Abstract: Medical Surgical Nursing is one of the major subjects
in nursing. This study examined the validity and reliability of the
achievement examination utilizing the Classical Test Theory and
Item Response Theory. The study answered the following objectives
specifically : ( a) To establish the validity and reliability of the
achievement examination utilizing Classical Test Theory and Item
Response Theory ; ( b ) To determine the dimensionality measure of
items and ( c ) to compare the item difficulty and item discrimination
of the Medical Surgical Nursing Achievement examination using
Classical Test Theory ( CTT ) and Item Response Theory ( IRT ).
The developed instrument was administered to fourth year nursing
students (N= 136) of a private university in Manila. The findings
yielded the following results: The achievement examination is
reliable both using CTT and IRT. The findings indicate person and
item statistics from two frameworks are quite alike. The achievement
examination formed a unidimensional construct.
Abstract: Natural frequencies and dynamic response of a spur
gear sector are investigated using a two dimensional finite element
model that offers significant advantages for dynamic gear analyses.
The gear teeth are analyzed for different operating speeds. A primary
feature of this modeling is determination of mesh forces using a
detailed contact analysis for each time step as the gears roll through
the mesh. ANSYS software has been used on the proposed model to
find the natural frequencies by Block Lanczos technique and
displacements and dynamic stresses by transient mode super position
method. The effect of rotational speed of the gear on the dynamic
response of gear tooth has been studied and design limits have been
discussed.
Abstract: The new idea of analyze of power system failure with
use of artificial neural network is proposed. An analysis of the
possibility of simulating phenomena accompanying system faults and
restitution is described. It was indicated that the universal model for
the simulation of phenomena in whole analyzed range does not exist.
The main classic method of search of optimal structure and
parameter identification are described shortly. The example with
results of calculation is shown.
Abstract: The objective of this research is to study the technical
and economic performance of wind/diesel/battery (W/D/B) system
supplying a remote small gathering of six families using HOMER
software package. The electrical energy is to cater for the basic needs
for which the daily load pattern is estimated. Net Present Cost (NPC)
and Cost of Energy (COE) are used as economic criteria, while the measure of performance is % of power shortage. Technical and
economic parameters are defined to estimate the feasibility of the
system under study. Optimum system configurations are estimated for two sites. Using HOMER software, the simulation results showed that W/D/B systems are economical for the assumed community sites
as the price of generated electricity is about 0.308 $/kWh, without
taking external benefits into considerations. W/D/B systems are more
economical than W/B or diesel alone systems, as the COE is 0.86 $/kWh for W/B and 0.357 $/kWh for diesel alone.
Abstract: An Automated Rapid Maxillary Expander (ARME) is
a specially designed microcontroller-based orthodontic appliance to
overcome the shortcomings imposed by the traditional maxillary
expansion appliances. This new device is operates by automatically
widening the maxilla (upper jaw) by expanding the midpalatal suture
[1]. The ARME appliance that has been developed is a combination
of modified butterfly expander appliance, micro gear, micro motor,
and microcontroller to automatically produce light and continuous
pressure to expand the maxilla. For this study, the functionality of the
system is verified through laboratory tests by measure the forced
applied to the teeth each time the maxilla expands. The laboratory
test results show that the developed appliance meets the desired
performance specifications consistently.
Abstract: The deviation between the target state variable and the
practical state variable should be used to form the state tending factor
of complex systems, which can reflect the process for the complex
system to tend rationalization. Relating to the system of basic
equations of complete factor synergetics consisting of twenty
nonlinear stochastic differential equations, the two new models are
considered to set, which should be called respectively the
rationalizing tendency model and the non- rationalizing tendency
model. Therefore we can extend the theory of programming with the
objective function & constraint condition suitable only for the realm
of man-s activities into the new analysis with the tendency function &
constraint condition suitable for all the field of complex system.
Abstract: Semantic Web Technologies enable machines to
interpret data published in a machine-interpretable form on the web.
At the present time, only human beings are able to understand the
product information published online. The emerging semantic Web
technologies have the potential to deeply influence the further
development of the Internet Economy. In this paper we propose a
scenario based research approach to predict the effects of these new
technologies on electronic markets and business models of traders
and intermediaries and customers. Over 300 million searches are
conducted everyday on the Internet by people trying to find what
they need. A majority of these searches are in the domain of
consumer ecommerce, where a web user is looking for something to
buy. This represents a huge cost in terms of people hours and an
enormous drain of resources. Agent enabled semantic search will
have a dramatic impact on the precision of these searches. It will
reduce and possibly eliminate information asymmetry where a better
informed buyer gets the best value. By impacting this key
determinant of market prices semantic web will foster the evolution
of different business and economic models. We submit that there is a
need for developing these futuristic models based on our current
understanding of e-commerce models and nascent semantic web
technologies. We believe these business models will encourage
mainstream web developers and businesses to join the “semantic web
revolution."
Abstract: In this paper, we explore the applicability of the Sinc-
Collocation method to a three-dimensional (3D) oceanography model.
The model describes a wind-driven current with depth-dependent
eddy viscosity in the complex-velocity system. In general, the
Sinc-based methods excel over other traditional numerical methods
due to their exponentially decaying errors, rapid convergence and
handling problems in the presence of singularities in end-points.
Together with these advantages, the Sinc-Collocation approach that
we utilize exploits first derivative interpolation, whose integration
is much less sensitive to numerical errors. We bring up several
model problems to prove the accuracy, stability, and computational
efficiency of the method. The approximate solutions determined by
the Sinc-Collocation technique are compared to exact solutions and
those obtained by the Sinc-Galerkin approach in earlier studies. Our
findings indicate that the Sinc-Collocation method outperforms other
Sinc-based methods in past studies.
Abstract: The empirical studies on High Performance Work Systems (HPWSs) and their impacts on firm performance have remarkably little in the developing countries. This paper reviews literatures on the HPWSs practices in different work settings, Western and Asian countries. A review on the empirical research leads to a conclusion that, country differences influence the Human Resource Management (HRM) practices. It is anticipated that there are similarities and differences in the extent of implementation of HPWSs practices by the Malaysian manufacturing firms due to the organizational contextual factors and, the HPWSs have a significant impact on firms- better performance amongst MNCs and local firms.
Abstract: In this paper, subtractive clustering based fuzzy inference system approach is used for early detection of faults in the function oriented software systems. This approach has been tested with real time defect datasets of NASA software projects named as PC1 and CM1. Both the code based model and joined model (combination of the requirement and code based metrics) of the datasets are used for training and testing of the proposed approach. The performance of the models is recorded in terms of Accuracy, MAE and RMSE values. The performance of the proposed approach is better in case of Joined Model. As evidenced from the results obtained it can be concluded that Clustering and fuzzy logic together provide a simple yet powerful means to model the earlier detection of faults in the function oriented software systems.
Abstract: In this paper a new approach is proposed for the
adaptation of the simulated annealing search in the field of the
Multi-Objective Optimization (MOO). This new approach is called
Multi-Case Multi-Objective Simulated Annealing (MC-MOSA). It
uses some basics of a well-known recent Multi-Objective Simulated
Annealing proposed by Ulungu et al., which is referred in the
literature as U-MOSA. However, some drawbacks of this algorithm
have been found, and are substituted by other ones, especially in
the acceptance decision criterion. The MC-MOSA has shown better
performance than the U-MOSA in the numerical experiments. This
performance is further improved by some other subvariants of the
MC-MOSA, such as Fast-annealing MC-MOSA, Re-annealing MCMOSA
and the Two-Stage annealing MC-MOSA.
Abstract: A model is presented to find the optimal design of the
mixed renewable warranty policy for non-repairable Weibull life
products. The optimal design considers the conflict of interests
between the customer and the manufacturer: the customer interests
are longer full rebate coverage period and longer total warranty
coverage period, the manufacturer interests are lower warranty cost
and lower risk. The design factors are full rebate and total warranty
coverage periods. Results showed that mixed policy is better than full
rebate policy in terms of risk and total warranty coverage period in all
of the three bathtub regions. In addition, results showed that linear
policy is better than mixed policy in infant mortality and constant
failure regions while the mixed policy is better than linear policy in
ageing region of the model. Furthermore, the results showed that
using burn-in period for infant mortality products reduces warranty
cost and risk.
Abstract: The increasing usage of antibiotics in the animal
farming industry is an emerging worldwide problem contributing to
the development of antibiotic resistance. The purpose of this work was
to investigate the prevalence and antibiotic resistance profile of
bacterial isolates collected from aquatic environments and meats in a
peri-urban community in Daejeon, Korea. In an antibacterial
susceptibility test, the bacterial isolates showed a high incidence of
resistance (~ 26.04 %) to cefazolin, tetracycline, gentamycin,
norfloxacin, erythromycin and vancomycin. The results from a test for
multiple antibiotic resistance indicated that the isolates were
displaying an approximately 5-fold increase in the incidence of
multiple antibiotic resistance to combinations of two different
antibiotics compared to combinations of three or more antibiotics.
Most of the isolates showed multi-antibiotic resistance, and the
resistance patterns were similar among the sampling groups.
Sequencing data analysis of 16S rRNA showed that most of the
resistant isolates appeared to be dominated by the classes
Betaproteobacteria and Gammaproteobacteria in the phylum
Proteobacteria.
Abstract: In order to improve the effect of isolation structure, the
principles and behaviours of the base-isolation system are studied, and
the types and characteristics of the base-isolation are also discussed.
Compared to the traditional aseismatic structures, the base isolation
structures decrease the seismic response obviously: the total structural
aseismatic value decreases to 1/4-1/32 and the seismic shear stress in
the upper structure decreases to 1/14-1/23. In the huge seism, the
structure can have an obvious aseismatic effect.
Abstract: Socioeconomic stability and development of a
country, can be describe by housing affordability. It is aimed to
ensure the housing provided as one of the key factors that is
affordable by every income earner group whether low-income,
middle income and high income group. This research carried out is to
find out affordability of home ownership level for first medium cost
landed-house by the middle-income group in Selangor, Malaysia. It is
also hope that it could be seen as able to contribute to the knowledge
and understanding on housing affordability level for the middleincome
group and variables that influenced the medium income
group-s ability to own first medium-cost houses.
Abstract: In this research the separation efficiency of deoiling hydrocyclone is evaluated using three-dimensional simulation of multiphase flow based on Eulerian-Eulerian finite volume method. The mixture approach of Reynolds Stress Model is also employed to capture the features of turbulent multiphase swirling flow. The obtained separation efficiency of Colman's design is compared with available experimental data and showed that the separation curve of deoiling hydrocyclones can be predicted using numerical simulation.
Abstract: The paper is dealing by testing of ceramic cutting
tools with an interrupted machining. Tests will be provided on fixture
– interrupted cut simulator. This simulator has 4 mouldings on
circumference and cutting edge is put a shocks during 1 revolution.
Criteria of tool wear are destruction of cutting tool or 6000 shocks.
Like testing cutting tool material will be products of Sandvik
Coromant 6190, 620, 650 and 670. Machined materials was be steels
15 128 (13MoCrV6). Cutting speed (408 m.min-1 and 580 m.min-1)
and cutting feed (0,15 mm; 0,2 mm; 0,25 mm and 0,3 mm) were
variable parameters and cutting depth was constant parameter.
Abstract: The network traffic data provided for the design of
intrusion detection always are large with ineffective information and
enclose limited and ambiguous information about users- activities.
We study the problems and propose a two phases approach in our
intrusion detection design. In the first phase, we develop a
correlation-based feature selection algorithm to remove the worthless
information from the original high dimensional database. Next, we
design an intrusion detection method to solve the problems of
uncertainty caused by limited and ambiguous information. In the
experiments, we choose six UCI databases and DARPA KDD99
intrusion detection data set as our evaluation tools. Empirical studies
indicate that our feature selection algorithm is capable of reducing the
size of data set. Our intrusion detection method achieves a better
performance than those of participating intrusion detectors.
Abstract: The zero truncated model is usually used in modeling
count data without zero. It is the opposite of zero inflated model.
Zero truncated Poisson and zero truncated negative binomial models
are discussed and used by some researchers in analyzing the
abundance of rare species and hospital stay. Zero truncated models
are used as the base in developing hurdle models. In this study, we
developed a new model, the zero truncated strict arcsine model,
which can be used as an alternative model in modeling count data
without zero and with extra variation. Two simulated and one real
life data sets are used and fitted into this developed model. The
results show that the model provides a good fit to the data. Maximum
likelihood estimation method is used in estimating the parameters.
Abstract: Nowadays, there is little information, concerning the
heat shield systems, and this information is not completely reliable to
use in so many cases. for example, the precise calculation cannot be
done for various materials. In addition, the real scale test has two
disadvantages: high cost and low flexibility, and for each case we
must perform a new test. Hence, using numerical modeling program
that calculates the surface recession rate and interior temperature
distribution is necessary. Also, numerical solution of governing
equation for non-charring material ablation is presented in order to
anticipate the recession rate and the heat response of non-charring
heat shields. the governing equation is nonlinear and the Newton-
Rafson method along with TDMA algorithm is used to solve this
nonlinear equation system. Using Newton- Rafson method for
solving the governing equation is one of the advantages of the
solving method because this method is simple and it can be easily
generalized to more difficult problems. The obtained results
compared with reliable sources in order to examine the accuracy of
compiling code.