-based, behavioral, activity style, and activity
level, and at the second step calculate the means of profit for every
cell of matrix in two distinguished work level (levels α1:normal
condition and α2: high pressure condition) and compare the segments
by checking two conditions that are 1- homogeneity every segment
with its sub segment and 2- heterogeneity with other segments, and
so it can do the necessary segmentation process. After all, the last
offer (more explained by an operational example and feedback
algorithm) is to test and update the model because of dynamic
environment, technology, and banking system.
Abstract: Data mining incorporates a group of statistical
methods used to analyze a set of information, or a data set. It operates
with models and algorithms, which are powerful tools with the great
potential. They can help people to understand the patterns in certain
chunk of information so it is obvious that the data mining tools have
a wide area of applications. For example in the theoretical chemistry
data mining tools can be used to predict moleculeproperties or
improve computer-assisted drug design. Classification analysis is one
of the major data mining methodologies. The aim of thecontribution
is to create a classification model, which would be able to deal with a
huge data set with high accuracy. For this purpose logistic regression,
Bayesian logistic regression and random forest models were built
using R software. TheBayesian logistic regression in Latent GOLD
software was created as well. These classification methods belong to
supervised learning methods.
It was necessary to reduce data matrix dimension before construct
models and thus the factor analysis (FA) was used. Those models
were applied to predict the biological activity of molecules, potential
new drug candidates.
Abstract: The public sector losses are the major cause of stagnant growth of Pakistan. Public sector automotive manufacturing industry is one of the major contributors of these losses. This research has been carried out in order to identify the major barriers of productivity of this industry and suggest measures for improvement. This qualitative and quantitative research consisted of informal interviews, discussions augmented by closed ended questionnaire. Three major manufacturing units were chosen for this research and responses from 103 employees were collected. It was found out in this research that numerous productivity flaws exist in the system which requires immediate attention. Besides highlighting flaws this research also suggests corrective actions and areas for future research to overcome these problems.
Abstract: Evolutionary Programming (EP) represents a
methodology of Evolutionary Algorithms (EA) in which mutation is
considered as a main reproduction operator. This paper presents a
novel EP approach for Artificial Neural Networks (ANN) learning.
The proposed strategy consists of two components: the self-adaptive,
which contains phenotype information and the dynamic, which is
described by genotype. Self-adaptation is achieved by the addition of
a value, called the network weight, which depends on a total number
of hidden layers and an average number of neurons in hidden layers.
The dynamic component changes its value depending on the fitness
of a chromosome, exposed to mutation. Thus, the mutation step size
is controlled by two components, encapsulated in the algorithm,
which adjust it according to the characteristics of a predefined ANN
architecture and the fitness of a particular chromosome. The
comparative analysis of the proposed approach and the classical EP
(Gaussian mutation) showed, that that the significant acceleration of
the evolution process is achieved by using both phenotype and
genotype information in the mutation strategy.
Abstract: Particle detection in very noisy and low contrast images
is an active field of research in image processing. In this article, a
method is proposed for the efficient detection and sizing of subsurface
spherical particles, which is used for the processing of softly fused
Au nanoparticles. Transmission Electron Microscopy is used for
imaging the nanoparticles, and the proposed algorithm has been
tested with the two-dimensional projected TEM images obtained.
Results are compared with the data obtained by transmission optical
spectroscopy, as well as with conventional circular object detection
algorithms.
Abstract: In this paper, the dynamic analysis of fuel storage
tanks has been studied and some equations are presented for the
created fluid waves due to storage tank motions. Also, the equations
for finite elements of fluid and structure interactions, and boundary
conditions dominant on structure and fluid, were researched. In this
paper, a numerical simulation is performed for the dynamic analysis
of a storage tank contained a fluid. This simulation has carried out by
ANSYS software, using FSI solver (Fluid and Structure Interaction
solver), and by considering the simulated fluid dynamic motions due
to earthquake loading, based on velocities and movements of
structure and fluid according to all boundary conditions dominant on
structure and fluid.