Abstract: New Zealand-s product markets experienced a surge in
import competition beginning from the late 1970-s when its
government began to promote a policy of more open markets. This
study considers how the trade liberalization aspect of the policy may
have influenced unionization and union-organizing success. For
describing the trade liberalization, a model shows how the removal of
import tariffs can lead to countervailing influences upon the union
membership of a domestic firm. The evidence supports the prediction
that union membership has been decreased rather than increased. In
the context of debates concerning globalization, it can be said that the
power of unions has been diminished.
Abstract: Middle-gate is located in Hasankeyf, Batman dating
back to 1800 BC and is one of the important historical structures in
Turkey. The ancient structure has suffered major structural cracks
due to aging as well as lateral pressure of a cracked rock which is
predicted to be about 100 tons. The existing support system was
found to be inadequate to support the load especially after a recent
rock fall in the close vicinity. Concerns were increased since the
existing support system that is integral with a damaged and cracked
gate wall needed to be replaced by a new support system. The
replacement process must be carefully monitored by crackmeters and
control mechanisms should be integrated to prevent cracks to expand
while the same crack width needs to be maintained after the
operation. The control system and actions taken during the
intervention are explained in this paper.
Abstract: Soil mechanics is a traditional course in any
university. Management of lab classes is one of the main issues to
deliver a proper outline. In Curtin University, different methods
applied to check the efficiency of these methods. One of them was
mainly rely on demonstration and the other one mainly on involving
students in running tests. Comparison between these delivery
methods also are outlined in summary section. The recommendation
also made that the more satisfaction is reachable while the students
engaged.
Abstract: Vinegar or sour wine is a product of alcoholic and
subsequent acetous fermentation of sugary precursors derived from
several fruits or starchy substrates. This delicious food additive and
supplement contains not less than 4 grams of acetic acid in 100 cubic
centimeters at 20°C. Among the large number of bacteria that are
able to produce acetic acid, only few genera are used in vinegar
industry most significant of which are Acetobacter and
Gluconobacter. In this research we isolated and identified an
Acetobacter strain from Iranian apricot, a very delicious and sensitive
summer fruit to decay, we gathered from fruit's stores in Isfahan,
Iran. The main culture media we used were Carr, GYC, Frateur and
an industrial medium for vinegar production. We isolated this strain
using a novel miniature fermentor we made at Pars Yeema
Biotechnologists Co., Isfahan Science and Technology Town (ISTT),
Isfahan, Iran. The microscopic examinations of isolated strain from
Iranian apricot showed gram negative rods to cocobacilli. Their
catalase reaction was positive and oxidase reaction was negative and
could ferment ethanol to acetic acid. Also it showed an acceptable
growth in 5%, 7% and 9% ethanol concentrations at 30°C using
modified Carr media after 24, 48 and 96 hours incubation
respectively. According to its tolerance against high concentrations of
ethanol after four days incubation and its high acetic acid production,
8.53%, after 144 hours, this strain could be considered as a suitable
industrial strain for a production of a new type of vinegar, apricot
vinegar, with a new and delicious taste. In conclusion this is the first
report of isolation and identification of an Acetobacter strain from
Iranian apricot with a very good tolerance against high ethanol
concentrations as well as high acetic acid productivity in an
acceptable incubation period of time industrially. This strain could be
used in vinegar industry to convert apricot spoilage to a beneficiary
product and mentioned characteristics have made it as an amenable
strain in food and agricultural biotechnology.
Abstract: Among the various cooling processes in industrial
applications such as: electronic devices, heat exchangers, gas
turbines, etc. Gas turbine blades cooling is the most challenging one.
One of the most common practices is using ribbed wall because of
the boundary layer excitation and therefore making the ultimate
cooling. Vortex formation between rib and channel wall will result in
a complicated behavior of flow regime. At the other hand, selecting
the most efficient method for capturing the best results comparing to
experimental works would be a fascinating issue. In this paper 4
common methods in turbulence modeling: standard k-e, rationalized
k-e with enhanced wall boundary layer treatment, k-w and RSM
(Reynolds stress model) are employed to a square ribbed channel to
investigate the separation and thermal behavior of the flow in the
channel. Finally all results from different methods which are used in
this paper will be compared with experimental data available in
literature to ensure the numerical method accuracy.
Abstract: Over Current Relays (OCRs) and Directional Over Current Relays (DOCRs) are widely used for the radial protection and ring sub transmission protection systems and for distribution systems. All previous work formulates the DOCR coordination problem either as a Non-Linear Programming (NLP) for TDS and Ip or as a Linear Programming (LP) for TDS using recently a social behavior (Particle Swarm Optimization techniques) introduced to the work. In this paper, a Modified Particle Swarm Optimization (MPSO) technique is discussed for the optimal settings of DOCRs in power systems as a Non-Linear Programming problem for finding Ip values of the relays and for finding the TDS setting as a linear programming problem. The calculation of the Time Dial Setting (TDS) and the pickup current (Ip) setting of the relays is the core of the coordination study. PSO technique is considered as realistic and powerful solution schemes to obtain the global or quasi global optimum in optimization problem.
Abstract: While the explosive increase in information published
on the Web, researchers have to filter information when searching for
conference related information. To make it easier for users to search
related information, this paper uses Topic Maps and social information
to implement ontology since ontology can provide the formalisms and
knowledge structuring for comprehensive and transportable machine
understanding that digital information requires. Besides enhancing
information in Topic Maps, this paper proposes a method of
constructing research Topic Maps considering social information.
First, extract conference data from the web. Then extract conference
topics and the relationships between them through the proposed
method. Finally visualize it for users to search and browse. This paper
uses ontology, containing abundant of knowledge hierarchy structure,
to facilitate researchers getting useful search results. However, most
previous ontology construction methods didn-t take “people" into
account. So this paper also analyzes the social information which helps
researchers find the possibilities of cooperation/combination as well as
associations between research topics, and tries to offer better results.
Abstract: This paper presents an analytical framework for an
effective online personal knowledge management (PKM) of
knowledge workers. The development of this framework is prompted
by our qualitative research on the PKM processes and cognitive
enablers of knowledge workers in eight organisations selected from
three main industries in Malaysia. This multiple-case research
identifies the relationships between the effectiveness of four online
PKM processes: get/retrieve, understand/analyse, share, and connect.
It also establishes the importance of cognitive enablers that mediate
this relationship, namely, method, identify, decide and drive.
Qualitative analysis is presented as the findings, supported by the
preceded quantitative analysis on an exploratory questionnaire
survey.
Abstract: Newton-Raphson State Estimation method using bus
admittance matrix remains as an efficient and most popular method to
estimate the state variables. Elements of Jacobian matrix are computed
from standard expressions which lack physical significance. In this
paper, elements of the state estimation Jacobian matrix are obtained
considering the power flow measurements in the network elements.
These elements are processed one-by-one and the Jacobian matrix H is
updated suitably in a simple manner. The constructed Jacobian matrix
H is integrated with Weight Least Square method to estimate the state
variables. The suggested procedure is successfully tested on IEEE
standard systems.
Abstract: Continuous measurements and multivariate methods are applied in researching the effects of energy consumption on indoor air quality (IAQ) in a Finnish one-family house. Measured data used in this study was collected continuously in a house in Kuopio, Eastern Finland, during fourteen months long period. Consumption parameters measured were the consumptions of district heat, electricity and water. Indoor parameters gathered were temperature, relative humidity (RH), the concentrations of carbon dioxide (CO2) and carbon monoxide (CO) and differential air pressure. In this study, self-organizing map (SOM) and Sammon's mapping were applied to resolve the effects of energy consumption on indoor air quality. Namely, the SOM was qualified as a suitable method having a property to summarize the multivariable dependencies into easily observable two-dimensional map. Accompanying that, the Sammon's mapping method was used to cluster pre-processed data to find similarities of the variables, expressing distances and groups in the data. The methods used were able to distinguish 7 different clusters characterizing indoor air quality and energy efficiency in the study house. The results indicate, that the cost implications in euros of heating and electricity energy vary according to the differential pressure, concentration of carbon dioxide, temperature and season.
Abstract: This work presents a study on the abrasive water jet
(AWJ) machining. An explicit finite element analysis (FEA) of
single abrasive particle impact on stainless steel 1.4304 (AISI 304) is
conducted. The abrasive water jet machining is modeled by FEA
software ABAQUS/CAE. Shapes of craters in FEM simulation
results were used and compared with the previous experimental and
FEM works by means of crater sphericity. The influence of impact
angle and particle velocity was observed. Adaptive mesh domain is
used to model the impact zone. Results are in good agreement with
those obtained from the experimental and FEM simulation. The
crater-s depth is also obtained for different impact angle and abrasive
particle velocities.
Abstract: In this paper, novel statistical sampling based equalization techniques and CNN based detection are proposed to increase the spectral efficiency of multiuser communication systems over fading channels. Multiuser communication combined with selective fading can result in interferences which severely deteriorate the quality of service in wireless data transmission (e.g. CDMA in mobile communication). The paper introduces new equalization methods to combat interferences by minimizing the Bit Error Rate (BER) as a function of the equalizer coefficients. This provides higher performance than the traditional Minimum Mean Square Error equalization. Since the calculation of BER as a function of the equalizer coefficients is of exponential complexity, statistical sampling methods are proposed to approximate the gradient which yields fast equalization and superior performance to the traditional algorithms. Efficient estimation of the gradient is achieved by using stratified sampling and the Li-Silvester bounds. A simple mechanism is derived to identify the dominant samples in real-time, for the sake of efficient estimation. The equalizer weights are adapted recursively by minimizing the estimated BER. The near-optimal performance of the new algorithms is also demonstrated by extensive simulations. The paper has also developed a (Cellular Neural Network) CNN based approach to detection. In this case fast quadratic optimization has been carried out by t, whereas the task of equalizer is to ensure the required template structure (sparseness) for the CNN. The performance of the method has also been analyzed by simulations.
Abstract: In this paper, multiobjective design of multi-machine Power System Stabilizers (PSSs) using Particle Swarm Optimization (PSO) is presented. The stabilizers are tuned to simultaneously shift the lightly damped and undamped electro-mechanical modes of all machines to a prescribed zone in the s-plane. A multiobjective problem is formulated to optimize a composite set of objective functions comprising the damping factor, and the damping ratio of the lightly damped electromechanical modes. The PSSs parameters tuning problem is converted to an optimization problem which is solved by PSO with the eigenvalue-based multiobjective function. The proposed PSO based PSSs is tested on a multimachine power system under different operating conditions and disturbances through eigenvalue analysis and some performance indices to illustrate its robust performance.
Abstract: The effect of muscle loss due to transfemoral
amputation, on energy expenditure of hip joint and individual
residual muscles was simulated. During swing phase of gait, with
each muscle as an ideal force generator, the lower extremity was
modeled as a two-degree of freedom linkage, for which hip and knee
were joints. According to results, muscle loss will not lead to higher
energy expenditure of hip joint, as long as other parameters of limb
remain unaffected. This finding maybe due to the role of biarticular
muscles in hip and knee joints motion. Moreover, if hip flexors are
removed from the residual limb, residual flexors, and if hip extensors
are removed, residual extensors will do more work. In line with the
common practice in transfemoral amputation, this result demonstrates
during transfemoral amputation, it is important to maintain the length
of residual limb as much as possible.
Abstract: In this paper presents a technique for developing the
computational efficiency in simulating double output induction
generators (DOIG) with two rotor circuits where stator transients are
to be included. Iterative decomposition is used to separate the flux–
Linkage equations into decoupled fast and slow subsystems, after
which the model order of the fast subsystems is reduced by
neglecting the heavily damped fast transients caused by the second
rotor circuit using integral manifolds theory. The two decoupled
subsystems along with the equation for the very slowly changing slip
constitute a three time-scale model for the machine which resulted in
increasing computational speed. Finally, the proposed method of
reduced order in this paper is compared with the other conventional
methods in linear and nonlinear modes and it is shown that this
method is better than the other methods regarding simulation
accuracy and speed.
Abstract: This paper is concerned with exponential stability and stabilization of switched linear systems with interval time-varying delays. The time delay is any continuous function belonging to a given interval, in which the lower bound of delay is not restricted to zero. By constructing a suitable augmented Lyapunov-Krasovskii functional combined with Leibniz-Newton-s formula, a switching rule for the exponential stability and stabilization of switched linear systems with interval time-varying delays and new delay-dependent sufficient conditions for the exponential stability and stabilization of the systems are first established in terms of LMIs. Numerical examples are included to illustrate the effectiveness of the results.
Abstract: Signal processing applications which are iterative in
nature are best represented by data flow graphs (DFG). In these
applications, the maximum sampling frequency is dependent on the
topology of the DFG, the cyclic dependencies in particular. The
determination of the iteration bound, which is the reciprocal of the
maximum sampling frequency, is critical in the process of hardware
implementation of signal processing applications. In this paper, a
novel technique to compute the iteration bound is proposed. This
technique is different from all previously proposed techniques, in the
sense that it is based on the natural flow of tokens into the DFG
rather than the topology of the graph. The proposed algorithm has
lower run-time complexity than all known algorithms. The
performance of the proposed algorithm is illustrated through
analytical analysis of the time complexity, as well as through
simulation of some benchmark problems.
Abstract: This paper addresses the problem of how one can
improve the performance of a non-optimal filter. First the theoretical question on dynamical representation for a given time correlated
random process is studied. It will be demonstrated that for a wide class of random processes, having a canonical form, there exists
a dynamical system equivalent in the sense that its output has the
same covariance function. It is shown that the dynamical approach is more effective for simulating and estimating a Markov and non-
Markovian random processes, computationally is less demanding,
especially with increasing of the dimension of simulated processes.
Numerical examples and estimation problems in low dimensional
systems are given to illustrate the advantages of the approach. A very useful application of the proposed approach is shown for the
problem of state estimation in very high dimensional systems. Here a modified filter for data assimilation in an oceanic numerical model
is presented which is proved to be very efficient due to introducing
a simple Markovian structure for the output prediction error process
and adaptive tuning some parameters of the Markov equation.
Abstract: Thai and Vietnamese music had been influenced and inspired by the traditional Chinese music. Whereby the differences of the tuning systems as well as the music modes are obviously known . The research examined the character of musical instruments, songs and culture between Thai and Vietnamese. An analyzing of songs and modes and the study of tone vibration as well as timbre had been done accurately. This qualitative research is based on documentary and songs analysis, field study, interviews and focus group discussion of Thai and Vietnamese masters. The research aims are to examine the musical instruments and songs of both Thai and Vietnamese as well as the comparison of the sounding system between Thailand and Vietnam. The finding of the research has revealed that there are similarities in certain kinds of instruments but differences in the sound systems regarding songs and scale of Thailand and Vietnam. Both cultural musical instruments are diverse and synthetic combining native and foreign inspiring. An integral part of Vietnam has been highly impacted by Chinese musical convention. Korea, Mongolia and Japan music have also play an active and effectively influenced as their geographical related. Whereas Thailand has been influenced by Chinese and Indian traditional music. Both Thai and Vietnamese musical instruments can be divided into four groups: plucked strings, bowed strings, winds and percussion. Songs from both countries have their own characteristics. They are playing a role in touching people heart in ceremonies, social functions and an essential element of the native performing arts. The Vietnamese music melodies have been influenced by Chinese music and taken the same character as Chinese songs. Thai song has specific identity and variety showed in its unique melody. Pentatonic scales have effectively been used in composing Thai and Vietnamese songs, but in different implementing concept.
Abstract: This study presents an investigation of
electrochemical variables and an application of the optimal
parameters in operating a continuous upflow electrocoagulation
reactor in removing dye. Direct red 23, which is azo-based, was used
as a representative of direct dyes. First, a batch mode was employed
to optimize the design parameters: electrode type, electrode distance,
current density and electrocoagulation time. The optimal parameters
were found to be iron anode, distance between electrodes of 8 mm
and current density of 30 A·m-2 with contact time of 5 min. The
performance of the continuous upflow reactor with these parameters
was satisfactory, with >95% color removal and energy consumption
in the order of 0.6-0.7 kWh·m-3.