Abstract: Injection molding is a very complicated process to
monitor and control. With its high complexity and many process
parameters, the optimization of these systems is a very challenging
problem. To meet the requirements and costs demanded by the
market, there has been an intense development and research with the
aim to maintain the process under control. This paper outlines the
latest advances in necessary algorithms for plastic injection process
and monitoring, and also a flexible data acquisition system that
allows rapid implementation of complex algorithms to assess their
correct performance and can be integrated in the quality control
process. This is the main topic of this paper. Finally, to demonstrate
the performance achieved by this combination, a real case of use is
presented.
Abstract: Recently, X. Ge and J. Qian investigated some relations between higher mathematics scores and calculus scores (resp. linear algebra scores, probability statistics scores) for Chinese university students. Based on rough-set theory, they established an information system S = (U,CuD,V, f). In this information system, higher mathematics score was taken as a decision attribute and calculus score, linear algebra score, probability statistics score were taken as condition attributes. They investigated importance of each condition attribute with respective to decision attribute and strength of each condition attribute supporting decision attribute. In this paper, we give further investigations for this issue. Based on the above information system S = (U, CU D, V, f), we analyze the decision rules between condition and decision granules. For each x E U, we obtain support (resp. strength, certainty factor, coverage factor) of the decision rule C —>x D, where C —>x D is the decision rule induced by x in S = (U, CU D, V, f). Results of this paper gives new analysis of on higher mathematics scores for Chinese university students, which can further lead Chinese university students to raise higher mathematics scores in Chinese graduate student entrance examination.
Abstract: Due to today-s fierce competition, companies have to
be proactive creators of the future by effectively developing
innovations. Especially radical innovations allow high profit margins
– but they also entail high risks. One possibility to realize radical
innovations and reduce the risk of failure is cross-industry innovation
(CII). CII brings together problems and solution ideas from different
industries. However, there is a lack of systematic ways towards CII.
Bridging this gap, the present paper provides a systematic approach
towards planned CII. Starting with the analysis of potentials, the
definition of promising search strategies is crucial. Subsequently,
identified solution ideas need to be assessed. For the most promising
ones, the adaption process has to be systematically planned –
regarding the risk affinity of a company. The introduced method is
explained on a project from the furniture industry.
Abstract: Champs Bourcin black grape originated from
Aquitaine, France and planted in Sapa, Lao cai provice, exhibited
high total acidity (11.72 g/L). After 9 days of alcoholic fermentation
at 25oC using Saccharomyces cerevisiae UP3OY5 strain, the ethanol
concentration of wine was 11.5% v/v, however the sharp sour taste of
wine has been found. The malolactic fermentation (MLF) was carried
out by Oenococcus oeni ATCCBAA-1163 strain which had been preadapted
to acid (pH 3-4) and ethanol (8-12%v/v) conditions. We
obtained the highest vivability (83.2%) upon malolactic fermentation
after 5 days at 22oC with early stationary phase O. oeni cells preadapted
to pH 3.5 and 8% v/v ethanol in MRS medium. The malic
acid content in wine was decreased from 5.82 g/L to 0.02 g/L after
MLF (21 days at 22oC). The sensory quality of wine was
significantly improved.
Abstract: In networks, mainly small and medium-sized businesses benefit from the knowledge, experiences and solutions offered by experts from industry and science or from the exchange with practitioners. Associations which focus, among other things, on networking, information and knowledge transfer and which are interested in supporting such cooperations are especially well suited to provide such networks and the appropriate web platforms. Using METORA as an example – a project developed and run by the Federal Association for Information Economy, Telecommunications and New Media e.V. (BITKOM) for the Federal Ministry of Economics and Technology (BMWi) – This paper will discuss how associations and other network organizations can achieve this task and what conditions they have to consider.
Abstract: Bovine viral diarrhea virus (BVDV) can cause lifelong
persistent infection. One reason for the phenomena is attributed to
BVDV infection to placenta tissue. However the mechanisms that
BVDV invades into placenta tissue remain unclear. To clarify the
molecular mechanisms, we investigated the possible means that
BVDV entered into bovine trophoblast cells (TPC). Yeast two-hybrid
system was used to identify proteins extracted from TPC, which
interact with BVDV envelope glycoprotein E2. A PGbkt7-E2 yeast
expression vector and TPC cDNA library were constructed. Through
two rounds of screening, three positive clones were identified.
Sequencing analysis indicated that all the three positive clones
encoded the same protein clathrin. Physical interaction between
clathrin and BVDV E2 protein was further confirmed by
coimmunoprecipitation experiments. This result suggested that the
clathrin might play a critical role in the process of BVDV entry into
placenta tissue and might be a novel antiviral target for preventing
BVDV infection.
Abstract: The new framework the Higher Education is
immersed in involves a complete change in the way lecturers must
teach and students must learn. Whereas the lecturer was the main
character in traditional education, the essential goal now is to
increase the students' participation in the process. Thus, one of the
main tasks of lecturers in this new context is to design activities of
different nature in order to encourage such participation. Seminars
are one of the activities included in this environment. They are active
sessions that enable going in depth into specific topics as support of
other activities. They are characterized by some features such as
favoring interaction between students and lecturers or improving
their communication skills. Hence, planning and organizing strategic
seminars is indeed a great challenge for lecturers with the aim of
acquiring knowledge and abilities. This paper proposes a method
using Artificial Intelligence techniques to obtain student profiles
from their marks and preferences. The goal of building such profiles
is twofold. First, it facilitates the task of splitting the students into
different groups, each group with similar preferences and learning
difficulties. Second, it makes it easy to select adequate topics to be a
candidate for the seminars. The results obtained can be either a
guarantee of what the lecturers could observe during the development
of the course or a clue to reconsider new methodological strategies in
certain topics.
Abstract: Road transportation system is the most important
method of transporting the goods. Considering the most suitable
geographical situation of Iran to transport the goods between Europe
and Asia and placement of this country in direction of international
corridors (east- west) , (north-south) and Asian land transport to
infrastructure development “A.L.T.I.D" and Transport corridor
Europe - Caucasus - Asia “T.R.A.C.E.C.A", noticing the security of
road transportation system in this country is so important. In this
paper the main factors of accidents on the roads of Iran are
categorized regarding the rate of accidents occurred. Then apart from
studying the main reasons of accidents of every category, the main
factors of these events are studied and its strategies in Iran are
introduced.
Abstract: Every day human life experiences new equipments
more automatic and with more abilities. So the need for faster
processors doesn-t seem to finish. Despite new architectures and
higher frequencies, a single processor is not adequate for many
applications. Parallel processing and networks are previous solutions
for this problem. The new solution to put a network of resources on a
chip is called NOC (network on a chip). The more usual topology for
NOC is mesh topology. There are several routing algorithms suitable
for this topology such as XY, fully adaptive, etc. In this paper we
have suggested a new algorithm named Intermittent X, Y (IX/Y). We
have developed the new algorithm in simulation environment to
compare delay and power consumption with elders' algorithms.
Abstract: Long term rainfall analysis and prediction is a
challenging task especially in the modern world where the impact of
global warming is creating complications in environmental issues.
These factors which are data intensive require high performance
computational modeling for accurate prediction. This research paper
describes a prototype which is designed and developed on grid
environment using a number of coupled software infrastructural
building blocks. This grid enabled system provides the demanding
computational power, efficiency, resources, user-friendly interface,
secured job submission and high throughput. The results obtained
using sequential execution and grid enabled execution shows that
computational performance has enhanced among 36% to 75%, for
decade of climate parameters. Large variation in performance can be
attributed to varying degree of computational resources available for
job execution.
Grid Computing enables the dynamic runtime selection, sharing
and aggregation of distributed and autonomous resources which plays
an important role not only in business, but also in scientific
implications and social surroundings. This research paper attempts to
explore the grid enabled computing capabilities on weather indices
from HOAPS data for climate impact modeling and change
detection.
Abstract: this paper presents a novel neural network controller
with composite adaptation low to improve the trajectory tracking
problems of biped robots comparing with classical controller. The
biped model has 5_link and 6 degrees of freedom and actuated by
Plated Pneumatic Artificial Muscle, which have a very high power to
weight ratio and it has large stoke compared to similar actuators. The
proposed controller employ a stable neural network in to approximate
unknown nonlinear functions in the robot dynamics, thereby
overcoming some limitation of conventional controllers such as PD
or adaptive controllers and guarantee good performance. This NN
controller significantly improve the accuracy requirements by
retraining the basic PD/PID loop, but adding an inner adaptive loop
that allows the controller to learn unknown parameters such as
friction coefficient, therefore improving tracking accuracy.
Simulation results plus graphical simulation in virtual reality show
that NN controller tracking performance is considerably better than
PD controller tracking performance.
Abstract: Enzymatic saccharification of biomass for reducing
sugar production is one of the crucial processes in biofuel production
through biochemical conversion. In this study, enzymatic
saccharification of dilute potassium hydroxide (KOH) pre-treated
Tetraselmis suecica biomass was carried out by using cellulase
enzyme obtained from Trichoderma longibrachiatum. Initially, the
pre-treatment conditions were optimised by changing alkali reagent
concentration, retention time for reaction, and temperature. The T.
suecica biomass after pre-treatment was also characterized using
Fourier Transform Infrared Spectra and Scanning Electron
Microscope. These analyses revealed that the functional group such
as acetyl and hydroxyl groups, structure and surface of T. suecica
biomass were changed through pre-treatment, which is favourable for
enzymatic saccharification process. Comparison of enzymatic
saccharification of untreated and pre-treated microalgal biomass
indicated that higher level of reducing sugar can be obtained from
pre-treated T. suecica. Enzymatic saccharification of pre-treated T.
suecica biomass was optimised by changing temperature, pH, and
enzyme concentration to solid ratio ([E]/[S]). Highest conversion of
carbohydrate into reducing sugar of 95% amounted to reducing sugar
yield of 20 (wt%) from pre-treated T. suecica was obtained from
saccharification, at temperature: 40°C, pH: 4.5 and [E]/[S] of 0.1
after 72 h of incubation. Hydrolysate obtained from enzymatic
saccharification of pretreated T. suecica biomass was further
fermented into biobutanol using Clostridium saccharoperbutyliticum
as biocatalyst. The results from this study demonstrate a positive
prospect of application of dilute alkaline pre-treatment to enhance
enzymatic saccharification and biobutanol production from
microalgal biomass.
Abstract: The Mobile Ad-hoc Network (MANET) is a collection of self-configuring and rapidly deployed mobile nodes (routers) without any central infrastructure. Routing is one of the potential issues. Many routing protocols are reported but it is difficult to decide which one is best in all scenarios. In this paper on demand routing protocols DSR and DYMO based on IEEE 802.11 DCF MAC protocol are examined and characteristic summary of these routing protocols is presented. Their performance is analyzed and compared on performance measuring metrics throughput, dropped packets due to non availability of routes, duplicate RREQ generated for route discovery and normalized routing load by varying CBR data traffic load using QualNet 5.0.2 network simulator.
Abstract: This paper studies the mean square exponential synchronization problem of a class of stochastic neutral type chaotic neural networks with mixed delay. On the Basis of Lyapunov stability theory, some sufficient conditions ensuring the mean square exponential synchronization of two identical chaotic neural networks are obtained by using stochastic analysis and inequality technique. These conditions are expressed in the form of linear matrix inequalities (LMIs), whose feasibility can be easily checked by using Matlab LMI Toolbox. The feedback controller used in this paper is more general than those used in previous literatures. One simulation example is presented to demonstrate the effectiveness of the derived results.
Abstract: The trends of design and development of information systems have undergone a variety of ongoing phases and stages. These variations have been evolved due to brisk changes in user requirements and business needs. To meet these requirements and needs, a flexible and agile business solution was required to come up with the latest business trends and styles. Another obstacle in agility of information systems was typically different treatment of same diseases of two patients: business processes and information services. After the emergence of information technology, the business processes and information systems have become counterparts. But these two business halves have been treated under totally different standards. There is need to streamline the boundaries of these both pillars that are equally sharing information system's burdens and liabilities. In last decade, the object orientation has evolved into one of the major solutions for modern business needs and now, SOA is the solution to shift business on ranks of electronic platform. BPM is another modern business solution that assists to regularize optimization of business processes. This paper discusses how object orientation can be conformed to incorporate or embed SOA in BPM for improved information systems.
Abstract: With the advent of inexpensive 32 bit floating point digital signal processor-s availability in market, many computationally intensive algorithms such as Kalman filter becomes feasible to implement in real time. Dynamic simulation of a self excited DC motor using second order state variable model and implementation of Kalman Filter in a floating point DSP TMS320C6713 is presented in this paper with an objective to introduce and implement such an algorithm, for beginners. A fractional hp DC motor is simulated in both Matlab® and DSP and the results are included. A step by step approach for simulation of DC motor in Matlab® and “C" routines in CC Studio® is also given. CC studio® project file details and environmental setting requirements are addressed. This tutorial can be used with 6713 DSK, which is based on floating point DSP and CC Studio either in hardware mode or in simulation mode.
Abstract: Every organization is continually subject to new damages and threats which can be resulted from their operations or their goal accomplishment. Methods of providing the security of space and applied tools have been widely changed with increasing application and development of information technology (IT). From this viewpoint, information security management systems were evolved to construct and prevent reiterating the experienced methods. In general, the correct response in information security management systems requires correct decision making, which in turn requires the comprehensive effort of managers and everyone involved in each plan or decision making. Obviously, all aspects of work or decision are not defined in all decision making conditions; therefore, the possible or certain risks should be considered when making decisions. This is the subject of risk management and it can influence the decisions. Investigation of different approaches in the field of risk management demonstrates their progress from quantitative to qualitative methods with a process approach.
Abstract: Let k, t, d be arbitrary integers with k ≥ 2, t ≥ 0 and
d = k2 - k. In the first section we give some preliminaries from
Pell equations x2 - dy2 = 1 and x2 - dy2 = N, where N be any
fixed positive integer. In the second section, we consider the integer
solutions of Pell equations x2 - dy2 = 1 and x2 - dy2 = 2t. We
give a method for the solutions of these equations. Further we derive
recurrence relations on the solutions of these equations
Abstract: This purpose of this paper is to develop and validate a
model to accurately predict the cell temperature of a PV module that
adapts to various mounting configurations, mounting locations, and
climates while only requiring readily available data from the module
manufacturer. Results from this model are also compared to results
from published cell temperature models. The models were used to
predict real-time performance from a PV water pumping systems in
the desert of Medenine, south of Tunisia using 60-min intervals of
measured performance data during one complete year. Statistical
analysis of the predicted results and measured data highlight possible
sources of errors and the limitations and/or adequacy of existing
models, to describe the temperature and efficiency of PV-cells and
consequently, the accuracy of performance of PV water pumping
systems prediction models.
Abstract: This Classifying Bird Sounds (chip notes) project-s
purpose is to reduce the unwanted noise from recorded bird sound
chip notes, design a scheme to detect differences and similarities
between recorded chip notes, and classify bird sound chip notes. The
technologies of determining the similarities of sound waves have
been used in communication, sound engineering and wireless sound
applications for many years. Our research is focused on the similarity
of chip notes, which are the sounds from different birds. The program
we use is generated by Microsoft Cµ.