Abstract: Climate change causes severe effects on natural
habitats, especially wetlands. These challenges require the adaptation
of their management to probable effects of climate change. A
compilation of necessary changes in land management was collected
in a Hungarian area being both national park and Natura 2000 SAC
and SCI site in favor of increasing the resilience and reducing
vulnerability. Several factors, such as ecological aspects, nature
conservation and climatic adaptation should be combined with social
and economic factors during the process of developing climate
change adapted management on vulnerable wetlands. Planning
adaptive management should be determined by a priority order of
conservation aims and evaluation of factors at the determined
planning unit. Mowing techniques, frequency and exact date should
be observed as well as grazing species and their breed, due to
different grazing, group forming and trampling habits. Integrating
landscape history and historical land development into the planning
process is essential.
Abstract: This study had two goals. First, it investigated marital
interaction variables as predictors of treatment outcome in panic
disorder with agoraphobia (PDA) in sixty-five couples with one
spouse suffering from PDA. Second, it analyzed the impact of PDA
improvement, following therapy, on marital interaction patterns of
both spouses. The partners were observed during a problem-solving
task, before and after treatment. Negative behaviors at the outset of
therapy, both in the PDA and the NPDA partners, predicted less
improvement at post-test. It also appears that improvement in some
PDA symptoms following therapy is linked to increase in the
dominant behavior of the NPDA spouse and to an improvement in
terms of his intrusiveness.
Abstract: Silver-exchanged zeolites and clays are used in
polymer composites to confer broad-spectrum antimicrobial
properties on a range of functional materials. Tobermorite is a layer
lattice mineral whose potential as a carrier for Ag+ ions in
antibacterial composites has not yet been investigated. Accordingly,
in this study, synthetic tobermorite was ion-exchanged with 10 wt%
silver ions and the resulting material was incorporated into a
composite film with chitosan. Chitosan is a biocompatible,
biodegradable derivative of chitin, a polysaccharide obtained from
the shells of crustaceans. The solvent-cast Ag+-exchanged
tobermorite-chitosan films were found to exhibit antimicrobial action
against Staphylococcus aureus, Escherichia coli and Pseudomonas
aeruginosa.
Abstract: This article deals with the popularity of candidates for the president of the United States of America. The popularity is assessed according to public comments on the Web 2.0. Social networking, blogging and online forums (collectively Web 2.0) are for common Internet users the easiest way to share their personal opinions, thoughts, and ideas with the entire world. However, the web content diversity, variety of technologies and website structure differences, all of these make the Web 2.0 a network of heterogeneous data, where things are difficult to find for common users. The introductory part of the article describes methodology for gathering and processing data from Web 2.0. The next part of the article is focused on the evaluation and content analysis of obtained information, which write about presidential candidates.
Abstract: People have the habitual pitch level which is used when people say something generally. However this pitch should be changed irregularly in the presence of noise. So it is useful to estimate SNR of speech signal by pitch. In this paper, we obtain the energy of input speech signal and then we detect a stationary region on voiced speech. And we get the pitch period by NAMDF for the stationary region that is not varied pitch rapidly. After getting pitch, each frame is divided by pitch period and the likelihood of closed pitch is estimated. In this paper, we proposed new parameter, NLF, to estimate the SNR of received speech signal. The NLF is derived from the correlation of near pitch periods. The NLF is obtained for each stationary region in voiced speech. Finally we confirmed good performance of the estimation of the SNR of received input speech in the presence of noise.
Abstract: In this paper we present a Adaptive Neuro-Fuzzy
System (ANFIS) with inputs the lagged dependent variable for the
prediction of Gross domestic Product growth rate in six countries.
We compare the results with those of Autoregressive (AR) model.
We conclude that the forecasting performance of neuro-fuzzy-system
in the out-of-sample period is much more superior and can be a very
useful alternative tool used by the national statistical services and the
banking and finance industry.
Abstract: Hollywood has produced various blockbusters on the
subject of disasters. Entering the 2000s, disaster films began to be
produced in the East Asian region as well, and as most of them were
successful, disaster films have settled as a popular genre in the region.
East Asian disaster films utilize a plot structure similar to Hollywood
films but, at the same time, represent East Asian people-s unique value
system. East Asian people-s social behavior pattern defined as
collectivism is a characteristic that distinguishes this region from other
cultural regions. In order to examine Confucian culture in disaster
films on the premise of the difference, the author conducts this
research as follows.This study first reviews the concepts disaster and
disaster film, and understands the genre through analyzing the
narrative structure and style. In addition, it discusses collectivism, a
characteristic of the East Asian region distinguished from the West,
and investigates Confucian culture in films and examines differences
among Korean, Chinese and Japanese Confucianism. Films selected
for this study are Tidal Wave (Korea, 2009), After Shock (China,
2006), and The Sinking of Japan (Japan, 2006). Using the characters in
these films, we analyze how Confucian thought is described and
reproduced.
Abstract: For future Broad band ISDN, Asynchronous Transfer
Mode (ATM) is designed not only to support a wide range of traffic
classes with diverse flow characteristics, but also to guarantee the
different quality of service QOS requirements. The QOS may be
measured in terms of cell loss probability and maximum cell delay.
In this paper, ATM networks in which the virtual path (VP)
concept is implemented are considered. By applying the Markov
Deterministic process method, an efficient algorithm to compute the
minimum capacity required to satisfy the QOS requirements when
multiple classes of on-off are multiplexed on to a single VP. Using
the result, we then proposed a simple algorithm to determine different
combinations of VP to achieve the optimum of the total capacity
required for satisfying the individual QOS requirements (loss- delay).
Abstract: In this paper, our concern is the management of mobile transactions in the shared area among many servers, when the mobile user moves from one cell to another in online partiallyreplicated distributed mobile database environment. We defined the concept of transaction and classified the different types of transactions. Based on this analysis, we propose an algorithm that handles the disconnection due to moving among sites.
Abstract: Microaneurysm is a key indicator of diabetic retinopathy that can potentially cause damage to retina. Early detection and automatic quantification are the keys to prevent further damage. In this paper, which focuses on automatic microaneurysm detection in images acquired through non-dilated pupils, we present a series of experiments on feature selection and automatic microaneurysm pixel classification. We found that the best feature set is a combination of 10 features: the pixel-s intensity of shade corrected image, the pixel hue, the standard deviation of shade corrected image, DoG4, the area of the candidate MA, the perimeter of the candidate MA, the eccentricity of the candidate MA, the circularity of the candidate MA, the mean intensity of the candidate MA on shade corrected image and the ratio of the major axis length and minor length of the candidate MA. The overall sensitivity, specificity, precision, and accuracy are 84.82%, 99.99%, 89.01%, and 99.99%, respectively.
Abstract: Considering the numerous applications of the study of
the flow due to leakage in a buried pipe
in unsaturated porous media, finding a proper model to explain the
influence of the effective factors is of great importance.There are
various important factors involved in this type of flow such as: pipe
leakage size and location, burial depth, the degree of the saturation of
the surrounding porous medium, characteristics of the porous
medium, fluid type and pressure of the upstream.In this study, the
flow through unsaturated porous media due to leakage of a buried
pipe for up and down leakage location is studied experimentally and
numerically and their results are compared. Study results show that
Darcy equation together with BCM method (for calculating the
relative permeability) have suitable ability for predicting the flow due
to leakage of buried pipes in unsaturated porous media.
Abstract: Green home rating has emerged as an important
agenda to practice the principles of sustainability. In Malaysia, the
establishment of the 'Green Building Index ' Residential New
Construction- (GBI-RNC) has brought this agenda closer to the
stakeholders of the local green building industry. GBI-RNC focuses
on the evaluation of the environmental impacts posed by houses
rather than assessing the Triple-Bottom-Line (TBL) of Sustainability
which also include socio-economic factors. Therefore, as part of a
wider study, a survey was conducted to gather the backgrounds of
green building stakeholders in Malaysia and their responses to a
number of exploratory questions regarding the setting up of a
framework to rate green homes against the TBL. This paper reports
the findings from Section A and B from this survey and discusses
them accordingly with a conclusion that forms part of the basis for a
new generation green home rating framework specifically for use in
Malaysia.
Abstract: One of the major parts of a jet engine is air intake,
which provides proper and required amount of air for the engine to
operate. There are several aerodynamic parameters which should be
considered in design, such as distortion, pressure recovery, etc. In
this research, the effects of lip ice accretion on pitot intake
performance are investigated. For ice accretion phenomenon, two
supervised multilayer neural networks (ANN) are designed, one for
ice shape prediction and another one for ice roughness estimation
based on experimental data. The Fourier coefficients of transformed
ice shape and parameters include velocity, liquid water content
(LWC), median volumetric diameter (MVD), spray time and
temperature are used in neural network training. Then, the subsonic
intake flow field is simulated numerically using 2D Navier-Stokes
equations and Finite Volume approach with Hybrid mesh includes
structured and unstructured meshes. The results are obtained in
different angles of attack and the variations of intake aerodynamic
parameters due to icing phenomenon are discussed. The results show
noticeable effects of ice accretion phenomenon on intake behavior.
Abstract: Treatment of tar-containing wastewater is necessary
for the successful operation of biomass gasification plants (BGPs). In
the present study, tar-containing wastewater was treated using lime
and alum for the removal of in-organics, followed by adsorption on
powdered activated carbon (PAC) for the removal of organics. Limealum
experiments were performed in a jar apparatus and activated
carbon studies were performed in an orbital shaker. At optimum
concentrations, both lime and alum individually proved to be capable
of removing color, total suspended solids (TSS) and total dissolved
solids (TDS), but in both cases, pH adjustment had to be carried out
after treatment. The combination of lime and alum at the dose ratio
of 0.8:0.8 g/L was found to be optimum for the removal of inorganics.
The removal efficiency achieved at optimum
concentrations were 78.6, 62.0, 62.5 and 52.8% for color, alkalinity,
TSS and TDS, respectively. The major advantages of the lime-alum
combination were observed to be as follows: no requirement of pH
adjustment before and after treatment and good settleability of
sludge. Coagulation-precipitation followed by adsorption on PAC
resulted in 92.3% chemical oxygen demand (COD) removal and
100% phenol removal at equilibrium. Ammonia removal efficiency
was found to be 11.7% during coagulation-flocculation and 36.2%
during adsorption on PAC. Adsorption of organics on PAC in terms
of COD and phenol followed Freundlich isotherm with Kf = 0.55 &
18.47 mg/g and n = 1.01 & 1.45, respectively. This technology may
prove to be one of the fastest and most techno-economically feasible
methods for the treatment of tar-containing wastewater generated
from BGPs.
Abstract: This paper describes the use of artificial neural
networks (ANN) for predicting non-linear layer moduli of flexible
airfield pavements subjected to new generation aircraft (NGA)
loading, based on the deflection profiles obtained from Heavy
Weight Deflectometer (HWD) test data. The HWD test is one of the
most widely used tests for routinely assessing the structural integrity
of airport pavements in a non-destructive manner. The elastic moduli
of the individual pavement layers backcalculated from the HWD
deflection profiles are effective indicators of layer condition and are
used for estimating the pavement remaining life. HWD tests were
periodically conducted at the Federal Aviation Administration-s
(FAA-s) National Airport Pavement Test Facility (NAPTF) to
monitor the effect of Boeing 777 (B777) and Beoing 747 (B747) test
gear trafficking on the structural condition of flexible pavement
sections. In this study, a multi-layer, feed-forward network which
uses an error-backpropagation algorithm was trained to approximate
the HWD backcalculation function. The synthetic database generated
using an advanced non-linear pavement finite-element program was
used to train the ANN to overcome the limitations associated with
conventional pavement moduli backcalculation. The changes in
ANN-based backcalculated pavement moduli with trafficking were
used to compare the relative severity effects of the aircraft landing
gears on the NAPTF test pavements.
Abstract: For a spatiotemporal database management system,
I/O cost of queries and other operations is an important performance
criterion. In order to optimize this cost, an intense research on
designing robust index structures has been done in the past decade.
With these major considerations, there are still other design issues
that deserve addressing due to their direct impact on the I/O cost.
Having said this, an efficient buffer management strategy plays a key
role on reducing redundant disk access. In this paper, we proposed an
efficient buffer strategy for a spatiotemporal database index
structure, specifically indexing objects moving over a network of
roads. The proposed strategy, namely MONPAR, is based on the data
type (i.e. spatiotemporal data) and the structure of the index
structure. For the purpose of an experimental evaluation, we set up a
simulation environment that counts the number of disk accesses
while executing a number of spatiotemporal range-queries over the
index. We reiterated simulations with query sets with different
distributions, such as uniform query distribution and skewed query
distribution. Based on the comparison of our strategy with wellknown
page-replacement techniques, like LRU-based and Prioritybased
buffers, we conclude that MONPAR behaves better than its
competitors for small and medium size buffers under all used query-distributions.
Abstract: A three-dimensional and pulsatile blood flow in the left ventricle of heart model has been studied numerically. The geometry was derived from a simple approximation of the left ventricle model and the numerical simulations were obtained using a formulation of the Navier-Stokes equations. In this study, simulation was used to investigate the pattern of flow velocity in 3D model of heart with consider the left ventricle based on critical parameter of blood under steady condition. Our results demonstrate that flow velocity focused from mitral valve channel and continuous linearly to left ventricle wall but this skewness progresses into outside wall in atrium through aortic valve with random distribution that is irregular due to force subtract from ventricle wall during cardiac cycle. The findings are the prediction of the behavior of the blood flow velocity pattern in steady flow condition which can assist the medical practitioners in their decision on the patients- treatments.
Abstract: This paper presents a SCR-based ESD protection devices for I/O clamp and power rail clamp, respectably. These devices have a low trigger voltage and high holding voltage characteristics than conventional SCR device. These devices are fabricated by using 0.35um BCD (Bipolar-CMOS-DMOS) processes. These devices were validated using a TLP system. From the experimental results, the device for I/O ESD clamp has a trigger voltage of 5.8V. Also, the device for power rail ESD clamp has a holding voltage of 7.7V.
Abstract: This paper presents the IP traffic analysis. The traffic
was collected from the network of Suranaree University of
Technology using the software based on the Simple Network
Management Protocol (SNMP). In particular, we analyze the
distribution of the aggregated traffic during the hours of peak load
and light load. The traffic profiles including the parameters described
the traffic distributions were derived. From the statistical analysis
applying three different methods, including the Kolmogorov Smirnov
test, Anderson Darling test, and Chi-Squared test, we found that the
IP traffic distribution is a non-normal distribution and the
distributions during the peak load and the light load are different. The
experimental study and analysis show high uncertainty of the IP
traffic.
Abstract: This study demonstrates the feasibility of joining the commercial pure copper plates by friction stir welding (FSW). Microstructure, microhardness and tensile properties in terms of the joint efficiency were found 94.03 % compare to as receive base material (BM). The average hardness at the top was higher than bottom. Hardness of weld zone was higher than the base material. Different microstructure zones were revealed by optical microscopy and scanning electron microscopy. The stirred zone (SZ) exhibited primary two phases namely, recrystallized grains and fine precipitates in matrix of copper.