Abstract: This paper presents a experiment to estimate the
influences of cutting conditions in microstructure changes of
machining austenitic 304 stainless steel, especially for wear insert. The
wear insert were prefabricated with a width of 0.5 mm. And the forces,
temperature distribution, RS, and microstructure changes were
measured by force dynamometer, infrared thermal camera, X-ray
diffraction, XRD, SEM, respectively. The results told that the different
combinations of machining condition have a significant influence on
machined surface microstructure changes. In addition to that, the
ANOVA and AOMwere used to tell the different influences of cutting
speed, feed rate, and wear insert.
Abstract: Heat-inducible gene expression vectors are useful for hyperthermia-induced cancer gene therapy, because the combination
of hyperthermia and gene therapy can considerably improve the therapeutic effects. In the present study, we developed an enhanced
heat-inducible transgene expression system in which a heat-shock
protein (HSP) promoter and tetracycline-responsive transactivator
were combined. When the transactivator plasmid containing the
tetracycline-responsive transactivator gene was co-transfected with
the reporter gene expression plasmid, a high level of heat-induced gene expression was observed compared with that using the HSP
promoter without the transactivator. In vitro evaluation of the
therapeutic effect using HeLa cells showed that heat-induced therapeutic gene expression caused cell death in a high percentage of
these cells, indicating that this strategy is promising for cancer gene therapy.
Abstract: In this paper, we present local image descriptor using
VQ-SIFT for more effective and efficient image retrieval. Instead of
SIFT's weighted orientation histograms, we apply vector quantization
(VQ) histogram as an alternate representation for SIFT features.
Experimental results show that SIFT features using VQ-based local
descriptors can achieve better image retrieval accuracy than the
conventional algorithm while the computational cost is significantly
reduced.
Abstract: In this paper, the modified optimal sliding mode control with a proposed method to design a sliding surface is presented. Because of the inability of the previous approach of the sliding mode method to design a bounded and suitable input, the new variation is proposed in the sliding manifold to obviate problems in a structural system. Although the sliding mode control is a powerful method to reject disturbances and noises, the chattering problem is not good for actuators. To decrease the chattering phenomena, the optimal control is added to the sliding mode control. Not only the proposed method can decline the intense variations in the inputs of the system but also it can produce the efficient responses respect to the sliding mode control and optimal control that are shown by performing some numerical simulations.
Abstract: This study was carried out in Ankara, the capital city of Turkey, in order to determine how people living in the slums of Ankara benefit from educational equality. Within the scope of the research, interviews were made with 64 families whose children have been getting education from the primary schools of these parts and the data of the study was collected by the researcher. The results of the research demonstrate that the children getting education in the slums of Ankara can not experience educational equality and justice. The results of this study show that the opportunities of the schools in the slums of Ankara are very limited, so the individuals in these districts can not equally benefit from the education. The families are aware of the problem they are faced with. KeywordsDiscrimination, inequality, primary education, slums of Turkey.
Abstract: High quality requirements analysis is one of the most
crucial activities to ensure the success of a software project, so that
requirements verification for software system becomes more and more
important in Requirements Engineering (RE) and it is one of the most
helpful strategies for improving the quality of software system.
Related works show that requirement elicitation and analysis can be
facilitated by ontological approaches and semantic web technologies.
In this paper, we proposed a hybrid method which aims to verify
requirements with structural and formal semantics to detect
interactions. The proposed method is twofold: one is for modeling
requirements with the semantic web language OWL, to construct a
semantic context; the other is a set of interaction detection rules which
are derived from scenario-based analysis and represented with
semantic web rule language (SWRL). SWRL based rules are working
with rule engines like Jess to reason in semantic context for
requirements thus to detect interactions. The benefits of the proposed
method lie in three aspects: the method (i) provides systematic steps
for modeling requirements with an ontological approach, (ii) offers
synergy of requirements elicitation and domain engineering for
knowledge sharing, and (3)the proposed rules can systematically assist
in requirements interaction detection.
Abstract: This paper present an effective method to accurately reconstruct and measure the 3D curve edges of small industrial parts based on stereo vision. To effectively fit the curve of the measured parts using a series of line segments in the images, a strategy from coarse to fine is employed based on multi-scale curve fitting. After reconstructing the 3D curve of a hole through a curved surface, its axis is adjusted so that it is parallel to the Z axis with least squares error and the dimensions of the hole can be calculated on the XY plane easily. Experimental results show that the presented method can accurately measure the dimensions of round holes through a curved surface.
Abstract: The object of this research is the design and
evaluation of an immersive Virtual Learning Environment (VLE) for
deaf children. Recently we have developed a prototype immersive
VR game to teach sign language mathematics to deaf students age K-
4 [1] [2]. In this paper we describe a significant extension of the
prototype application. The extension includes: (1) user-centered
design and implementation of two additional interactive
environments (a clock store and a bakery), and (2) user-centered
evaluation including development of user tasks, expert panel-based
evaluation, and formative evaluation. This paper is one of the few to
focus on the importance of user-centered, iterative design in VR
application development, and to describe a structured evaluation
method.
Abstract: There have been different approaches to compute the
analytic instantaneous frequency with a variety of background reasoning
and applicability in practice, as well as restrictions. This paper presents an adaptive Fourier decomposition and (α-counting) based
instantaneous frequency computation approach. The adaptive Fourier
decomposition is a recently proposed new signal decomposition
approach. The instantaneous frequency can be computed through the so called mono-components decomposed by it. Due to the fast energy
convergency, the highest frequency of the signal will be discarded by the adaptive Fourier decomposition, which represents the noise of
the signal in most of the situation. A new instantaneous frequency
definition for a large class of so-called simple waves is also proposed
in this paper. Simple wave contains a wide range of signals for which
the concept instantaneous frequency has a perfect physical sense.
The α-counting instantaneous frequency can be used to compute the highest frequency for a signal. Combination of these two approaches one can obtain the IFs of the whole signal. An experiment is demonstrated the computation procedure with promising results.
Abstract: Several studies have shown the association between
ambient particulate matter (PM) and adverse health effects and
climate change, thus highlighting the need to limit the anthropogenic
sources of PM. PM Exposure is commonly monitored as mass
concentration of PM10 (particle aerodynamic diameter < 10μm) or
PM2.5 (particle aerodynamic diameter < 2.5μm), although increasing
toxicity with decreasing aerodynamic diameter has been reported due
to increased surface area and enhanced chemical reactivity with other
species. Additionally, the light scattering properties of PM increases
with decreasing size. Hence, it is important to study the chemical
characterization of finer fraction of the particulate matter and to
identify their sources so that they can be controlled appropriately to a
large extent at the sources before reaching to the receptors.
Abstract: Recently, neural networks have shown good
results for detection of a certain pattern in a given image. In
our previous papers [1-5], a fast algorithm for pattern
detection using neural networks was presented. Such
algorithm was designed based on cross correlation in the
frequency domain between the input image and the weights
of neural networks. Image conversion into symmetric shape
was established so that fast neural networks can give the
same results as conventional neural networks. Another
configuration of symmetry was suggested in [3,4] to improve
the speed up ratio. In this paper, our previous algorithm for
fast neural networks is developed. The frequency domain
cross correlation is modified in order to compensate for the
symmetric condition which is required by the input image.
Two new ideas are introduced to modify the cross correlation
algorithm. Both methods accelerate the speed of the fast
neural networks as there is no need for converting the input
image into symmetric one as previous. Theoretical and
practical results show that both approaches provide faster
speed up ratio than the previous algorithm.
Abstract: The group mutual exclusion (GME) problem is a
variant of the mutual exclusion problem. In the present paper a
token-based group mutual exclusion algorithm, capable of handling
transient faults, is proposed. The algorithm uses the concept of
dynamic request sets. A time out mechanism is used to detect the
token loss; also, a distributed scheme is used to regenerate the token.
The worst case message complexity of the algorithm is n+1. The
maximum concurrency and forum switch complexity of the
algorithm are n and min (n, m) respectively, where n is the number of
processes and m is the number of groups. The algorithm also satisfies
another desirable property called smooth admission. The scheme can
also be adapted to handle the extended group mutual exclusion
problem.
Abstract: This paper describes how the correct endian mode of
the TMS320C6713 DSK board can be identified. It also explains how
the TMS320C6713 DSK board can be used in the little endian and in
the big endian modes for assembly language programming in
particular and for signal processing in general. Similarly, it discusses
how crucially important it is for a user of the TMS320C6713 DSK
board to identify the mode of operation and then use it correctly
during the development stages of the assembly language
programming; otherwise, it will cause unnecessary confusion and
erroneous results as far as storing data into the memory and loading
data from the memory is concerned. Furthermore, it highlights and
strongly recommends to the users of the TMS320C6713 DSK board
to be aware of the availability and importance of various display
options in the Code Composer Studio (CCS) for correctly
interpreting and displaying the desired data in the memory. The
information presented in this paper will be of great importance and
interest to those practitioners and developers who wants to use the
TMS320C6713 DSK board for assembly language programming as
well as input-output signal processing manipulations. Finally,
examples that clearly illustrate the concept are presented.
Abstract: Chronic diseases prevailed along with economic
growth as well as life style changed in recent years in Taiwan.
According to the governmental statistics, hypertension related disease
is the tenth of death causes with 1,816 died directly from hypertension
in 2010. There were more death causes amongst the top ten had been
proofed that having strong association with the hypertension, such as
heart diseases, cardiovascular diseases, and diabetes. Hypertension or
High blood pressure is one of the major indicators for chronic diseases,
and was generally perceived as the major causes of mortality. The
literature generally suggested that regular physical exercise was
helpful to prevent the occurrence or to ease the progress of a
hypertension. This paper reported the process and outcomes in
detailed of an improvement project of physical exercise intervention
specific for hypertension patients. Physical information were
measured before and after the project to obtain information such as
weight, waistline, cholesterol (HD & LD), blood examination, as well
as self-perceived health status. The intervention project involved a
six-week exercise program, of which contained three times a week, 30
minutes of tutored physical exercise intervention. The project had
achieved several gains in changing the subjects- behavior in terms of
many important biophysical indexes. Around 20% of the participants
had significantly improved their cholesterols, BMI, and changed
unhealthy behaviors. Results from the project were encouraging, and
would be good reference for other samples.
Abstract: Sedimentation is a hydraulic phenomenon that is
emerging as a serious challenge in river engineering. When the flow
reaches a certain state that gather potential energy, it shifts the
sediment load along channel bed. The transport of such materials can
be in the form of suspended and bed loads. The movement of these
along the river course and channels and the ways in which this could
influence the water intakes is considered as the major challenges for
sustainable O&M of hydraulic structures. This could be very serious
in arid and semi-arid regions like Iran, where inappropriate watershed
management could lead to shifting a great deal of sediments into the
reservoirs and irrigation systems. This paper aims to investigate
sedimentation in the Western Canal of Dez Diversion Weir in Iran,
identifying factors which influence the process and provide ways in
which to mitigate its detrimental effects by using the SHARC
Software.
For the purpose of this paper, data from the Dezful water authority
and Dezful Hydrometric Station pertinent to a river course of about 6
Km were used.
Results estimated sand and silt bed loads concentrations to be 193
ppm and 827ppm respectively. Given the available data on average
annual bed loads and average suspended sediment loads of 165ppm
and 837ppm, there was a significant statistical difference (16%)
between the sand grains, whereas no significant difference (1.2%)
was find in the silt grain sizes. One explanation for such finding
being that along the 6 Km river course there was considerable
meandering effects which explains recent shift in the hydraulic
behavior along the stream course under investigation. The sand
concentration in downstream relative to present state of the canal
showed a steep descending curve. Sediment trapping on the other
hand indicated a steep ascending curve. These occurred because the
diversion weir was not considered in the simulation model.
Abstract: Buildings and associated construction methods have a significant impact on the environment. As construction activity increases in Kuwait, there is a need to create design and construction strategies which will minimize the environmental impact of new buildings. Green construction is a design philosophy intended to improve the sustainability of construction by the minimization of resource depletion and CO2 emissions throughout the life cycle of buildings. This paper presents and discusses the results of a survey that was conducted in Kuwait, with the objective of investigating the awareness of developers and other stakeholders regarding their understanding and use of green construction strategies. The results of the survey demonstrate that whilst there seems to be a reasonable level of awareness amongst the stakeholders, this awareness is not currently well reflected in the design and construction practices actually being applied. It is therefore concluded is there is a pressing need for intervention from Government in order that the use of sustainable green design and construction strategies becomes the norm in Kuwait.
Abstract: The electromagnetic imaging of inhomogeneous
dielectric cylinders buried in a slab medium by transverse electric
(TE) wave illumination is investigated. Dielectric cylinders of
unknown permittivities are buried in second space and scattered a
group of unrelated waves incident from first space where the scattered
field is recorded. By proper arrangement of the various unrelated
incident fields, the difficulties of ill-posedness and nonlinearity are
circumvented, and the permittivity distribution can be reconstructed
through simple matrix operations. The algorithm is based on the
moment method and the unrelated illumination method. Numerical
results are given to demonstrate the capability of the inverse
algorithm. Good reconstruction is obtained even in the presence of
additive Gaussian random noise in measured data. In addition, the
effect of noise on the reconstruction result is also investigated.
Abstract: In this paper, we proposed an efficient data
compression strategy exploiting the multi-resolution characteristic of
the wavelet transform. We have developed a sensor node called
“Smart Sensor Node; SSN". The main goals of the SSN design are
lightweight, minimal power consumption, modular design and robust
circuitry. The SSN is made up of four basic components which are a
sensing unit, a processing unit, a transceiver unit and a power unit.
FiOStd evaluation board is chosen as the main controller of the SSN
for its low costs and high performance. The software coding of the
implementation was done using Simulink model and MATLAB
programming language. The experimental results show that the
proposed data compression technique yields recover signal with good
quality. This technique can be applied to compress the collected data
to reduce the data communication as well as the energy consumption
of the sensor and so the lifetime of sensor node can be extended.
Abstract: The purpose of this work is fast design optimization of
the seal chamber. The study includes the mass transfer between lower
and upper chamber on seal chamber for hot water application pumps.
The use of Fluent 12.1 commercial code made it possible to capture
complex flow with heat-mass transfer, radiation, Tailor instability,
and buoyancy effect. Realizable k-epsilon model was used for
turbulence modeling. Radiation heat losses were taken into account.
The temperature distribution at seal region is predicted with respect
to heat addition.
Results show the possibilities of the model simplifications by
excluding the water domain in low chamber from calculations. CFD
simulations permit to improve seal chamber design to meet target
water temperature around the seal. This study can be used for the
analysis of different seal chamber configurations.
Abstract: This paper introduces an adiabatic register file based
on two-phase CPAL (Complementary Pass-Transistor Adiabatic
Logic circuits) with power-gating scheme, which can operate on a
single-phase power clock. A 32×32 single-phase adiabatic register file
with power-gating scheme has been implemented with TSMC 0.18μm
CMOS technology. All the circuits except for the storage cells employ
two-phase CPAL circuits, and the storage cell is based on the
conventional memory one. The two-phase non-overlap power-clock
generator with power-gating scheme is used to supply the proposed
adiabatic register file. Full-custom layouts are drawn. The energy and
functional simulations have been performed using the net-list
extracted from their layouts. Compared with the traditional static
CMOS register file, HSPICE simulations show that the proposed
adiabatic register file can work very well, and it attains about 73%
energy savings at 100 MHz.